How to display empty CDR/DVDR?

I use plain fluxbox with thunar and thunar-volman. All is fine with mounting/unmounting the DVD drive, however when I have a blank disc in the drive it does not display in thunar, and I do not know how to see if it's blank in the shell. Is there some little script or something I could conjure to give a quick tooltip or pop-up display or something to show that it is blank?
I usually just eject and close tray again, then wait a few seconds after it's been "read" and disc light is off, and if nothing shows in Thunar then I know it is blank, but of course would prefer something more convenient than this
Thanks for any help.

mlau, Thanks, that is neat and could be useful to have it run a little zenity pop-up or something that says "Blank disc inserted," however, I am looking for a means to display if the disc is blank at push of a button or something, any time (not only when disc has been just inserted).

Similar Messages

How to display empty space in place of null values

Hi all,
In my application, i am reteiving values from db and printing thm in a jsp page. Right now, when there is a null value in db for a particular column, i am getting the same null value in my jsp page also. I don't want to print this null value and want to keep those particular fields as blank.Where should i make this change. Can anyone help me out.

Use JSTL c:out tag for that.
Try to omit scriptlets as much as possible. Use JSPs for view only and load the data using a servlet and DAO class. To display data and doing some conditional logic, you can use the JSTL tag library for that.

How to display empty months when grouping records by month

Guys, I've got a recordset that successfully displays all
records in the
table grouped according to the month that the record was
created in.
This allows me to display a Monthly tally (a bit like a
barchart - where the
height of the column is derived by the qty of records for
that given month)
for each of the months in the year so far. However, it dawned
on me today
that if there was no activity in a given month, the month
simply doesn't
appear at all, rather than displaying but showing "0" as I
would prefer.
For example, the type of thing I want to display onscreen is:
Month 1 2 3 4 5 6 7 8 9 10 11 12
But let's say there were no records inserted in months June
to September
(inclusive), what I'm actually getting onscreen is:
Month 1 2 3 4 5 10 11 12
But what I actually want to appear onscreen is:
Month 1 2 3 4 5 6 7 8 9 10 11 12
I hope that makes some kind of sense...
I'm using Dreamweaver CS3, ASP/VBScript, and MySQL.
My current SQL Statement is as follows:
SELECT Count(AffiliateID) AS TotalClicks, MONTH(`VisitDate`)
AS Month
FROM tbl_affiliaterefferals
WHERE `AffiliateID` = "49" AND YEAR(`VisitDate`) =
YEAR(Now()) GROUP BY
MONTH(`VisitDate`)
ORDER BY MONTH(`VisitDate`) ASC
I figured one workaround would be to have 12 separate
recordsets - one for
each month - on the one page, but there must be a cleaner way
of doing it
surely?
Any/all help greatly appreciated.
Regards
David

This is a multi-part message in MIME format.
------=_NextPart_000_0086_01C932EC.D9CE33D0
Content-Type: text/plain;
format=flowed;
charset="iso-8859-1";
reply-type=original
Content-Transfer-Encoding: 7bit
Hi Joe,
I've simply got a table, within one cell of which is another
table to which
I've applied a background colour and am specifying the height
of the <td>
cell as the qty of the number of records returned for Month 1
of the current
year. Then I'm applying a repeat region to the <TD>
cell containing the
table that varies in height, in order to force the table to
repeat
horizontally according to the number of records (months)
retrieved from the
database.
The code for the table is in the attached txt file.
I appreciate your time in responding however you must have
missed my
comments about what I'm working in as I'm working in
ASP/VBScript and
haven't the first clue when it comes to PHP.
I don't suppose you know or can point me in the direction of
an ASP
equivalent of your suggestion?
Regards
David
"Joe Makowiec" <[email protected]> wrote in
message
news:[email protected]...
> On 20 Oct 2008 in macromedia.dreamweaver, DTB-K wrote:
>
>> I figured one workaround would be to have 12
separate recordsets -
>> one for each month - on the one page, but there must
be a cleaner
>> way of doing it surely?
>
> Without seeing the code you're using to display it...
>
> Probably what that code is doing is looping through the
recordset:
>
> <?php do { ?>
> ...
> <?php } while ($row_dates =
mysql_fetch_assoc($dates)); ?>
>
> That's DW's standard PHP MySQL recordset behavior. What
you want to do
> is something more like:
>
> <?php
> for ($i=1;$i<13;$i++) { // Do 12 months
> echo '<p>Month: ';
> echo $i; //Echo the month
> if ($row_Recordset1['Month'] == $i) {
> // Have data for this month
> echo ' Clicks: ';
> echo $row_Recordset1['TotalClicks'];
> // Now get the next row
> // Note that we only want to get the next row if the
current month
> // has data. That's why the fetch command is inside the
if.
> $row_Recordset1= mysql_fetch_assoc($Recordset1);
> } // End if
> echo "</p>\n";
> } // End for
> ?>
>
> --
> Joe Makowiec
>
http://makowiec.net/
> Email:
http://makowiec.net/contact.php
------=_NextPart_000_0086_01C932EC.D9CE33D0
Content-Type: text/plain;
format=flowed;
name="Code.txt";
reply-type=original
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="Code.txt"
<table border=3D"0" cellpadding=3D"0"
cellspacing=3D"0">
<tr>
<td colspan=3D"2" valign=3D"bottom"><h1>Current
Year:</h1></td>
</tr>
<tr>
<td valign=3D"bottom" =
class=3D"BodyTxtsml"><strong>Month</strong></td>
<%=20
While ((Repeat1__numRows <> 0) AND (NOT
Rs_MonthlyClicks.EOF))=20
%>
<%Dim TotalClicks, Cellheight
TotalClicks =3D =
FormatNumber((Rs_MonthlyClicks.Fields.Item("TotalClicks").Value),
0, -2, =
-2, -2)
Cellheight =3D (TotalClicks)
%> =20
<td valign=3D"bottom" class=3D"BodyTxtsml" =
title=3D"<%=3D(TotalClicks)%>"><div
align=3D"center"><table border=3D"0" =
cellspacing=3D"0" cellpadding=3D"0">
<tr>
<td height=3D"<%=3D(Cellheight)%>" =
bgcolor=3D"#003366" onMouseOver=3D"this.bgColor =3D
'#FFDB9D'" =
onMouseOut=3D"this.bgColor =3D'#003366'"
width=3D"40"> </td>
</tr>
=
</table><%=3D(Rs_MonthlyClicks.Fields.Item("Month").Value)%></div></td>
<%=20
Repeat1__index=3DRepeat1__index+1
Repeat1__numRows=3DRepeat1__numRows-1
Rs_MonthlyClicks.MoveNext()
Wend
%> =20
</tr>
</table>
------=_NextPart_000_0086_01C932EC.D9CE33D0--

How to display a empty (non-existing) column and info in LAST row

Hello!
I´m trying to create the code that diplays all authors (author.name), empty COLUMN, NR_OF_BOOK_PER_AUTHOR.
I want the LAST ROW to display: (column1) the word 'Sum:', (column2) nr of authors, (column3) total sum of all books
Headache: How do I display the EMPTY column and how do I get the LAST ROW to display column1) 'Sum:', (column2) nr of authors, (column3) total sum of all books
It should look like this:
AUTHOR EMPTY NR_OF_BOOKS_PER_AUTHOR
I can list all authors and NR_OF_BOOKS_PER_AUTHOR using this code:
SELECT A.NAME, COUNT(B.ROWID)
FROM AUTHOR A, BOOK B
WHERE B.AUTHOR_ID = A.ID
GROUP BY A.NAME
ORDER BY COUNT(B.ROWID)
I can count the numbers of authors (should be displayed in last row column2) using:
SELECT COUNT(name)
FROM author
and I can list the total amount of books (should be displayed in last row column3) using:
SELECT COUNT(title)
FROM book
But I come up short with how to display the EMPTY column and the last row containing (column1) the word 'Sum:', (column2) nr of authors, (column3) total sum of all books
Any suggestions?
Best regards,
Daniel

I want the LAST ROW to display: (column1) the word 'Sum:', (column2) nr of authors, (column3) total sum of all booksHave a look at GROUP BY with CUBE or ROLLUP.
Cheers, APC

Mapping question - how to remove empty recordsets from output XML?

Hello everyone!
I have a mapping problem I hope you can help me out with.
Here is an example of the source message:
<IDOC>
.    <HEAD>
.    </HEAD>
.    <DET>
.    .    <Node>
.    .    .    <nodeA>001</nodeA>
.    .    .    <nodeB>OA</nodeB>
.    .    </Node>
.    .    <Node>
.    .    .    <nodeB>OB</nodeB>
.    .    </Node>
.    .    <Node>
.    .    .    <nodeA>002</nodeA>
.    .    .    <nodeB>OC</nodeB>
.    .    </Node>
.    </DET>
</IDOC>
After testing the above XML in the message mapping, here's what my target looks like:
<FILE>
.    .    <Rec>
.    .    .    <nA>001</nA>
.    .    .    <nB>OA</nB>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nB>
.    .    .    <nA>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nA>002</nA>
.    .    .    <nB>OC</nB>
.    .    </Rec>
</FILE>
"Node" in the "source" message is mapped to "Rec" in my "target" message.
"Node=" -
> "Rec"
You may notice the the "Rec" in the second entry has empty fields. The reason this is so is because I put an "IF" condition in field "nA" and field "nB" that checks whether "nodeA" in the "source" exists/has a value, and if it doesn't, empty values should be given.
Here's my problem, I need the XML output to be clean. All empty Recs should be removed from the Output XML so that it resembles the one below:
<FILE>
.    .    <Rec>
.    .    .    <nA>001</nA>
.    .    .    <nB>OA</nB>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nA>002</nA>
.    .    .    <nB>OC</nB>
.    .    </Rec>
</FILE>
I've tried several ways to get this done to no avail. Would anyone be able to help me out? I would really, really appreciate it!
Warm regards,
Glenn

Hello,
Here's how the Display Queue looks like from the "CreateIF"
Default Context:
0     [false]     [suppress]
1     [false]     [suppress]
2     [false]     [suppress]
3     [true]     []
4     [false]     [suppress]
5     [true]     []
6     [false]     [suppress]
7     [false]     [suppress]
8     [false]     [suppress]
9     [true]     []
10     [false]     [suppress]
11     [false]     [suppress]
12     [false]     [suppress]
13     [true]     []
14     [false]     [suppress]
15     [false]     [suppress]
16     [false]     [suppress]
17     [true]     []
18     [false]     [suppress]
19     [false]     [suppress]
20     [false]     [suppress]
21     [true]     []
CreateIF Context up one notch:
0     [false]     [suppress]
1     [true]     []
2     [true]     []
3     [true]     []
4     [true]     []
5     [true]     []
6      [true]     []
7     [true]     []
8     [false]     [suppress]
9     [false]     [suppress]
10     [false]     [suppress]
11     [false]     [suppress]
Here's how the Display Queue looks like from the "NodeA"
SUPPRESS     [false]
SUPPRESS     [false]
[0000000292]     [false]
[0000000292]     [true]
[0000000252]     [false]
[0000000252]     [true]
SUPPRESS     [false]
[0000000078]     [false]
[0000000078]     [false]
SUPPRESS     [true]
[0000000109]     [false]
[0000000109]     [false]
SUPPRESS     [false]
[0000000292]     [true]
[0000000292]     [false]
SUPPRESS     [false]
[0000000076]     [false]
[0000000076]     [true]
SUPPRESS     [false]
[0000000292]     [false]
[0000000292]     [false]
SUPPRESS     [true]
SUPPRESS     [false]
NodeA context one notch up:
SUPPRESS     [false]
[0000000292]     [true]
[0000000252]     [true]
[0000000078]     [true]
[0000000109]     [true]
[0000000292]     [true]
[0000000076]     [true]
[0000000292]     [true]
[0000000074]     [true]
[0000000077]     [true]
[0000000081]     [true]
[0000000292]     [true]
[0000000252]     [true]
[0000000081]     [true]
[0000000081]     [false]
SUPPRESS
Hope that helps you help me!
Glenn

How to add empty rows in table in smart form

how to add empty rows in table in smart form?
plz help me regarding this
send me ur queries to [email protected]

You will need to add some extra rows to the internal table that your table is displaying. Use a program node to append additional rows with a key but no argument.
Alternaively a template may me more suitable for your requirement than a table.
Finally, please do not include you e-mail address in your question. Your question and the answers provided to it are for the benefit of everyone in the Community.
Regards,
Nick

How to Handle Empty

Hi,
I have two column's Male and Female; based on category, say for ex in professional how many males and how many females like that i am displaying the values. If Females does not contain the values for specific type means it display empty; instead of empty i want to display 0; How i need to check in (IF Condition for empty cell), or another alternative ways.
Thanks lot,
Regards,
-B-

could you post more details?
Thanks Man
Thanks lot
Regards,
-B-
Edited by: Balaji J on Aug 12, 2008 11:43 AM

JSF rich:dataGrid - display empty cells

Hi,
I created a rich:dataGrid with 5 columns but when the arraylist has about only 2 rows of data, the data grid displays empty cells.
How do I get rid of the empty cells? border=0 did not solve the problem.
Thanks in advance.

apply simple table CSS dear.
Here is one sample style css you can modify as per your need
<style>
.myDataGrid thead th {
     background: #ffffff; /*change as per your need*/
     text-align: center;
     font-size: small;
     font-weight: normal;
     padding: 5px;
     border : 1px solid #ffffff; /*change as per your need*/
     border-bottom: 1px solid;
.myDataGrid tbody td {
     font-size: small;
     padding-right: 10px;
     text-align: left;
     border : 1px solid #ffffff; /*change as per your need*/
     padding-left: 5px;
.myDataGrid {
     width: 100%;
     border : 1px solid #ffffff; /*change as per your need*/
     border-collapse: collapse;
     margin: 10px;
.myDataGrid caption {
     text-align: left;
     font-weight: normal;
     padding: 5px;
</style>and apply it in datagrid
<rich:dataGrid columns="3" value="#{orderBean.orderItems}" var="item" styleClass="myDataGrid" >
       <h:outputText value=" #{item.description}" />
     <h:outputText value=" #{item.qty}" />
</rich:dataGrid>

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to display and edit the clob datatype column from Data base

Hi ,
I have a requiremsnt as below
1) One Table having some columns with CLOB data type along with varchar columns
2) need to display the data from DB in search screen and need to be edited clob column in edit screen
I created EO and VO with that Table and how to display the clob value into the input box for editing.
using Jdev 11.1.1.5.0 version.
Can you please help on this.
THanks & REgards,
Madhu

Hi,
If you are using an inputText component to display a Character Large Object (CLOB), then you will need to create a custom converter that converts the CLOB to a String.
For custom convertor refer below link,
http://docs.oracle.com/cd/E2438201/web.1112/e16181/af_validate.htm#BABGIEDH
(section7.4 Creating Custom JSF Converters)
Thanks,
Santosh M E

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to Display Excel Report in Client machine in Forms11g

Hi All,
we are running database in Linux server and separate Linux Application Server , But my question is how to display the data to Excel Report in the Client machine
in Forms11g applications.
Plesase suggest any method.
Regards
Venkatesulu Gunisetty

You should use webutils.
For proper answer, place ur request here in oracle Forms Thread,
Forms

Please Help::How to display a Map with LIsts as Keys and Values using JSTL

Hi,
I need some assistance on how to display a Map in JSP using struts or core JSTL. I have a HashMap which has a List of keys and each key maps to a value of an ArrayList.i.e I have an ArrayList of taxCodes and each taxCode maps to a value of taxDetails which is an ArrayList of details for for that particular taxCode. I have some trouble to display each taxCode then display taxDetails for each taxCode. Here is my code below:
OrderDetails.java
package orderitems;
import java.sql.*;
import java.util.*;
public class OrderDetails {
    private LineOder lineOrder;
    private Map lineItems;
    //returns an item number, key_item, from its unique keys
    public int getItemNumber(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        int itmNum = 0;
         * key_item a unique number for an item.
         * key_year,key_office,key_client,key_company unique keys
         * for each order where this key_item is taken
         * from.
        String select = "SELECT key_item FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + key_item +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            if(rst.next()){
                itmNum = Integer.parseInt(rst.getString("key_item"));
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itmNum;
    //get a list of item number(item codes)
    public List getAllItemNumbers(String key_year,
            String key_office,String key_client,String key_company){
        List itemNumbers = new ArrayList();
        LineItem itemNumber = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        String select = "SELECT key_item FROM "+ Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                itemNumber = new LineItem();
                itemNumber.setKey_item(Integer.parseInt(rst.getString("key_item")));
                itemNumbers.add(itemNumber);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemNumbers;
    //get a list of tax codes
    public List getAllTaxCodes(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        ItemTax taxCode;
        List taxCodes = new ArrayList();
        int itemNum = getItemNumber(key_item, key_year,
                key_office,key_client,key_company);
        String select = "SELECT key_tax_code FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + itemNum +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                taxCode = new ItemTax();
                taxCode.setKey_tax_code(rst.getString("key_tax_code"));
                taxCodes.add(taxCode);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return taxCodes;
    /////This methode returns a Map which am trying to display in JSP
    //use tax code to get tax details
    public Map getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
            System.out.println();
            System.out.println("*********CONSOLE OUTPUT*************");//display on console
            Set set = itemTaxDetails.keySet();
            Iterator iter = set.iterator();
            System.out.println("Key\t\tValue\r\n");
            while (iter.hasNext()) {
                Object taxCode=iter.next();
                Object details=itemTaxDetails.get(taxCode);
                System.out.println(taxCode +"\t" + details);
            System.out.println("************************************");
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemTaxDetails;
    //details of an item with all its taxes
    public List getAllItemDetails(String key_year,
            String key_office,String key_client,String key_company){
        List lineItems = new ArrayList();
        List itemNumbers = new ArrayList();
        Map taxDetails = new HashMap();
        LineItem item = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //A list of all item numbers in the declaration
        itemNumbers = getAllItemNumbers(key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator itemIter= itemNumbers.iterator(); itemIter.hasNext();){
                LineItem itemNum = (LineItem)itemIter.next();
                int itemNumber = itemNum.getKey_item();
                String select = "SELECT item_description,item_mass," +
                        "item_cost" +
                        " FROM " + Constants.WEB_TABLE +
                        " WHERE key_year = '"+key_year+"'" +
                        " AND key_office = '"+key_office+ "'"+
                        " AND key_client = '"+key_client+ "'"+
                        " AND key_company = '"+key_company+ "'"+
                        " AND key_item = " + itemNumber;
                rst = stat.executeQuery(select);
                while(rst.next()){
                    item = new LineItem();
                    item.setItem_description(rst.getString("item_description"));
                    item.setItem_mass(Float.parseFloat(rst.getString("item_mass")));
                    item.setKey_item(Integer.parseInt(rst.getString("item_cost")));
                    //////other details records ommited//////////////////////////
                    /* A HashMap of all itemTaxeCodes as its keys and an
                     * ArrayList of itemTaxedetails as its values
                    taxDetails = getItemTaxDetails(item.getKey_year(),item.getKey_office(),
                            item.getKey_client(),item.getKey_company(),item.getKey_item());
                    //item tax details
                    item.setItmTaxes(taxDetails);
                    //list of items with tax details
                    lineItems.add(item);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineItems;
    public Set getOrders(String key_year,String key_office,
            String key_client,String key_company){
        List lineItems = new ArrayList();
        Set lineOrders = new HashSet();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        LineOder lineOrder = null;
        String select = "SELECT * FROM " + Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                lineOrder = new LineOder();
                lineOrder.setKey_year(rst.getString("key_year"));
                lineOrder.setKey_office(rst.getString("key_office"));
                lineOrder.setKey_client(rst.getString("key_client"));
                lineOrder.setKey_company(rst.getString("key_company"));
                ////list of items with all their details
                lineItems = getAllItemDetails(lineOrder.getKey_year(),lineOrder.getKey_office(),
                        lineOrder.getKey_client(),lineOrder.getKey_company());
                //setting item details
                lineOrder.setItems(lineItems);
                //a list of order with all details
                lineOrders.add(lineOrder);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineOrders;
Controller.java
package orderitems;
import java.io.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Controller extends HttpServlet {
    private Map taxDetails = new HashMap();
    private OrderDetails orderDetails = null;
    protected void processRequest(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        response.setContentType("text/html;charset=UTF-8");
        String key_year = "2007";
        String key_office = "VZX00";
        String key_company = "DG20";
        String key_client = "ZI001";
        int key_item = 1;
        String nextView = "/taxdetails_list.jsp";
        orderDetails = new OrderDetails();
        taxDetails = orderDetails.getItemTaxDetails(key_year,key_office,
                key_company,key_client,key_item);
        //Store the collection objects into HTTP Request
        request.setAttribute("taxDetails", taxDetails);
        RequestDispatcher reqstDisp =
                getServletContext().getRequestDispatcher(nextView);
        reqstDisp.forward(request,response);
    protected void doGet(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
    protected void doPost(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <title>Simple Tax Detail Diaplay ::</title>
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <jsp:useBean id="taxDetails" class="java.util.HashMap" scope="request"/>
        <table>
            <c:forEach items="${taxDetails}" var="hMap">
                <tr>
                    <td><c:out value="${hMap.key}" /></td>
                    
                </tr>
            </c:forEach>
        </table>
    </body>
</html>am displaying taxCodes(in this case i have VAT and ICD) fine but cant figure out how to display a list of value for each taxCode.Here is the output am getting
both in my JSP and on the console:
*******************************CONSOLE OUTPUT****************************
Key          Value
ICD     [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
VAT [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
Edited by: aiEx on Oct 8, 2007 6:54 AM

hi evnafets,
yes i need a nested for loop.I have tried your advice but my bean properties are not found.Am getting this error:
javax.servlet.ServletException: Unable to find a value for "key_item" in object of class "java.lang.String" using operator "."
I have tried this as stated earlier in the post:I have tried to make the method getItemTaxDetails return a List and get the returned list value as taxDetails. I then tested to display this list on JSP and its displaying fine.
public List getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        //return itemTaxDetails;
        return taxDetails;
    }And my JSP
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <table>
            <c:forEach var="curRecord" items="${taxDetails}" varStatus="rowCounter">
                    <c:choose>
                        <c:when test="${rowCounter.count % 2 == 0}">
                            <c:set var="rowStyle" scope="page" value="odd" />
                        </c:when>
                        <c:otherwise>
                            <c:set var="rowStyle" scope="page" value="even" />
                        </c:otherwise>
                    </c:choose>
                    <tr class="${rowStyle}">
                        <td>${curRecord.key_item}</td>
                        <td>${curRecord.tax_value}</td>
                        <td>${curRecord.tax_limit_val}</td>
                    </tr>
                </c:forEach>
        </table>
    </body>
</html>I can't see where am going wrong even with your advice.Please help.
Thnx.

How to display empty CDR/DVDR?

Similar Messages

Maybe you are looking for