How to display a duel monitor in my Macbook pro?

Hi recently I brought a 22 inch LCD monitor I would to make a duel monitor with my laptop how do I do that cause i have try out many way but still not display out. Please help.. Thanks in both window and OS

I set mine up in OSX and it works fine in Windoz - both under Parallels and with CrossOver.
Don't understand why yours doesn't work - unless you are using dual boot. If so have you gone into Windoz Control Panel and set up the monitor or installed the driver that came with the monitor. Windows now says that drivers aren't needed but many manufacturers include them as they do most of the work for you.
Hope this is of some help.
rhys

Similar Messages

  • How do I connect two monitors to my macbook pro?

    How do I connect two monitors to my macbook pro?  This question applies to both DVI and VGA, as I might have to work with multiple sets of monitors.

    The MacBookPro only has enough horsepower in the video card for one external monitor.
    If you want two or more, you need a MacPro.
    Or a MacBook Pro and a Remote Desktop controlled MacMini.
    http://www.apple.com/remotedesktop/

  • How do I add external monitors to my MacBook Pro?

    What is the best way to use two external monitors with my MacBook Pro (17-inch, Mid 2010) with minimal latency?

    The MacBookPro only has enough horsepower in the video card for one external monitor.
    If you want two or more, you need a MacPro.
    Or a MacBook Pro and a Remote Desktop controlled MacMini.
    http://www.apple.com/remotedesktop/

  • How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

    Hi everyone,
    I recently purchased a brand new 15"  MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
    Bummer!
    So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
    I've looked around and haven't been able to find a good answer.
    Thanks for your help!

    Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
    http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

  • How to setup dual external monitors on a MacBook Pro 15" A1398?

    Need to setup dual monitors for my new MacBook Pro 15" Retina Display A1398. I am in instructional designer and need the larger display from dual monitors. I think the best way is to connect using a Thunderbolt to HDMI adapter in the two Thunderbolt ports or HDMI out of the one HDMI port and the other using a Thunderbolt to HDMI adapter.  I have two Thunderbolt ports, two USB ports and one HDMI port. How do I setup OS X Mavericks for this as well. I want to run it in clamshell mode. Wondered if there are any better or easier ideas?
    With peace and love,
    Sam K.

    Hi! I recommend you using both thunderbolt ports with their HDMI adapters, i don't know why but in my case it has worked better than having one monitor connected on one thunderbolt port and another on the HDMI port. As for the clamshell mode I recommend you this articles: Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display and http://osxdaily.com/2012/06/08/quickly-enter-clamshell-mode-with-an-external-dis play-in-mac-os-x/.
    This are a few recommendations:
    1. Use a usb mouse and keyboard, because sometimes bluetooth ones are not that trusty
    2. You could buy one of the fancy things (you can see one on the second article) that hold your macbook up to prevent overheating. If you can't afford one or you don't to buy one, you can prop your macbook with some books on the side of the union between the lid and the keyboard (i don't know the word in english) and a very heavy one on the other side.

  • How to set up multiple monitors on a MacBook Pro

    Does anyone know how I might be able to set up more than one monitor to my MBP?
    Is there a splitter available, or some other means of connecting additional monitors? Any advice would be appreciated. Thanks!

    Hi,
    still the best solution although pricey http://www.matrox.com/graphics/en/products/gxm/dh2go/
    There are some USB-connected graphics expansions avaiable for Mac, but IMHO these are still not up to the task speedwise.
    Regards
    Stefan

  • How Can I Connect 2 External Display Monitors to a MacBook Pro? Help

    I want to know if I can (and How to) connect 2 external display monitors to a MacBook Pro... late 2006 & the new Unibody MBP.
    I'll appreciate

    Requires additional hardware - the Matrox DualHead2Go. For the late 2006, you'd need the DualHead2Go Digital Edition, and for the unibody you'd need the DualHead2Go DP Edition, with appropriate cabling (and a DVI-to-VGA adapter for the late 2006 MBP).
    http://www.matrox.com/graphics/en/products/gxm/dh2go/

  • I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen.  How do I get it to open programs and act like a monitor?

    Dear Jean:
    It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
    Open System Preferences.
    Choose the Displays Icon
    There will be several tabs to choose from pick Arrangement
    Drag the toolbar to desired display
    Let me know if this helps at all!
    Lance

  • How do i connect three external monitors to a macbook pro?

    How do I connect three extrenal monitors to my Macbook Pro?

    I have a USB to DVI adapter from kensington. I use to use it to power at 14" display.Moving windows around had some tearing and lag. Typing lagged, but it was use-able. It was fine for displaying diffrent stats. The OS treated it as it would any additional display.
    But I found it undesirable for any thing tha requires lots dragging and clicking.
    Every so often the device would lock up. At witch point the computer would get stuck trying to detect the USB display. I would have to unplug the adapter, cycle the power on the adapter. And then it would be good for a couple more months.
    Also some times after a reboot, the adapter would stop working. I would have to unplug it, and login, and then plug it back in.
    Coping file to my USB 2 harddrive seemed to cause more lag to the USB to Video Adapter.
    About the idea of dasiy chaining 3 Thunderbolt display tgeother. Apple Thunderbolt Display (27-inch): Connection options for Thunderbolt Macs states the most the current MacBook Pro 15 & 17 inch can currently drive is 2 Apple Thunderbolt Displays.

  • I want to use my old iMac G3 as second monitor to my MacBook Pro, how?

    I want to use my old iMac G3 as second monitor to my MacBook Pro, how?
    Thanks!

    You can't really do it in any normal way; that is, using the MacBook's video output port.
    You can use this program
    http://www.screenrecycler.com/home.html
    to make your iMac screen act as a second display, over a network connection. ScreenRecycler runs on your MacBook and creates a virtual second display. It uses the open-source VNC (screen sharing) protocol to serve that second display over the local network. You then run a VNC client program (usually free) on the iMac G3 and display the MacBooks virtual second screen in a window, which you can display full screen. Your iMac then appears to be the MacBook's second screen. You use System Preferences Displays pane to set it up, as you would a real second display.
    How well this works depends on your iMac's speed, what Mac OS version it runs, and the speed of the network connection. If you connect the two directly with an Ethernet cable (Cat-5 or better), the network speed should be decently fast (at 100Base-T). If your iMac G3 has Tiger (10.4), you can use this program as the VNC client
    http://www.jinx.de/JollysFastVNC.html
    (there are free VNC clients for 10.3 and earlier)
    However, this solution will never be as fast (in terms of screen refresh rate) as a real display using a real video connection. But you can try it at no cost, to see if it meets your needs.

  • HT3986 How do I run an external monitor on a macbook pro running windows 7

    How do I run an external monitor on a Macbook Pro running Windows 7

    on my imac connecting a TB to dvi converter to my imac and to my 24" dell monitor was all it took
    windows like osx saw the external monitor and let me clone to it or extend my desktop to it

  • Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

    Hi
    Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?

    I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
    and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful?  If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
    just a shot in the dark
    I'm probably wrong....or not
    John B

  • How do I set-up my TV as a dual monitor for my MacBook Pro?

    Hi
    I have a mid-2009 MacBook Pro running (OS X 10.8.2) Mountain Lion, and recently I rearranged my home workspace so that I can view my TV from my desk while I work.
    I would like to set-up my TV as a dual monitor for my MacBook Pro, so I can stream videos on my TV screen and have the whole screen to do work on my MacBook Pro at the same time.
    Is this possible? I've seen people use TVs as a mirror display (where it works as their main and only monitor), but never as a fully operational dual display.
    As an example, I would like to have my MacBook screen showing a desktop with the whole screen devoted to Photoshop, while I have another desktop running on my TV, which shows an internet browser or other application.
    If this is possible, what cords/hardware would I need, and what are the settings that will enable me to do this?
    - My TV is a modern flatscreen LCD, and it has two HDMI ports in the back.
    - It's about 9-10 feet from my desk.
    If anyone could help, that'd be awesome!
    Thanks.

    Yes, you can do that.
    You'll need a mini displayport to HDMI adaptor:
    http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support
    and an HDMI cable long enough to reach your TV
    (look on Amazon or Monoprice for the best price on any of those parts)
    In your display options, you will just choose extended desktop vs mirrored display.

  • How do I connect a camera to my macbook pro when using the computer with an external monitor in clamshell mode?

    How do I connect a camera to the Macbook Pro when using the computer in clamshell mode with an exrternal monitor?

    same as it ever was
    do it like nothing is different.
    be sure to have an external trackpad keyboard or mouse as you will loose them on the computer once it is closed.

  • I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)?

    I have a MS Office for Mac CD, how do I install the software onto my MacBook Pro (Retina Display)? It does not have a CD drive.

    If all else fails, try this.  i used to do it all the time before. might or might not work with the new office.
    if you have access to another computer with a cd/dvd rom, copy the entire contents of the cd on a thumb drive.
    insert the thumb drive in your MB and do the install from there.
    However, if you have the newer version of MS Office, Bandit's suggestion is much better.

Maybe you are looking for