How to display a table name in the report

Hi,
I have a requirment about the display of pivot table. When we drag a column to see its result, we always see his column name, now what I want to show are both table name and column name..
like:
District_D
Region District
China Beijing
India Chennai
Regards,
Anne
Edited by: anne on Oct 25, 2011 2:39 AM

Hi Anne,
If you want to implement Dpka's solution (hardcoding table and column values in column heading and add line break in between), you will need to add the below entry in instanceconfig.xml file. Refer http://gerardnico.com/wiki/dat/obiee/hardenxss
<HardenXSS>false</HardenXSS>
This will enable the HTML elements to be treated as HTML and not plain text. After adding the above entry in the xml, restart your presentation services and test your solution.
Thanks

Similar Messages

  • How to display a table control in a report

    hi
    how to display a table control in a report

    create a screen in your report.
    Call that screen in your report.
    While designing your screen, use Table control creation wizard to create table control on that screen.
    http://www.planetsap.com/online_pgm_main_page.htm

  • How to display dynamic header title in the report?

    I have a req to display dynamic header title in the report.
    When a id is entered in the prompt text, it will display the user data based on that user_id.
    so similarly....the header title should vary each time when you select different user_id.
    How can we implement this?

    >
    Zack H wrote:
    > Lazaro,
    >
    > It depends on what you want displayed in the heading for each id.
    > Please elaborate.
    >
    > Thanks,
    > Zack H.
    Zack..I have several projects listed under several project id's...
    so when a user selects project id 00164 then it should display something like "Project document for Jon Doe"
    again when the user selects project id as 00192 then it should display something like "project document for Zimmerman"
    Did you get it??

  • How to use a table name in the select statement using a variable?

    Hi Everybody,
                       I got a internal table which has a field or a variable that gets me some tables names. Now I need to retrieve the data from all these tables in that field dynamically at runtime. So could you suggest me a way out to use the select query which uses this variable as a table ?
    Regards,
    Mallik.

    Hi all,
    Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
    for ex : select * from (tab_name) where....?
    Can we do inner join on such select statements? If so how?
    Thanks & Regards,
    Mallik.

  • How to find out table name for the field in the webUI

    Hi.
    I am in CRM2007.
    So i go to the transaction code    BSP_WD_CMPWB
    In that i provide the component name as CRM_UI_FRAME.
    I press the Test button.
    So, it opend the WebUI.
    I want how to find out table of the particular input field?
    I mean from which table the data is retrived how to find out?
    When i enter some thing in the input field how to find out in which table that data is stored?
    By pressing F2 on the input field it opend View and Component Name.
    I want find out table of that particular field. How to find it?
    If anybody know about this explain it with Screen shorts if possible.
    Thank You.
    Krishna. B.

    hi
    goto tx genil_model_browser. Suppose you want to find fields reated to your order header eg sold to name. In component set write all and press F8. Then goto access object and in access object click on node BTAdminH. Click on attribute structure. Here you will find structure and attributes. If you click relationship then you will see all the relationship wrt btadminh. open any r/s that you require. and click on other object and attribute. You will get to know the structure.
    Best regards
    Pankaj kumar

  • How to display header fields names in the next page in report6i

    how to display repeat header field names into the next page in report6i urgent plz......
    When i am runing report in 1st page only the header information is displaying in 2 page the header info is not displaying only records are displaying.So i want to display the header info in 2nd page also.
    Plz help out.

    Hello,
    Go to the report layout model and select those items/objects which are not getting display on next page and open the property pallet by pressing F4 key and set the property Print Object On to All Pages then it will display on all pages.
    -Ammad

  • How to display a table without selecting the first row as default ?

    Hello All,
      Can someone advise on how I am able to display a table but with no row selected on initial display ? Currently, the table is being displayed with the first entry selected by default (The orange box is selected). Thank you very much.
    from
    Kwok Wei

    Javadoc for IWDNode says:
    public void clearSelection()
        Clears the Node's multiple selection; does not change the lead selection.
    public void setLeadSelection(int index)
        Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
        Parameters:
            index - the index of the element
        Throws:
            ContextException - if caller tries to reset the selection, but selection is mandatory
            IndexOutOfBoundsException - if the given index is not within the element list
        See Also:
            getLeadSelection()
    Armin

  • How to Display Mutiple CostCentre Hierarchies in the Report

    Hi Team,
    As we have multiple Hierarchy groups defined in R/3 for Cost Centres, I would like reflect he CC values in the CC report where it is showing the default Hierarchy (only) whereas others are appearing in NotAssigned, is there a way to handle the system to display all Hierarchies  listed in the 'Restrictions' more than one Hierarchy.
    your expert adivse is highly appreciated.
    Thanks in Advance, BR.

    Gentlemen any luck..!

  • How to display selected table fields in ALV report.

    Hi,
    I am displaying data from table EKPO using ALV through this query.
    select * from ekpo into table itab_ekpo up to 25 rows.
    bt if i need to display selected fields like
    select ebeln matnr netpr from ekpo into table itab_ekpo up to 25 rows.
    IT gives  error GETWA_NOT_ASSIGNED.
    FIELD SYMBOL HAS NOT YET BEEN ASSIGNED
    CAN ANYONE PLZ HELP ME.

    Hi ,
          I am pasting the code in which i am getting the error.Plz help.
    REPORT  ZHALV.
    tables:ekpo.
    data itab_ekpo type ekpo occurs 100 with header line.
    types: begin of itab_new,
           f_ebeln type ekpo-ebeln,
           f_matnr type ekpo-matnr,
           f_netpr type ekpo-netpr,
           end of itab_new.
    data itab1 TYPE STANDARD TABLE OF itab_new initial size 0.
    type-pools: slis.
    DATA: lt_fieldcat TYPE slis_t_fieldcat_alv,
          lf_fieldcat TYPE slis_fieldcat_alv.
    DATA:    ws_repid TYPE sy-repid VALUE 'ZHALV'.
    DATA:  l_layout   TYPE slis_layout_alv.
    selection-screen Begin of block block1 with frame title text-111.
    select-options : S_EBELN for EKPO-EBELN.
    selection-screen end of block block1.
    INITIALIZATION.
    start-of-selection.
      select ebeln matnr netpr from ekpo into table itab1 up to 10 rows WHERE EBELN IN S_EBELN.
    *select * from ekpo into table itab_ekpo up to 25 rows.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM GET_DETAILS.
    end-of-selection.
    *&      Form  build_fieldcatalog
          text
    FORM build_fieldcatalog .
    PURCHASING DOCUMENT NUMBER
      CLEAR lf_fieldcat.
      lf_fieldcat-fieldname = 'EBELN'.
      lf_fieldcat-ref_tabname = 'EKKO'.
      lf_fieldcat-ref_fieldname = 'EBELN'.
    MATERIAL NUMBER
      CLEAR lf_fieldcat.
      lf_fieldcat-fieldname = 'MATNR'.
      lf_fieldcat-ref_tabname = 'EKPO'.
      lf_fieldcat-ref_fieldname = 'MATNR'.
      APPEND lf_fieldcat TO lt_fieldcat.
    NET PRICE IN PURCHASING DOCUMENT
      CLEAR lf_fieldcat.
      lf_fieldcat-fieldname = 'NETPR'.
      lf_fieldcat-ref_tabname = 'EKPO'.
      lf_fieldcat-ref_fieldname = 'NETPR'.
      lf_fieldcat-cfieldname = 'WAERS'.
      lf_fieldcat-do_sum = 'X'.
      APPEND lf_fieldcat TO lt_fieldcat.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  GET_DETAILS
          text
    FORM GET_DETAILS.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
                                 I_INTERFACE_CHECK                 = ' '
                                 I_BYPASSING_BUFFER                = ' '
                                 I_BUFFER_ACTIVE                   = ' '
         I_CALLBACK_PROGRAM                = ws_repid
                                 I_CALLBACK_PF_STATUS_SET          = ' '
                                 I_CALLBACK_USER_COMMAND           = ' '
                                 I_CALLBACK_TOP_OF_PAGE            = ' '
                                 I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
                                 I_CALLBACK_HTML_END_OF_LIST       = ' '
         I_STRUCTURE_NAME                  = 'EKPO'
                                 I_BACKGROUND_ID                   = ' '
                                 I_GRID_TITLE                      =
                                 I_GRID_SETTINGS                   =
                                 IS_LAYOUT                         =
                                  IT_FIELDCAT                       = lt_fieldcat
                                 IT_EXCLUDING                      =
                                 IT_SPECIAL_GROUPS                 =
                                 IT_SORT                           =
                                 IT_FILTER                         =
                                 IS_SEL_HIDE                       =
        I_DEFAULT                         = 'X'
        I_SAVE                            = 'A'
                                 IS_VARIANT                        =
                                 IT_EVENTS                         =
                                 IT_EVENT_EXIT                     =
                                 IS_PRINT                          =
                                 IS_REPREP_ID                      =
                                 I_SCREEN_START_COLUMN             = 0
                                 I_SCREEN_START_LINE               = 0
                                 I_SCREEN_END_COLUMN               = 0
                                 I_SCREEN_END_LINE                 = 0
                                 I_HTML_HEIGHT_TOP                 = 0
                                 I_HTML_HEIGHT_END                 = 0
                                 IT_ALV_GRAPHICS                   =
                                 IT_HYPERLINK                      =
                                 IT_ADD_FIELDCAT                   =
                                 IT_EXCEPT_QINFO                   =
                                 IR_SALV_FULLSCREEN_ADAPTER        =
                               IMPORTING
                                 E_EXIT_CAUSED_BY_CALLER           =
                                 ES_EXIT_CAUSED_BY_USER            =
        TABLES
          T_OUTTAB                          = itab1
          EXCEPTIONS
                                 PROGRAM_ERROR                     = 1
                                OTHERS                            = 2.
      IF SY-SUBRC <> 0.
        WRITE: 'SY-SUBRC: ', SY-SUBRC .
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    *append itab_ekpo to i_tab.
    ENDFORM.                    "GET_DETAILS

  • How to display only Negative values in the report.....

    Hi,
    I want to display only negative values for one particular column.
    Any suggestions ?
    Thanks,
    Jeetu

    Hi,
    define a condition for all characteristics and for specially the keyfigure. Set it to < 0. That should do the trick.
    regards
    Siggi

  • How to display all tables residing in my database

    i'm using 10g express edition.
    i'm developing a .net application using oracle
    i want display table infomation in a datagrid
    for that i need to select tables fromthe database using the interface given by them
    in that i found server name field.....what it actually means?
    also how to create a new database in 10g and how to display all tables residing in the database?
    pls help me
    thanking u
    chaitanya

    user11359516 wrote:
    i want display table infomation in a datagrid
    select owner||'.'||table_name owner_table_name
      from all_tables   
    user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
    select owner||'.'||table_name||'.'||column_name table_column_name,
           decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                            'VARCHAR2',data_type||'('||to_char(data_length)||')',
                            'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                      null,data_type,
                                                      data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                            data_type) type,
                            nullable
      from all_tab_cols
    order by table_name, column_id

  • How to display table name in the Record history

    Hi,
    I have developed a new custom form. When I click on the record history, it displays details like updated_by , update_Date.
    But it doesnt show the table name ( of the data block ). Is there any coding to be done to display the table name ?
    Regards,
    Suresh

    Sounds like some custom form for the eBusines-suite. Maybe you get an answer in an eBusiness-suite related forum, maybe here OA Framework

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

  • How can one find the table name of the Delta Que and setup table?

    Hi !
    Is there any method to find the table name of the delta que and Extraction que ?

    setup table = <extract structure>_setup
    example: setup table for MC11VA0ITM = MC11VA0ITM_SETUP
    Delta Queue is based on following 3 tables:
    ARFCSDATA
    ARFCSSTATE
    TRFCQOUT
    assign points if useful ***
    Thanks,
    Raj

  • How to include in table of contents the list of figures and list of tables?

    How to include in table of content the "Table of contents", "List of figures" and "List of tables"? All are generated with function Table of contents, but they will not appear in generated table of contents even if they have proper style of headings - Heading 1, as other chapter.
    I get this in generated Table of contentes of my dissertaion thesis:
    Table of contents
    Preface
    Table of contents <- missing
    List of tables <- missing
    List of figures <- missing
    Introduction
    Main
    Conclusion
    Is it ok, that generated lists are not included in table of contents?

    You've just confused me.
    My understanding of how this is set up is that either:
    This is a book, and there is a master TOC that includes all book documents and a document-specific TOC in each component file, or
    This is a single file and there is one master TOC that includes all sections and a section-specific TOC that includes only the individual section.
    In the first case, I think you would want two TOC styles set up, one that includes the chapter heads (if I understood how you said this worked) for the for the master, and you would include all docs in the book when you generate it, and a second style for the individual chapters, with the subheadings you want to include.
    In the second case, it would be similar, but instead of only one style to cover the section TOCS, I think you would need to create a unique set of pargraph styles for the headings in each section (they can all be the same format, based one section, just with unique names), and then make a TOC style for each section that includes only the styles from that section.
    OK,  wait a sec. I just reread what you said: "Another thing: when the numbers are "linked" and updating well, they  display indide a little box. Not a text box, but a kind of little frame  around the numbers. That frame makes it imposible to delete just one  number: when the TOC says that Section 6.1 is in page 135, for example,  you cannot delete just the 5, it deletes, not just the 3 numbers, but  also the doted tab."
    I think these are NOT normal TOCs created by using Layout > TOC (but you could replace them with ones that are, if you set up your styles properly and the text you want to include is appearing on the pages). Those little boxes you mention sound like cross-references, which should update automatically without any intervention at all. Unfortunately, cross-refs can be flakey, especially if they point to another document. I'd open the cross-refs panel and see if you need to recreate a bunch of links.

Maybe you are looking for

  • Sound Icon Greyed Out - Midi AutoAggDevice auto-created

    Whenever I restart my computer or log out/back in, the sound icon in the menu bar is greyed out. When I check the sound preferences in system preferences, it says that the output is: "AutoAggDevice". I gain back control after selecting "Internal Spea

  • How to choose in Delete Duplicates from internal table?

    Now I need to delete Duplicates from internal table, So at first I sort than I delete duplicate Sort itab1 BY Company_Code  Asset_No Capital_Date.       DELETE ADJACENT DUPLICATES FROM itab1 COMPARING Company_Code  Asset_No  Capital_Date Company_Code

  • MAC HANGS WHEN I WRITE DVD VIDEO USING TOAST OR IDVD

    DEAR SIR, I HAVE A PROBLEM WITH MY SONY DVD .. EVERY TIME I TRY TO WRITE DVD VIDEO MY MAC HANGS WHEN TOAST ROXIO 10 STARTS TO LEAD OUT AFTER ENCODING THE VIDEO .. AND IT HANGS ALSO WITH IDVD AFTER ENCODING THE VIDEO .. AND I MUST RESTART MY MAC ...PL

  • How to protect JSP source code on the Server Side ?

    I am new on JSP. I Already know about various Web and Desktop technologies but is the first time on JSP. I know ASP for example. Well, about .NET platform, it protects my source code on the server, the source code is compiled and on the server, only

  • "Files Mismatch" message when logging

    I'm in the process of logging my footage. All my clips are currently off line and when I try to reconnect them to the media (AIC.mov files in my capture scratch folder), I get the "files Mismatch" message. I tried to ignore it and continue but it mes