How to display data collected in main vi to indicators in another vi
Hi,
I am collecting data using NI 6251 USB DAQ
in the main vi but as i have too many controls and indicators on the
main vi front panel. so i want to display the indicators(graphs) in another vi. i also
want the vi with the graphs to open automatically. Does any one know how
i can do this? I would
really appreciate any help.
Thanks,
ygupta
Solved!
Go to Solution.
Hi,
Search forum for the sub vi concept.
For your reference i have attached a example.
you can see procedure for the same on the net.
regards,
Shrek
Attachments:
graph.zip 11 KB
Similar Messages
-
How to display data from a recordset based on data from another recordset
How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
> -
Hi all,
can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
Thanks & Regards,
NaveenDATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
TYPES: BEGIN OF TY_PFTAB,
RATEGROUP TYPE /BIC/OIWRATEGRP,
LEVEL TYPE /BIC/OIWPCSLEVEL,
FROMDATE TYPE /BI0/OIDATEFROM,
FROMTO TYPE /BI0/OIDATETO,
STANDARD TYPE /BIC/OIWSTRATE,
OVERHEAD1 TYPE /BIC/OIWOHRTE1,
OVERHEAD2 TYPE /BIC/OIWOHRTE2,
OVERHEAD3 TYPE /BIC/OIWOHRTE3,
EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
END OF TY_PFTAB.
DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
WA_PFTAB TYPE TY_PFTAB.
SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
*TYPES : BEGIN OF TY_EXCEPTION,
EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
END OF TY_EXCEPTION.
*DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
WA_EXTABLE TYPE IT_EXTABLE.
*SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
get element via lead selection
lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
@TODO handle not set lead selection
IF lo_el_professionaltable IS INITIAL.
ENDIF.
get all declared attributes
lo_el_professionaltable->get_static_attributes(
IMPORTING
static_attributes = ls_professionaltable ).
lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ). -
How to display data elements in the tempalte header
Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AMHi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply -
How to display Date Calendar in Oracle BI Answers Prompts (parameter)
I'm still new to OBIEE.
How to display Date Calendar in Oracle BI Answers Prompts (parameter)?
Thanks.Hi,
While creating Dash Board prompt choose the control to 'Calendar'.
I think it is not possible to provide 'Calendar' control using Prompts tab while creating request.
It is possible to write Java Script for a Column of data type 'char'. So, cast the date data type to char.
Go to: Column Properties --> Data Format
Choose override default data format to view the available options in the drop down list.
I would be very happy if anybody acknowledge me that I am wrong.
-Vency -
How to display data depend upon ListBox value?
Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
RaghuSimply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan -
How to display date and time on jsf page
Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain. -
How to perform Data Collection on single SFC with QTY = 1 with material lot size 1?
Dear experts,
We are working with SFC qty>1 on a relaxed routing. At a given operation we want to collect the data on single quantity; i.e. SFC qty on that operation, where the collection will happen, will be 1.The corresponding material lot size is for ex 10. The operator must be able to collect data on SFC with qty=1 multiple times until the quantities will be consumed. He must be also able to collect other values on the remaining quantities on the same operation with the same DC group or other DC groups. How many times the data must be collected is dependent on the shop order build quantity. The data may be collected several time but not more than the build qty. In other words some specific data will be collected on a qty of a product while others will be collected against remaining quantity. The data collection must be also done in a serialized manner.
Here's what we have set up so far:
1) 3 DC groups, each DC group has 3 data fields.
2) Each data field has the following restrictions: Required Data Entries = 0 and Optional Data Entries = 1
3) All DC groups are attached on the same combination of operation\material\routing
4) we are using relaxed routing
Process description:
The operator must be able to collect any data field on single product. For that he will enter the operation where the data collect are attached, he will enter the SFC with qty=1 then he will run the data collection after selecting the appropriate DC Group and entering the needed information. The operator will complete the SFC with qty=1.
The operator will pick the next product, select the same SFC and enter qty 1 and collect other value against this product.
Problem is:
Once the first collection is done on a given SFC with entered qty=1, the system is not allowing the operator to do further collects on the same SFC with qty=1 or any other quantity. He cannot select any DC group from the DC group list. We tried also with the table selection menu on the DC Group list but nothing can be selected.
So we tried to play around with the DC group definitions as follows:
A) we set Required Data Entries = 0 and Optional Data Entries = 10. Still the operator was not able to select any DC group after collecting data the first time. We tried to reopen the pod and list again. But we get the same blocking behavior.
B) we set Required Data Entries = 10 and Optional Data Entries = 1. The operator was able to select the DC group after collecting data the first time. BUT operator must enter the data fields 10 times on one SFC quantity, which is not what we want. Besides again he cannot collect other information on remaining quantities on the same operation.
C) There's an option to serialize the SFC before reaching the operation where the collection is happening, then merging ofter complete. Automation is needed here; hence customization. We are highly avoiding customization now, since we expect the data collect to work well on single quantities even when the main SFC has qty>1
Questions:
1) Are we missing any kind of further configuration\setup?
2) Or the current system design does not allow collecting data on single quantities of an SFC which main quantity is greater than 1?
3) Looking at this link Approaches to Collection of Data - SAP Manufacturing Execution (SAP ME) - SAP Library, there's nothing mentioned about same SFC number with multiple quantities!!!
We are using SAP ME 15.0.3.0.
Thanks in advance for your help
AliAli
to collect data for the same SFC multiple times, your system rule "Allow Multiple Data Collection" needs to be set to true for the site.
Stuart -
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" >
<mx:Script>
<![CDATA[
import mx.controls.*;
import mx.collections.*;
import flash.events.*;
import mx.collections.ArrayCollection
[Bindable]
private var records:Array=new Array();
[Bindable]
private var datarecords:ArrayCollection=new ArrayCollection();
private var xmldata:String="<?xml version=\"1.0\"?>\r\n<dataset>\r\n";
private var fileref:FileReference=new FileReference();;
private function readExcel():void
var request:URLRequest=new URLRequest();
request.url="data/chart.csv";
var loader:URLLoader=new URLLoader();
loader.dataFormat=URLLoaderDataFormat.TEXT;
loader.addEventListener(Event.COMPLETE,eventComplete);
loader.addEventListener(IOErrorEvent.IO_ERROR,onIOError);
loader.load(request);
private function eventComplete(event:Event):void
var loader:URLLoader=URLLoader(event.target);
var record:Array=new Array();
var fields:Array=new Array();
var obj:Object;
var str:String=new String();
loader.dataFormat=URLLoaderDataFormat.TEXT;
var result:String=new String(loader.data);
record=result.split("\r\n");
for(var i:int=1;i<record.length;i++)
obj=new Object();
fields=record[i].split(",");
/* obj.col1="Timestamp: "+fields[0];
obj.col2="EndDevice-PaLnaMode: "+fields[1];
obj.col3="Wap-PaLnaMode: "+fields[2];
obj.col4="DownstreamLqi: "+fields[3];
obj.col5="UpstreamLqi: "+fields[4]; */
obj.col1="<Timestamp>"+fields[0]+"</Timestamp>";
xmldata+=obj.col1+"\r\n";
obj.col2="<EndDevice-PaLnaMode>"+fields[1]+"</EndDevice-PaLnaMode>";
xmldata+=obj.col2+"\r\n";;
obj.col3="<Wap-PaLnaMode>"+fields[2]+"</Wap-PaLnaMode>";
xmldata+=obj.col3+"\r\n";
obj.col4="<DownstreamLqi>"+fields[3]+"</DownstreamLqi>";
xmldata+=obj.col4+"\r\n";;
obj.col5="<UpstreamLqi>"+fields[4]+"</UpstreamLqi>";
records.push(obj);
datarecords.addItem(obj);
xmldata+="</dataset>";
datagrid.dataProvider=records;
linechart1.dataProvider=records;
private function onIOError(event:Event):void
Alert.show("I/O error"+event.type);
private function saveXML():void
fileref.save(xmldata,"xmldata.xml");
//fileref.save(xmldata,"NewFileName.txt");
private function dispData():void
fileContents_txt.text=xmldata;
]]>
</mx:Script>
<mx:DataGrid id="datagrid" x="19" y="76" width="528" height="242">
<mx:columns>
<mx:DataGridColumn headerText="Timestamp" dataField="col1"/>
<mx:DataGridColumn headerText="DevicePaLnaMode" dataField="col2"/>
<mx:DataGridColumn headerText="Wap-PaLnaMode" dataField="col3"/>
<mx:DataGridColumn headerText="DownstreamLqi" dataField="col4"/>
<mx:DataGridColumn headerText="UpstreamLqi" dataField="col5"/>
</mx:columns>
</mx:DataGrid>
<mx:Button x="126" y="32" label="read" click="readExcel()"/>
<mx:Button x="240" y="32" label="display data" click="dispData();"/>
<mx:Text id="fileContents_txt" x="10" y="326"/>
<!-- Define custom Strokes. -->
<mx:Stroke id = "s1" color="blue" weight="2"/>
<mx:LineChart id="linechart1" height="286" width="385"
paddingLeft="5" paddingRight="5"
showDataTips="true" dataProvider="{datarecords}" x="566" y="32">
<mx:horizontalAxis>
<mx:CategoryAxis categoryField="Timestamp"/>
</mx:horizontalAxis>
<mx:series>
<mx:LineSeries yField="Timestamp" xField="UpstreamLqi" interpolateValues="true" form="curve" displayName="Timestamp" lineStroke="{s1}"/>
</mx:series>
</mx:LineChart>
<mx:Button x="406" y="32" label="SaveXML" click="saveXML()"/>
</mx:Application>Um, wrong forum.
I think you want to ask this question in the Flex forum. -
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
How to display data in Table control?
Hi Experts,
Can anyone please explain me how to display the data from two different tables(those two table is related with 1 field) into a single table control?
For Example: T1 has fields (F1,F2) and
T2 has fields (F3,F4) --> here F3 is foreign key for F1
I need to display the data F1,F2,F3,F4 into the table control.
Can anyone explain me?
Thanks in Advance,
Regards,
RaghuHi,
If F3 is foreign key for F1, then both fields will have same values. Then why do you need to display both F1 and F3? Either one of them is enough. Try the following code.
types: begin of t_table,
F1 type T1-F1,
F2 type T1-F2,
F4 type T2-F4,
end of t_table.
data: i_table type standard table of t_table with header line.
select F1 F2 F4 into table i_table from T1 inner join T2 on T1F1 = T2F3.
You should create three columns in the table control with names i_table-F1, i_table-F2, i_table-F3.
After populating the internal table, refresh the control with the following statement.
REFRESH CONTROL <NAME> FROM SCREEN <SCREEN_NO>.
All the above statements should be in your PBO Module.
Regards,
Hema
Message was edited by:
Sorry, Declarations can be in the common include. Select statement and refresh statement should be in PBO.
Hema Nagarajan -
How to display data in table *urgent*
//this is the latest code that i have in client app:
try{
InitialContext initialContext = new InitialContext();
Object objref = initialContext.lookup("ejb/CustomerController");
customerControllerHome = (CustomerControllerHome) PortableRemoteObject.narrow(objref, CustomerControllerHome.class);
CustomerControllerHome home = this.getHome();
Collection c = home.findAllCustomers(custName);
// how to display the objects into the table
}catch (Exception e){
e.printStackTrace();
// did i do this wrongly ??
//home interface
public Collection findAllCustomers(String custName)
throws FinderException, RemoteException;
//session bean
public Collection findAllCustomers(String custName)throws FinderException{
System.out.println("CustomerBean findAllCustomers");
Collection cust;
CustomerDetails custDetails;
try{
cust = selectAllCust(custName);
Iterator i = cust.iterator();
while (i.hasNext()) {
Customer c = (Customer) i.next();
CustomerDetails cd = c.getDetails();
} catch(Exception fe){
throw new EJBException ("findAllCustomers " + fe.getMessage());
return cust;
private Collection selectAllCust(String custName) throws SQLException{
System.out.println("CustomerBean SelectByAllCustomers");
makeConnection();
String selectStatement = "Select * FROM customer ";
PreparedStatement prepStmt =
con.prepareStatement(selectStatement);
prepStmt.setString(1, custName);
prepStmt.setString(2, custPhoneNo);
prepStmt.setString(3, custEmail);
ResultSet rs = prepStmt.executeQuery();
ArrayList a = new ArrayList();
while (rs.next()) {
a.add(rs.getString(1));
a.add(rs.getString(2));
a.add(rs.getString(3));
prepStmt.close();
releaseConnection();
return a;
can anybody provide some example code or tutorial.
thank you very much ! =)i am developing a three tier application
client application (GUI suses Swing )
application server
database server -
How to display data on PublishingWebControls RichHtmlField ?
Hello,
I have placed sharepoint control as below on application page :
<PublishingWebControls:RichHtmlField FieldName="MultilineRichText" id="multilinetext" runat="server"/>
I have fetched sharepoint list data pro grammatically, however I do not know how can I display it on publishing web control !!
Would you please let me know the syntax for the same ?
Thanks and Regards,
Dipti ChhatrapatiHi Subhash, Thank you for your time and look at this thread !
I have treid to add the propeties you mentioned but it has thrown below error message:
Type 'Microsoft.SharePoint.Publishing.WebControls.RichHtmlField' does not have a public property named RichText
Type 'Microsoft.SharePoint.Publishing.WebControls.RichHtmlField' does not have a public property named RichTextMode
Also, programmatically I need to display data from below item to above publishing control :
SPListItem itemAnnouncement = list.GetItemById(listItemId);
Kindly let me know the rest of the syntax to display data and solution to resolve above error.
Thanks and Regards,
Dipti Chhatrapati -
How to display data in canvas which is fetched from servlet to midlet.
I am able to display data from database using servlet.
I am using MySQL as database.
But i want to display it more nicely using canvas. Right now i just print all the data's , it doent look professional.
I want to know how to show those data's nicely. How to use canvas? where i can use canvas? Is there any other way to display data/records so that it looks more professional.
Need help as soon as possible.
Thanks in advance.hey listen i created midlet and servlet. I can see the record which is on my database but as i have just printed using servlet on the mobile screen. Now i want to display those records nore nicely that is . say for example
i am showing personal profile of a user.
I am just displaying like ---"Name:" Abc,
Age: 27 etc
now i wnat to bold "Name" , "Age" stuff like that.
I want to use color etc but i dont know how to do that. How can i my records look good?
I have stored all the record in resultset and have passed it to midlet not i want display it more nicely. How to do that? -
How to display dates on which the field of an infotype is changed
there are two fields in an infotype and both the fields are changed on different dates then how to display those dates on which the two fields are changed
Hi ankit,
If you want the change log for one infotype with one two fields, then write one custom program with following logic. If you want the log for multiple infotypes for multiple fileds then you have to use that program 'RPUAUD00'. Read the documentation of the program to check how to use it.
select * from pa0000 into table it_pa0000
where pernr = v_pernr.
sort it_pa0000 by begda descending.
loop at it_pa0000 into wa_pa0000.
write your own logic to compare the previous record PERSG with current record PERSG.
if this doesnt match then get the Changed DATE from AEDTM field.
wa_pa0000-AEDTM = changed date.
Else.
continue with loop.
exit.
endloop.
regards,
Shrinivas
Maybe you are looking for
-
How do I sync my Adobe Reader files from my smartphone to my laptop?
I have some e-books and files on my Adobe Reader app through my phone, but I also want to read them on my laptop by logging on to Adobe.com. How can I sync these files from one place to another?
-
Hi All I've been trying to trudge my way through an issue our client is having but I'm getting nowhere fast. This issue was discovered when searching for why users at our second site were experiencing slow logons every morning (5-10minutes to login).
-
Replace fan w/ better heatsink? G4Ti4200 VTD64
I have a G4-Ti4200-VTD64 display board. I'm in the process of silencing my PC -- just installed quiet Papst case fans (1 in, 2 out, using rubber mounts), Nexus NX-3500 quiet power supply, and Nexus AXP-3200 quiet AMD heat-sink and fan. Forgot to or
-
Need to use progress bar in my application
hello friends, Actually i m using jsp filedownload and I am gettting my file in byte array and need to implement a progress bar while downloading file (as IE showing in status bar downloading file size ..% of total file size)...no fake progress bars
-
Third party extraction -oracle .
<i>Hi; I have to extract data from legacy system -oracle. Can someone send me the documents of configuration and data extraction. This is first time I have to extract data from legacy system .....I know bit and pieces of data extraction but want mor