How to display data in ODS?
Hi Friends,
I have a very basic question that how to see the data in ODS. Like in case of infocube we have a transaction code called "LISTCUBE" to see the data in infocube. is there any similar Tcode for ODS too?
Thanks,
manmit
Shri,
ODS contains 3 tables which table data you want to see...
acive table data:
1.SE11
2. LISTCUBE
3. ODS> Manage scren> Contents--> Display Active table data push button
change log & New table:
1. SE11
2. ODS> Manage scren> Contents--> Display New table data/ Changelog table data push button
all the best.
Reagrds,
Nagesh Ganisetti.
Similar Messages
-
How to extract data from ODS to non-SAP system
Hi,
Can anybody tell me, step by step, how to extract data from ODS to a non-SAP system?
Is it possible to do it without programming effort? And is there volume limits for this kind of extraction?
The non-SAP system is an unix system.
Thanks in advance
EllaElla,
You can look at it from the concept of a BADI / Infospoke
Extract the data from the ODS to a Flat file / RDBMS using an infospoke. I am not sure as to how the infospoke loads data into the RDBMS ( did it very long ago ) but then you can push it into an RDBMS and I am sure it will be system neutral.
Hope this helps...
Arun
Assign points if it helps -
How to display data from a recordset based on data from another recordset
How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
> -
Hi all,
can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
Thanks & Regards,
NaveenDATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
TYPES: BEGIN OF TY_PFTAB,
RATEGROUP TYPE /BIC/OIWRATEGRP,
LEVEL TYPE /BIC/OIWPCSLEVEL,
FROMDATE TYPE /BI0/OIDATEFROM,
FROMTO TYPE /BI0/OIDATETO,
STANDARD TYPE /BIC/OIWSTRATE,
OVERHEAD1 TYPE /BIC/OIWOHRTE1,
OVERHEAD2 TYPE /BIC/OIWOHRTE2,
OVERHEAD3 TYPE /BIC/OIWOHRTE3,
EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
END OF TY_PFTAB.
DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
WA_PFTAB TYPE TY_PFTAB.
SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
*TYPES : BEGIN OF TY_EXCEPTION,
EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
END OF TY_EXCEPTION.
*DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
WA_EXTABLE TYPE IT_EXTABLE.
*SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
get element via lead selection
lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
@TODO handle not set lead selection
IF lo_el_professionaltable IS INITIAL.
ENDIF.
get all declared attributes
lo_el_professionaltable->get_static_attributes(
IMPORTING
static_attributes = ls_professionaltable ).
lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ). -
How to display data elements in the tempalte header
Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AMHi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply -
How to display Date Calendar in Oracle BI Answers Prompts (parameter)
I'm still new to OBIEE.
How to display Date Calendar in Oracle BI Answers Prompts (parameter)?
Thanks.Hi,
While creating Dash Board prompt choose the control to 'Calendar'.
I think it is not possible to provide 'Calendar' control using Prompts tab while creating request.
It is possible to write Java Script for a Column of data type 'char'. So, cast the date data type to char.
Go to: Column Properties --> Data Format
Choose override default data format to view the available options in the drop down list.
I would be very happy if anybody acknowledge me that I am wrong.
-Vency -
How to display data depend upon ListBox value?
Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
RaghuSimply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan -
How to display date and time on jsf page
Hi,
how to display date and time on jsf page
we are using 11.2.0.0 jdeveloper on windows.
thanks
Edited by: user12187801 on 26-Jul-2012 01:42Your question is certainly lacking some information.
If you want a constantly updating date/time - then JavaScript is your best bet, and Google would find you examples like [url http://www.webestools.com/scripts_tutorials-code-source-7-display-date-and-time-in-javascript-real-time-clock-javascript-date-time.html]this
If you meant something else, then it's back to you to explain. -
Authorization issue when I display data from ODS, Infocube, Multirprovider
Hi Experts,
When I'm trying to display data for ODS, Infocube, Multiprovider, Infoset in production system, facing aurhorization issue.
Can anybody have idea what is authorization objects to display data from Infoproviders.
SIRICheck for below authoriztions in your role:
S_RS_ICUBE
ACTVT 03
RSICUBEOBJ AGGREGATE, CHAVLREL, DATA, DATASLICE, DEFINITION, EXPORTISRC, UPDATERULE
RSINFOAREA *
RSINFOCUBE <your cubes>
S_RS_ODSO
ACTVT 03
RSINFOAREA *
RSODSOBJ <your DSOs>
RSODSPART DATA, DEFINITION -
How to display data with the same text and key in the drop down list?
Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST,
c(20) type c.
* c = 'select any'.
data:begin of itab occurs 0,
kunnr like kna1-kunnr,
name1 like kna1-name1,
end of itab.
data:begin of jtab occurs 0,
kunnr like kna1-kunnr,
land1 like kna1-land1,
end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'. "---> Data for key is the same with text
VALUE-TEXT = 'Name'. "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AMshawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
> LIST TYPE VRM_VALUES,
> VALUE LIKE LINE OF LIST,
> c(20) type c.
>
> * c = 'select any'.
>
> data:begin of itab occurs 0,
> kunnr like kna1-kunnr,
> name1 like kna1-name1,
> end of itab.
>
> data:begin of jtab occurs 0,
> kunnr like kna1-kunnr,
> land1 like kna1-land1,
> end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
> default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'. "---> Data for key is the same with text
> VALUE-TEXT = 'Name'. "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh. -
How to display data in Table control?
Hi Experts,
Can anyone please explain me how to display the data from two different tables(those two table is related with 1 field) into a single table control?
For Example: T1 has fields (F1,F2) and
T2 has fields (F3,F4) --> here F3 is foreign key for F1
I need to display the data F1,F2,F3,F4 into the table control.
Can anyone explain me?
Thanks in Advance,
Regards,
RaghuHi,
If F3 is foreign key for F1, then both fields will have same values. Then why do you need to display both F1 and F3? Either one of them is enough. Try the following code.
types: begin of t_table,
F1 type T1-F1,
F2 type T1-F2,
F4 type T2-F4,
end of t_table.
data: i_table type standard table of t_table with header line.
select F1 F2 F4 into table i_table from T1 inner join T2 on T1F1 = T2F3.
You should create three columns in the table control with names i_table-F1, i_table-F2, i_table-F3.
After populating the internal table, refresh the control with the following statement.
REFRESH CONTROL <NAME> FROM SCREEN <SCREEN_NO>.
All the above statements should be in your PBO Module.
Regards,
Hema
Message was edited by:
Sorry, Declarations can be in the common include. Select statement and refresh statement should be in PBO.
Hema Nagarajan -
How to display data on PublishingWebControls RichHtmlField ?
Hello,
I have placed sharepoint control as below on application page :
<PublishingWebControls:RichHtmlField FieldName="MultilineRichText" id="multilinetext" runat="server"/>
I have fetched sharepoint list data pro grammatically, however I do not know how can I display it on publishing web control !!
Would you please let me know the syntax for the same ?
Thanks and Regards,
Dipti ChhatrapatiHi Subhash, Thank you for your time and look at this thread !
I have treid to add the propeties you mentioned but it has thrown below error message:
Type 'Microsoft.SharePoint.Publishing.WebControls.RichHtmlField' does not have a public property named RichText
Type 'Microsoft.SharePoint.Publishing.WebControls.RichHtmlField' does not have a public property named RichTextMode
Also, programmatically I need to display data from below item to above publishing control :
SPListItem itemAnnouncement = list.GetItemById(listItemId);
Kindly let me know the rest of the syntax to display data and solution to resolve above error.
Thanks and Regards,
Dipti Chhatrapati -
How to display data in canvas which is fetched from servlet to midlet.
I am able to display data from database using servlet.
I am using MySQL as database.
But i want to display it more nicely using canvas. Right now i just print all the data's , it doent look professional.
I want to know how to show those data's nicely. How to use canvas? where i can use canvas? Is there any other way to display data/records so that it looks more professional.
Need help as soon as possible.
Thanks in advance.hey listen i created midlet and servlet. I can see the record which is on my database but as i have just printed using servlet on the mobile screen. Now i want to display those records nore nicely that is . say for example
i am showing personal profile of a user.
I am just displaying like ---"Name:" Abc,
Age: 27 etc
now i wnat to bold "Name" , "Age" stuff like that.
I want to use color etc but i dont know how to do that. How can i my records look good?
I have stored all the record in resultset and have passed it to midlet not i want display it more nicely. How to do that? -
How to display dates on which the field of an infotype is changed
there are two fields in an infotype and both the fields are changed on different dates then how to display those dates on which the two fields are changed
Hi ankit,
If you want the change log for one infotype with one two fields, then write one custom program with following logic. If you want the log for multiple infotypes for multiple fileds then you have to use that program 'RPUAUD00'. Read the documentation of the program to check how to use it.
select * from pa0000 into table it_pa0000
where pernr = v_pernr.
sort it_pa0000 by begda descending.
loop at it_pa0000 into wa_pa0000.
write your own logic to compare the previous record PERSG with current record PERSG.
if this doesnt match then get the Changed DATE from AEDTM field.
wa_pa0000-AEDTM = changed date.
Else.
continue with loop.
exit.
endloop.
regards,
Shrinivas -
How to display data stored in a ResultSet
Hello, I have a resultSet that is returned by a stored procedure.
Does someone know how to display that data in a datagrid or something?
Tranks.Hi,
What you need is an <h:dataTable> component.
Try the following code :
<f:view>
<h:form>
<h:dataTable value="#{myHandler.dataModel}" var="variable">
<f:facet name="header">
<h:panelGroup>
<h:outputText value="All Records"/>
</h:panelGroup>
</f:facet>
<h:column>
<f:facet name="header">
<h:outputText value="NAME" />
</f:facet>
<h:outputText value="#{variable.NAME}"/>
</h:column>
</h:dataTable>
</h:form>
</f:view>You can add as many column elements you want. Replace #{variable.NAME}
with the name of the other columns.
And in your handler
private DataModel dataModel;
public DataModel getDataModel()
if (dataModel == null)
dataModel = new ResultSetDataModel();
dataModel.setWrappedData(getResultSetMethod())
return dataModel;
}The getResultSetMethod() must be returning your resultset.
I hope this helps.
Petros
Maybe you are looking for
-
Cannot delete R&R backups, not enough space
I have R&R V3.01.1037.00 installled on my son's laptop. It has some old R&R backups which I want to delete. I've run R&R from the Programs list and found the Advanced tab which allows me to delete backups ... however when I try and delete one it sa
-
Looking for a replacement monitor?
My original 17" Apple Studio Display is going bad and needs replacing. I have both DVI & ADC ports on the back of my G5. Can I use any LCD with a DVI input? Samsung's website shows connecting to a mac using a D-sub connection? I was hoping to plug &
-
How do i get disabled off my ipod touch and i dont have itunes
i really need some help can you assist me?
-
whil calling tuxedo API AccountLocateFindByServiceId , we are getting the below . some times it is succesful but some times the error is coming. terrapin.tuxedo.TuxError: TPENOENT - no entry found : TPED_TERM - Terminated from the application request
-
Logo outline transparent for web
I have created a logo. I did it with black fill and white lines. This works well for a white background, like in print; but for the web the white needs to be transparent so the background colors show through and where lines cross you can see the back