How to disconnect incoming call in ios7 when iPhone is locked?

Press the Sleep/Wake button twice quickly on the top of iPhone

Similar Messages

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

How to disconnect incoming call when the phone is locked...!!?

I feel that the major bug in iOS 7 is, we cannot disconnect the incoming call when the phone is locked. I dont understand whats the reason behind not fixing this issue...! My iphone lock/unlock button is getting spoiled day by day as am using that button evert time to disconnect the incoming call when the phone is locked.
Apple, please give me the genune reason for not fixing this issue, else fix this ASAP.
Thanks.

https://discussions.apple.com/message/23151421#23151421

How to disconnect incomming call on iPhone 3GS with 4.3.2

I'm using iPhone 3GS but unfortunately I have no idea how to disconnect the unwanted incomming call.
Please guide me...!!

Ummmm, do not answer the call.
Or do you want to know how to block certain calls? That is a carrier function.

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a big photo for an incoming call?? I have installed iOS 7.1.1

I have iPhone 5s. when an incoming call on the screen iPhone I see a small photo, how can I make a great big photo for an incoming call?? I have installed ios 7.1.1

Sorry, you can't. Design change with iOS 7.0. Tell Apple you don't like this here:
http://www.apple.com/feedback/iphone.html

Why the 'decline' option not present in the lock screen for an incoming call in ios7?

Why is there no call decline option on the lock screen for an incoming call in IOS7??

Yeah... One workaround is double-click the lock button. But still it's stupid. The "Decline" is available only when screen in 'unlocked'. They think, you only need the to decline only when you are busy doing something on the iPhone, else need not to decline the call i.e. when your screen is locked.
WTH, is my phone the only thing in the world, I could be busy with to decline??

How to limit incoming call on B-ACD CME?

I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
Iwan

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

How to block incoming call on iphone

how to block incoming call on iphone

Contact your carrier & see if they offer call blocking...some do, some don't. There is no other way to block calls on any cell phone.

How to change your Administration Server password when you're locked out

How to change your Administration Server password when you're locked out
The Netscape server products are all managed by a single administration
server, which gives you a web forms-based interface you can use to
configure them, start/stop them, check their logs, and so forth.

There are three levels of protection that keep the general public from
being able to get into your administration server and mess up the
configuration of any Netscape servers you have installed:

<OL>
<LI> Obscurity: Your administration server can run on any port you'd
like (usually something between 81 and 30,000), so if an attacker
doesn't know what port to find your admin server on, he can't get
into it.
<LI> Host restrictions: You can tell your admin server to only allow
connections from specific hosts, and to reject all other hosts.

<LI> Password protection: Even if a user connects to your admin server
from a valid host, he won't be allowed to get into even the first
page unless he presents a valid username and password.
</OL>

If you, the legitimate administrator of your web server, are unable to
access the administration server (if you forgot your password or the
admin port number or if you accidentally locked your own site out),
then here is how to get past each of these levels of protection:

<OL>
<LI> If you don't remember what port your administration server is
running on, just look in your "ns-admin.conf" file, which is in
the "admserv" directory under your Netscape server directory.
(For 1.x web servers on Windows NT, run "regedt32" and go to the
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration" section).
You will see a "Port" entry there that specifies what port your
admin server is on. You can change this value if you want your
admin server to run on a different port, but make sure you restart
the admin server after you change the value.

<LI> If your admin server is complaining "Unauthorized host" when you
try to connect to it, then you can open it up to all sites by
going into the "ns-admin.conf" file or the "Administration"
section of your NT registry, as described above, and deleting the
lines for "Hosts" and "Addresses" (either one of those might not
be present) then restarting your admin server (on Unix run
"stop-admin" then "start-admin"; on NT go into the Services
control panel and stop/start the "Netscape Administration" or
"Netscape Admin Server" service). You will then be able to get
back into the admin server, where you can then try new settings
for your host and address restrictions if you wish.

<LI> If you have forgotten the password to your admin server and now
you can't log into your admin pages, all is not lost! Go into
your "ns-home" directory, and into the "admserv" directory under
that. You should find an "admpw" text file containing a simgle
line of text, something like this:
admin:lnOVeixulqkmU
The first part of that line is the name of your admin account
(usually just "admin"), and the second part is your admin
password, encrypted. Edit this file to remove the encrypted
password so that your file looks like this:
admin:
Then shut down your admin server, bring it back up again, and log
into your admin server but don't give any password. It should let
you in, at which point you can then go to the appropriate
configuration page to set a new admin password, and then you're
back in business.
</OL>
Note that because it is so easy to change the admin password this
way, it's good to periodically make certain that your admin
password file and your web server's configuration files are not
left world-writable, and that only trusted people have access to
them. (By default they're not world-writable, but it's good to
make sure of this from time to time.)

If you mean that yu forgo the password for yur encrypted backup then you can only:
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device.
Above from:
http://support.apple.com/kb/HT4946

How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

How do I retrieve call history from my iPhone 4S? It only seems to log for about a month and I need an earlier date?

If you have backup of your files, you can get your call history back as long as you sync iPhone with iTunes frequently.
OK, the first thing you are required to do is close the function of "prevent iPhone from syncing automatically." in iTunes, avoiding to sync iPhone again.
Now, connect your iPhone to pc and open iTunes.
iTunes> preferences> devices
All the backup data in iTunes will be displayed.
Then,click the File menu and select Devices > Restore from Back up
your iPhone will restart and you can find them back.
This method only can find back the latest history, to get back the old, you should turn to a third party program for help.

HT5463 Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is

Hi I am on an iphone 5 IOS7 and when I look at the 'Silence' setting at the bottom of the Don Not Disturb' screen - then even though all of the settings on that screen are off i.e. not green - the 'Silence' -'Only when iPhone is locked' setting is tickedP

Chris thanks for your reply, if none of the Do Not Disturb settings are switched on - then am I right that this setting will have no effect. I.e. I want my phone to ring at all times, so have turned off all of the do not disturb settings

Can I hide camera function when iphone is locked?

After the update IOS% i know have the camera available even when iphone is locked. How do I remove/hide it from locked screen?

I've owned every iPhone model since the original and have never needed to passcode lock my phone. Not worried about it after all these years. I'm the only one who has ever used it and I don't leave it lying around anywhere. It stays in my pocket when not being used.

Can we import photos from iphone to windows PC when Iphone is locked with passcode?

Hello,
I am using Iphone 5 running IOS 8.1.2.
I recently connected my Iphone to my friends windows laptop to import the photos and videos.
I observed a strange behaviour. I was able to import photos even when my Iphone was locked with passcode.
Can anyone explain me why and when can this happen?
I personally felt, when Iphone is locked with passcode import should not happen.
Please correct me if I am wrong.
Best,
Kuldeep

A small edit to my above question.
For importing photos I right clicked on my iphone in windows explorer and selected "Import photos and videos" contextual command.
I didn't open it to see DCIM folder.
Hope I receive some information on this.

HT4061 how do i find out which company my iPhone is locked to?

how do i find out which company my iPhone is locked to?

Then there is no wy to find out. Try taking it to an Apple store genius bar and see if they can help.

How can i know at what id my iphone is locked , , because i have more then id

how can i know at what id my iphone is locked, because i have more then id
<Personal Information Edited by Host>

Try them all.

How to disconnect incoming call in ios7 when iPhone is locked?

Similar Messages

Maybe you are looking for