How to display bullets, tick marks and boxes in the report body

Hi
I have to design a report in which there are certain instructions to be
printed at the bottom.
i have display this instructions in a bulleted form.
how do i do it.
Thanks
ameya

I received a complaint that this was a "please do my job" kind of question. While it could be seen as that, I think in this instance the poster is looking for hints, rather than being spoonfed a solution.
baditakishore - welcome to SCN. Please read and understand the Rules of Engagement.
matt

Similar Messages

How to display Sales order creater and whole modified the SO, when modified

Dear ,
I want to know a Sales order whol created it, and who modified it , which time modifed. What can I do?

Hi,
Go to VA02, then select Environment -> Changes -> Click on Additional Info .
If you want to check a particular line item , you can put the item number in the Item field.
Otherwise if you want to look at the entire order changes, then just leave it blank and click on execute.
Now double click on any of the action and you would be able to see the previous and the changed value.
Hope it helps you.
Reward points if helpful.
Regards
Ravi

How can i disable some text and item in the reports from printing

i have a requirment to prepare a report for cheque printing on a formatted cheque paper..so i want the data should be printed in the paper not the whole thing..how can i do this...
it is like this
Name:- <coming from database>
Address :-
Rs :-
in printing i need only the data not Name,Address and Rs headings..
plz help me out??

Hi,
The usual method to influence whether an item should be printed or not is to adjust the function which lies underneath the item (simply return FALSE when you don't need it. You can also adjust the input and then return TRUE). I hope this will help you to solve your problem.
Regards,
Vincent ([email protected])

Automatically populate the Vendor and tick SC Vendor box in the PO

Hello Gurus,
How can I automatically populate the Vendor and tick SC Vendor box in the delivery address tab in the Purchase order?
Thanks!

Hi
I am not sure what business process you would like to map .Is it subcontractor order or   the business would like to send the component specific address every time which is different then Vendor master address.
If this is the case then the SC vendor   should be ON. This is manual process there is no seting to update this selection automatic.
Also if the above process is repeated   process . you can do the checkbox customized in the 'Reference data, item' Field Selection Group as required field . Every time user has flag this field   before saving of PO. But this is also not correct solution it will affect all type PO.
Thanks
Dilip

How to display application server date and time?

Hi Friends,
                I am getting error when i am trying to display default date,time and client.
I have designed a screen where DATE, TIME and CLIENT are 3 fields in the screen this 3 fields i have to display defaultly date,time and client of the application server.
In the data declarations i have declared like...
DATA: DATE LIKE SY-DATUM,
           TIME LIKE SY-UZEIT,
          CLIENT LIKE SY-MANDT.
In the PBO screen source code i am writeing like...
write: 'DATE', SY-DATUM, / 'TIME', SY-UZEIT, / 'CLIENT', SY-MANDT.
But i am not able to display the output please can anyone point my mistake where i am going useful will be rewarded.
Thks

Hi Reddy,
I will tell u how to get this done .
Check all these screen shots .No work at all .
[Screen shot 1|http://bp3.blogger.com/_O5f8iAlgdNQ/R-icwCm1qvI/AAAAAAAAA9k/7gshn3AKOZ0/s1600-h/date1-715845.jpg]
[Screen shot 2.|http://bp1.blogger.com/_O5f8iAlgdNQ/R-icwim1qwI/AAAAAAAAA9s/QMtdiWyB-nY/s1600-h/date2-718517.jpg]
[Screen shot 3|http://bp2.blogger.com/_O5f8iAlgdNQ/R-icwym1qxI/AAAAAAAAA90/4GnH-bwAPEo/s1600-h/date3-719013.jpg]
There is no work at all . only onething what u have to do is, give field length 8 on the screen for Time field. thats it .
Regards,
Venkat.O

I'm wondering how to display "bullets" from the bottom to the top (last to first) in a slideshow. Can anyone help?

I'm wondering how to display "bullets" from the bottom to the top (last to first) in a slideshow. Can anyone help?

Select the set of bullets. Go to the "Build" panel of the Inspector. Choose "Build In". Choose your effect. Select "By Bullet Group" under delivery.
Be sure to experiment with the various options.

How to display planned movement date and actual movement date together?

Hi, Professionals,
My purpose is to list delayed outbound deliveries.
Anyone could tell me how to display planned movement date and actual movement date?
Appreciate your help.

Thanks Shiva.
I tried another way to do it. It works only for a short period of time.
By using VL06O, I list all outbound deliveries by limiting both planned goods movement dates and actual goods movements dates to the same week I would like to inspect. Say both from 7th/11 to 14th/11.
then I list outbound delivery list with planned goods movement date to 7th/11 but left out actual goods movements dates this time.
In excel, I compare those two lists and filter out those unique ones because those unique documents means delayed deliveries which cannot delivery according to planned date.
However, the "delayed" list generated by this method has some noises. Not all of documents are really delayed although most of them do.
I'm also looking for a way to list sales documents number of these delayed delivery documents so i can retrieve order details from it such as order value.
Help still needed.

I accidently put the same keyword in all pictures. How to back off from that and just having the right pictures marked?

I accidently put the same keyword in all pictures. How to back off from that and just having the right pictures marked?

Once more after some thinking: I have a Lightroom backup from jan 5th. It seems better to use this, but how do I do to force LR to start from the latest backup?
11 jan 2015 kl. 18:11 skrev NicHamilton <[email protected]>:
I accidently put the same keyword in all pictures. How to back off from that and just having the right pictures marked?
created by NicHamilton <https://forums.adobe.com/people/NicHamilton> in Photoshop Lightroom - View the full discussion <https://forums.adobe.com/message/7085634#7085634>
I'm not a Mac user so can't speak specifically about using Time Machine but if it is possible to get to an earlier version of the Lightroom Catalog then I would try that, yes. Backups are another way of doing this. Just make sure you make a copy of your current Catalog before replacing it with another one.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7085634#7085634 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7085634#7085634
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email <mailto:[email protected]> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 16>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Lars Magnusson
Business Evolution
+46 70 245 28 90

When i load the page on line the link appear as well as the question marks in boxes on the background

When i load my Iweb photo page on line the writen links appear as well as the question marks in boxes, on the background? what can I do for that not to appear?
Blank
Dance classes
Albums photo
Party night
Wedding
Fashion
Links
Contact
Dance
/___sbsstatic___/migration-images/migration-img-not-avail.png#0
shapeimage_4
/___sbsstatic___/migration-images/migration-img-not-avail.png#1
SS100446_2d0e4370
/___sbsstatic___/migration-images/migration-img-not-avail.png#2
SS100462_2d0b1760
/___sbsstatic___/migration-images/migration-img-not-avail.png#3
ParisRockDanceAction_23f80fe0
/___sbsstatic___/migration-images/migration-img-not-avail.png#4
ParisRockDance Action_239c6820
/___sbsstatic___/migration-images/migration-img-not-avail.png#5
DanceActionJuly_25ff0d70
Back to Index
1 2 3 4
Play Slideshow
Back to Album
Download
Play Slideshow
/___sbsstatic___/migration-images/migration-img-not-avail.png
Previous
Next
1 2 3 4

Where are you hosting your site and how are you uploading the files to it?
Publish your site to a folder on your hard drive and open it locally with your browser to see if these pages display properly or not. If the look OK then the problem lies with the uploading of the files to the server.
If the local site looks the same as the online site then the problem is more serious.
OT

SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.

Hi there,
Does someone know in SharePoint 2010 list view - How to filter on a multiline text box field - the view filter does not allow me to select it.
Thanks,

Hi，
Per my knowledge,
it is by design that the data type multiple lines of text can only use “contains” and “begins with” operators.
You can also filter the list view using SharePoint Designer,
Open your list AllItem.aspx page in SPD ->click “Filter” > in “Field Name” select your multipe line of text field, in “Comparison” will displayed four choices.
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display values in top of page in ALV report

Hai,
This is my billing report program, i developed that object by using ALV but i could not able to use Top-of-page. please any one correct my code,
*& Report ZE0232_ALV_BILLING                                          *
report ze0232_alv_billing.
type-pools: slis.
data: repid like sy-repid.
data: fieldcatalog type slis_t_fieldcat_alv,
      wa_fieldcatalog type slis_fieldcat_alv.
data : ievent type slis_t_event,
wevent type slis_alv_event.
data: sal_text like tvkot-vtext,
      DIS_TEXT LIKE TVTWT-VTEXT,
      DIV_TEXT LIKE TSPAT-VTEXT.
tables: vbrk.
data: begin of i_vbrk occurs 0,
      vbeln like vbrk-vbeln,
      fkdat like vbrk-fkdat,
      erdat like vbrk-erdat,
      kunrg like vbrk-kunrg,
      name1 like kna1-name1,
      netwr like vbrk-netwr,
      stext like tvkot-vtext,
      dtext like tvtwt-vtext,
      divtext like tspat-vtext,
      end of i_vbrk.
selection-screen begin of block billing with frame.
parameters: salesorg like vbrk-vkorg.
select-options: dischanl for vbrk-vtweg,
                division for vbrk-spart,
                bildat for vbrk-fkdat.
selection-screen end of block billing.
select vbeln fkdat erdat kunrg netwr from vbrk into corresponding fields of table i_vbrk where vkorg = salesorg
                                                                                and vtweg in dischanl
                                                                                and spart in division
                                                                                and fkdat in bildat.
select vtext from tvkot into sal_text where vkorg = salesorg and spras = 'EN'.
endselect.
select vtext from TVTWT into DIS_text where VTWEG IN dischanl and spras = 'EN'.
endselect.
select vtext from TSPAT into DIV_text where SPART IN DIVISION and spras = 'EN'.
endselect.
loop at i_vbrk.
move: sal_text to i_vbrk-stext,
        DIS_TEXT TO I_VBRK-DTEXT,
        DIV_TEXT TO I_VBRK-DIVTEXT.
modify i_vbrk.
endloop.
perform get_fieldcatalog.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
    i_callback_program                = repid
I_GRID_TITLE                      =
    i_callback_top_of_page            = 'TOPS'
    it_fieldcat                       = fieldcatalog
tables
    t_outtab                          = i_vbrk
exceptions
   program_error                     = 1
   others                            = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form GET_FIELDCATALOG
      text
<b>form tops.
write :/ 'Hai Welcome'.
endform.                    "tops</b>&----
*&      Form get_fieldcatalog
      text
form get_fieldcatalog.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-fieldname = 'VBELN'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'SALES DOCUMENT'.
WA_fieldcatalog-rollname = 'VBELN'.
wa_fieldcatalog-hotspot   = 'X'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-fieldname = 'FKDAT'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'BILL DATE'.
WA_fieldcatalog-rollname = 'VBELN'.
WA_fieldcatalog-hotspot   = 'X'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '3'.
wa_fieldcatalog-fieldname = 'ERDAT'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'CREATED DATE'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '4'.
wa_fieldcatalog-fieldname = 'KUNRG'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'CUSTOMER NO'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '5'.
wa_fieldcatalog-fieldname = 'NAME1'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'CUSTOMER NAME'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '6'.
wa_fieldcatalog-fieldname = 'NETWR'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'NET VALUE'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '7'.
wa_fieldcatalog-fieldname = 'STEXT'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'SALES ORG'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '8'.
wa_fieldcatalog-fieldname = 'DTEXT'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'DIS.CHANNEL'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
wa_fieldcatalog-col_pos = '9'.
wa_fieldcatalog-fieldname = 'DIVTEXT'.
wa_fieldcatalog-tabname   = 'I_VBAK'.
wa_fieldcatalog-seltext_m = 'DIVISION'.
append wa_fieldcatalog to fieldcatalog.
clear wa_fieldcatalog.
endform.                    "GET_FIELDCATALOG

HI see this report
you can know how to write TOP-OF_PAGE code
and insert LOGO also
*& Report ZTEST_ALV_LOGO
REPORT ztest_alv_logo.
TYPE-POOLS : slis.
*ALV Formatting tables /structures
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: gt_events   TYPE slis_t_event.
DATA: gs_layout   TYPE slis_layout_alv.
DATA: gt_page     TYPE slis_t_listheader.
DATA: gs_page     TYPE slis_listheader.
DATA: v_repid     LIKE sy-repid.
*ALV Formatting work area
DATA: w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_events   TYPE slis_alv_event.
DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
INITIALIZATION.
PERFORM build_events.
PERFORM build_page_header.
START-OF-SELECTION.
*perform build_comment.     "top_of_page - in initialization at present
SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
PERFORM build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program                = v_repid
      i_structure_name                  = 'BSID'
   i_background_id                   = 'ALV_BACKGROUND'
      i_grid_title                      = 'This is the grid title'
I_GRID_SETTINGS                   =
      is_layout                         = gs_layout
      it_fieldcat                       = gt_fieldcat[]
      it_events                         = gt_events[]
    TABLES
      t_outtab                          = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
FORM populate_for_fm USING p_row
                           p_col
                           p_fieldname
                           p_len
                           p_table
                           p_desc.
w_fieldcat-row_pos      = p_row.          "Row Position
w_fieldcat-col_pos      = p_col.          "Column Position
w_fieldcat-fieldname    = p_fieldname.    "Field name
w_fieldcat-outputlen    = p_len.          "Column Lenth
w_fieldcat-tabname      = p_table.        "Table name
w_fieldcat-reptext_ddic = p_desc.         "Field Description
w_fieldcat-input        = '1'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " populate_for_fm
*&      Form build_events
FORM build_events.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events
             WITH KEY name = slis_ev_user_command
             INTO ls_event.
IF sy-subrc = 0.
    MOVE slis_ev_user_command TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events
             WITH KEY name = slis_ev_top_of_page
             INTO ls_event.
IF sy-subrc = 0.
    MOVE slis_ev_top_of_page TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " build_events
*&      Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
FORM user_command USING r_ucomm     LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
READ TABLE gt_bsid INDEX rs_selfield-tabindex.
error checking etc.
SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDFORM.                    "user_command
*&      Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_page
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
FORM build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
w_fieldcat-edit = 'x'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " build_fieldcat
*&      Form build_page_header
      gt_page is used in top of page (ALV subroutine - NOT event)
      *H = Header, S = Selection, A = Action
FORM build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
APPEND gs_page TO gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
APPEND gs_page TO gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
APPEND gs_page TO gt_page.
ENDFORM.                    " build_page_header
<b>Reward if useful</b>

My iTunes home screen displays a lot of small boxes with the letter A in it instead of text

my iTunes home screen displays a lot of small boxes with the letter A in it instead of text

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Also, sometimes restoring the iPod helps.

Its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

its saying startup disk almost full. have no music or photos on computer. how do i clear it up and free up the HD

There are some items to the right of these reply boxes,
of them a few are likely to be of help to some extent...
Without knowing which OS X version, advice will be not specific
and to answer three different ways when one of them is correct
is a waste of time.
Is your OS X newer than Lion 10.7.5? IF so different rules apply
to finding out what is free space, where it is, & how to tell if it is.
For systems older than Lion (Snow Leopard, Leopard, Tiger, Panther)
the rules are a little different, since there would not be an Other item
on the hard disk drive which could contain items necessary to the OS
yet not detailed to the user.
And Lion 10.7 has a few hidden files that are hard to locate, and one
of them may have some bearing on the missing space of a HDD.
The items here, mostly for 10.7:
https://discussions.apple.com/message/24954432#24954432
start up disk full, other options:
https://discussions.apple.com/message/11808734#11808734
There are Support articles, you could use Help viewer in the
system, on your computer, to look for results; or use google.
However, avoid the temptation to use a badware such as cleanmymac,
mackeeper, and others that are sources of known trouble to the Mac.
Good luck & happy computing!

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash?

How can I enable FTP on the DMP and How can I FTP to it and then remove the files that were deployed to the DMP flash? My platform of DMS is 5.2.2

Hi Temur, ok. I do the above procedure and it worked fine
Now, I have other question?
How can I reproduce any file (for example: a video, an url page, an image), that is in the flash of DMP?
Índice de ftp://172.17.15.22/tmp/ftproot/tmp/ftproot/tmp/ftproot/usb_1/
Subir al directorio superior.
Nombre Tamaño Última modificación
Sample Videos.lnk
1 KB
17/06/2011
06:25:00 a.m.
deployment
29/06/2010
04:14:00 a.m.
lost+found
25/02/2010
12:00:00 a.m.
video futbol en la playa.mp4
1390 KB
29/06/2010
01:08:00 a.m.
videofutbol.mp4
1390 KB
29/06/2010
01:38:00 a.m.
I like, that el DMP when loss conectivity with DMM, It display at the LCD screen, the video named videofutbol.mp4, this video As I show in the picture above, already in the flash of DMP.
I appreciate your early response.
Thanks

HT1695 I know nothing about how to use my new ipod and when reading the little bit of information in the folder that came with it, all I can do is turn it on, but it just powers down after a few seconds. How do I work this thing?

I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this thing going?

You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5

How to display bullets, tick marks and boxes in the report body

Similar Messages

Maybe you are looking for