How to disconnect airport wifi option on timecapsule? can s.o. walk me thru the process?

Need to disonnect airport wifi option from timecapsule, keeping timecapsule as back-up. How to route from modem to iMac, to include timecapsule and printer?

All you need to do is bridge the TC.. you don't need to turn off the wireless as once in bridge it will direct wifi to the modem correctly.
If you are really on Leopard as your profile there suggests.. just open the airport utility. Manual setup.
Go to the internet tab.
Down the bottom .. connection sharing.
Select off, bridge mode.
Update the TC.
Then you can go to the wireless tab in the main airport section and change it to off.. or simply set it to a different channel manually and that will give you 5ghz access for other clients which the present modem is unlikely to do.
Bob (top bloke here)..
Has a post with pictures.. and very helpful if you moved to lion..
https://discussions.apple.com/thread/4074627?tstart=0

Similar Messages

Why is my WiFi connection dropping as soon as I walk out of the room where my router is located? Running OSX 10.6.8

Why is my WiFi connection dropping as soon as I walk out of the room where my router is located? Running OSX 10.6.8
Had ISP provider here multiple times. They switched out the router/modem on 4 occasions. They ran new fiber optic cables to my house. They sent a PC tech here with a Mac, and he was able to get a strong wireless connection, but mine, he said, was "weak."
I called Apple support. They had me remove the battery and clear the PRAM. It didn't help.
There's no point in having a wireless connection if I cannot walk 20 feet away from the router without losing the connection.
Do I need a new Airport Extreme card?
How much would it cost to get one, and what is the process of getting it installed? (no longer under warranty)
Deb Goonan

My ISP replaced my router FOUR times. I don't think that's the problem.
We already tried chanign the channel multiple times, channels 1, 6, 11 and even 9 and 4
No luck

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the WIFI built into the Imac??

I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??

jason1074 wrote:
I recently bought a new Imac. Do I have to set up a wireless router or can my other devices connect thru the Wifi built into the Imac??
For the Internet, you should set up a router on your modem, this router will route the packets to any device on the local area network.
If you use the iMac as a router, like if you connect the Ethernet cable from your modem to the iMac, then broadcast a Wifi signal, the iMac will have to remain on all the time, at full power. Thus drastically shortening it's lifespand.
A router is only about $100 or so, offers much better security as it's like a large guard, someone has to hack through router first to get your iMac or other devices.
If it breaks, you buy another 5 years later for another $100, so your not placing all that always on wear and tear on your expensive iMac.
Apple's airport routers are pretty good, easy to set up and have automatic firmware updates, plus music sharing etc.
Set up properly you will be very secure
WiFi security issues, at home and WiFi hotspots

HT201210 how to fix my wifi option and get it to turn on again wont work and have tried everything i can think of

Just got a new iphone 4 and when i got it it was always hard to get on the wifi but the other day the option to even get wifi went grey and now it wont let me have the option to get on the internet. i have tried eveything i could to get it to work again but it just wont work. hopefully someone can help me out so i can get my internet back on my phone again because i use it alot .

http://support.apple.com/kb/ts1559
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.

How to disable airport so that standard users can't reenable it ?

Even when I disable airport interface from the command line :
sudo ifconfig en1 down (what requires sudo privileges)
a standard user can reenable it ! Strange behaviour compared to linux or windows OS.
If someone knows how to block airport, please let me know.
Thanks

Hello,
Thank you for the answers.
All users are standard users.
The option I was searching for is in System Preferences - Network - AirPort - Advanced - Require admin password for : Disabling or enabling AirPort. The other two options could be useful too.
I think I'll add this to my base image. In the meantime I'll try to apply the settings via Apple Remote
I didn't find the exact settings to enable the 3 options from the command line, if you know how to do this please tell me.
I found a few very useful commands though :
Disable/Enable airport from the command line
networksetup -setairportpower en1 off/on
That's the command I will use when all machines will be configured with "Require admin password for : Disabling or enabling AirPort". If it's not configured the user can reenable airport.
Disable/Enable airport service from the command line :
networksetup -setnetworkserviceenabled AirPort off/on
That's the command that can help when you haven't block the users yet. A standard user can reenable the service but he needs to know the command as well as how to use terminal.
p.a

Wifi option is gray can't click on it to connect so what do I do to get on Internet ???

I have an iPod Touch. I spilled some coffee on it while in the car. I dried it off with paper towels right away and when I got home I put it in a bag of rice for 2 days. When I took it out to use it the wifi option in Settings is gray and not black. When I try to click on it nothing happens. No wifi connection. I tried connecting it to my computer and resetting the software following directions on iTune. Wifi option is still gray.
Do I have a problem with software and or hardware? How do I fix the problem. Now I can only use the iPod Touch for Music and I would like to use it on the Internet. Any home solutions for this problem?

Try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How to add java script option in firefox as this is not available in the menu of tools menu and content of firefox

Dear sir,
I am regular computer user and firefox is my default web browser. But it is seen that my web browser is not having the option of enable java scripts as I am learning web page designing. Could you please tell me how to add this option in my web browser on mozila as I am interested to work mozila all the time. I can add this by using internet but that is not always easy and also not sure when this option is enable or disable. Please guide me resolving my problem.
Regards,
Mohammad Hossain

You can no longer do that via the user interface, but you need to check the related pref on the about:config page.
The javascript.enabled pref should be true on the about:config page to enable JavaScript.
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
See also:
*QuickJava: https://addons.mozilla.org/firefox/addon/quickjava/

Can someone walk me thru the procedure for removing a wifi profile - Thank you in advance for your help

I have a T-Moble hot spot - new - it connects to my ipad but does not connect to the internet for my gps use - it even will disconnect from my ipad often - the t-moble guy said I need to remove the wifi profile from my ipad and then restart my hot spot - would someone help a novice --walk me thru how to remove the wifi profile - thank you in advance!!! Steve

Here are two suggestions:
1. Go to Settings > WiFi. Then for each white arrow you find inside a blue circle on the right, click it, and then click "Forget this network" on top. Repeat for all occurrences of arrows in circles.
2. Go to Settings > General > Reset > Reset Network Settings and press that button.

I cannot print from my iPad using airport express. My printer is not AirPrint compatible but is connected to airport express thru USB port. My laptop can print with no problem thru the express unit. My lap top is no a mac.

Good day, my iPad does not seem to pick up my printer. My printer is not AirPrint compatible but is connected to my airport express thru the USB port. My laptop which is windows type connects to the printer via airport express thru bonjour and this work well. My iPad does not pick up my printer thru the airport express. I have read about different software that you can download but this seems to be only if you are using a mac. I know my express is working fine as I can use airplay thru my iPad. Any ideas? I do not want to go to the expense of changing my printer, when there was no mention in the express details that your printer had to be AirPrint compatible or indeed wireless.

See this article to learn how to print from an iPad to your USB printer when you have a PC. The PC will need to be running when you want to print from the iPad.
Print from your iPad with PrintCentral | How To - CNET

Infopath submit - how to hide - Save as dialog box - You can only save this file to the current site

HI,
I have a infopath form. In the submit options, i have used the below:
submit options -
sharepoint document library
Data connection - Sharepoint Library Submit
Doc library - lib location
File name: concat("User Info - ", ResourceName, "-", PersonalID)
Allow overwrite if file exists is checked.
When I try to save a record, I am getting a popup:
Save As:
You can only save this file to the current site
File Name: textbox
save location: doc lib.
save, cancel buttons.
How to override this save as option(save as option should not be shown to user), and save the file using the file name mentioned?
Thanks

Are you clicking "Save" when you're using the form or "Submit"??
You should be using "Submit" and it will ... submit your form to the document library with the file name you specified.
To disable the "Save" button, click on "File" then "Form Options". Under the "Filler Features" area you can uncheck the box beside "Save and Save As". Click OK then re-publish your form.

How do I finish updating my iPhone4 to iOS7 when it closed down during the process as I had it tethered to my computer and I assume the computer needed the internet to complete the process?

How can I finish updating my iPhone 4 to iOS7 when I had it tethered to my computer (computer using the connection from my phone) and during the updating process, when the phone restarts itself, I lose the internet connection (silly me, not thinking of this) and now it can't finish the process. Can I use a friends computer if I log into my iTunes account...as I downloaded it ok...just cant finish the update. Any ideas?
Thanks
K

If this is the third time that this has happened to you, I don't blame you for being upset. On the other hand, after the second time, you should have learned the importance of backing up your iOS devices and apparently you didn't do that or you wouldn't be in such a panic.
You cannot downgrade the iOS, You have to restore your phone now and all of the contents will be erased. I think you know that though, and I think that you know that there is no way around it either.

My Itunes wont start and at the same time the wifi option on my iphone has greyed out, what is the problem?? This is very frustrating

my wi-fi has greyed out, how can i fix this?

The WiFi radio has failed. The phone will need to be replaced.

How do i have a image thumbnail that can zoom to fullscreen without having the arrows for the gallery sliders?

im only looking to do it with single images maybe a caption , but wothout having to have teh area where the dots/nubers / sliders go
if i just drop an image son it doesnt seem to offer trhe fullscreen option
any ideas?
arby

iBooks images don't zoom or respond to pinch any way I would expect. They will expand a bit, but snap back to size when released. Even worse, you can't make a picture a link.
I have heard that you can make an empty text box, lay in on a picture, and then link that, but I haven't tried it. Even if, I don't know if you could link it to an object in the book file. I think we're out of luck for now on this.

How I can change default user that executes the process chain in BW 3.1?

In others versions is possible the change it in: "Process chain" >>> Attributes >>> Execution User >>> tick "Current User"., but in BW 3.1 donu2019t has this option. I need to change the user default (ALEREMOTE)

M,
Equally, I canu2019t change the user using SM37 transaction, because when I schedule a process chain, occurred an error:
"Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE"

I am trying to backup my wife's phone on icloud. But whenever i do, the process begins and then about 5 mins later it stops and it says it was incomplete. I tried leaving it to back up overnight, using a different wifi, etc but no luck. Help!

Here is more info - she has the iphone 4 16GB. we purchased the additional space on icloud, so there is more than enough room for her to back up her 8.5 GB on the 15GB of space. It is up to date for the iOS. I have the same phone and have no problems with mine. i have tried turning it off, etc.
Thanks in advance for any help!

Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

How to disconnect airport wifi option on timecapsule? can s.o. walk me thru the process?

Similar Messages

Maybe you are looking for