How to display clear screenshots in PDF when default Acrobat page resolution is 110 ppi?

I want screenshots captured on my 96 ppi screen to display clearly in the PDF. But the Acrobat default page resolution display is configured to 110 ppi, not to the system setting of 96 ppi.
1) Why is the Acrobat default display 110 ppi and not 96 ppi?
2) If all Adobe Acrobat and Reader users open PDFs with the default Acrobat setting, how should screenshots taken on a 96 ppi screen be resized to display clearly?
Thanks

The concept of matching pixels in a bitmap photo to the user's display doesn't exist in PDF. Pages have physical dimensions, not pixel values, so they will always end up being resampled.

Similar Messages

  • How to display masked links in PDF when printing?

    Hello
    I have several PDF's which contain hyperlinks masked behind words. I would give readers of this document to print out the PDF. However, as the links are masked they wouldnt be able to use the document in print form. Is there any way to have these links shown when printing?
    thanks

    Hello there,
    Thanks for posting. Unfortunately, I'm afraid you're in the wrong forum; this is the forum for questions specific to Acrobat.com (www.acrobat.com), and we are not able to help with questions about other Adobe products and services. If you're using Adobe Reader free software, I recommend posting to the Reader forum, where your questions is more likely to get a helpful response:
    http://forums.adobe.com/community/adobe_reader_forums
    Sorry not to be of more help! Good luck.
    Best,
    Rebecca

  • How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID

    Hy experts
    How to display a fixed number of rows in a page when using CL_GUI_ALV_GRID?? lets say 500 ?? because my display table it may contain in some cases 10.000 and evidently I can t see all of them..
    I have a button in my toolbar witch triggers this event
    (display 500 records ) but I don t have the logic to do this only with methods of CL_GUI_ALV_GRID.
    can you tell me a standard method of CL_GUI_ALV_GRID witch can help me do this?? any hint will be good..
    Till now I was used to add a column to my structure witch represents a flag that is a number corresponding to every 500 records (a batch containing 500 records )
    first       500 - flag -> 1
    second  500 - flag -> 2
    etc..but I m convinced that exists a way of doing this more easy..without damaging my structure..
    thanx in advance..don t be shy..reply if you have any hints..

    Hi,
    if method SET_FILTER_CRITERIA doesn´t help, I think that you must work with 2 internal tables, a counter and a loop for filtering the records to be displayed:
    case counter.
      when 1.
         loop at int_table1 from 1 to 500.      "<-- your table with all records
           move int_table1 to int_table2
        endloop.
      when 2.
         loop at int_table1 from 501 to 1000.     
           move int_table1 to int_table2
        endloop.
    etc, etc.
    Call grid-->SET_TABLE_FOR_FIRST_DISPLAY
       exporting
         IT_OUTTAB = int_table2                "<-- instead of your currently table int_table1

  • How do i clear off my desktop when i accidentally put all my music on it?

    how do i clear off my desktop when i accidentally put all my music on it?

    Drag the files off normally, or if the Finder is locked up, click here and follow the instructions.
    (60782)

  • How to improve quality of pdfs when exporting from pages?

    how to improve quality of pdfs when exporting from pages? Any suggestions?

    Print to pdf and don't use anything with transparency.
    Have you ensured all your images are actually high enough resolution for whatever purpose (which you haven't said) you want?
    Peter

  • How can I keep my old PDF when I transfer another PDFs documents

    ASAP.        How can I keep my old PDF when I transfer another PDFs documents

    Make sure they have different filenames and you should see them both in iTunes when you have imported them

  • How do I save as a pdf while in acrobat cloud?  the "save as" function only lets me save as a complete webpage or html

    how do I save as a pdf while in acrobat cloud?  the "save as" function only lets me save as a complete webpage or html

    What application are you using?
    Acrobat's Save As has 21 choices available.
    Be well...

  • How can I convert text to PDF in the new "Pages" without losing info.

    How can I convert text to PDF in the new "Pages" without losing a lot if information?

    Select Export To from Pages' File menu, then select PDF from the sub-menu.

  • How to display link content on the the same sharepoint page on click event

    "How to display link content on the the same sharepoint page on click event"
    Detail:
    we are using a document library where all html files are stored/uploaded.  we would like to display/open the html file on the same sharepoint page where all the files are listed.
    Thanks.

    Use jQuery and set the target to self to the anchor tag
    Regards,
    Sairam Avacorp Technologies

  • How do I overcome error message 1612 when updating acrobat 8 standard ?

    How do I overcome error message 1612 when updating acrobat 8 standard ?  Kent

    Moving this discussion to the Acrobat Installation & Update issues forum.
    [email protected] you may want to review the steps listed in Error 1714 | Acrobat, Reader - http://helpx.adobe.com/acrobat/kb/error-1714-acrobat-reader.html as it does reference the 1612 error.

  • Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF by default, not the top. How do you change this?

    Preview: In a group of PDF files in the same window, going to the next or a previous PDF file displays the bottom of PDF page by default, not the top of the PDF page. How do you change this? In Mac OS 10.9 and previous, going to the next or previous PDF file displays the top of the PDF by default. Is there a way to change this back? When I go to the next or previous PDF file, I want to first view the top of the page, not the bottom. This really doesn't make any sense. Any help? Thanks!
    MacBook Air (13-inch, Mid 2012)
    2 GHz Intel Core i7
    8 GB 1600 MHz DDR3
    500 GB Flash Storage
    Preview Version 8.0 (859)
    Mac OS 10.10.1

    That to me seems like a bug in Yosemite.
    Apple Feedback http://www.apple.com/feedback/
    Bug Reporter https://bugreport.apple.com/

  • How to display the data in PDF format

    hi all,
    i will give input in my selection screen and i will execute my report then it has to display data in PDF file in some directory (like c or d directory). i refered existingthreads . most of then saying using spool req we can download pdf file i.e. not my requirement. my requirement is when i click on execute button it has to display the data in pdf file with headings.
    Anybody can send me the sample code please.
    thanks,
    maheedhar

    Hi Easwar,
    i am sending my code. in this one records is splitting into 2 records.
    report zmaheedhar.
    maheedhar-start
    TABLES : vbak.
    parameters : p_vbeln type vbak-vbeln.
    data : begin of itab occurs 0,
            vbeln type vbak-vbeln,
            ERDAT type vbak-erdat,
            ERZET type vbak-erzet,
            ERNAM type vbak-ernam,
            ANGDT type vbak-angdt,
            BNDDT type vbak-bnddt,
            AUDAT type vbak-audat,
            VBTYP type vbak-vbtyp,
            TRVOG type vbak-trvog,
            AUART type vbak-auart,
            AUGRU type vbak-augru,
            GWLDT type vbak-gwldt,
            SUBMI type vbak-submi,
            LIFSK type vbak-lifsk,
            FAKSK type vbak-faksk,
            NETWR type vbak-netwr,
            WAERK type vbak-waerk,
            VKORG type vbak-vkorg,
           end of itab.
    maheedhar-end
    DATA: pripar TYPE pri_params,
          arcpar TYPE arc_params,
          lay TYPE pri_params-paart,
          lines TYPE pri_params-linct,
          rows TYPE pri_params-linsz.
    DATA: val(1), val1(1).
    *---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
    DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
    DATA: name TYPE pri_params-plist VALUE 'Testing'.
    DATA: i_pdf TYPE STANDARD TABLE OF tline.
    DATA: spono TYPE tsp01-rqident.
    maheedhar-start
    top-of-page.
    write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
           'Date','Document Date','SD document category','Transaction group','Sales Document Type',
           'Order reason'.
    start-OF-SELECTION.
          select vbeln  ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
                  VBTYP  TRVOG AUART AUGRU GWLDT SUBMI LIFSK
                  FAKSK  NETWR WAERK VKORG from vbak
            into table itab
            where vbeln = p_vbeln.
    maheedhar-end
    --- Retreive local printer details
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        destination            = dest
        no_dialog              = 'X'
        immediately            = ' '
      IMPORTING
        out_archive_parameters = arcpar
        out_parameters         = pripar
        valid                  = val
        valid_for_spool_creation = val1
      EXCEPTIONS
        archive_info_not_found = 1
        invalid_print_params   = 2
        invalid_archive_params = 3
        OTHERS                 = 4.
    IF sy-subrc NE 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
      WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    *-- Set Spool printer details w.r.t local printer
    pripar-prdsn = 'DSN'.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
      EXPORTING
        in_archive_parameters    = arcpar
        in_parameters            = pripar
        no_dialog                = 'X'
        list_name                = name
      IMPORTING
        out_archive_parameters   = arcpar
        out_parameters           = pripar
        valid                    = val
        valid_for_spool_creation = val1
      EXCEPTIONS
        archive_info_not_found   = 1
        invalid_print_params     = 2
        invalid_archive_params   = 3
        OTHERS                   = 4.
    IF sy-subrc EQ 0.
    ---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
      NEW-PAGE PRINT ON
      NEW-SECTION
      PARAMETERS pripar
      ARCHIVE PARAMETERS arcpar
      NO DIALOG.
    ELSE.
      WRITE:/ 'Unable to create spool'.
    ENDIF.
    *--- Output statements
    *WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
    *WRITE:/ 'Second Line'.
    LOOP at itab.
    write: itab-vbeln,
            itab-ERDAT,
            itab-ERZET,
            itab-ERNAM,
            itab-ANGDT,
            itab-BNDDT,
            itab-AUDAT,
            itab-VBTYP.
    ENDLOOP.
    "---> Close spool
    NEW-PAGE PRINT OFF.
    spono = sy-spono.
    Convert ABAP Spool to PDF
    CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
      EXPORTING
        src_spoolid                    = spono
        no_dialog                      = 'X'
    TABLES
       pdf                            = i_pdf
    EXCEPTIONS
       err_no_abap_spooljob           = 1
       err_no_spooljob                = 2
       err_no_permission              = 3
       err_conv_not_possible          = 4
       err_bad_destdevice             = 5
       user_cancelled                 = 6
       err_spoolerror                 = 7
       err_temseerror                 = 8
       err_btcjob_open_failed         = 9
       err_btcjob_submit_failed       = 10
       err_btcjob_close_failed        = 11
       OTHERS                         = 12.
    Download PDF contents to presentation server
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                        = 'c:\test.pdf'
        filetype                        = 'BIN'
      TABLES
        data_tab                        = i_pdf
    EXCEPTIONS
       file_write_error                = 1
       no_batch                        = 2
       gui_refuse_filetransfer         = 3
       invalid_type                    = 4
       no_authority                    = 5
       unknown_error                   = 6
       header_not_allowed              = 7
       separator_not_allowed           = 8
       filesize_not_allowed            = 9
       header_too_long                 = 10
       dp_error_create                 = 11
       dp_error_send                   = 12
       dp_error_write                  = 13
       unknown_dp_error                = 14
       access_denied                   = 15
       dp_out_of_memory                = 16
       disk_full                       = 17
       dp_timeout                      = 18
       file_not_found                  = 19
       dataprovider_exception          = 20
       control_flush_error             = 21
       OTHERS                          = 22.
    thanks,
    maheedhar

  • How to display Cleared/open item symbol' in alv?

    Hi Experts,
                 I am developing ALV report like faglb03,additionaly including some fields as per user requirement.here i want to display " Cleared/open item symbol' in alv.Can anyone tel me how to do this.In which and how it is stored in table?
    Thanks in Advance!

    [Formatting Column Contents|http://help.sap.com/saphelp_nw04/helpdata/en/ff/4649a6f17411d2b486006094192fe3/frameset.htm]
    check the documentation for ICON , check the table ICON for more symbols
    [Sample code of alv list|http://www.sap-img.com/abap/regarding-icon-display-in-alv.htm]]

  • How to display employee photo in pdf through WebDynpro OR ABAP print Progr?

    hi,
    I have uploaded employee photos using TCODE OAOH. Now all the employee photos are stored in Archive link.
    Now my requirement is i have get the employee photo and display it in PDF using PDF forms and  webdynpro OR using ABAP print program.
    I am able to get the employee photo from SAP archive link using ABAP code. After this i have to upload this to MIME reository. From MIME repository i have to display it in PDF forms from WEbDynpro.
    I tried with ABAP print program, directly calling the PDF form in program and display the employee data with Employee Photo. With my program i am able to see only employee data. But it's not displaying employee Photo.
    Plz any helps to display employee photo in PDF forms using either webdynpro OR ABAP printprogram.
    If ur reply is related to WebDynpro, pla tel me how to upload photo to MIME repository From Archive Link.
    Since all the employee photos are uploaded into Archive link using Tcode OAOH. From this i have to get the employee photo and upload it to MIME repository and i have to display it in PDF forms.
    Any help are appreciated.......
    Regards,
    Shankar.

    Hi Sankar,
    1)You can use the program BSP_UPDATE_MIMEREPOS to upload the photos in the mime repository.
    2)Use the following code to get the content from your mime and set the content to your interactive UI element as Xstring format.
        data:
        mime_repository type ref to if_mr_api,
        content type xstring,
        url type string value '/SAP/BC/BSP/SAP/myBSPapplication/rajkumar.jpg'  .
      mime_repository = cl_mime_repository_api=>get_api( ).
      call method mime_repository->get
        exporting
          i_url     = url
        importing
          e_content = content.
      wd_context->set_attribute( name = 'DATAS' value = content ).
    Thanks,
    Rajkumar.S

  • How do i clear the past numbers when i send a message?

    When i try to send a message to someone, it still show the past numbers. How can i clear that on my iphone 4s?

    The only way to clear the Messages cache is to restore the phone as new (not from back up). Or, wait until they're overwritten in time.

Maybe you are looking for