How to display a message in dashboard when the source is not available

Hi,
I had a requirement to display a custom message in the dashboard instead of showing the default error message like "Client commands are disabled by administrator" when the source is unavailble for the reports. I'm using Essbase as the source and when the cube is loaded, i have to dispaly the custom message and to hide all the reports in the dashboard, any suggestions are highly appreciated and will be highly helpful to me.
Thanks
Ashik

Hi,if i understand your question....
i believe you can manage it in 3 ways.
1.you can make groups in order each one be able to "see" its own report..and so on...
2.In the results section , there is a format other views-->No result, you can try it.
3.There is a configuration in///....\OracleBI\web\msgdb\**your nls**\messages such as commmesages.xml and other , where you can handle your "error" report
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Similar Messages

Invoice message Preseding document for the invoice is not available.

Hi .
when I want make the Invoice process to PO the system show the header Message
Invoice message Preseding document for the invoice is not available.
even the Po recepcion is made into SRM.
any suggestions
thanks .

Hi Oscar
It seems the PO has GR Based Invoice Verification indicator active. IN that case system will look for the confirmations/GRs for this PO in order for you to post an invoice for this PO.
Regards
Virender Singh

How do I relink my video files when the source files are located in an AVCHD folder structure?

I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
Here is a snap shot:

If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
Perhaps soeone else can shed light on this?

How to add songs to a playlist when the songs are NOT on the Purchased list

In Itunes there used to be, in the Playlist page, a "playlist" which appeared at the top called All Music. In the more recent versions of Itunes this is no longer the case and All Music has disappeared and the closest you can get is Purchased. Unfortunately the Purchased list misses out all sorts of things which were genuinely added to Itunes.
In the old days I could select any group of songs from the All Music "playlist" and simply drag them into the appropriate playlist. No problem. Obviously I can still do this if all the songs are on Purchased but, if they are not, what do I do.
I know that it is possible to see all the songs by clicking on Songs at the top of the page and I can then select those that I wish to add to a playlist. But there is no way (that I can see) of dragging these to the required playlist since playlists do not appear in this page format. There is nothing in File or Edit which looks useful. I even tried Copying the selection (in desperation i must admit) with a view to subsequently Pasting to the appropriate playlist but, as I expected, that has a greyed out Paste so no luck there.
There obviously must be a way of adding songs which do not appear in Purchased to a playlist. What am i missing?

Hi scroobyplex, I think i am now fairly happy with the situation as explained in my last post but, as you have taken the trouble to reply, i will try to explain myself a bit better as i don't seem to have been very successful so far.
As I mentioned in my 2nd post, I am well aware of the Categories button at the top left of the screen under File/Edit/View etc. For me this is always set to Music since i don't use any of the other categories.
I am not sure what you mean when you say clicking on Music shows all my music files. In fact, when I click on category Music, I then get various choices appearing along the top of the screen as mentioned in my 1st post - Songs, Artists, Albums, genres, Playlists. If i choose any of the first four I do get a full list of all my tracks but there is no facility there for dragging selected tracks onto a specific playlist.
The other option is Playlists. This gives me a list of all my current playlists,both those created by me and those created automatically by Itunes (of which the previously mentioned Restored Playlist .... playlist is an example) The Playlist screen always opens with one of the playlists already selected
The only option i have then of seeing a different list of tracks is to select a different playlist. If i want to add new tracks to a playlist, often the Purchased list will be OK as a source for dragging but, if i have loaded a CD into Itunes, I would need to select the Restored Playlist... playlist as any new tracks seem to automatically go onto this regardless of the source. There is nothing else which gives me a full list of tracks on a screen which permits dragging onto any specific playlist.
As mentioned in my previous post I have no idea why all my music, both old and new, goes into a playlist called Restored Playlists.... instead of something sensible like Music or All Music but it does what i need so i no longer have a problem

Time Machine - using multiple drives when the first is not available

Hello I have been succussfully using Time Machine with my USB external drive. I have been connecting it to my MacBook Air from time to time. Manual backups as well as the hourly backups when the drive has been connected worked without any problem.
Recently, I connected Synology DiskStation (NAS) to my network and I have added it to the list of drives in my Time Machine setup. When my original external drive (first in the list) is not connected to my MacBook the hourly backup is not initiated by the Time Machine at all. Manually started backup is runnign fine without any problem.
The external drive is annotated with exclamation mark in Time Machines list with "not available" error - and it seems that this is causing the interruption of automatic hourly backup to any drive.
Is there any way how to debug Time Machine? Or to get some logs of Time Machine?
Any similar experience with multiple drive backup when the first of them is disconnected most of the time...?
Thanks a lot for any help
Petr

Perhaps you should address this to Synology's tech support. Apple doesn't provide any support for third-party NAS, so your best bet is with Synology.

How is one supposed to Fix Firefox when the computer does not open the new edition of Firefox that you just downloaded? Am I the ONLY one to ever have had thi

I run win7 64x pro. This is a restatment of problem I posted yesterday I have a hard time believing I'm the first to ever have this problem which is as follows: I used CC Cleaner because of FunMoods, which is the onlt thing I have found that removes that virus thoroughly
Having done that-Face book and a few other sites came up as hyperlinks only with no illustrations, So- I deleted Firefox completely and downloaded a new copy. It downloads but won't open. I used an old copy-13.0 & same thing-does not open.
I have used Firefox for Win since it came out.. My rule of logic with computers is that when I have some problem I cannot solve myself- I CANNOT be the first person to have had that problem yet I see no answers. I would appreciate some help. Thank you.

I am the same one who posted that question though the problem is exactly as described.. I watch the progress bar unpack the download and then it gives me the choice-run with previous settings or as administrator using a password.
Either way-I do not get a new browser. I do get a screen saying that my previous settings may be partially lost. I think a month ago I had also used CC cleaner. At that time-right clicking worked. Now it does not matter. Clicking on the Mozilla download gives me the progress bar but NO unpacked browser.

How to block a payment in F110, when the system does not allow us to block

Hi all
Blocking of a payment happens in the following areas :
1. In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
2. We can also block a vendor through Vendor master area
3. We can block a Vendor from paying through Xk05.
Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor. But the system does not allow me to block it. Why the system does not allow the block. Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
Can anyone help me out in this...
thanks and regards
SL

Dear,
Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
Regards,
Chintan Joshi

How can I purchase even just the one month plan when the survey is NOT available in my country?

The product is not available in my country, and I really need it for a study I'm conducting...
Can you make this available in my country? or just me?
Any ideas where I can post surveys for free?

What country are you in?
This is the list of supported countries:
http://forums.adobe.com/docs/DOC-1375
In order to purchase you need a credit card with a billing address in one of these countries.
Randy

My library says a song has an error. However previous purchases already says downloaded. How do I re-download when the button is not available because the song was already downloaded?

Can anyone help with the above problem please?

Tap Settings > General > Reset > Reset Network Settings
You will have to re enter the Wi-Fi password.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
3G may be too slow to download music from iTunes.

I can no longer use the driver for my PSC 1600 Series as of two days ago. The message tells me that the software is not available to update! Has anyone else encountered this. I have OS 10.73 and a MacBookPro

As of two days ago, the ability to print from my MacBookPro to the PSC 1600 Series vanished, indicating they do not have new software ready. I have tried HP and Apple but have not received any help. Can anyone help me to find whatever software that was either lost or not updated. My iMac did have an HP update.

Latest drivers for HP:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

When I try to share my recently completed movie to Media Browser, the following message keeps popping up: "The project could not be prepared for publishing because an error occurred. (-50)". How do I fix it?

When I completed my iMovie (after hours of work), I can't move it to iDVD or the Media Browser. The following message always pos up: "The project could not be prepared for publishing because an error occurred. (-50)". What is this and how can I fix this? Please help ... I need to get the completed DVD in the mail now!! Thanks.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display a message in dashboard when the source is not available

Similar Messages

Maybe you are looking for