How to display an error Message in Web Dynpro

Hello,
I want to display an error message in Web Dynpro. I'm using this,
IWDMessageManager message = wdComponentAPI.getMessageManager();
message.reportSuccess("<some relevant debug message>");
However, the message is always shown at the bottom of the screen. It is possible to select the location in the screen for showing this object? Or what is the best way for doing this? I've tried to use a Label but I can't set the type (warning, error, info) it's only a message.
Thanks
Regards
SU

Hi,
If you include the UI, it will display at the top of the screen..
Please see below how to create a message in the message editor.
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
and this is how you access the error message in the application ti display it to the end user
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Ganesh N

Similar Messages

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to display an error message after validation in Formatted Search?

Hi SBO experts,
if an error is detected on validation in a Formatted Search, how to display an error message to the user entering the data?
Thanks & Regards,
Raghu Iyer

i created a formatted search query & attached it to the field 'Quantity' at Line Item level in Sales Order screen. just for testing purpose, i eneterd the following code lines in the query validating 'Quantity'
if $[$38.11.0] > 50
begin
select @error = 1
select @error_message = 'Vendor code cannot begin to X sign.'
end
the system throws the error : Internal error (8180) occurred [Message 131-183]
actually, i need to display an error message to the user if Quantity is not in multiples of the OITM.SalFactor2
if $[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0]) > 0
begin
select @error = 1
select @error_message = 'Error in Quantity.'
end
but, this expression to get the remainder itself seems to have some error
$[$38.11.0] % (SELECT T0.[SalFactor2] FROM OITM T0 WHERE T0.[ItemCode] = $[$38.1.0])
i guess, % operator is used for modulo (to find the remainder of one number divided by another.) ? am i right ?
Regards,
Raghu Iyer

How to display an error message on screen?

Hi experts,
In screen painter, how to display an error message in the message area just below the screen?
Thanks!

hi wuyia,.
Write like this;
Message 'Process completed Successfuly' TYPE 'S'.
Message 'Want to Overwrite Value' TYPE 'W'.
Message 'Press enter to continue' TYPE 'I'.
Message 'Invalid Input' TYPE 'E'.
S - Success
W - Warning
I - Information
E - Error
You can adjust your GUI option to display the message in a Popup or in the status bar.
Regards
Karthik D

How to display a user message on WEBI Home page ?

Hi all,
How to display a user message on WEBI Home page ?
like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

Unfortunately this is not possible to do "out of the box". There aren't any pre-configured options that will let you do this. You're only real option is to try and modify the infoview source code yourself to do this.
Regards,
Shawn

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

ADF-BC/JSF How to display acustom error message from a backing bean

Hi all
Can anybody provide an example of how to manipulate the list of error messages from a JSF backing bean.
In my code I use a different navigation case and this directs the user to the page displaying the error message but I am sure that there must be a more elegant way.
Thanks in advance
Thanassis

Thanks Kris
I think you 've put me on the right track here, it's just that in my case what I really want to do is prevent my users from editing records not belonging to their own group. This is done via a selectOne table component and then the backing bean code tests if the value #{row.UserGroup} matches the #{bindings.LoggedOnUserGroup.inputValue}. If the values are equal then the beans returns the navigation case to the edit page. Otherwise it returns the navigation case for the "cannot edit" page.
So what I am thinking is to return null and somehow raise the right kind of exception in order to display the error in the af:messages tag.
Thanassis

How to display an error message in maintenace view

Hi,
I have following requirement.
I have a table. In the table, there is a field named REPORT which keeps an executable report name. When adding an entry i need to fill the field with an report name, which should exist in the system. The report name should not be include objects.
Then I use search help HELP_TRDIR with import parameter SUBC = 1. I also create a maintenance view for the table.
Then my question is how to display a warning message if the report I input in REPORT field doesn't exist in the system. If I need to modify the generated objects of the maintenance view, how to do it.
The reason i don't use foreign key is that it seems filter functionality is not availabe in the case with import parameter SUBC = 1.
Thanks in advance,
Best Regards, Johnney.

Hi,
You need to add your validation in the table maintenance events:
Use the event : 01 - Before saving data to the databse table... for this purpose
1) Go to Menu-> Utilities->Table mainatenace generator
2) On the table maintenance screen->Menu->Enviroement-> Modifications->Events
3) select an event 01 and give some subroutine/form name.
4) Add your validation in the form(Note this form should be in the Func Group of the table maintanance genetaor)
Regarrds
Shiva

How to display smartform as PDF in web dynpro java

Hi,
Where can I find sample program to display smartform as PDF in web dynpro java.
Thanks.
Regards,
Henry

1. Create a smart form in the R/3 side
2. Now create a function module with the corresponding export parameter:
3. Make sure that the function module is marked remote enabled.
4. In NWDS create an Adaptive RFC model which points to the FM created in R/3 under the webdynpro application
5. Now create an application and view inside it to display the PDF and Insert a frame inside the view
6. Create a value node and an attribute say url of type string inside that node and bind it to the source
7. In the doInit() method place the following code
>    ZTest_Pdf_1_Input input = new ZTest_Pdf_Input();
>    wdContext.nodeZTest_Pdf_Input().bind(input);
>    try {
>            wdContext.currentZTest_Pdf_InputElement().modelObject().execute();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
> wdContext.currentInternalElement().setUrl(convert(wdContext.currentOutputElement().getBin_File()));
Inside that view create a method to convert the string to url so that it can be passed as a string to the setUrl method of the currentContextElement() , say convet(byte[] doc_content) which return a string.
Inside that methos write the following code,
>         String url = "";
>           WDWebResourceType webResType = WDWebResourceType.PDF;
>            IWDWebResource webResource = WDWebResource.getWebResource(doc_content, webResType);
>            try {
>                        url = webResource.getURL();
>            }
> catch (Exception e) {
>                        e.printStackTrace();
>            }
>            return url;
Hope It will be helpful
Regards,
Sam Charles J.

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

How to display long error message in ME21N

Hi,
How to display a long error text (in multiple lines) in ME21N / ME22N message popup we get while saving or checking the PO. My error message length is 100 chars. It is displaying only 40 chars in a single line. My requirement is to display that in multiple lines of message popup. Please let me know asap.
Thnks in Advance.

Hi,
Messages have long texts.... Uncheck the self-explanatory box, change your long message to a short one, place your long message in the long text of your message. SAP should handle the rest.
Reward if helpfull...
Cheers,
Ameen.

How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

How to display an error message in Dynamic Actions

Dear Team:
Scenario as below:
Whenever the user creates Contract Elements Record, the begin date should be checked with the hire date in 0041 - Date specifications infotype (Date type) and Date of hire. If this is not equal to, then record should be rejected with an error message. Please let me know how do I write the lines in table V_T588M for infotype 0016.
HOW TO INSERT AN ERROR LINE TO BE DISPLAYED IN DYNAMIC ACTIONS.
Regards
Team Member.
Edited by: Patlolla Mallikarjun on Jul 8, 2009 1:53 PM
Edited by: Patlolla Mallikarjun on Jul 12, 2009 10:13 AM

No replies.

Displaying BEx Error Messages in WebI

Hi
Is it possible to have the BEx error messages displayed in a WebI Report?
We have various scenarios where an error message is returned from customer exit variables, which is displayed nicely in the browser if the BEx query is executed, but is not shown at all when the same query is run in a WebI document.
Is there a way to get this done?
Cheers,
Andrew

Hi Andrew,
a very good suggestion of course, but sadly missing from the XI3.1 integration scenario.
My understanding is that the BW OLAP BAPI (as used externally by WebI, via MDX universes) does not surface these error messages natively .. so this warning isn't sent to the front-end
To some extent, this problem also remains in BI4.0 where the JCo error-handling still isn't fully captured between APS DSL Bridge and the BW BICS API . (unless low level tracing is enabled)
would be interesting to know what tips might be out there in the ecosystem, but i haven't seen any match winners to date.
Regards,
H

How to display custom error message if the Required field is not entered?

Hi,
I have made one input field as required field in a view.
I want to display one custom error message ,if the required input field is not entered.
Please help me regarding this.
Thanks,
Deepika

hi deepika....
First go to message pool under webdynpro components.
Create a new message there..of type error.
Enter your text.
Now to avoid null pointer exception , in wdDoInit(), initialise the value
wdContext.currentDateTimeElement().setDate("");
now create an action for submission of data. If field is empty, then within the button write:
msg = wdComponentAPI.getComponent().getMessageManager();
if(wdContext.currentDateTimeElement().getDate().equals(""))
msg.raiseMessage(IMessageCompTodatDateTime.ERROR,new Object[]{""},true) ;
between begin others put:
regards,
pinki
IWDMessageManager msg = null;

How to display an error Message in Web Dynpro

Similar Messages

Maybe you are looking for