How to display an image in an alv grid in each corresponding row?

Hi,
please tell me how to  display an image in an alv grid in each corresponding row, like;;
tony            23   newyork      <image>
Mkitharyan  63   washington  <image>
NOT BY HOTSPOTS/URL.

you can put image in each cell you want:
data lo_cmp_usage type ref to if_wd_component_usage.
  lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
  if lo_cmp_usage->has_active_component( ) is initial.
    lo_cmp_usage->create_component( ).
  endif.
  DATA lo_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
  lo_INTERFACECONTROLLER =   wd_this->wd_cpifc_alv( ).
    DATA lo_value TYPE ref to cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model(    ).
data col type ref to  CL_SALV_WD_COLUMN.
col = lo_value->IF_SALV_WD_COLUMN_SETTINGS~GET_COLUMN( 'IMAGE' ).
data image type ref to cl_salv_wd_uie_image.
CREATE OBJECT image.
image->SET_SOURCE_FIELDNAME( 'IMAGE' ).
COL->SET_CELL_EDITOR( image  ).

Similar Messages

  • How to display three months data in ALV grid control

    Hi
    Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
    please tell me how to display.
    GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
    Sr. No             Item             Unit           Rate          Qty           Amount             
    GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
    Sr. No             Item             Unit           Rate          Qty           Amount             
    GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
    Sr. No             Item             Unit           Rate          Qty           Amount             
    Thanks & Regards,
    Vasu.
    Moderator message: only one thread per issue, please.
    Edited by: Thomas Zloch on Feb 20, 2012

    Hi
    Thanks for all.I have tried now it is working but as per requirement month name and cumulative total will display like this format.cumulative total means month1amount+ month2amount+month3amount.And one more thing month range will change some times means sometimes i will give January date to march date and sometimes i will give July date to October date. but date range is same means between dates range is three months.
    please tell me how to display.
    GAS PRESSURE WELDING COST EFFECTIVENESS                                        Dec-11                         Cummulativetotal
    Sr. No             Item             Unit           Rate          Qty           Amount             
    GAS PRESSURE WELDING COST EFFECTIVENESS                                      Jan-12
    Sr. No             Item             Unit           Rate          Qty           Amount             
    GAS PRESSURE WELDING COST EFFECTIVENESS                                     Feb-12
    Sr. No             Item             Unit           Rate          Qty           Amount             
    Thanks & Regards,
    Vasu.
    Moderator message: only one thread per issue, please.
    Edited by: Thomas Zloch on Feb 20, 2012

  • How to display sub total text in ALV grid display reporting

    Hi,
    I want to display a text 'SUB TOTAL'  in Sub total  row  of an ALV report.
    Presently I am getting the name of the field used in sorting to get sub totals. But I required to display own text. Could you please give me solution.
    Thanks
    Giridhar Karnam

    For doing this u need to simply modify the layout properties, please award points if found helpful
    DATA: L_LAYOUT TYPE SLIS_LAYOUT_ALV.
    L_LAYOUT-SUBTOTALS_TEXT = 'GEN SUBTOT'.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            I_CALLBACK_PROGRAM = SY-REPID
            IS_LAYOUT          = L_LAYOUT
            IT_FIELDCAT        = IT_FIELDCAT
          TABLES
            T_OUTTAB           = IT_FINAL
          EXCEPTIONS
            PROGRAM_ERROR      = 1
            OTHERS             = 2.

  • How to display a image in webdynpro view using a bytearry

    Hi Frndz..
    How to display an image in a view using webdynpro java ..i have bytearry object in context ..like
    *byte[] img = wdContext.nodeYywwwdataImport_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();*_
    by using this i need to show image in view..
    Kindly help me ....
    Thankas in Advance
    Regards
    Rajesh

    Hi,
    byte[] img = wdContext.nodeYywwwdata_Import_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();
    use this code to create resource and you need to set this value to the context created to display the image suppose in the image UI and set the source property with this attribute:-
    IWDResource res=WDResourceFactory.createCachedResource(b,"MyImage",WDWebResourceType.JPG_IMAGE);
    IPrivateAppView.IVn_ImageTabElement imageEle=wdContext.createVn_ImageTabElement();
           imageEle .setVa_Name(res.toString());
    wdContext.nodeVn_ImageTab().addElement(imageEle);
    Hope this may help you.
    Deepak

  • How to Display an Image on my FORM

    Good Day!
    I would like to ask some help from you guys with my problem on how to display an image on my form. I would like to display my uploaded image on my form but instead of an image, the get_blob_file is showing. By the way, I'm using Apex 4.1
    I downloaded the Order Entry Sample Application and followed the Page 6, the Product Details. I even made snapshots of each details from Page Rendering to Page Processing in order not to miss a thing.
    At the moment, I was able to upload or store the image on my created Oracle table and also able to retrieve it on the Download Link Text with Content Disposition value of Inline, provided by APEX Settings. If I invoke the Download link beside the file browser, a page with the image will be shown, below is the address:
    http://127.0.0.1:8080/apex/apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6&p_content_disposition=inline
    However, instead of showing the image on a region, below is the one showing on my Form:
    <img src="apex_util.get_blob_file?a=200&s=339877802936975&p=230&d=7107921433296839&i=7107601420296838&p_pk1=54&p_pk2=&p_ck=7D6512D967336C4B94258EEA3CDF1BE6" />
    As you can see the parameter values are the same but I know I missed something that's why I'm here :)
    I would highly appreciate all the help you can provide and many thanks in advance.
    I tried to change gear by making an html region of type PL/SQL (anonymous block) and a procedure but still no image :(
    Below are the scripts.
    declare
    cursor cur is
    select *
    from wsemployee
    where empid = :P230_EMPID;
    begin
    for rec in cur
    loop
    IF rec.mime_type is not null or rec.mime_type != '' THEN
    htp.p( '<img src="my_image_display?p_image_id='||NVL(rec.empid,0)||'" height="'||100||'"/>' );
    else
    htp.p( 'No Image ');
    END IF;
    htp.p( ' ');
    end loop;
    end;
    PROCEDURE
    create or replace PROCEDURE my_image_display( p_image_id IN NUMBER)
    AS
    l_mime VARCHAR2 (255);
    l_length NUMBER;
    l_file_name VARCHAR2 (2000);
    lob_loc BLOB;
    BEGIN
    SELECT MIME_TYPE, PHOTO_BLOB_CONTENT, PHOTO_FILENAME,DBMS_LOB.GETLENGTH(photo_blob_content)
    INTO l_mime,lob_loc,l_file_name,l_length
    FROM wsemployee
    WHERE empid = p_image_id;
    -- set up HTTP header
    -- use an NVL around the mime type and
    -- if it is a null set it to application/octect
    -- application/octect may launch a download window from windows
    owa_util.mime_header( nvl(l_mime,'application/octet'), FALSE );
    -- set the size so the browser knows how much to download
    htp.p('Content-length: ' || l_length);
    -- the filename will be used by the browser if the users does a save as
    htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(l_file_name,instr(l_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
    -- close the headers
    owa_util.http_header_close;
    -- download the BLOB
    wpg_docload.download_file( Lob_loc );
    END my_image_display;
    Edited by: user13831927 on Dec 22, 2012 3:24 PM

    Hi Ying,
    you can add a UDF to the table spp2 with a programm
    but the table is not yet listed in the 'Manage User Fields' form.
    there's no way to "enable" it - sorry

  • How to display an Image which is on Panel behind JScrollPane - Please Help

    Hiii All,
    How to display an Image which is on Panel behind JScrollPane. I have set the setOpaque() method of JScrollPane to false still when i run the program the JScrollPane is set as Opaque.. Can some one please help me in this...
    Thanks,
    Piush

    you need to set both
    scrollPane.setOpaque(false);
    scrollPane.getViewport().setOpaque(false);

  • How to display the image which in KM folder using url iview

    Hi Friends
    How to display the image, which is under KM folder structur using the url iview.
    i trying using url iview url as  \document\testfolder\abc.jpg as url for the iview.
    but its now working .. so please help me how to slove this problem
    If is not the correct way then please suggest me best way to achive this.
    Thanks
    Mukesh

    Hi Mukesh,
    I think this may work,
    1, Create a HTML Layout.
        You can put your image wherever  u want with HTML Codes.
        Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
        With this, u can use the standard KM commands also.
    2, U need to use KM Navigation iView for this rather than KM Doc iView.
    3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
    Regards
    BP

  • How to display an image, which is stored in a database?

    Hi All,
    I would like to display an image with Web Dynpro.
    I already know how to display an image which is stored in the path src/mimes/Components/...
    But does anybody knows, how to display an image which is stored in a database (e.g. MaxDB)as a datatype of binary?
    Thanks in advance!
    Regards,
    Silvia

    Hallo John,
    yes, you can use the Image UI element.
    Further you have to create a String for the URL. Implement like as follows:
    IWDCachedWebResource cachedResource = null;
    String imgUrl = null;
    WDAttributeInfo attInfo = wdContext.getNodeInfo().getAttribute(IPrivateXYView.IXYElement.PIC_DB);
    IWDModifiableBinaryType binaryType =
                   (IWDModifiableBinaryType) attInfo.getModifiableSimpleType();
    binaryType.setMimeType(WDWebResourceType.JPG_IMAGE);//Example *.jpg
    WDWebResourceType type = binaryType.getMimeType();
    byte[] file = wdContext.currentXYElement().getPicDB();
    if (file != null)
    cachedResource = WDWebResource.getWebResource(file, type);
    try
    imgUrl = cachedResource.getURL();
    catch (WDURLException e)
    IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
                        msgMgr.reportException(e.getLocalizedMessage(), true);
    I hope it will help you.
    Regards,
    Silvia

  • How do i display text information below an ALV grid.??

    Hi.
    I need to display my output in an ALV GRID.
    also i need to display summary details below the ALV grid. the smmary values keep changing dynamically depending upon selection screen inputs!!

    chk this report..write your code in the footer
    *& Report  ZRJR02                                                      *
    REPORT  ZRJR02                                  .
    *Table declaration.
    TABLES:ZEMP_MST,ZDEPT_MST,ZDESG_MST,ZSL_TXN.
    *Varriable declaration.
    TYPE-POOLS SLIS.
    DATA : POS TYPE I.
    DATA  REPID  LIKE SY-REPID.
    DATA : F1 TYPE SLIS_T_FIELDCAT_ALV,
           F2 TYPE SLIS_FIELDCAT_ALV,
           L_LAYOUT TYPE SLIS_LAYOUT_ALV.
    DATA  L_POS TYPE I VALUE 1.               "position of the column
    DATA  GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
    *DATA  GT_SORT TYPE SLIS_T_SORTINFO_ALV.
    data:  GT_EVENTS    TYPE SLIS_T_EVENT,
           FS_EVENTCAT LIKE LINE OF GT_EVENTs.
    *Internal table declaration.
    *DATA  BEGIN OF IT_SORT OCCURS 5.
    *      INCLUDE TYPE SLIS_SORTINFO_ALV.
    *DATA  END OF IT_SORT.
    DATA:BEGIN OF ITAB OCCURS 0,
          ZEMPNO    LIKE ZEMP_MST-ZEMPNO,
          ZEMPNAME  LIKE ZEMP_MST-ZEMPNAME,
          ZDEPTCD   LIKE ZEMP_MST-ZDEPTCD,
          ZDEPTNAME LIKE ZDEPT_MST-ZDEPTNAME,
          ZDESGCD   LIKE ZEMP_MST-ZDESGCD,
          ZDESGNAME LIKE ZDESG_MST-ZDESGNAME,
         END OF ITAB.
    REFRESH ITAB.CLEAR ITAB.
    START-OF-SELECTION.
    SELECT A~ZEMPNO A~ZEMPNAME A~ZDEPTCD B~ZDEPTNAME A~ZDESGCD C~ZDESGNAME
           FROM ZEMP_MST AS A
             INNER JOIN ZDEPT_MST AS B
               ON A~ZDEPTCD EQ B~ZDEPTCD
             INNER JOIN ZDESG_MST AS C
               ON A~ZDESGCD EQ C~ZDESGCD
           INTO CORRESPONDING FIELDS OF TABLE ITAB.
    IF SY-SUBRC <> 0.
       MESSAGE E899(M3) WITH 'No records'.
    ENDIF.
    perform f_build_eventcat.
    PERFORM LAYOUT.
    END-OF-SELECTION.
    *&      Form  LAYOUT
    FORM LAYOUT .
      PERFORM FCAT USING 'ZEMPNO'    'ITAB' '' 'Emp.No.'   'ZEMPNO'    'ZEMP_MST'  ''.
      PERFORM FCAT USING 'ZEMPNAME'  'ITAB' '' 'Emp. Name' 'ZEMPNAME'  'ZEMP_MST'  ''.
      PERFORM FCAT USING 'ZDEPTCD'   'ITAB' '' 'Dept.Code' 'ZDEPTCD'   'ZEMP_MST'  ''.
      PERFORM FCAT USING 'ZDEPTNAME' 'ITAB' '' 'Dept.Name' 'ZDEPTNAME' 'ZDEPT_MST' ''.
      PERFORM FCAT USING 'ZDESGCD'   'ITAB' '' 'Desg.Code' 'ZDESGCD'   'ZEMP_MST'  ''.
      PERFORM FCAT USING 'ZDESGNAME' 'ITAB' '' 'Desg.Name' 'ZDESGNAME' 'ZDESG_MST' ''.
    *  PERFORM LSORT USING  'ZEMPNO' 'IDATA' ''.
    *  PERFORM LSORT USING  'ZEMPNAME' 'IDATA' ''.
    *  MOVE IT_SORT[] TO GT_SORT[].
      REPID = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
        EXPORTING
             I_CALLBACK_PROGRAM       = REPID
             IT_FIELDCAT              = F1
    *         IT_SORT                  = GT_SORT
             I_SAVE                   = 'X'
             IT_EVENTS                = GT_EVENTS[]
         TABLES
              T_OUTTAB                 = ITAB.
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " LAYOUT
    *&      Form  FCAT
    FORM FCAT USING P_FIELD P_TABLE P_SUM P_TEXT P_RFIELD P_RTABLE P_DISP.
      ADD 1 TO POS.
      F2-COL_POS       = POS.
      F2-FIELDNAME     = P_FIELD.
      F2-TABNAME       = P_TABLE.
      F2-SELTEXT_L     = P_TEXT.
      F2-REF_FIELDNAME = P_RFIELD.
      F2-REF_TABNAME   = P_RTABLE.
      F2-DO_SUM        = P_SUM.
      F2-NO_OUT        = P_DISP.
      APPEND F2 TO F1.
      CLEAR F2.
    ENDFORM.                " FCAT
    *&      Form  LSORT
    *FORM LSORT USING P_FIELD P_TABLE P_UP.
    *  ADD 1 TO L_POS.
    *  IT_SORT-SPOS      = L_POS.
    *  IT_SORT-FIELDNAME = P_FIELD.
    *  IT_SORT-TABNAME   = P_TABLE.
    *  IT_SORT-UP        = P_UP.
    *  APPEND IT_SORT.
    *ENDFORM.                    " LSORT
    FORM F_BUILD_EVENTCAT .
    CLEAR: GT_EVENTS.  REFRESH: GT_EVENTS.
      CLEAR: FS_EVENTCAT.
      FS_EVENTCAT-NAME = 'TOP_OF_PAGE'.
      FS_EVENTCAT-FORM = 'F_REPORT_HEADER_ALV'.
      APPEND FS_EVENTCAT TO GT_EVENTS.
      CLEAR: FS_EVENTCAT.
      FS_EVENTCAT-NAME = 'END_OF_LIST'.
      FS_EVENTCAT-FORM = 'F_WRITE_SUMMARY'.
      APPEND FS_EVENTCAT TO GT_EVENTS.
    ENDFORM.                    " F_BUILD_EVENTCAT
    FORM F_REPORT_HEADER_ALV.
    CALL FUNCTION 'Z_YHEAD_PRINT'
    EXPORTING
       TITLE1        = 'XYZ Limited'
       TITLE2        = 'Employee Master'
       TITLE3        = 'Created on '
       COLOR         = 'X'
    ENDFORM.
    *&      Form  F_WRITE_SUMMARY
    *       Write summary before exit
    FORM F_WRITE_SUMMARY .
    write:/ 'Welcome to XYZ Limited'.
    write:/ 'This is a test program to display Report in ALV Format'.
    ENDFORM.

  • How to get Grand Total Text in ALV GRID

    Hi Folks,
    I am able to get the SUBTOTAL TEXT .....But i need...
    How to get Grand Total Text in ALV GRID Display...
    Can any one give a Solution for this...

    Hi Surendar,
    Check out this code.. this is showing Total Text in Toal line in the very first column.
    REPORT  zsales_ord_det_1                        .
    TABLES: ztable_10.
    TYPE-POOLS: slis.
    DATA: BEGIN OF it OCCURS 0,
    srno(6) type c,
    name LIKE ztable_10-name,
    age LIKE ztable_10-age,
    END OF it.
    DATA : BEGIN OF it_temp OCCURS 0,
    name LIKE ztable_10-name,
    age LIKE ztable_10-age,
    END OF it_temp.
    DATA: i_fieldcat  TYPE slis_t_fieldcat_alv,
          wa_fieldcat TYPE  slis_fieldcat_alv.
    DATA: v_repid LIKE sy-repid,
           i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
           gs_layout TYPE slis_layout_alv,
           gd_layout TYPE slis_layout_alv,
           i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
           wa_sort TYPE slis_sortinfo_alv.
    START-OF-SELECTION.
      v_repid = sy-repid.
      SELECT * FROM ztable_10 INTO TABLE it_temp.
      LOOP AT it_temp .
        it-srno = 'Total'.
        it-name = it_temp-name.
        it-age = it_temp-age.
        APPEND  it.
      ENDLOOP.
    END-OF-SELECTION.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
         i_program_name               = v_repid
         i_internal_tabname           = 'IT'
      I_STRUCTURE_NAME             =
      I_CLIENT_NEVER_DISPLAY       = 'X'
         i_inclname                   = v_repid
      I_BYPASSING_BUFFER           =
      I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = i_fieldcat[]
       EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    wa_fieldcat-row_pos = 1.
    wa_fieldcat-col_pos = 1.
    wa_fieldcat-fieldname = 'SRNO'.
    wa_fieldcat-tabname = it.
    append wa_fieldcat to i_fieldcat.
      LOOP AT i_fieldcat INTO wa_fieldcat.
        IF wa_fieldcat-fieldname = 'AGE'.
          wa_fieldcat-do_sum = 'X'.
          MODIFY i_fieldcat FROM wa_fieldcat.
        ENDIF.
       IF wa_fieldcat-fieldname = 'SRNO'.
         Hide this field so that it can display it's content i.e.
            Total text in Subtotal level
        wa_fieldcat-tech = 'X'.
          wa_fieldcat-no_out = 'X'.
          MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
       ENDIF.
      ENDLOOP.
    wa_sort-spos = 1.
    wa_sort-fieldname = 'SRNO'.
    wa_sort-up = 'X'.
    wa_sort-subtot = 'X'.
    APPEND wa_sort TO i_sort.
      gd_layout-no_totalline = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                = ' '
      I_BUFFER_ACTIVE                       = ' '
         i_callback_program                        = v_repid
      I_CALLBACK_PF_STATUS_SET     = ' '
    i_callback_user_command                = 'USER_COMMAND'
      I_CALLBACK_TOP_OF_PAGE         = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE  = ' '
      I_CALLBACK_HTML_END_OF_LIST    = ' '
      I_STRUCTURE_NAME                       =
      I_BACKGROUND_ID                        = ' '
      I_GRID_TITLE                                  =
      I_GRID_SETTINGS                          =
         is_layout                                      = gd_layout
         it_fieldcat                                      = i_fieldcat[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
         it_sort                           = i_sort
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_HYPERLINK                      =
      IT_ADD_FIELDCAT                   =
      IT_EXCEPT_QINFO                   =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = it
       EXCEPTIONS
         program_error                     = 1
         OTHERS                            = 2
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    Regards,
    Seema

  • How to find the selected item in alv grid or table control

    can any one tell me please
    how to find the selected item in alv grid or table control

    In table control, If you goto screen painter and goto table control properties ( f2 ), there is one check-box w/selColumn check that and give column name. Then add that column to your internal table.
    IN PAI
      LOOP AT it_tkhdr.
        FIELD it_tkhdr-sel_row
          MODULE tab_tkhdr_mark ON REQUEST.
      ENDLOOP.
    MODULE tab_tkhdr_mark INPUT.
      MODIFY it_tkhdr INDEX tc_tkhdr-current_line.
    ENDMODULE.                 " tab_tkhdr_mark  INPUT
    here it_TKHDR is internal table sel_row is field for selection
    After that, you can loop at it_tkhdr where sel_row is 'X' to get selected rows.
    regards,
    Gagan

  • How to trigger top-of-page in ALV Grid

    How to trigger Top-Of-Page in ALV Grid...
    can any one plese send the sample code...
    thanks.

    here is sample code. try this. u need to build an internal table and then call function commentary write and pass that internal table.
    *&      Form  TOP_OF_PAGE
          Top_of_page
    FORM top-of-page.                                           "#EC CALLED
    *ALV Header declarations
      DATA: lit_header TYPE slis_t_listheader,
            lwa_header TYPE slis_listheader.
    Title
      lwa_header-typ  = 'H'.
      lwa_header-info = text-013.
      APPEND lwa_header TO lit_header.
      CLEAR lwa_header.
    BOM Number
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
        EXPORTING
          input  = p_matnr
        IMPORTING
          output = gv_matnr.
    Pass BOM number
      lwa_header-typ  = 'S'.
      lwa_header-key = text-014.
      lwa_header-info = gv_matnr .
      APPEND lwa_header TO lit_header.
      CLEAR: lwa_header ,
             gv_matnr .
    BOM description
      lwa_header-typ  = 'S'.
      lwa_header-key = text-015 .
      lwa_header-info = gv_maktx .
      APPEND lwa_header TO lit_header.
      CLEAR: lwa_header.
    start/end date format MM/DD/YY
      lwa_header-typ  = 'S'.
      lwa_header-key = text-016 .
      CONCATENATE s_erdat-low+4(2) '/'
                  s_erdat-low+6(2) '/'
                  s_erdat-low(4) ' - '
                  s_erdat-high+4(2) '/'
                  s_erdat-high+6(2) '/'
                  s_erdat-high(4)
                  INTO lwa_header-info.
      APPEND lwa_header TO lit_header.
      CLEAR: lwa_header.
    Run Date of Report format MM/DD/YY
      lwa_header-typ  = 'S'.
      lwa_header-key = text-017 .
      CONCATENATE  sy-datum+4(2) '/'
                   sy-datum+6(2) '/'
                   sy-datum(4) INTO lwa_header-info .
      APPEND lwa_header TO lit_header.
      CLEAR: lwa_header.
    call function REUSE_ALV_COMMENTARY_WRITE to use TOP_OF_PAGE event.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          it_list_commentary = lit_header.
    ENDFORM .                              " FORM top-of-page.

  • Hi, coding to display popup window after first alv grid display

    hi
    can anybody please send coding to display popup window after first alv grid display i.e.  first the prog shows grid display and from grid display the user select the field and on the basis of field value i need to show pop up window in the first secondary window and then third popup window.
    thanx
    rocky

    Hi rocky,
    here is the sample code .hope this helps you.
    TYPE-POOLS : SLIS.
    DATA : GT_OUTTAB TYPE VBAK OCCURS 0,
           GS_PRIVATE TYPE SLIS_DATA_CALLER_EXIT,
           GS_SELFIELD TYPE SLIS_SELFIELD.
    DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
           WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    DATA : ITAB TYPE TABLE OF SLIS_SELFIELD,
           WA_ITAB LIKE LINE OF ITAB.
    START-OF-SELECTION.
    PERFORM POPULATE_GT_OUTTAB.
    PERFORM GET_POPUP.
    PERFORM POPULATE_ITAB.
    PERFORM FIELDCAT.
    PERFORM DISPLAY_DETAILS.
    *&      Form  FIELDCAT
          text
    -->  p1        text
    <--  p2        text
    FORM FIELDCAT .
    LOOP AT ITAB INTO WA_ITAB.
    WA_FIELDCAT-FIELDNAME = 'TABINDEX'.
    WA_FIELDCAT-TABNAME = 'WA_ITAB'.
    WA_FIELDCAT-COL_POS = 1.
    WA_FIELDCAT-SELTEXT_L = 'TABLE INDEX'.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    WA_FIELDCAT-FIELDNAME = 'SEL_TAB_FIELD'.
    WA_FIELDCAT-TABNAME = 'WA_ITAB'.
    WA_FIELDCAT-COL_POS = 2.
    WA_FIELDCAT-OUTPUTLEN = 20.
    WA_FIELDCAT-SELTEXT_L = 'FIELD NAME'.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    WA_FIELDCAT-FIELDNAME = 'VALUE'.
    WA_FIELDCAT-TABNAME = 'WA_ITAB'.
    WA_FIELDCAT-COL_POS = 3.
    WA_FIELDCAT-SELTEXT_L = 'FIELD VALUE'.
    APPEND WA_FIELDCAT TO IT_FIELDCAT.
    ENDLOOP.
    ENDFORM.                    " FIELDCAT
    *&      Form  POPULATE_GT_OUTTAB
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_GT_OUTTAB .
    SELECT * FROM VBAK
           UP TO 10 ROWS
           INTO TABLE GT_OUTTAB.
    ENDFORM.                    " POPULATE_GT_OUTTAB
    *&      Form  GET_POPUP
          text
    -->  p1        text
    <--  p2        text
    FORM GET_POPUP .
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
       I_TITLE                       = 'SALES ORDER'
      I_SELECTION                   = 'X'
      I_ALLOW_NO_SELECTION          =
       I_ZEBRA                       = 'X'
      I_SCREEN_START_COLUMN         = 0
      I_SCREEN_START_LINE           = 0
      I_SCREEN_END_COLUMN           = 0
      I_SCREEN_END_LINE             = 0
      I_CHECKBOX_FIELDNAME          =
      I_LINEMARK_FIELDNAME          =
      I_SCROLL_TO_SEL_LINE          = 'X'
        I_TABNAME                     = 'SALES ORDER'
        I_STRUCTURE_NAME              = 'VBAK'
      IT_FIELDCAT                   =
      IT_EXCLUDING                  =
      I_CALLBACK_PROGRAM            =
      I_CALLBACK_USER_COMMAND       =
       IS_PRIVATE                    = GS_PRIVATE
    IMPORTING
       ES_SELFIELD                   = GS_SELFIELD
      E_EXIT                        = G_EXIT
      TABLES
        T_OUTTAB                      = GT_OUTTAB
    EXCEPTIONS
       PROGRAM_ERROR                 = 1
       OTHERS                        = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " GET_POPUP
    *&      Form  POPULATE_ITAB
          text
    -->  p1        text
    <--  p2        text
    FORM POPULATE_ITAB .
    WA_ITAB-TABNAME = GS_SELFIELD-TABNAME.
    WA_ITAB-TABINDEX = GS_SELFIELD-TABINDEX.
    WA_ITAB-SEL_TAB_FIELD = GS_SELFIELD-SEL_TAB_FIELD.
    WA_ITAB-VALUE = GS_SELFIELD-VALUE.
    APPEND WA_ITAB TO ITAB.
    ENDFORM.                    " POPULATE_ITAB
    *&      Form  DISPLAY_DETAILS
          text
    -->  p1        text
    <--  p2        text
    FORM DISPLAY_DETAILS .
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_INTERFACE_CHECK              = ' '
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                = ' '
      I_CALLBACK_PROGRAM             = ' '
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
      I_STRUCTURE_NAME               =
      IS_LAYOUT                      =
       IT_FIELDCAT                    = IT_FIELDCAT
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
      IT_SORT                        =
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
      IT_EVENTS                      =
      IT_EVENT_EXIT                  =
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
      TABLES
        T_OUTTAB                       = ITAB
    EXCEPTIONS
       PROGRAM_ERROR                  = 1
       OTHERS                         = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.                    " DISPLAY_DETAILS
    award points if helpful.
    regards,
    deepthi reddy

  • How to display URL images and URL link (html) from Smartforms?

    Hi Gurus,
    I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
    /people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
    My code is like this..
    <--- Start Code.
    FORM call_smartforms.
      DATA : lv_subject TYPE so_obj_des,
             lc_true(1) VALUE 'X',
             lw_control_parameters TYPE ssfctrlop,
             lw_output_options TYPE ssfcompop,
             lc_graphics(8) VALUE 'GRAPHICS',
             lw_xsfparam_line TYPE ssfxsfp,
             lc_extract(7) VALUE 'EXTRACT',
             lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
             lc_mygraphics(11) VALUE 'mygraphics/',
             lc_content_id(10) VALUE 'CONTENT-ID',
             lc_enable(6) VALUE 'ENABLE',
             lw_job_output_info TYPE ssfcrescl,
             lw_html_data TYPE trfresult,
             lw_graphics TYPE ssf_xsf_gr,
             lt_graphics TYPE tsf_xsf_gr,
             lv_html_xstr TYPE xstring,
             lw_html_raw LIKE LINE OF lw_html_data-content,
             lv_incode TYPE tcp00-cpcodepage VALUE '4110',
             lv_html_str TYPE string,
             lv_html_len TYPE i,
             lc_utf8(5) VALUE 'utf-8',
             lc_latin1(6) VALUE 'latin1',
             lv_offset TYPE i,
             lv_length TYPE i,
             lv_diff TYPE i,
             lt_soli TYPE soli_tab,
             lw_soli TYPE soli,
             lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
             lv_name TYPE mime_text VALUE 'sapwebform.htm',
             lv_xstr TYPE xstring,
             lw_raw TYPE bapiconten,
             lt_solix TYPE solix_tab,
             lw_solix TYPE solix,
             lv_filename TYPE string,
             lv_content_id TYPE string,
             lv_content_type TYPE w3conttype,
             lv_obj_len TYPE so_obj_len,
             lv_bmp TYPE so_fileext VALUE 'BMP',
             lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
             lc_doc_bcs TYPE REF TO cl_document_bcs,
             lc_bcs TYPE REF TO cl_bcs,
             lc_send_exception TYPE REF TO cx_root,
             lw_adsmtp TYPE lty_adsmtp,
             lv_mail_address TYPE ad_smtpadr,
             lc_recipient TYPE REF TO if_recipient_bcs,
             lc_send_request TYPE REF TO cl_bcs,
             lv_sent_to_all TYPE os_boolean.
      DATA : v_language TYPE sflangu VALUE 'E',
             v_e_devtype TYPE rspoptype.
      v_form_name = 'ZTEST_EMAIL'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = v_form_name
        IMPORTING
          fm_name            = v_namef
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    starting here. ***
    Set title for the output
      lv_subject = 'Smartforms.'.
    Set control parameters to "no dialog"
      lw_control_parameters-no_dialog = lc_true.
    IF lw_service_subject-code = lc_fm1.
    *--- To get output device type
      CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
        EXPORTING
          i_language    = v_language
          i_application = 'SAPDEFAULT'
        IMPORTING
          e_devtype     = v_e_devtype.
      lw_output_options-tdprinter = v_e_devtype.
      lw_control_parameters-getotf = 'X'.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
    Set output options
      lw_output_options-xsf        = lc_true.
      lw_output_options-xsfcmode   = lc_true.
      lw_output_options-xsfoutmode = 'A'.
      lw_output_options-xsfoutdev  = space.
      lw_output_options-xsfformat  = lc_true.
      lw_xsfparam_line-name  = lc_graphics.
      lw_xsfparam_line-value = lc_extract.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_graphics_directory.
      lw_xsfparam_line-value = lc_mygraphics.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
      lw_xsfparam_line-name  = lc_content_id.
      lw_xsfparam_line-value = lc_enable.
      APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
    Get the smartform content
      CALL FUNCTION v_namef
        EXPORTING
          control_parameters   = lw_control_parameters
          output_options       = lw_output_options
    *pass other application specific parameters (eg order number, items ).
      IMPORTING
          job_output_info    = lw_job_output_info
      TABLES
          tt_tabh              = tt_tabh
          tt_tabb              = tt_tabb
          tt_tabf              = tt_tabf
      EXCEPTIONS
          formatting_error = 1
          internal_error   = 2
          send_error       = 3
          user_canceled    = 4
          OTHERS           = 5.
      IF sy-subrc = 0.
       break mhusin.
      ENDIF.
      lw_html_data  = lw_job_output_info-xmloutput-trfresult.
      lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
      CLEAR lv_html_xstr.
      LOOP AT lw_html_data-content INTO lw_html_raw.
        CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
      ENDLOOP.
      lv_html_xstr = lv_html_xstr(lw_html_data-length).
      CALL FUNCTION 'SCP_TRANSLATE_CHARS'
        EXPORTING
          inbuff       = lv_html_xstr
          incode       = lv_incode
          csubst       = lc_true
          substc_space = lc_true
        IMPORTING
          outbuff      = lv_html_str
          outused      = lv_html_len
        EXCEPTIONS
          OTHERS       = 1.
    *HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
    *EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
      REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
      REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
    CALL METHOD html_control - >load_mime_object
       EXPORTING
         object_id  = 'ZWN'
         object_url = 'ZWN.GIF'
       EXCEPTIONS
         OTHERS     = 1.
      REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
    REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
       break mhusin.
      lv_html_len = STRLEN( lv_html_str ).
      lv_offset = 0.
      lv_length = 255.
      WHILE lv_offset < lv_html_len.
        lv_diff = lv_html_len - lv_offset.
        IF lv_diff > lv_length.
          lw_soli-line = lv_html_str+lv_offset(lv_length).
        ELSE.
          lw_soli-line = lv_html_str+lv_offset(lv_diff).
        ENDIF.
        APPEND lw_soli TO lt_soli.
        ADD lv_length TO lv_offset.
      ENDWHILE.
      CREATE OBJECT lc_mime_helper.
      CALL METHOD lc_mime_helper->set_main_html
        EXPORTING
          content     = lt_soli
          filename    = lv_name
          description = lv_subject.
      LOOP AT lt_graphics INTO lw_graphics.
        CLEAR lv_xstr.
        LOOP AT lw_graphics-content INTO lw_raw.
          CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
        ENDLOOP.
        lv_xstr = lv_xstr(lw_graphics-length).
        lv_offset = 0.
        lv_length = 255.
        CLEAR lt_solix[].
        WHILE lv_offset < lw_graphics-length.
          lv_diff = lw_graphics-length - lv_offset.
          IF lv_diff > lv_length.
            lw_solix-line = lv_xstr+lv_offset(lv_length).
          ELSE.
            lw_solix-line = lv_xstr+lv_offset(lv_diff).
          ENDIF.
          APPEND lw_solix TO lt_solix.
          ADD lv_length TO lv_offset.
        ENDWHILE.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
        CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
        lv_content_type = lw_graphics-httptype.
        lv_obj_len      = lw_graphics-length.
    *Add images to the email
        CALL METHOD lc_mime_helper->add_binary_part
          EXPORTING
            content      = lt_solix
            filename     = lv_filename
            extension    = lv_bmp
            description  = lv_description
            content_type = lv_content_type
            length       = lv_obj_len
            content_id   = lv_content_id.
      ENDLOOP.
      TRY.
          lv_subject = lv_subject.
          lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
                   i_subject          = lv_subject
                   i_multirel_service = lc_mime_helper ).
        CATCH cx_document_bcs INTO lc_send_exception.
        CATCH cx_bcom_mime INTO lc_send_exception.
        CATCH cx_gbt_mime INTO lc_send_exception.
      ENDTRY.
    Create send request
      TRY.
          lc_bcs = cl_bcs=>create_persistent( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->set_document( i_document = lc_doc_bcs ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Set-up email receiver
      lv_mail_address = '[email protected]'.
    TRANSLATE lv_mail_address TO UPPER CASE.
      TRY.
          lc_recipient = cl_cam_address_bcs=>create_internet_address(
              i_address_string = lv_mail_address ).
        CATCH cx_address_bcs INTO lc_send_exception.
      ENDTRY.
      TRY.
          lc_bcs->add_recipient( i_recipient = lc_recipient ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
    Send smartforms as HTML email
      TRY.
          lc_bcs->send( ).
        CATCH cx_send_req_bcs INTO lc_send_exception.
      ENDTRY.
      COMMIT WORK.
      WRITE:/ 'Mail sent'.
    ENDFORM.                    "call_smartforms
    End Code --->
    Thanks and Regards.

    1- put your images in a directory under the web app directory. Example: app/images/
    2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
    3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

  • How to capture the checkbox status in ALV Grid display

    I need some immediate help regarding Grid ALV.
    My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
    My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
    Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
    Kinldy suggest how to go about it.
    I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
    Regards,
    Namrata

    Here is a Sample code , it might help you
    TABLES : sflight.
    TYPE-POOLS: slis.
    DATA : w_repid LIKE sy-repid.
    w_repid = sy-repid.
    DATA: BEGIN OF it_sflight OCCURS 0,
      checkbox(1),
      carrid LIKE sflight-carrid,
    END OF it_sflight.
    *layout
    DATA: wa_layout TYPE slis_layout_alv.
    *field catalog
    DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
              wa_fieldcatalog TYPE slis_fieldcat_alv.
    START-OF-SELECTION.
      SELECT carrid FROM sflight
         INTO CORRESPONDING FIELDS OF TABLE it_sflight.
    END-OF-SELECTION.
      CLEAR it_fieldcatalog.
      REFRESH it_fieldcatalog.
      wa_fieldcatalog-fieldname = 'CHECKBOX'.
      wa_fieldcatalog-outputlen = '3'.
      wa_fieldcatalog-col_pos = '1'.
      wa_fieldcatalog-seltext_m = 'Chk'.
      wa_fieldcatalog-checkbox = 'X'.
      wa_fieldcatalog-edit = 'X'.
      APPEND wa_fieldcatalog TO it_fieldcatalog.
      CLEAR wa_fieldcatalog.
      wa_fieldcatalog-fieldname = 'CARRID'.
      wa_fieldcatalog-outputlen = '10'.
      wa_fieldcatalog-col_pos = '2'.
      wa_fieldcatalog-seltext_m = 'Carrid'.
      APPEND wa_fieldcatalog TO it_fieldcatalog.
      CLEAR wa_fieldcatalog.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = w_repid
          is_layout = wa_layout
          i_callback_user_command = 'USER_COMMAND'
          it_fieldcat = it_fieldcatalog
        TABLES
          t_outtab = it_sflight
        EXCEPTIONS
          program_error = 1
          OTHERS = 2.
    *& Form USER_COMMAND
    FORM user_command USING p_ucomm TYPE sy-ucomm
      p_selfld TYPE slis_selfield.
      CASE p_ucomm.
       WHEN '&DATA_SAVE'.
          DATA ref1 TYPE REF TO cl_gui_alv_grid.
          CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
             IMPORTING
               e_grid = ref1.
          CALL METHOD ref1->check_changed_data.
          LOOP AT it_sflight WHERE checkbox = 'X'.
             DELETE it_sflight INDEX sy-tabix.
          ENDLOOP.
          p_selfld-refresh = 'X'.
      ENDCASE.
    ENDFORM. "user_command

Maybe you are looking for