How to disassemble Purity Pro?

Hi,
Bought my headset around two years ago. Recently managed to scratch quite nastily black piano paint on the top of the headset. Unfortunately Nokia Care does not support any repairs – they just send it to somewhere (China most likely) and get replacement.
Financially makes no sense so came up with an idea to paint them. It’s just one piece, shiny black so should not be a problem. Now we hit a question – have you ever tried to disassemble Purity Pro?
See the picture.
Can easily unscrew metal pieces with NOKIA logo
Part B seems to be easy to remove
However, part A seems to be a challenge – stick quite hardly
If I’m done with those two then rest should be relatively straightforward.
Thanks in advance.
Attachments:
WP_20150426_21_00_22_Rich.jpg ‏220 KB

Sadly this cant be discussed here.
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

BH-940 Purity Pro Voice sound problem

I purchased the BH-940 to be used as a headset in order to avoid office noice when I speak to customers. The problem is that my own voice does not go to the speakers and, because of the sound reduction and the tight ear pads, my voice coming from the room is very low. To put it short - I can't hear my selv very well when I speak.
Is it possible to boost the microphone sound transmission to the speakers in some way?

Alright, I have tried EVERYTHING and I solved it I think. At least it worked for me. It was quite tricky.
1. Connect the headphones with the a USB-charger and the 3.5mm cable.
2. Unfold up only ONE of the headphonerspeaker. Take a pen and push the little square button in the hinge of the headphone speaker (the one who is not folded). Make sure the little LED that tells you the battery charge level flashes (either green or yellow, if its red you need to charge the headphones) for about 10 sec.
3. Now browse to the Lumia 920's settings and choose bluetooth.
4. When the Purity Pro is shown in the bluetooth list try to connect. You will revieve a message that it wont connect. This is "normal" in this case.
5. Now the tricky part:
Try to connect your purity pro within your lumia and simultainously hold the <bluetooth button> + <multifunktion button> and pull out the 3.5mm cable. (the nose at the phone, both hands on the headphones and use your teeths to pull out the 3.5mm cable...) This should be done while you have only one headphone speaker unfolded. If it works the speaker-prompt should be heared and your charger LED should flash (either in yellow or green).
6. Now fold both of the headphone speakers.
7. Pull out the USB-charger.
8. Unfold them and it should be up and running.
Note: This is most likely, not the correct procedure... but this was how I did it and it worked. Feel free to make it easier...

Can't pin purity pro from accessories to start scr...

I have updated the accessories app on my lumia 920 and the live tile for my purity pro headphones didn't look right so I unpinned in and when i try and re-pin it it doesn't work. The option to re-pin it is greyed out. Any ideas on how to fix this?
cheers

That deb-file seems to have binaries compiled for debian against specific versions of debian packages, getting it to run on arch will likely be a problem.
It looks like proprietary software, so getting the source code is unlikely.
You can try contacting the makers and ask if they can provide a statically built version.

How to connect macbook pro to panasonic tv with hdmi cable

How to connect macbook pro to panasonic hd tv with hdmi cable

Hi m,
It depends which MPB you have and the inputs on the TV. The following assumes your TV has an HDMI input which will work with a computer.
This is if your MBP is from April 2010 or newer:
http://support.apple.com/kb/HT4241
First connect the adapter to the MBP and the HDMI cable from the adapter to the TV, then go to System Preferences > Sound > Output > select HDMI.
Or if your MBP is older than that and you have a Mini DisplayPort, you can use something like this: http://eshop.macsales.com/item/NewerTech/CBLMDPHDMID/
If it's older than that, for video you need a DVI or mini DVI to HDMI or whatever input your TV has. For audio, you need a 3.5mm stereo mini plug to RCA or optical (Toslink), depending on what audio input your TV has.

How to connect macbook pro to tv

How do I connect my macbook pro (2 -3 years old) to a tv? Bought an apple HDMI connecter, bought cable to connect to it and to tv, connected them but nothing happens.

how to connect macbook pro to tv

How come my macbook pro wont play dvds?

how come my macbook pro wont play dvds?

Don't know!
Please describe in detail all you have attempted to do in order to resolve the issue.
Apple Portables: Troubleshooting the slot load optical disc drive

Help on how to fix macbook pro 13inch 2010 (cpu 1 caller 0x47f5ad)?

help on how to fix macbook pro 13inch 2010
Hi, I need some peoples help on fixing my laptop. I have a macbook pro 13 inch 2010 model, and it refuses to boot into either osx or windows. Every time I prevoiusly treid to boot into mac osx I got this error "panic (cpu 1 caller 0x47f5ad)". there is an image below. and when I had treid to boot into windows (bootcamp) I got this error "A disk read error occured Press Ctrl+Alt+Del to restart". I have treid to restart the computer and gotten both these errors agian. The strange things is this deosn't always happen, sometimes I don't get any errors, and it just has the apple logo whith the spinning loading thing happening below (I left this for an hour and it still kept spinning, and never loaded). Other times it just show white whith no errors but never loads, sometime it lets me alt to select which os to boot into (nether work), but other times it just freezes and shows a mouse cursor on the white background. it's not consistent.
Most recently it has a flashing folder on a white background. I treid inserting my osx disc and went into disc utility but it doesn't detect my hardrive. It may be a faulty hardrive or sata cable but I dont know (I have links below). I was recently (well for the first time), defragmenting my windows partition, it hit temparatures of 80-85C, and stayed at that for several hours throughout the defragmentation, would this have damaged it?
I have scoured the internet and found many people whith very similar problems to me but none whith the same, and A lot of people saying that if you get the error you should just use a time machine backup, the thing is I don't have a time machine backup. The internal hardrive I am currently using on my laptop is a seagate 640gb 5400rpm (it's not an apple harddrive). every thing else it standard, standard ram and no overclocking, I was running 10.6.8 snow leopard, and windows xp profesional 32bit (split 320gb each, whith about 10gb spare on each parttion).
It would be greatly appreiciated If any one could shed some light on what I should do. I need the laptop working whithin the week (for my tafe work), but If I have to reinstall the OS's and programs it could take a long0I have a lot of programs and that could take a month. not to mention The fact that the hardrive might be completly fine and it's just a faulty sata connection. but then would I still be getting an error if thats all thats wrong?. and if it is just the error is there anyway I can fix it whitout doing a fresh install, there a error reading document blow but I cannot make heads or tails of it. I also have almost no money to afford getting it fixed.
also one last thing, I stupitidely inserted my mac osx disc 95% of the way into my macs slot loading drive when it was powered down (off). when I turned it on it sucked it in fine, but would that have caused any damage to the disc or laptop (I cannot eject the disc to check)
I have images of many of the things I described below. So any suggestions.
I have also posted this on several other websiets if that helps)
Photos
http://www.flickr.com/photos/100089102@N08/
"panic (cpu 1 caller 0x47f5ad)" error issues
http://forums.macrumors.com/showthread.php?t=1177233
http://reviews.cnet.com/8301-13727_7-10344626-263.html?tag=mfiredir
https://discussions.apple.com/thread/3256029?start=0&tstart=0
http://www.mac-forums.com/forums/switcher-hangout/258078-macbook-pro-will-not-st art-up.html
https://discussions.apple.com/thread/3965618?start=0&tstart=0
Hardrive issues
https://discussions.apple.com/thread/4225754?start=0&tstart=0
http://www.mac-forums.com/forums/other-hardware-peripherals/242064-hard-drive-no t-showing-up-disc-utility.html
How to read errors
http://developer.apple.com/library/mac/#technotes/tn2063/_index.html
other websites
http://au.answers.yahoo.com/question/index?qid=20130808212838AAYDeTk
http://forums.macrumors.com/showthread.php?p=17706929#post17706929

The problem may be that your macbook is'nt set to 'mirror image' if you go into settings, onto 'displays' there should be an option within, once youre connected, to 'mirror image' if you check this box, then the problem should be sorted, if not then maybe a dodgy cable or adapter.

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks?

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks and i have the box checked under network settings?

Random35,
does your wi-fi router filter access by MAC address? If it does, then have you added your MacBook Pro’s MAC address to your router’s whitelist of acceptable MAC addresses?

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

I just upgraded from Express to Pro. When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. "Open With ..." says Express is the default. How can I make Pro the default instead?

I just upgraded from Logic Express to Pro. When I open a project in Finder and neither Express nor Pro are running, it always opens in Express. I now want projects to open in Pro. "Open With ..." says Express is the default. How can I make Pro the default instead?

Well, when I've done things like that it always sems like a good idea to keep an application that you know the file will definitely open in...

How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?

Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
Regards

Aw, and I forgot, being in Thailand, they do not sell the installation DVD.

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

How to backup MacBook Pro without AirPort Time Capsule or External hard drive

This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
The alternative is to get a second monitor because I currently only use one 21" monitor.
I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
Any advice or input would be greatly appreciated. Thanks!

Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

How set up macbook pro Internet router?

how set up macbook pro Internet router?

But isn't the MacBook Pro connected to the modem and being used as the router? You can only share an Ethernet connection wirelessly. You only check the box to share the Ethernet connection to Wi-Fi. Do not check any of the other boxes. You select Ethernet from the dropdown menu as the connection you will share. Your preferences should look like this:
The only difference will be that yours will show just Ethernet, not Ethernet 1.

How to Charge Macbook pro unibody? correct way

Hi there, I have a question. just bought my Macbook pro unibody last week.
I want to know how to charge Macbook pro the correct way ?
When im working. should I charge all the time ? I should wait until the battery drain 10% left ?
When is the best time to charge the battery 75%,50% or less that 10% ?
Should I turn off asap when the charger once the green light turn on ? should I leave overcharge ? normally I charged mac at night which more than 8 hour charge , is this good ?
Thanks guys.
E

Here is apple's instructions in calibrating the battery KB Article
As for leaving it plugged in, that's the normal process most people do, there is circuitry in the computer to ensure the battery does not get over charged. Aside from calibrating it, I'd avoid any deep cycles, that is draining it completely, you're better off plugging it in when you have the opportunity and not wait until the battery is nearly drained. Deep cycles can shorten the life span of the battery.

How to disassemble Purity Pro?

Similar Messages

Maybe you are looking for