How to display each anchor point number or label?

Hello AI Community,..
                                  in an earlier Illustrator CS version, i was able to display any Paths' anchor point Numbers or label. But in CS6 with both "Anchor/Path Labels" enabled in Prefs. > Smart Guide section and in View > Smart Guides, no Point Numbers are displayed.
Please let me know,..
1) ..how to display each paths anchor point numbers or label?
Thanks again for any help or suggestions,
Jeff

Thanks Kurt,..
                      just got in, checked and saw Measurment Labels, Anchor/Path Labels, Alignment Guides and Obj,Highlighting are all on. I also realized their working properly as "Anchor" and "Path" text labels display whenever moused over.
But i can't remember how i enabled anchor point numeric display?
Checked all menus i could find without luck.
Any and all suggestions appreciated,
Jeff

Similar Messages

  • Hi Everyone,  I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

    Hi Everyone,  I am using iPhone5, my question in how to display name and contact number both stored for incoming and outgoing calls? If I have saved five different numbers with a same name, how do I recognise that from which number caller is calling?

    I have friends all over Europe, does it matter what number they use to call me? Nope! All incoming calls are free for me.
    The only time you ever have to worry about which number is if you get charged for incoming domestic/international calls.
    You can tag their number (work/home/iphone) and that may show on the CallerID accordingly.
    It should show, John Doe
    underneath,    work/home/mobile
    For example:
    http://shawnblanc.net/images/img-0009-1.png

  • How to align mesh Anchor Points?

    Hello,
              is there any way to auto align, one or multiple mesh anchor points with another?
    thanks for any help,

    Hi DrStrik9,
                       a) i'll prep screenshots and send soon as done,
    b) i am creating mesh Keyframes, then Blending between both keys to produce intermediate frames. But the blend in AI is completely linear requiring impractical number of Blend keyframes and difficult to maintain alignment even if editing blend Speed or acceleration via blend path point tangents. 
    So i import AE, non-linear, accurate rotobrush paths in order to Envelope the Blend meshes into the AE rotos. But before that can be done, each Blend mesh must be mapped into a Rectangle, otherwise the resulting envelope contains  gaps, created from the space between the mesh edges and its' rectangular bounding box. And Mesh Tormentors' "Align segments with path" works mapping mesh to rectangle, but it cannot be recorded as Action or script so can Not be automated that i could find.
    Really appreciate any help and suggestions,
    J

  • How to align an anchor point with an object?

    I have a shape I made with the pen tool, and now I want to align one anchor point of the shape with the middle of a rectangle. How can I do this? It doesn't seem like I can do what I do for objects, which is select both objects, click the object I want to align to, and hit align. If I'm not describing this properly let me know and I can try to clarify.

    ...another way...
    1. grab the Rectangle Tool
    2. move your mouse on top of the Anchor you wish to align
    3. draw a rectangle wider than the shape, centered on the Anchor
         - click and drag to draw a rectangle (don't release yet),
         - then press Alt to make it centered on top of the anchor,
         - release the mouse, then the Alt key.
    4. select both your shape and the rectangle
    5. press Ctrl+G to group them
    6. select both, the newly created group and the rectangle
    7. align your shapes
    8. ungroup and delete your temporary rectangle
    9. to align vertically, make your temp rectangle wider and taller than your shape.

  • How can I use anchor points in Photoshop CC?

    I'm using a trial version of Photoshop CC and I am trying to put a formed border around some text. I was able to do this with my other Photoshop program with manipulating anchor points. The CC version is layed out differently. How can I use and form anchor points?

    Hi Sheryl.  I must admit, I looked at your post earlier, and it was too obscure to get a handle on (did I really just say 'handle'? ).  But I think I can see where you are coming from now.  Yes, the manipulation of paths has changed a wee bit with CC, but it is pretty intuitive, and a lot of it will still work fine using your old methodology.
    Take a look at some of these Julieanne Kost blog posts
    https://blogs.adobe.com/jkost/tag/path-selection-tool
    I find the most reliable way to make individual point selection work first time every time, is to select the Direct Selection tool > and with the shape/path layer selected, drag a tiny marquee around your target point.  You can then click drag that point to edit the shape or path.
    But there are so many ways to do the sort of thing you are talking about.  If you make a copy of the text layer, and make the lower of the two in the layer stack bigger (Free Transform with Alt Shift) you can then turn that lower text layer into a path or shape to manipulate it.
    Or you could add a broad stroke around the text on a new layer.  Ctrl click the stroke to load it as a selection, and turn the selection into a path using the icon at the bottom of the Paths panel, and then manipulate its points.  If you want to make the stroke a solid filled layer, then I don't know of a better way than dragging a marquee around the inner points wth Direct Selection tool, and hitting Delete.
    It's an interesting subject, so please keep asking about anything you are not sure about.

  • How to convert an anchor point to have a single control point...

    Can anyone tell me if it is possible to convert an existing anchor point on a path from a dual control point with directional handles either side of the point to a single control point with one directional handle?
    In Illustrator this is easy, all you do is drag one directional handle into the anchor point and it deletes that handle leaving just the other handle to control the shape.
    In Photoshop this appears to be much harder to achieve as dragging the handle into the anchor point doesn't work and no matter what combination of keyboard shortcuts I've tried I'm not able to get rid of just one of the handles.
    I am able to achieve what I want by splitting the path then Alt clicking on the end point of the path but this strikes me as being really clumsy compared to Illustrator's perfect solution. Even InDesign works better, as you just Alt Click on the directional handle once and it deletes it.
    What seems totally bewildering is why all these pieces of software (made by the same people) work differently?

    Yes it seems your suggestion to drag the directional point so that it sits directly on top of the anchor point is the best one can do. It doesn't actually delete the direction point like it does in AI merely makes the direction point so small it doesn't actually do anything. Not ideal really.
    Maybe all the separate development teams should meet up for a coffee some time and just iron out all these indifferences, I reckon they could get it done in an afternoon, I'd be happy to write them a list. And don't even get me started on how the Workspaces differ from app to app!

  • How can I snap anchor points to grid?

    I am trying to snap anchor points to the grid so I don't have to eye-ball the curves. Is there a way that I can do this?

    Luke,
    How about View>Snap to Grid?

  • How do You See Anchor Points When Object is Unselected

    Hi, In Adobe Illustrator is there any way of viewing the anchor points of objects permanently even when an object is unselected? So you can see where the points are when you are making shapes with the pen tool. If there was, this would make it a lot easer to place the points on existing points of other shapes without having to guess where they are. Thanks for you help Gareth.

    Oh no! I just noticed when using it, that it is not as useful as I thought, because if you want to put a point anywhere near the 90º or 45º line from the last one it forces you to put in on that line, it's great that it lets you see the points on the other shapes but too bad it makes you do that. and you can't turn off smart guides while making a shape because it stops that shape and starts a new one. That's a bit annoying, so it's still easier to do it without smart guides guessing where the points are and correct them later with the white arrow if you missed any. Thanks for you help though. Gareth.

  • 3D PSD file import : how to change 3D anchor point in AE ? Challenge..!

    Hello everyone,
    I've successfully imported a 3D file from Photoshop Extended CS4 into AE CS4. In AE, I can sucessfully animate rotation of the 3D object.
    Here's the problem : I cannot change the 3D object's anchor point. I've tried changing the anchor point's coordinates on the controller layer of the 3D object layer, the numers change, but the anchor point remains at its initial position, as if it was locked.
    I also thought changing the anchor point in PS Extended before importing the file into AE, but PS Extended does not seem to have an anchor point changing tool.
    So I even reasoned back one step : changing the anchor point in my 3D software since the beginning. Well, not possible because PS Extended seems to create an average position for the anchor point when impoting a 3D file from a third party software. So useless changing the coordinates in the 3D software.
    Photoshop Extended 3D is the only possible workflow to import 3D objects into AE that I know of.
    So, is is possible to change the 3D anchor point directly in After Effects ? What blocks that point from being changed ?
    This is quite a challenging problem, good luck for finding a solution ! I'm very sure that this technique is commonly needed and used when working in 3D, and that it will be of great help for many designers that want 3D in After Effects !
    Thanks again !
    Note : please do not confuse simple After Effects standard 3D layer, with the 3D PSD file import layer, these are two totally different types

    Any further forward with this anyone?
    This is driving me insane as well...
    I'm trying to create a simple comp within AE and have my clients logo fly on behind their text while rotating in 3D space.
    The idea is for it to rotate on the X axis, but rotate within the logo itself (straight through the axis within the logo itself)
    But when I try to rotate it, the AP is about 2.5 "logo depths" away from the logo, so when the rotation of any axis starts it looks ridiculous.
    Are Adobe really trying to tell us that moving the AP is not possible within AE for imported Live Photoshop PSD files?
    Hopefully a solution comes along soon as I cannot for the life of me figure out a workaround to the problem......
    Cheers,
    Paul.

  • How to display each character of an input string in different rows

    Dear Members,
    I want to write a SQL or PL/SQL where in I can separate and display each character of an input string into multiple rows.
    For eg, the input string is TESTING, I want the result to be displayed as following:
    1 T
    2 E
    3 S
    4 T
    5 I
    6 N
    7 G
    I know we can use substr, but it returns me only one or more than one characters consecutively.
    Please help me get the desired output.
    Thanks in advance.

    Hi,
    Perhaps
    with a as
    select 'TESTING' text from dual
    select level, substr(a.text,level,1)
    from a
    connect by level <= length(a.text)

  • How to display trailing white space in spark label?

    I have to display trailing white spaces in spark label but its automatically truncating it.
    Any alternate way? Thanks!

    Thanks for the reply. But still not working

  • How to display each record on a new page on Smartforms layout

    Hi,
    I need to know how "each time a new record is displayed..it should be displayed on a new page in Smartforms". How much ever I try using the COMMAND inside the LOOP, it is always printing the records in the loop continiously in a single page with the remaining records moving to the next page only once the first page is full. But what i need is to print first record in the first page, second record in the second page...
    Please let me know the exact steps how to use the COMMAND or any other options to acheive this.
    Thanks!
    Edited by: sap123 on Nov 2, 2008 11:55 AM

    hi,
    create a command just before the main windows display and in its general attributes check the check box go to new page and in its conditions tab..set Falg = X.
    now inbetween the loop of ut table or templet, crete program lines and write the code as below.
    data : lv_lines type i.
    describe table i_vbak lines lv_lines.
    clear flag.
    if sy-tabix LT lv_lines.
    flag = 'X'.
    endif.
    remember that these program lines must be after command...
    Try this,

  • Is there a way to change pen tool width for each anchor point?

    I'm new to illistrator, and I've been looking around to see if I can find something that will show how I can take an ancor point and change the width of it. How can I do this? Thanks.

    There's a new width tool in CS5 which will allow you to vary the width of the stroke of a path.

  • How to set a anchor point alignment character in table??

    PLs help i am a new in javasprit.
    i have no idea how to do that><
    1. select the (align the decimal point)
    2. 48mm
    3. alignment character
    my script:
    var myDoc=app.activeDocument;
        var    myParagraphStyle = myDoc.paragraphStyles.item("Table");
            myName = myParagraphStyle.name;
    var tabletable = myDoc.tableStyles.item("Table");
    var myTable = app.selection[0].convertToTable("\t","\r");
    myTable.appliedTableStyle= tabletable
    myTable.columns.item(0).width = "50 mm";
    myTable.columns.item(1).width = "50 mm";
    myTable.columns.item(2).width = "50 mm";
    var celltable = myDoc.cellStyleGroups.item('Cell').cellStyles.item('Table');
    myTable.cells.everyItem().appliedCellStyle = celltable;
        app.selection[0].applyParagraphStyle(myParagraphStyle, true);
    myTable.columns[0].cells.itemByRange(0,-1).texts.everyItem().appliedParagraphStyle = myParagraphStyle;
    Thank A Lotpls help>< i have thought for a few week

    Hi,
    If MP is your paragraph or your paragraphStyle or some text:
    MP.tabStops.add({alignment: TabStopAlignment.CHARACTER_ALIGN,
    // above is for 1
    position: 48,
    // above is for 2, unit is used from your doc settings
    alignmentCharacter: ","});
    // above is for 3
    enjoy:)
    Message was edited by: Jump_Over

  • How to display even and odd number ranges between two given inputs.

    Hi Every one,
    I am just started my career in sap abap and trying to find the solution for this.
    I am trying to display number range using select options, but I am getting an error "Memory low leave the transaction before taking a break".
    Example: when I give two number 2 and 10 , it should display set of all even and odd numbers in that range.
    Below is the code logic that I am using:
    data: a type i,
             b type i,
             c type i,
             d type i,
             num type i.
    select-options: in for num.
    a = inp-low.
    b=inp-high.
    c = inp-low mod 2.
    d = inp-high mod 2.
    while a <=b and c = 0.
    write: "even numbers:', a.
    b = a + 1.
    endwhile.
    while a <=b and c <> 0.
    write: "odd numbers:', b.
    b = a + 1.
    endwhile.
    Any help will be much appreciated.

    This is your logic...changed:
    data: a type i,
              b type i,
              c type i,
              d type i,
              num type i.
    data: even type i,
           odd  type i.
    select-options: in for num.
    a = in-low.
    b = in-high.
    c = a mod 2.
    if c is INITIAL. "It measn a is even
       even = a.
       odd  = a + 1.
    else.
       odd  = a.
       even = a + 1.
    endif.
    * Even
    a = even.
    while a <= b.
       write: / 'even numbers:', a.
    *  b = a + 1.
       a = a + 2. "The next even number
    endwhile.
    * Odd
    a = odd.
    while a <= b .
       write: / 'odd numbers:', a.
       a = a + 2. "The next odd number
    endwhile.

Maybe you are looking for