How to disassemble AG240 2PE

Does any one know how to disassemble the AG240 2PE ?
Haven't found anything about this topic yet.
No comments about void warranty etc. needed as I do not care

Please refer to the steps below:
1. Place the system horizontally on a flat and steady surface. Locate the two
screws that secure the stand. Unlock them and keep them for later use.
2. Push to remove the stand carefully and set it aside for later use.
3. Locate the ODD and its emergency eject hole.
4. Insert a pin or unfolded paper clip into the hole and push the pin firmly until the disk compartment opens.
5. Pull out the disk compartment and carefully detach the front bezel hooks.
6. Push the disk compartment gently backwards until it closes.
7. Locate the five screws that secure the rear cover. Unlock them and keep them for later use. Pull to remove the rear cover carefully and set it aside for later use.
8. Locate the screw that secure the rear i/o cover. Unlock it and keep it for later use.
9. Remove the rear i/o cover carefully and set it aside for later use.
10. Locate the three screws that secure the metal shield. Unlock them and keep them for later use.
11 .Push to remove the metal shield carefully and set it aside for later use.

Similar Messages

  • New bought MSI AG240 2PE (non touch) all in one game pc working well

      MSI AG240 2PE (non touch) all in one game pc working well. But its monitor's on screen display settings unreachable now from monitor's buttons. When İ first started the pc they were working normal. But a few hours later only working button was monitor's selector button between monitor shot down, HDMI in ,PC. When i try to press menu button it only shows volume shotting down on the screen and couldn't enter the menu settings. When i use monitor from hdmi in as TV, I still couldn't reach any menu settings and volume settings. Because of this, on hdmi in mode i couldn't hear voice from speakers of all in one pc. After turning pc mode, volume settings can be reachable from pc audio settings but not from monitor's buttons.Thanks for any idea and help.

    Dear,
    If this OS is form MSI, please find a notepad from the following route. C:\windows\system32\oobe\oem
    You could find a notepad by the name of releasenote, please provide to us.
    If this OS is installed by yourself, please provide detail information for this OS.
    OS version
    32bit or 64bit
    For Win7 OS:
    Please install MSI utility-WMIHOOK first.
    http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win7 64
    For Win8 OS:
    Please install MSI utility-QuickSetting first.
    http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win8 64
    For Win8.1 OS:
    Please install MSI utility-Gaming Control Center first.
    http://www.msi.com/support/aio/AG240-2PE.html#down-utility&Win8.1 64
    Thanks.

  • How to disassemble dv5 1144el

    Hello,
    I've got some thermal problems with my Pavilion Dv5 1144el: the temperature of the CPU is about 80°C (intel centrino2) even if there are no processes running. I wish to know if could be a good idea to disassemble the notebook trying to remove dust from the fan.
    I asked for help to the HP contact center, but the product guarantee has already expired: I need some schemes that can let me able to disassemble my DV5 1144el and to remove the dust.
    Thank you. 

    Here is the Maintenance and Service Manual for your series.
    Hp Pavilion dv5 Maintenance and Service Guide
    It gives step by step instructions on how to disassemble. 

  • How to disassemble Satellite L550-11H?

    Hi,
    Like the tittle says, I would like to know how to disassemble my laptop.
    I tried to remove all the screws but the damn bottom plastic didn't separate it self from the top plastic.
    Has anyone had this problem before?

    Hi buddy,
    For removing dust its really not necassary to disassemble the notebook because this can be done with compressed air spray. This spray can blow out the dust from cooling ventilators very easy and its cheap. You need only 5 minutes of your time. ;)
    Check also this interesting article about cleaning the notebook:
    [How to clean the cooling system of a Toshiba notebook|http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm]
    But let me give you a word of advice: Cleaning to remove dust is not covered by warranty so you must pay for this if you dont do it yourself!

  • How to disassemble a 7942 phone / clean hook switch

    Hello,
    does anyone have a guide how to disassemble a 7942/62 phone without damaging it?
    Would be nice to know for example to clean the phone or to repair / replace hook switch.
    Thanks,
    Bernhard

    Hi Bernhard,
    I just took apart a broken 7942 to test the method, but
    it seems like they may have changed the design at some point
    as this one had 9 screws on the back and a plastic clip on the side
    housing to the left of the Hookswitch. It seems like your 7942 may be
    more like the method described here
    http://atc.go0se.com/?p=1034
    Cheers!
    Rob
    "When it comes to luck you make your own  " 
    - Springsteen

  • How to disassemble AG2712A

    Does any one know how to disassemble the AG2712A ?
    Haven't found anything about this topic yet.
    No comments about void warranty etc. needed as I do not care

    Look behind there are holes with screws.

  • AG240 2PE mod bios request

    Helo,
    First of all please forgive me becuse of my english.
    I see there is an option to ask modified bios for MSI maschines, so I hope there is somebody who can help me. I have an AG240 2Pe AIO PC that have very limited bios settings. This maschine have both integrated and dedicated GPU and I'd like option to disable the integrated one completly if possible. Also would be great if the overclock allowed on the dedicated card.
    Thank You for reading and hope it was understandable.

    Quote
    This maschine have both integrated and dedicated GPU and I'd like option to disable the integrated one completly if possible.
    not possible, display is attached there
    iGPU is required to be able to see anything on the screen
    Quote
    Also would be great if the overclock allowed on the dedicated card.
    you can OC your dedicated card on the fly

  • How to disassemble the Camileo S10?

    I would like to hack the S10 to solve 2 problems:
    1) Put a wide angle adaptor
    Actually it is almost impossible, but removing the plastic part in front of objective allow to access to cylindrical part of it and fix a wide angle adaptor
    2)I need to fit the S10 on a RC model to keeping the camera in horizontal position instead of vertical.
    I successfully start to disassemble the camera removing the plastic black middle where the battery is located.
    I stop because I have no ideas how to unmount the video display
    Anyone have a link to Toshiba Service manual of the Camileo S10 or have an idea how to dissasemble it ?

    Hi
    I think disassembling a Camileo is not so easy and should only be done from an expert.
    If something is wrong with your camera you should go to the nearest authorized service provider. The technicians can disassemble it for you and they have such service manuals I think.

  • How to disassemble, repair and upgrade Toshiba notebooks.

    I was looking for info on how to upgrade the hard disk drive on my Satellite 1800-814 when I came across this website so thought I'd post it here for everyone. It seems to be exactly what I've been looking for, and not just for the Satellite but for other models as well.
    http://www.irisvista.com/tech/index.htm
    I apologise if it's been posted here before but I reckon it's worth a second mention anyway.

    Hi exseadog,
    thanks for that very nice info.
    Just a little advice for all guys out there:
    Never disassemble a machine that still has warranty.
    And also don't do it, if you don't have any experience on that. It's not always as easy as it seems.
    Bye

  • GE600 how to Disassemble?

    Hi!
    How can I Disassemble my msi ge600? I can't find a guide for this...
    greetings

    Disassembly guides can be found (where available) in the >>Forum FAQ<<
    https://forum-en.msi.com/faq/article/ge600

  • Tecra A8: How to disassemble the keyboard?

    I'd like to disassemble keyboard in my Tecra A8. Is there any disassembly guide on the web?

    Hi
    I dont think that you will find any manuals which describe the keyboard removing procedure. Such manuals are not official documents and only for the service partner usage.
    But in my knowledge the removing of the keyboards is not very difficult.
    There should be a thin cover above the keyboard. This cover masks 2 screws which secure the keyboard. You have to remove the cover and the screws careful.
    Then it should be possible to remove the keyboard.
    But be careful, the keyboard is connected with the short, flat cable to the main board.

  • How to disassemble LCD

    Hello.
    ifixit only shows how to remove the entire lid off the laptop (LCD included) with the hinge, which I have done.
    Here:
    http://www.screentekinc.com/lcd-removal-instructions_en,macbookpro,step2.shtml
    they show you how to do it with 15" MBP. I removed the two small screws, but I cannot pry the back off, at least not with the amount of force I am using.
    Should I pry harder, or are the 17" different, as another forum seemed to suggest?
    Thank you,
    MaW

    Handy maybe if anyone else is a little unsure.
    (They are pretty much all the same)
    http://www.laptop-power.co.uk/fitting-instructions.html

  • How to Disassemble Varying Multiple Repeating Records from Single Row

    I have a flat file that has hundreds of thousands of rows.  Each row is a new record.
    On each row there are about 23 elements that occur once per row and then there are two groups of 4-6 fields each group that repeat a certain number of times.  There is an integer field before each group that indicates how many times the group repeats
    0 or greater.  An few examples rows are the following. 
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|0|0
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|1|b|b|b|b|0
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|2|b|b|b|b|c|c|c|c|0
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|2|b|b|b|b|c|c|c|c|1|d|d|d|d|d|d
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|2|b|b|b|b|c|c|c|c|2|d|d|d|d|d|d|e|e|e|e|e|e
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|0|1|b|b|b|b|b|b
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|0|2|b|b|b|b|b|b|c|c|c|c|c|c
    I'd rather not do a custom pipeline if possible unless there is something already written.
    thanks in advance.

    Thank you for the quick response.  Would rather stick in biztalk if possible.
    I was able to get something like this to process through no problem.
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|1|b|b|b|b
    a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|a|0
    Just using and unbounded record with the group order type set to sequence. each row could have 0 to hundreds
    of groups.  And I've been able to process files with millions of rows.
    I'm wondering if there is a way to check the integer number in order to tell the group how many records
    there will be?
    Sucks that it is all the same delimiter.

  • How to disassemble NvRaid Array

    I'm currently running a NvRAID array (level 1) that I'd like to disassemble; the boot partition (Windows XP Pro) is stored within the array, too.
    What's the recommended procedure to disassemble the array?
    Can I just disable RAID in the BIOS and boot off one of the drives, and format the other?

    "Can I just disable RAID in the BIOS and boot off one of the drives, and format the other?"
    yes, for RAID1 should be possible.

  • How to disassemble Purity Pro?

    Hi,
    Bought my headset around two years ago. Recently managed to scratch quite nastily black piano paint on the top of the headset. Unfortunately Nokia Care does not support any repairs – they just send it to somewhere (China most likely) and get replacement.
    Financially makes no sense so came up with an idea to paint them. It’s just one piece, shiny black so should not be a problem. Now we hit a question – have you ever tried to disassemble Purity Pro?
    See the picture.
    Can easily unscrew metal pieces with NOKIA logo
    Part B seems to be easy to remove
    However, part A seems to be a challenge – stick quite hardly
    If I’m done with those two then rest should be relatively straightforward.
    Thanks in advance.
    Attachments:
    WP_20150426_21_00_22_Rich.jpg ‏220 KB

    Sadly this cant be discussed here.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Safari, iMail, iTunes, and Dashboard won't open

    A week ago, Safari, iMail, iTunes, and Dashboard won't open but other applications will, like Mozilla, iPhoto, Word, Excel, etc. Does anyone have any ideas of how I can get Safari and the other programs to open? Thanks for any help you can offer.

  • Convert a String to Decimal Format in European format

    Hi Experts, I am having a string as a context type for a input field, where the user can enter the Price, I need to convert the same into European format "###.###,00", I am using this below code to convert the string to decimal format User will enter

  • How can I extract the results of my squence?

    Hello, I'm a beginer of test Stand. I've created a main squence with LabView & TestStand, and works well, when it finish TestStand automatically creates my report. I need to extract these results of my sequence in order to create a custom document au

  • ORA-29855 - Error creating Spatial Index using a Stored Procedure

    Hi I am using Oracle 10gR2 database and I have written a stored procedure to create spatial index. But when i execute this function i get the following error message. ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-13249: in

  • Function to create spool in ECC 6.0

    hi all, We have function module " list_to_spool" in sap 4.6 c. what is the equivalent in ECC 6.0? thanks in advance.