How to disconnect the sync between my iPad and iPod.

How do I disconnect the sync between my iPad and my iPod?

Read here & turn this off:
http://support.apple.com/en-us/HT202530

Similar Messages

How to turn off syncing between My iPad and iPhone

Every time I send an iMessage or text message from my iPhone, it shows up on my iPad's iMessage app. This also works vice versa. This is quite annoying because if I get a text message (or phone call) while I'm out, the iPad will ring and give of all my notification sounds at home.

Hi Joshua.Clapper,
I understand you no longer want to receive messages and sms on your iPad. You can do this by disabling SMS Relay, or by signing out of iMessage entirely. The following articles offer further guidance:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
SMS
With Continuity, all the SMS and MMS text messages you send and receive on your iPhone also appear on your Mac, iPad, and iPod touch. Even if the person you’re communicating with doesn’t have an iPhone. And regardless of what phone they have, you can reply from whichever device is closest to you, including your iPad or Mac. You can also initiate a conversation by clicking a phone number in Safari, Contacts, or Calendar.
To use Continuity for SMS and MMS with your iPhone and your Mac, iPad or iPod touch
Your iPhone, iPad, and iPod touch need to use iOS 8.1, and your Mac needs to use OS X Yosemite.
Sign in to iMessage on your iPhone, your other iOS devices, and your Mac using the same Apple ID.
On your iPhone:
Go to Settings > Messages > Send & Receive > You Can Be Reached By, and add a check to both your phone number and email address.
Go to Messages > Text Message Forwarding, and enable the device(s) you would like to forward messages to.
Your Mac, iPad, or iPod touch will display a code. Enter this code on your iPhone to verify the SMS feature.
If you can't send or receive messages on your iPhone, iPad, or iPod touch - Apple Support
Turn iMessage off and back on
Go to Settings > Messages and turn iMessage off
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Different subset of songs to sync between an ipad and ipod

I have an ipod classic that is large enough to accommodate my entire itunes library. I don't want, however, to load the entire library of songs on to my new ipad. It won't fit in any event. Can I set up itunes, ipad, and ipod so that when I sync my ipod, all the songs are loaded but for the ipad, only those songs I want on the device are considered? In other words, I only want, nomially, 16-20 GBytes of songs on the ipad, chosen by me, and all 64 GBytes on my ipod.

Sync selected playlists. iTunes will recognize each device as unique. You can continue to sync everything to the Classic and then selected playlists to the iPad. The current version of iTunes also allows you to sync selected artists and albums. These options will be on the Music pane in iTunes when the iPad is connected.
Best of luck.

HT204053 I have set up i cloud but my calendars wont sync between MacBook, Ipad and iPhone. Is there a refresh style option or does anyone know what to do to make sure the calendar on my MacBook is the one that the other devices reads. Thanks everyone.

I have set up i cloud but my calendars wont sync between MacBook, Ipad and iPhone. Is there a refresh style option or does anyone know what to do to make sure the calendar on my MacBook is the one that the other devices reads. Thanks everyone.

Don't spend a lot of time trying to change it. It's an iCloud problem that's happened before, and when it happened in August it went back to the correct colors in a few days. Just be careful when you add new items to the calendar to use the right calendar (even if the color is wrong), otherwise you'll have things out of synch when the correct colors come back.

How can I synchronize the app between my iPad and iPhone?

How can I synchronize the app between my iPad and iPhone?

Hi,
May i know which app in particular you are taking about.
If that is Adobe Reader you need to sign-in in Adobe Id and password and that should be it.
Regards,
Ajlan Huda.

My note has stopped syncing between my ipad and iphone

Note has stopped syncing between my ipad and my iphone. Can anybody help please?

Settings>icloud. Assuming you have already set up the connection to icloud (ID, password), then turn on Calendars on that screen.
If they don't appear, then log into icloud.com using a computer's browser and look at the calendars page. If empty, then you are not syncing calendars from your device to icloud. If there, then be sure Calendars is turned on in Settings>iCloud or System Preferences>iCloud.

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

My itunes will not! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods thank you!

my itunes will not open! is giving me error7(windows error 126) and is stilling me MSVCR80.dll is missing and i tried downloading itunes like 6 times and is saying the same thing. Please help! i need to sync my kids ipads and ipods
thank you!

Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

I need to know if the sync related to ipad and backup to itunes

I need to know if the sync related to ipad and backup to itunes

That statement makes no sense.
Post in your native language.

How to manage the space between a table and its title?

Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
1. Titles were separated by a return that is not visible... (any code is revealed by ID)
2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
Grep cannot see the end of paragraph in the tables's title.
It another method?
Basically, how to modify the space between a table and ists title

I think you and Bob are not in synch here.
Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

How to remove the link between Profile name and corp net account after their disassociation

Hi there,
How do I remove the link between Profile name and corp net account after their disassociation ?
I would like to make remove the link between 'Viv Lingaiah' and
[email protected] Also, I would like to keep 'Viv Lingaiah' and associate with my outlook id and corpnet account.

Logon to your live account here
https://account.live.com/summarypage.aspx then under aliases you can add an alias and promote it to primary.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

BCT - how to find the difference between installed BCT and the newest BCT?

Hi,
How do I find the difference between installed BCT and the newest BCT?
or find a description of the newest BCT?
Thank you.
- Gunnar

Hi,
Thank you for your answer.
I am aware of the possibilities you mention.
I am looking for a way to find the parts of the business content that has been modified since I installed our current version WITHOUT installing anything.
That is for example:
If F&R business content has been moved from 3.x technology to 7.0
If there is changes to the F&R content at all
-> if our current version of business content already contains the newest version of Business Content for F&R, then it is not a prerequirement to an F&R project that we update business content.
The possibility to see that the only changes might be in the area of SAP HCM ...
Thank you.
- Gunnar

How to isolate the signals between TX/RX and RX2 on the USRP N210?

Hello everyone,
I want to use one USRP N210 to transmit and receive signals simultaneously. But when I try to transmit signals from TX/RX and receive signals from RX2(the transmitted and received signals are on the same center frequency), I found that the there are signals leaked from TX/RX to RX2. What can I do if I want to isolate the signals between TX/RX and RX2?
Thanks very much!

Hello -
I believe two questions are being asked on this thread:
1. Isolation: The internal switch provides about 30dB of isolation between TX/RX and RX2. As with most transcievers, if you transmit and recieve on the same frequency at the same time you will recieve your own transmission as well.
2. Spurs: The USRP represents and optimized price vs performance and some images and spurs will occur. Often they can be predicted as you mention. One thing you can do is use the CORDIC to acquire a signal at IF and then digitally shift I and Q to the ceneter frequency and bandwidth of interest. This is done by setting the 'lo' via a property node and 'center frequency' to different values.
Other NI RF instrumentation options are available if you're looking for RF performance. The NI 5791 was recenty released and may be of interest.
Best Regards,
Erik

How to disconnect the sync between my iPad and iPod.

Similar Messages

Maybe you are looking for