How to display and edit the clob datatype column from Data base

Hi ,
I have a requiremsnt as below
1) One Table having some columns with CLOB data type along with varchar columns
2) need to display the data from DB in search screen and need to be edited clob column in edit screen
I created EO and VO with that Table and how to display the clob value into the input box for editing.
using Jdev 11.1.1.5.0 version.
Can you please help on this.
THanks & REgards,
Madhu

Hi,
If you are using an inputText component to display a Character Large Object (CLOB), then you will need to create a custom converter that converts the CLOB to a String.
For custom convertor refer below link,
http://docs.oracle.com/cd/E2438201/web.1112/e16181/af_validate.htm#BABGIEDH
(section7.4 Creating Custom JSF Converters)
Thanks,
Santosh M E

Similar Messages

  • How to find and edit the seeded invoice template from receivables

    Hi,
    I want to edit the seeded invoice template which comes from receivables. How can I see the name of the template, as I run the invoice from Transaction -> Transactions -> Open an Invoice and then click on the button next to the Transaction Number. I have tried finding it in XML Publisher responsibility, but I cannot find that particular template.
    Thank you in advance!

    Hi,
    I believe I have my answer now, or at least a good thread on the subject going hear:
    http://forums.java.net/jive/thread.jspa?threadID=45148
    Thanks,
    Mark

  • How to see and edit the SOURCE

    I'd like to see and edit the source of my pages on iWeb, is it possible ?
    Thanks

    A favorite among many is Taco. There is also a collection of other iWeb tools and resources here.
    -Mark

  • How to find and replacing the path (url) given for data binding from type 'datasocket'

    Hi everyone,
    I'm sorry to pose this question as my own knowledge is still very limited.
    I have an assignment (bachelor level). We were asked to adjust a plc program in step7 so that multiple of an existing sequence could be run indepently.
    The settings for that sequence are controlled by labview. Sensor data is also viewed in labview.
    There is an existing labview VI that was made by someone else before us. It uses 'Datasocket' type for data binding. Because we would like to adjust this VI to be used with the other sequences, we would like to change the original path or URL quickly, as in a 'Find&Replace' solution. Yet the find and replace only works for objects or text, not entries in the properties.
    Can someone please tell me if there is a way to do is, without having to use shared variables, as we are not at all known with this type.
    Many thanks,
    Niels

    Dear Niels,
    Please find the attached example. I placed 5 controls on the front panel, all with a data socket URL (control 1 = URL1, control 2 = URL2 etc). Through property nodes I did the following;
    - I got a reference to the front panel
    - with this reference we can get an array of references to the controls on this front panel
    - one by one we will read the references and check the data socket URL from the control, we compare this with the URL we are searching
    - if found, stop we will use the reference to write a new URL to the control.
    Please notice the default values of the controls; it is set to search for URL3 and replace this with URL10, run the VI once and you will see that happening. I also included a sting indicator which will show you the label of the control which we find. Also a Boolean indicator in case we were not able to find the URL.
    I downsaved the VI to 8.6, I'm not sure in which version you are working, if you have 8.6 or higher you are able to open it. Hope this brings you further,
    Best regards,
    Martijn S
    Applications Engineer
    NI Netherlands
    Attachments:
    findURLexample.vi ‏12 KB

  • How to display and edit blob or OrdImage

    Hi
    I need to keep images and or other files in database and i am trying to find out how to manage them with jdeveloper 11g fusion application.
    I tried the examples for 10g as in:
    http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html
    and
    http://kuba.zilp.pl/?id=241
    but they dont work, there is no <af:objectMedia .../> control in 11g.
    I tryied with <af:media.../> but still doesnt work.
    any clues?

    Hi,
    from the tag documentation:
    "The media component displays media content, such as audio, video, or image in a player embedded in the user agent."
    "The objectMedia component displays media content, such as audio, video, or image in a player embedded in the user agent."
    So indeed the two seem to be identical.
    Frank

  • How to display HyperLink on the DataGrid Component  column  data.

    Hi ,
    I am able to display customer data on to the DataGrid with the help of a ArrayCollection,
    Similar as shown :
    <mx:columns>
    <mx:DataGridColumn dataField="customerid"  headerText="Employee ID"
                       itemRenderer=""/> 
          </mx:columns>
    Please tell me what should be the value inside the itemRenderer to make the customerid display as an HyperLink ??
    I am struck up mx.controls.----?? value on to the itemRenderer 
    Please suggest .
    Thanks in advance .

    And Following is answer for http://forums.adobe.com/thread/630928?tstart=0
    <mx:DataGridColumn headerText="Employee ID"
    editorDataField="text" dataField="customerid"
    itemRenderer="mx.controls.TextInput" editable="true"/>
    Just replace TextInput--->YPaticular  controll(LinkButton)
    please help to answer this
    http://forums.adobe.com/thread/630962
    Happy codding....

  • How to find and replace the table name/column name

    We have just upgraded the application to R12. Have many reports developed in Oracle Reports Builder. There are many changes in R12 table and column names when compare with 11i. Please suggest a solution to change the table name or column name in multiple reports queries instead of doing manually.

    A Google search may turn up a downloadable service manual for the Laserjet 4600.
    You might also ask in the HP Enterprise Business Community Forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to convert and edit HD video

    Because of the widely using of HD Camcorder, now it is really convenient to record family parties and other things you are interested in. Nowadays, people would like to share their things with the rest of the world through Internet, such as youtube.com and other video websites.
    This guide aims to show you how to convert and edit the video you recorded using your HD camcorder
    What you need is a powerful HD Converter.
    Step 1: Load Video
    Click “Add File” to load the video that you want to convert.
    Step 2: Choose Your Output Profile and Settings.
    From “Profile” drop-down list you can choose your output profile according to your need.
    You can also click “setteing”adjust the settings of your output video, such as “video/audio encoder”, “Video/audio Bitrate”, “Channels”, “Resolution” and so on..
    Step 3: Video Editing.
    This powerful MTS Converter allows you to do many video editings.
    1. Click "Effect". to make special effect for your movie.
    You can adjust the “Brightness”, “Contrast”, “Saturation” and also you can use “deinterlacing” to improve you output effect.
    2. Trim: .
    “Trim” function allows you to pick up any part of your video to convert. You can just convert a part of your video that you want.
    3: Crop: .
    Cut off the black edges of the original movie video and watch in full screen on your iPod using the "Crop" function.
    Step 4: Conversion.
    After you have done all the steps above you can click “Start” button to start your conversion.
    Here I also recommend you some High Definition video converter, MTS Converter, M2TS Converter.
    Hulu Downloader
    Total Video Converter
    Best DVD Ripper

    @ Tamwini
    Your only goal is to sell software.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • How to export and import the lsmw

    Hi Friends,
    How to export and import the objects in lsmw
    from dev to qas(quality) systems........
    its urgent.........
    regards,
    venu.

    best way is to create a transport and move it to other enviroments
    There are two ways of Transporting for this. Can choose any one.
    Goto the LSMW Transaction
    1)Extras>Export Projects>(Give the Project name)
    In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
    A text file will be downloaded.
    In the Target System
    Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
    2)Extras-->Generate Change Request
    Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

  • Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

    Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
    I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
    I have attached the VI.
    Thanks for the help
    Attachments:
    new_control_and_acquisition_program.vi ‏946 KB

    Take a look at this document that discusses how to monitor IMAQ memory usage:
    http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
    Hope this helps -
    Julie

  • How open and edit the coherence.xml file?

    How can I open and edit the coherence.xml file?
    I cannot find the coherence.xml file in the coherence.jar package.
    Thank you,
    June

    If you are intent on changing the coherence.xml file, then you could use the JAR command (that comes with Java) to extract the coherence.xml file from coherence.jar and the later repackage the coherence.jar file using the udpated coherence.xml file, e.g.:
    C:\java\opt\coherence-331\lib>jar -xvf coherence.jar tangosol-coherence.xmlextracted: tangosol-coherence.xml>
    Instead of using JAR, on Windows you can associate the .JAR, .WAR and .EAR extensions with WinZip and use it to access / modify the contents of JAR files.
    However, the suggested approach is as follows, and does not include any changes to the tangosol.jar file:
    The tangosol-coherence-override-dev.xml file can be found in the coherence.jar file. After editing this file (in this case to define a unique value for the port system-property value for the multicast listener), save the file and add it to the server's classpath. When the server is executed, the values in the tangosol-coherence-override-dev.xml file will override any corresponding settings in the tangosol-coherence.xml file.Peace,
    Cameron Purdy | Oracle Coherence

  • HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    Have the project, events and media on one drive which is common to both macs.
    You can download FCP X to both macs using the same Apple ID that it was purchased with.
    Andy

  • Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisitio​n VI to predict when it is time to cease the acquisitio​n to prevent the program crashing?

    Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
    I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
    I have attached the VI.
    Thanks for the help
    Attachments:
    new_control_and_acquisition_program.vi ‏946 KB

    got these vi's off ni site a while ago - see if they help
    Attachments:
    Memory_Monitor.zip ‏132 KB

  • How to create and edit anomalous tables in DIAdem? Such as the example list.

    How to create and edit anomalous tables in DIAdem?
    Can the tables  be edited as in MS Word?
    帖子被yangafreet在08-21-2007 10:28 PM时编辑过了
    Attachments:
    table example.doc ‏26 KB

    Hi yangafreet,
    There is no way I know of to create a DIAdem table that looks like the table in your Word document.
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • How i can access and edit the table of database(.mdb) file through Labview

    Dear sir,
    I want to access and edit the table of database(.mdb) file through Labview and it should save.
    please tell me how i can do it.
    i am waiting for reply.
    regards
    Rajendra

    there are options aplenty for this.  First off, do you have the database connectivity toolset?  If so, You can do it from there.  Following the examples in labview. Or you can do a search for ADO or access database, and find plenty of VIs that can do this. 
    Paul <--Always Learning!!!
    sense and simplicity.
    Browse my sample VIs?

Maybe you are looking for