How to display data on the bases of master plan in Quality Results

Dear,
I have been woking on quality results to insert data through interface in child view(Q_COTTON_TEST_CHILD_IV) which is auto generated view as built-in functionality. Master quality plan has been inserted from fron-end while child data inserted throught interface & fron end as well. In quality module, when select child plan and call detail but don't appeare data which inserted through interface table while manual entry of chile record is being displayed,
Still, i have coufused that how can we make relation between parent & chile record while inserting data through interface table.
Kindly please advice to get this.
thnks...

Similar Messages

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

How to display data in the same tab components ?

Hi,
I have a tabbed pane and contains 3 tabs. I have entered some value in the text field and clicked the enter button in the 3rd tab.This enter button contains some validation code and after validation it will display some data in the text area in the same tab. In the mean time , i am navigating to another tab eg first tab. But my data is displayed in the second tab instead of 3rd tab.
can anyone help me to solve this ?
bye for now
sat

But my data is displayed in the second tab instead of 3rd tab.
can anyone help me to solve this ?Then you are updating the component on the second tab. Fix your code.

How to display data in the same row

Hi i have a data like this
sales_order_no shipped_amount aggregate_source_order_num
1 10000 sao/1
1 10000 sao/2
2 10000 sao/4
2 10000 sao/5
2 10000 sao/6
now i want to disply like this:
sales_order_no shipped_amount aggregate_source_order_num
1 10000 sao/1,sao/2
2 10000 sao/4,sao/5,sao/6
can anybody help me how to do it??
i really appreciate your help.

or
SQL> set linesize 120;
SQL> with sales_order as
2   (select 1 sales_order_no, 10000 shipped_amount, 'sao/1' aggregate_source_order_num from dual union all
3    select 1 sales_order_no, 10000 shipped_amount, 'sao/2' aggregate_source_order_num from dual union all
4    select 2 sales_order_no, 10000 shipped_amount, 'sao/4' aggregate_source_order_num from dual union all
5    select 2 sales_order_no, 10000 shipped_amount, 'sao/5' aggregate_source_order_num from dual union all
6    select 2 sales_order_no, 10000 shipped_amount, 'sao/6' aggregate_source_order_num from dual)
7 select so.sales_order_no,
8         so.shipped_amount,
9         substr(max(substr(sys_connect_by_path(so.aggregate_source_order_num,','),2)),1,60) aggregate_source_order_num
10    from (select sales_order_no,
11                 shipped_amount,
12                 aggregate_source_order_num,
13                 row_number() over (partition by sales_order_no, shipped_amount
14                                    order by sales_order_no, shipped_amount) rn
15            from sales_order) so
16 start with so.rn = 1
17 connect by so.rn = prior so.rn + 1
18 and prior so.sales_order_no = so.sales_order_no
19 group by so.sales_order_no,
20           so.shipped_amount;
SALES_ORDER_NO SHIPPED_AMOUNT AGGREGATE_SOURCE_ORDER_NUM
             1          10000 sao/1,sao/2
             2          10000 sao/4,sao/5,sao/6
SQL>

How to display data depend upon ListBox value?

Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
Raghu

Simply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

Take a look at this document that discusses how to monitor IMAQ memory usage:
http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
Hope this helps -
Julie

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
I have attached the VI.
Thanks for the help
Attachments:
new_control_and_acquisition_program.vi ‏946 KB

got these vi's off ni site a while ago - see if they help
Attachments:
Memory_Monitor.zip ‏132 KB

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

How to display data in a table on the screen

Dear members,
I have to display data from the database in a table on my screen when the page loads.
I have created the VO and the AM and made the mappings for the columns i want to display but the table on my screen is not fed when the page loads.
I have created my "table" region with the columns to display but i don't know the code to implement in the processRequest of the AM and the VO to display thes results of the VO query when the page loads.
Thanks in advance for your answers.

Hi,
In CO Process Req:
import xxx.oracle.apps.pa.setup.server.ApplicationModuleAMImpl ;
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ApplicationModuleAMImpl AM=(ApplicationModuleAMImpl )pageContext.getApplicationModule(webBean);
AM.init();
In AM:
public void init()
searchVOImpl Searchvo=getsearchVO1();
Searchvo.executeQuery();
Note:
This is simple execute query.
Regards
Meher Irk

Display data in the form of subgrouping of a table.

hi,
    i need to display data in the table in the below format
1 1000 header1 quantity amount
               item1      100           200
                              50             500
2 1001 header2   chairs      5000
               item2         50            100
                               100           1000
plz help me how to do this

Hi Praveen,
Please check 'Grouping' view in component WDR_TEST_TABLE .
It will give you some idea.
Regards,
Sumit

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

How to display data in table

Hi all,
can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
Thanks & Regards,
Naveen

DATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
TYPES: BEGIN OF TY_PFTAB,
       RATEGROUP TYPE /BIC/OIWRATEGRP,
       LEVEL TYPE /BIC/OIWPCSLEVEL,
       FROMDATE TYPE /BI0/OIDATEFROM,
       FROMTO TYPE /BI0/OIDATETO,
       STANDARD TYPE /BIC/OIWSTRATE,
       OVERHEAD1 TYPE /BIC/OIWOHRTE1,
       OVERHEAD2 TYPE /BIC/OIWOHRTE2,
       OVERHEAD3 TYPE /BIC/OIWOHRTE3,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_PFTAB.
DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
       WA_PFTAB TYPE TY_PFTAB.
SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
*TYPES : BEGIN OF TY_EXCEPTION,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_EXCEPTION.
*DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
      WA_EXTABLE TYPE IT_EXTABLE.
*SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
get element via lead selection
lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
@TODO handle not set lead selection
IF lo_el_professionaltable IS INITIAL.
ENDIF.
get all declared attributes
lo_el_professionaltable->get_static_attributes(
   IMPORTING
     static_attributes = ls_professionaltable ).
lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ).

To fetch data on the basis of last program run date and time

Hi all,
My query is as folows:
I am selecting BOM components from STPO table on the basis of some criteria.
My requirement is to select only BOM components which are newly added or created after last program run,i.e. STPO-AEDAT and STPO-ANDAT are greater than last program run.Here i fetched last program date from customised structure(client specific) which has date field also,and compared with aedat and andat in STPO records.But how can I connect it with last run time as there is no such time field in STPO table.I need to fetch this data on the basis of last program run(time+date).
Please help me..it's crucial,
Thanks in advance,
Meena

Hi,
We had a very similar requirement.
We developed a custom-solution for this.
Create a Z-Table and update it with your progname, date and time.
Whenever the BOM was changed, it generated a change number ( this has to be done by the user)
You can get the date and time from the change Number Table AENR and compare it with the timestamp in Z-TABLE
Hope it helps,
RJ

How to display Date Calendar in Oracle BI Answers Prompts (parameter)

I'm still new to OBIEE.
How to display Date Calendar in Oracle BI Answers Prompts (parameter)?
Thanks.

Hi,
While creating Dash Board prompt choose the control to 'Calendar'.
I think it is not possible to provide 'Calendar' control using Prompts tab while creating request.
It is possible to write Java Script for a Column of data type 'char'. So, cast the date data type to char.
Go to: Column Properties --> Data Format
Choose override default data format to view the available options in the drop down list.
I would be very happy if anybody acknowledge me that I am wrong.
-Vency

How to get data on the next page in case of templates if data is more ?

please tell me how to get data on the next page while i m using template in my first page , if data is more howw it can be displayed on the next page ?

HI Asim,
template is fixed we it can't be expand . u can better to use table line it can automaticlly expending if data is more ... u can create one more page like page 2 and create a window for entire second page ..then assign it in first page (next page page2).
regards
kiran kumar.

How to display data on the bases of master plan in Quality Results

Similar Messages

Maybe you are looking for