How to display dialog boxes

How do I make dialog boxes to appear in itunes so I can finish my sync?

sauljaffe wrote:
Except that the instructions in that article won't work:
Step 3 says: "When your battery gets low, the low battery warning dialog appears on the screen."
No such dialog box appeared when the battery got low.
Step 4 says: "when the battery gets very low, the computer will automatically go to sleep."
No, the computer shut off completely. It did not go to sleep.
Based on steps 5&6 the battery should be "calibrated" when it finishes recharging, no?
By the way, the "Tip" is wrong too: the computer doesn't go into sleep mode, doesn't save an image, and doesn't restart from that place when the computer is turned on again.
If you charge it all the way up after it shuts down, that's almost as close to calibrating as you're going to get in your situation. I say "almost" because you can go one step further and let it go without charging overnight (5 hours is the number that I've heard) before charging. Some people have also suggested letting it completely charge before booting it.
The tip is correct for a properly functioning MBP, OS, and batt (unless this has changed on the newer models), unless you have disabled safe sleep in Terminal.
All the symptoms you mention are signs of a dying batt (whether due to one or more bad cells, or the on-board microchip).

Similar Messages

How can a dialog box close itself?

I have a dialog box which displays a little form for some extra information. I have some non-standard buttons which are under my control. The form is created as a view in a window which is launched by CREATE_WINDOW.
I want the window to be able to close itself. The concept is easy - get a ref to the window, then call close( ).
But I cannot find a way to get a reference to the window from inside the window.
Here is my current solution which I do not like, but it works.
I create a context node 'POPUP' which has an attribute ME of type ref to if_wd_window.
When I create the window, I do this:
lo_window         = lo_window_manager->create_window( ... )
lr_node = wd_context->get_child_node(   'POPUP'   ).
lr_node->set_attribute( exporting name = 'ME'
                                      value = lo_window ).
lo_window->open( ).
In the window, it gets ME out of the node, and does a lr_me->close( ).
But there is a better way, right? How does a dialog box close itself under program control?
I should add that the dialog box is displaying a view from a used component, so POPUP is defined in the used component and mapped into the context of the using component. I don't think this changes the problem, though.

Hi
Try this following code in method of button you have created for popup i.e method for example ok,cancel etc in the view which you have emebedded in ur window for popup.
Close the popup
DATA:
    lo_api         TYPE REF TO if_wd_view_controller,
    lo_window_ctlr TYPE REF TO if_wd_window_controller,
    lo_popup       TYPE REF TO if_wd_window.
lo_api         = wd_this->wd_get_api( ).
lo_window_ctlr = lo_api->get_embedding_window_ctlr( ).
lo_popup       = lo_window_ctlr->get_window( ).
IF lo_popup IS BOUND.
    lo_popup->close( ).
ENDIF.

How to display check box in atable control

hi
here is my requirement
how can i display check box in table control and also when i check that check box it has to dispaly one pop up screen with the records of table control row
points will be rewarded
Thanks&Regards
Nagesh.Paruchuri

Hi,
See this code for how to display check box in atable control
*---- Table declaration.
TABLES: KNA1.
CONTROLS TC1 TYPE TABLEVIEW USING SCREEN 200.
CONTROLS TC2 TYPE TABLEVIEW USING SCREEN 300.
*---- Data declaration.
DATA:OKCODE LIKE SY-UCOMM.
DATA:V_KNA1 LIKE KNA1.
*DATA:ERROR TYPE C.
*---- Internal Table declaration.
DATA:BEGIN OF IT_TAB OCCURS 0,
      CHK,
      VBELN TYPE VBELN_VA,
      KUNNR TYPE KUNAG,
      ERDAT TYPE ERDAT,
      AUDAT TYPE AUDAT,
      VBTYP TYPE VBTYP,
     END OF IT_TAB.
DATA:BEGIN OF IT_TAB1 OCCURS 0,
      VBELN TYPE VBELN_VA,
      POSNR TYPE POSNR_VA,
      MATNR TYPE MATNR,
      MATWA TYPE MATWA,
      PMATN TYPE PMATN,
     END OF IT_TAB1.
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OKCODE = SY-UCOMM.
CASE OKCODE.
    WHEN 'DISP' OR SPACE.
      SELECT *
         FROM VBAK
         INTO CORRESPONDING FIELDS OF TABLE IT_TAB
         WHERE KUNNR = KNA1-KUNNR.
      IF SY-SUBRC <> 0.
        MESSAGE 'No sales document exists'(001) TYPE 'I'.
      ENDIF.
      LEAVE TO SCREEN 200.
      CLEAR OKCODE.
*--- To leave Transaction
    WHEN 'BACK' .
      LEAVE PROGRAM.
      CLEAR OKCODE.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module validate_kunnr INPUT
MODULE VALIDATE_KUNNR INPUT.
V_KNA1 = KNA1.
SELECT SINGLE *
    FROM KNA1
   WHERE KUNNR = KNA1-KUNNR.
*-----Process error condition
IF SY-SUBRC <> 0.
    CLEAR KNA1.
    KNA1-KUNNR = V_KNA1-KUNNR.
    CASE OKCODE..
      WHEN 'BACK' OR 'EXIT' .
        LEAVE PROGRAM.
    ENDCASE.
    MESSAGE 'Customer Does Not Exist'(002) TYPE 'I'.
    LEAVE TO SCREEN 100.
ENDIF.
ENDMODULE.                 " validate_kunnr INPUT
*&      Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
MODULE USER_COMMAND_0200 INPUT.
CASE OKCODE.
    WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      LEAVE TO SCREEN 100.
      CLEAR OKCODE.
      CLEAR IT_TAB1.
    WHEN 'DISP' .
      CLEAR OKCODE.
      READ TABLE IT_TAB WITH KEY CHK = 'X'.
   IF SY-SUBRC = 0.
        SELECT VBELN   POSNR MATNR MATWA PMATN
     FROM VBAP
     INTO TABLE IT_TAB1
     WHERE VBELN = IT_TAB-VBELN.
        IF SY-SUBRC = 0.
          SORT IT_TAB.
          DESCRIBE TABLE IT_TAB LINES TC1-LINES.
          LEAVE TO SCREEN 300.
        ELSE.
          MESSAGE E016(YBHV).
        ENDIF.
      ELSE.
        MESSAGE 'Please select one record' TYPE 'I'.
      ENDIF.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
*&      Module STATUS_0200 OUTPUT
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'PF3'.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_C.OMMAND_0300 INPUT
      text
MODULE USER_COMMAND_0300 INPUT.
SET PF-STATUS 'PF3'.
CASE OKCODE.
    WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      CLEAR OKCODE.
      LEAVE TO SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0300 INPUT
*&      Module modify INPUT
MODULE MODIFY INPUT.
MODIFY IT_TAB INDEX TC1-CURRENT_LINE.
ENDMODULE.                 " modify INPUT
*&      Module okcode OUTPUT
      text
MODULE OKCODE OUTPUT.
CLEAR OKCODE.
ENDMODULE.                 " okcode OUTPUT
Reward Pointsa If usefull
Regards
Fareedas

How to disabel dialog box in os x

how to disabel dialog box in os x

"Network connection is lost" is an iChat stuff, but I still have challenges with Flash AIR...

How to disable dialog box for ending document display

I have a wf item that has a pdf attachment. Every time the attachment is opened, a dialog box appears stating:
1. Switch to the window of your PC application to display the document
2. Close your document
3. Press "Continue" in the R/3 window
I've tracked it back to screen 0300 in LS025002.
It's only informational and shows up after the attachment has already been opened and closed.
How do I stop this dialog box from appearing?

Those little popup boxes are called tooltips and they are programmed into the page. As iBod says, they cannot be disabled.
There are a couple of things you can do on pages you know have tooltips. There is a time delay of a couple or three seconds before the first tooltip appears. So one way to keep their appearance to a minimum is to make up your mind before you move to an item to click on it and to not hover on items with tooltips for any amount of time. Also, if a series of menus or items all have tooltips, the time delay only exists for the first one. If you immediately move to the next item, the tooltip appears instantaneously. So with such a series, if you move completely off the series, the time delay will be reinstated.

How to prevent dialog box asking how to handle PDFs while Protected Mode is disabled?

Hello,
So I must be missing a Registry Key setting somewhere or something (I hope). We have Adobe Acrobat Reader 10.1.4. When we install Adobe Acrobat Reader we disable Protected Mode due to some issues with it.
My problem is, when you launch Reader or try to view a PDF embedded in a web page (or anywhere else for that matter) it will pop up a dialog box asking you how to proceed. You are given three options:
Open PDFs while Protected Mode is disabled this one time.
Always open PDFs while Protected Mode is disabled.
Never open PDFs whle Protected Mode is disabled.
I need to configure it so that option 2 is how Reader behaves.
We are a small shop, I have only 4 people on my team (excluding me). We have over 1500 machines as public kiosks that need to get this configured when 10.1.4 is installed. Reader is currently out of date in our deployment, apparently because of this issue holding back pushing newer versions.
If anyone has any ideas I'd love to hear them. I set it manually and looked at the registry hive for Adobe and didn't see any changes to existing keys or any new keys created so I'm not sure this is something that can be done via the Registry...

Well, this didn't come up in Google Searches initially and I'm not finding the search feature here at Adobe.com to be very useful. Actually, I can't even seem to see one for the forums...
Anyways this seems to cover the issue: http://blogs.adobe.com/dmcmahon/2012/07/27/adobe-reader-cannot-open-protected-mode-due-to- a-problem-with-your-system-configuration/
Which helps explain why it became a problem for my deployment. I'm suspecting that its a problem with Kaspersky Anti-Virus 2010 needing to have an exception for AcroRd32.exe. I hate to do it given its an infection path but we do what we must. I will update this post once I have verified that this is what the issue is.

How to copy dialog box

Under Safari-Preferences-Passwords, there is a list of my online passwords. How can I copy the contents of that dialog box and paste it into a printed document that I can put away in a safe place?

That means you cannot copy the information. You could make a screen snapshot of it:
To post screen shot do this:
Press COMMAND-SHIFT-4 which will change the cursor to crosshairs.
Hold down the mouse button and use the crosshairs to select the part of the screen you wish to capture.
Release the button and the image will be saved to your Desktop.
Click on the Camera icon in the toolbar of the forum message editor.
Drag the image onto the Choose File button and click on the Insert button.

AppleScript Newbie - Display dialog box when quitting an application

Hello.
I was wondering if it's possible to write a script that displays a dialog box (in this case one saying "BACK UP!!!!") everytime i quit Final Draft.
Thanks.
F.

A regular AppleScript does not have the ability to get system notifications, so you would have to do something like have the script continually check (poll) for applications that are running. A Cocoa-AppleScript does have the ability to do Cocoa-y stuff such as register for system notifications, so you can create a new applet (AppleScript Editor > File > New from Template > Cocoa-AppleScript Applet), paste in the following, and save it as an application (uncheck the option to show the startup screen):
property theApps : {"Final Draft"} -- a list of applications to watch for
on run -- example
# add observers for workspace notifications
tell current application's NSWorkspace's sharedWorkspace's notificationCenter
    addObserver_selector_name_object_(me, "appQuit:", current application's NSWorkspaceDidTerminateApplicationNotification, missing value)
end tell
-- tell application "Final Draft" to activate
end run
on appQuit_(aNotification) -- an application quit
# aNotification's userInfo record contains an NSRunningApplication instance that we can get properties from
set theApplication to (aNotification's userInfo's NSWorkspaceApplicationKey's localizedName()) as text
if theApplication is in theApps then
tell current application -- me
    beep 3
    activate -- make sure dialog comes to front
    display dialog "BACK UP!!!!" with title "Final Draft quit notice" buttons {"OK"} default button 1
    quit
end tell
end if
end appQuit_
When the application is run it will sit there and receive notifications when other applications quit, and checks to see if it was the application you want.

How to create dialog box in jsp

I want to call dialog box from jsp.
how it possible.
any one give somecode sample

Hi,
you can use 'javascript'
alert
confirm
prompt
--Karthik

How fix lost dialog box for typing in wanted web site url after installing security update 20110811165603 into Mac OS 10.6 snow leopard today 6.04.2011.

Today, was prompted to install new security update. Did so. Now when click on + to open new tab the words New Tab appear in the tab. But, no dialog boxes appear to type in wanted new URL and no google dialog box appears in the tab area.
Every thing was fine before installed this new security update 20110811165603 into Mac OS 10.6 snow leopard computer.

Thanks for your reply and sorry for the delayed response - have been away for a few days over the holidays.
I understand your point about backups and disk permissions. I do have a back up copy and will adopt using the 'verify disk' step in future; so, for me the loss shouldn't amount to any more than the time I have spent, as frustrating as that is. However, I think the point I'd like to make is that doing a disk permissions check is fine for those like me [or others on this forum] since I work in a hi-tech industry, and have worked in a Unix/Linux environment for the last ~20 years so understand about permissions etc. , but I know people with Macs for whom the key advantage is that the they largely 'manage themselves' seamlessly. So, if the verify step is simply a pushbutton check-then-repair step and omitting it can lead to such fatal errors, then why can't it be built into the update script as the first automatic step ? What I mean is; my computer reached this unusable state simply by pressing 'ok' on a planned update, so to the average-Joe user it looks like a 'stop and catch fire mode'.
For info: I have now used Disk Warrior, which is reporting a disk malfunction, but can recover the user data. It seems to be a remarkable coincidence though, because there were no system problems exhibited before the update.

How to supress dialog box when calling smartforms and just create a spool..

Hello Experts,
I want to supress the dialog box where you can print preview or print your smartforms. What
I want is to just create a spool file for this one. Think of it as smartforms running in background.
Thank you guys and take care!

Hi again Vishwa,
I modified my code according to your last reply but it still wouldn't work. The dialog still pops up without the print and print preview buttons. Below is my code:
MOVE 'X'    TO ltyc_control-no_open.
    MOVE 'X'    TO ltyc_control-no_close.
    MOVE 'X'    TO ltyc_control-no_dialog.
    MOVE 'X'    TO ltyc_options-tdnewid.
    MOVE 'X'    TO ltyc_options-tdnoprev.
    MOVE 'X'    TO ltyc_options-tdnoprint.
    MOVE 'LOCL' TO ltyc_options-tddest.
    MOVE space TO ltyc_options-tdimmed.
    CALL FUNCTION 'SSF_SHOW_DIALOG'
      EXPORTING
*        ARCHIVE_PARAMETERS         =
        user_settings              = ''
        output_options             = ltyc_options
        control_parameters         = ltyc_control
*        OK_BUTTON                  = ''
      IMPORTING
*        E_ARCHIVE_PARAMETERS       =
        e_output_options           = ltyc_options
        e_control_parameters       = ltyc_control
      EXCEPTIONS
        formatting_error           = 1
        internal_error             = 2
        send_error                 = 3
        user_canceled              = 4
        OTHERS                     = 5.
    IF sy-subrc <> 0.
*      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
      EXPORTING
        formname                 = lcc_z2574ffi_ra_cimb
*        VARIANT                  = ' '
*        DIRECT_CALL              = ' '
      IMPORTING
        fm_name                  = ltyc_function
      EXCEPTIONS
        no_form                  = 1
        no_function_module       = 2
        OTHERS                   = 3.
    IF sy-subrc <> 0.
*      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CALL FUNCTION ltyc_function
      EXPORTING
        control_parameters = ltyc_control
        output_options     = ltyc_options
        user_settings      = ''
        im_adrnr           = gtyc_adrnr
        im_name1           = gtyc_name1
        im_name2           = gtyc_name2
        im_str_suppl1      = gtyc_str_suppl1
        im_str_suppl2      = gtyc_str_suppl2
        im_str_suppl3      = gtyc_str_suppl3
        im_post_code1      = gtyc_post_code1
        im_city1           = gtyc_city1
        im_vblnr           = gtyc_vblnr
        im_zaldt           = gtyc_zaldt
        im_swnes           = gtyc_swnes
      TABLES
        im_regup           = gt_regup
      EXCEPTIONS
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        OTHERS             = 5.
    IF sy-subrc <> 0.
*      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
Edited by: Viraylab on Nov 26, 2008 10:55 AM

How to supress dialog box in SUBMIT (Program_name) clause

Hello Experts,
statement like this:
SUBMIT RKACOR04 using SELECTION-SET 'TEST' EXPORTING LIST TO MEMORY
AND RETURN .
but during the process there is a dialog box which prevend automatic processing. is it possible to supress the dialog box via additional clause?
Thanks

Are you sure you want to use this report, it is not intended for a regular/periodic use, this program adjusts total and detail records in CO tables in case of difference
Use RKACOR04 only with support from the SAP Hotline service or from an expert consultant for CO data structures.
also
SAP recommends running the report in the background.
You should correct the cause of dysfunction, and then only run once this report when actually needed, also read the OSS notes on this report.
Regards,
Raymond

How to display check box in the search help restriction pop-up window

Hi Experts,
I have created one searc help with dialog value restrictions. Search help contains 4 fields.
Out of which one field has length one character.
As oon as user press on F4 on particular field, it will display pop-up window with restrictions and displayed 4 fields.
I would like to show that field ( one character length field) as check box in search help restrictions pop-up window.
Pls help me ,... How can we acheive this..
Thanks
Raghu

Ur Exact Requirement,
Types : begin of itab,
     fields type c,
     Check type c,(For Check Box)
     end of itab.
data it_tab type standard table of itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_input-low.(If it is in select-options)
CLEAR v_input.
GET CURSOR FIELD s_input VALUE v_input.
CALL FUNCTION 'AIPC_CONVERT_TO_UPPERCASE'
    EXPORTING
      i_input = v_input
      i_langu = sy-langu
    IMPORTING
      e_output = v_input.
CLEAR s_input-low.
IF v_input NE '' .
    IF v_input NE '?'..
      v_input1-sign = 'I'.
      v_input1-option = 'CP'.
      v_input1-low = v_input.
      APPEND v_input1.
    ENDIF.
ENDIF.
SELECT DISTINCT   Field
                  FROM Table
                  INTO TABLE it_tab
                  WHERE field IN v_input.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
            i_title                 = 'Select Colors'
           i_selection             = 'X'
            i_zebra                 = 'X'
            i_screen_start_column   = 5
            i_screen_start_line     = 5
            i_screen_end_column     = 30
            i_screen_end_line       = 12
            i_checkbox_fieldname    = 'CHECK'
            i_tabname               = 'IT_TAB'
            i_scroll_to_sel_line    = 'X'
            it_fieldcat             = it_fieldcat1
            i_callback_program      = sy-repid
            i_callback_user_command = 'USER_COMMAND1'
          IMPORTING
            es_selfield             = selfield
          TABLES
            t_outtab                = it_tab
          EXCEPTIONS
            program_error           = 1.
Cheers,
Naveen

How to display Check box in Reports

Hello all,
I just want to know about how to have a check box in the Reports.
The check box should be checked if the value in the columns is true and unchecked if the value is False.
Thank you
Susan

Try the below code
select
     APEX_ITEM.CHECKBOX(1, field_name ,decode(fileld_name , 'N',null,'CHECKED'))
      field1 ,
      field2
from some_table;Regards,
Shijesh

How to display dialog in center of application?

Hi there,
How do I place a dialog at the center of the application?
(I am using javascript to create this script)
Thanks in advance!

Use Window.center()
var w = new Window('dialog', 'Hello World');
w.preferredSize = [400,200];
w.center();
w.show()
Regards
Davide Barranca
www.davidebarranca.com
www.cs-extensions.com

How to display dialog boxes

Similar Messages

Maybe you are looking for