How to display all the characteristics in a MultiProvider in a single Row?

Hi
I have a requirement as follows :
The MP has data from 2 cubes C1 and C2 as follows:
         Char1 Char2 Char3 Char4 KYF1 KYF2 KYF3
C1       1        2        3        #       10      20      #
C2       1        2       #         4       #       50      60
means blank ie. the char is not present in a constituent Cube.
My Report rquirement is :
Char1 Char2 Char3 Char4 KYF1 KYF2 KYF3
1        2        3        4       10       70      60
Kindly suggest how to achieve this in Query Designer7.0?
Thanks,
Aparna.

Hi,
Multicube is based on Join and therefore all the charateristics which are part of the report like rows of the report or in the drill down of the report..... should be part of the both the cubes.
Either you can have same char and key figures from both the cubes in the report or char from both the cube and key from any cubes.Then only the values will come in single records.
Its not possible to combine the char from one cube and key figure from others in case of multicube and will give you result in two different rows.
You should go for infoset for those cases.
Thanks
Ajeet

Similar Messages

How to display all the questions of a survey in a page?

How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sindu

Hi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to get all the characteristics of a variant material?

Hi gusy,
Do anybody can tell me how to find out all the characteristics of a variant material?
I've checked following tables: MARA, CABN, CAWN, KSML, KLAH, AUSP.
Thanks & Regards,
Tim

Hi,
You can use the following BAPI's;
BAPI_OBJCL_GETDETAIL to get the characteristcis of Material
BAPI_OBJCL_CHANGE to change the characteristics.
You can also use the CAWN, CAWNT,AUSP tables to find these characteristics.
Also:
Try this....
WSTN3_GET_CHAR_PROFILE
Reward if useful,
Cheers,
Chandra Sekhar.

How to display All the rows in a Table

Hi All,
Our requirement is, we need to display all the records of an VO in a table. We should not have navigation bar with previous and next. Runtime only will come to know how many records the VO has. Is it possible to achieve our requirement using setNumberOfRowsDisplayed() method in OATableBean ?

Do u want to do it declaratively or programmatically.
Declaratively You can set no of rows property of table bean. If u want to set it programmatically then u can do it as discussed in the thread..
Regards,
Ram

How to display all the rows in a report

How will it be possible to show all the rows in a report, in a table view , other than modifying the table properties for each report individually ?
Is there some setting, so that for all tabular reports, all the rows will be displayed in one page?
I have added the following to the instanceconfig.
<Table>
<ResultRowLimit>1000000</ResultRowLimit>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>64000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>64000</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>2000</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
</Table>
Still I can view only 25 rows for the report.
Thank you.

Hi,
Open your report--> Select Table view--> Edit view properties-->Row per page --> Give here 9999999.
It will show all the rows in the report.
Hope this help's
Thanks,
Satya

How to display all the files name in same folder inside a JTable?

Currently i am doing an LAN P2P application (similar to KazAa) which is have a function to search files and list out files name after searched found. I am planning to list all the searched file names in JTable. I am having problem to list the files name on a table field. Can anybodu help : ) ? Please

I don't understand what your problem is so I'll just refer you to the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/table.html]How to Use Tables.

How to display all the Records of all the "Books of Business" in Report ?

Hello,
I have a user with 3 "Books of Business" (No Sub Books).
I would like to generate a report with the data of the 3 books.
With the "selector", it seems that I can't choose the "All" option.
Can someone confirm the behavior ?
Thanks for your help.

Hello,
I do have a similar problem.
I have already tried to create a parent book (the checkbox "can contain data" is not activated), assign it to sub-books and add first my user as a book user (Admin role). However, when I start a simple report which should show e.g. Number of Contacts in a book an choose the parent book in the book selector I get an error message and there are no results ("The specified criteria didn't result in any data").
Did I miss any setup steps or is not possible to see all the records at once which belong to the sub-books with a parent book?
If I pick my user book, I see only the records I own. The problem is that our CEO needs a view there he could see records in sub-books separately but also the records in both of them at once. Unfortunately, the Manager Visibility can not be applied because we have a different hierarchy in the system as it is in real (otherwise wrong data in forecasts).
Many thanks in advance
Regards, Vilma

SSRS - How to display all the results from a query and then be able to filter the data

Let's say I have a simple query that will return products name, ID, price
SELECT pname,
pID,
price
FROM products
When I display the results in SSRS the user will (without entering any parameters) see something like:
Product Name | ID | Price
xyz 1 $10.00
.zzz 10 $4,000.00
How can I filter my results once they are displayed? For instance, Out of the results the user wants to see only the products where price is between $10 and $3000?
-Alan

Hi Visahk,
Maybe I did not explain my issue very good.
I want the user to first see all results (without entering the price range) - then if he wants she/he can filter the results by price.
As soon as I add
WHERE price BETWEEN @StartPrice AND @EndPrice
to my SQL query, the user is prompted to enter a price range before seeing any data.
-Alan
Ok for that what you can do is to set allow null value property for the parameters.
Then set NULL as default value for parameters in parameter properties tab
and make the query as below
WHERE price BETWEEN @StartPrice AND @EndPrice
OR (@StartPrice IS NULL AND @EndPrice IS NULL)
and then report will get executed without waiting for any prompt and user may change values at a later stage and rerun it
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to display all the columns in the printpreview

hi experts,
I have developed an alv report using grid display.
there are nearly 10 fields in the output with varrious of length.
They get displayed correctly in grid format.
But, when on the output screen, I click on List menu and goto "Print Preview",
the output gets displayed in a list format where these only 9 fields get displayed one filed in a truncated format.
I have tried all options such as optimize colwidth and giving outputlen for the fieldcatalog.
But, still the problem persists, only for printing and print preview.
Please suggest a solution.
Mohana

Hi,
You can develop your own print preview by creatind the pf-status and call it.
I am sending you the sample code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
   I_CALLBACK_USER_COMMAND           = 'PRINTPREVIEW'
   IS_LAYOUT                         = ln_layoutinfo
   IT_FIELDCAT                       = i_fieldcat1
TABLES
    t_outtab                          = I_VBAK.
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZPRINT'.
ENDFORM.
FORM printpreiew using r_ucom type sy-ucomm r_selfield type slis_selfield.
case R_ucom.
    WHEN 'PRINT'.
    LEAVE TO LIST-PROCESSING.
    format intensified color = i.
    WRITE: /50(64) 'SALES INFORMATION'.
    WRITE: / 'CUSTOMER RANGE FROM', CUST-LOW, 'TO    ', 40(74) CUST-HIGH.
    ULINE (114).
    write: / sy-vline, 'customer', 11 sy-vline, 'doc no', 21 sy-vline, 'date', 35 sy-vline, 'time' , 45 sy-vline, 'created by', 60 sy-vline,
             'item', 70 sy-vline, 'mat num', 80 sy-vline, 'MAT GROUP', 90 sy-vline, 'amount', 114 sy-vline.
    ULINE (114).
    i = 3.
    LOOP AT I_VBAK INTO W_VBAK.
      sum = sum + w_vbak-netwr.
      on change of w_vbak-kunnr.
        if sy-tabix <> 1.
          FORMAT INTENSIFIED COLOR = 3.
          uline (114).
          write: / SY-VLINE, 90 'subtotal', sub_total, 114 SY-VLINE.
          uline (114).
          sub_total = 0.
        endif.
      endon.
      sub_total = sub_total + w_vbak-netwr.
      IF FLAG = 'X'.
      FORMAT INTENSIFIED COLOR = 0.
      FLAG = ' '.
      ELSEIF FLAG = ' '.
      FORMAT INTENSIFIED COLOR = 2.
      FLAG = 'X'.
      ENDIF.
      WRITE: / sy-vline, W_VBAK-kunnr, 11 SY-VLINE, W_VBAK-vbeln, 21 SY-VLINE, W_VBAK-erdat, 35 SY-VLINE, W_VBAK-erzet, 45 SY-VLINE,
               W_VBAK-ernam, 60 SY-VLINE, W_VBAK-POSNR, 70 SY-VLINE, W_VBAK-MATNR, 80 SY-VLINE, W_VBAK-MATKL, 90 SY-VLINE, W_VBAK-netwr, 114 sy-vline.
      at last.
        FORMAT INTENSIFIED COLOR = 3.
        uline (114).
        write: / SY-VLINE, 90 'subtotal', sub_total, 114 SY-VLINE.
        uline (114).
        write: / SY-VLINE, 93 'total', sum, 114 SY-VLINE.
      endat.
    ENDLOOP.
    ULINE (114).
endcase.
I think it is useful for you.
Reward points if useful.
Thanks & regards
Deepika.

How to display all the rows in a JTable ???

Hi,
i want to display blank lines in a JTable if there is not enough rows to fill in it. For the moment, there is nothing in the JTable if i have nothing in my tables. Where am i wrong ??
Thanks !!

hi,
use a contructor for jtable with the parameter rowcount or
define a tablemodel class extends from abstract tablemodel mit the method int getRowCount()
{ return xxx;}
table.setModel(mymodel);

ACS ,how to display all the user status?

i want to find out which one of them did not use the account at all,what should i do ?

You could do worse than try extraxi aaa-reports!
www.extraxi.com/requesttrial.htm
This has reports for inactive accounts.
Darran

How to display all the files that are selected using JFile chooser

please hepl me i m posting my code here.
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
import java.io.FileInputStream;
import java.io.FileNotFoundException;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.Deflater;
import java.util.zip.ZipEntry;
import java.util.zip.ZipOutputStream;
public class browser extends JFrame
String curDir;
JLabel statusbar;
public browser()
super("File Chooser Test Frame");
setSize(1050,600);
setDefaultCloseOperation(EXIT_ON_CLOSE);
curDir = System.getProperty("user.dir") + File.separator;
statusbar = new JLabel("Output of your button choice goes here!");
Container c = getContentPane();
c.setLayout( null );
JButton openButton = new JButton("Browse file");
JButton dirButton = new JButton("Pick Dir");
JButton resetButton = new JButton("Reset");
JButton submitButton = new JButton("Submit");
final JTextArea tf = new JTextArea(100,50);
final JList l1 = new JList("list");
tf.setEditable(true);
// add the open FILE chooser
openButton.addActionListener(new ActionListener()
     public void actionPerformed(ActionEvent ae)
     JFileChooser chooser = new JFileChooser(curDir);
     chooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
     chooser.setMultiSelectionEnabled(true);
//Java 1.6 can use FileNameExtensionFilter class
// FileFilter filter=new FileNameExtensionFilter("HTML file","htm","html")
// chooser.addChoosableFileFilter(filter);
//Prior versions must use external extension of FileFilter class (ie ExtFilter)
//ExtFilter requires separate compile to enable choosable selection
     String[] html = new String[] {"htm","html","xhtml"};
     int option = chooser.showOpenDialog(browser.this);
     if (option == JFileChooser.APPROVE_OPTION)
     File[] sf = chooser.getSelectedFiles();
     String filelist = "nothing";
     try
     if (sf.length > 0) filelist = sf[0].getCanonicalPath();
     for (int i = 1; i < sf.length; i++)
     {filelist += ", " + sf[i].getCanonicalPath();
tf.setText("our choices" + filelist);
     catch (IOException evt) {System.out.println("Exception: "+evt);}
statusbar.setText("Your choices: " + filelist );
// String[] text = new String[100];
//getChars(0,100,text[],0);
l1.setText("your choices \n" + filelist);
     else {statusbar.setText("You cancelled!");}
// add the open DIRECTORY chooser
dirButton.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent ae)
JFileChooser chooser = new JFileChooser(curDir);
chooser.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
     chooser.setMultiSelectionEnabled(false);
int option = chooser.showOpenDialog(browser.this);
if (option == JFileChooser.APPROVE_OPTION)
File[] sf = chooser.getSelectedFiles();
String filelist = "nothing";
try
if (sf.length > 0) filelist = sf[0].getCanonicalPath();
for (int i = 1; i < sf.length; i++)
          {filelist += ", " + sf[i].getCanonicalPath();}
     catch (IOException evt) {System.out.println("Exception: "+evt);}
statusbar.setText("You chose " + filelist);
     else {statusbar.setText("You cancelled!");}
System.out.println("Example of ZIP file creation.");
// Specify files to be zipped
String[] filesToZip = new String[1];
filesToZip[0] = "filelist";
byte[] buffer = new byte[18024];
// Specify zip file name
String zipFileName = "example.zip";
try {
ZipOutputStream out =
new ZipOutputStream(new FileOutputStream(zipFileName));
// Set the compression ratio
out.setLevel(Deflater.DEFAULT_COMPRESSION);
// iterate through the array of files, adding each to the zip file
for (int i = 0; i < filesToZip.length; i++) {
System.out.println(i);
// Associate a file input stream for the current file
FileInputStream in = new FileInputStream(filesToZip);
// Add ZIP entry to output stream.
out.putNextEntry(new ZipEntry(filesToZip[i]));
// Transfer bytes from the current file to the ZIP file
//out.write(buffer, 0, in.read(buffer));
int len;
while ((len = in.read(buffer)) > 0)
out.write(buffer, 0, len);
// Close the current entry
out.closeEntry();
// Close the current file input stream
in.close();
// Close the ZipOutPutStream
out.close();
catch (IllegalArgumentException iae) {
iae.printStackTrace();
catch (FileNotFoundException fnfe) {
fnfe.printStackTrace();
catch (IOException ioe)
ioe.printStackTrace();
c.add(openButton);
c.add(dirButton);
c.add(statusbar);
c.add(resetButton);
c.add(submitButton);
//c.add(tf);
c.add(l1);
Insets insets = c.getInsets();
Dimension size = openButton.getPreferredSize();
openButton.setBounds(745 + insets.left,115 + insets.top, size.width, size.height);
size = dirButton.getPreferredSize();
dirButton.setBounds(755 + insets.left,165 + insets.top, size.width, size.height);
size = statusbar.getPreferredSize();
statusbar.setBounds(755 + insets.left,215 + insets.top, size.width, size.height);
size = resetButton.getPreferredSize();
resetButton.setBounds(755 + insets.left,265 + insets.top, size.width, size.height);
size = submitButton.getPreferredSize();
submitButton.setBounds(755 + insets.left,465 + insets.top, size.width, size.height);
size = tf.getPreferredSize();
tf.setBounds(25 + insets.left,5 + insets.top, size.width + 150, size.height + 430);
size = l1.getPreferredSize();
l1.setBounds(25 + insets.left,5 + insets.top, size.width + 150, size.height + 430);
setSize(1000,800);
setVisible(true);
public static void main(String[] args)
new browser();

Start by defining "display". Then continue by reading this:
http://forum.java.sun.com/help.jspa?sec=formatting

How to display a 1 to many query result in a single row?

Hi,
I want to display a 1 to many relationship in a query in just one row. The current result is that I get more than 1 rows. How can I display it in one column with the additional attribute in a column, without repeating? Thank you.
Select s.student, t.teacher from student_table s, teacher_table t where s.id = t.student_id
Result
Student Teacher
John Doe Larry Woe
John Doe Mary Moe
I would rather get a result like this:
Result
Student Teacher 1 Teacher 2
John Doe Larry Woe Mary Woe
Edited by: Samantha on May 18, 2011 2:48 PM

Hi,
Will all Students have exactly two Teachers?
If not picture your sample with two more Students.
One having 1 Teacher
One having N Teachers
Think about N, what will it be? - How would you create a table with N columns?
If you can't easily answer above, re-consider what you are trying.
That said, it could still be done - even if all Students do not have exactly two Teachers - and is called Pivot a dynamic number of columns.
Examples are in FAQ
SQL and PL/SQL FAQ
Still a bad idea, with or without known number of teachers
Regards
Peter

How to display all the characteristics in a MultiProvider in a single Row?

Similar Messages

Maybe you are looking for