How to display Error in Email

Hi,
I have created alerts and it is showing in Alert Inbox. When I check in SXMB_MONI i see the error as
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Internal Server Error</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Internal Server Error</SAP:Stack>
<SAP:Retry>M</SAP:Retry
But in Alert using variable &SXMS_ERROR_CAT& and &SXMS_ERROR_CODE& I am only getting
PLAINHTTP_ADAPTER and PLAINHTTP_ADAPTER.ATTRIBUTE_SERVER
Looking at the above message, users would not get clear picture.
My Q is how to get SAP: Stack. What variable should I use in Alert to see this message.
Regards

>>SXMS_TO_ADAPTER_ERRTXT
This is for error in adapter engine,not in the integration engine(sxmb_moni)
Coming to your question,its not possible to send the complete error information via alerts.You can only use the containers specified in help.sap and that doesn't have any container for SAP:Stack.
http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
Thanx
Aamir
Edited by: Aamir Suhail on Sep 9, 2008 4:01 PM
Edited by: Aamir Suhail on Sep 9, 2008 4:04 PM

Similar Messages

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display errors in UIX

How to display errors on an UIX page if the controller is Struts ?
Following are the lines from my Action class:
ActionError error = new ActionError("error.login", "Invalid User ID or Password");
errors.add(ActionErrors.GLOBAL_ERROR, error);
saveErrors(request, errors);
return mapping.getInputForward();
Following are the tags i've added in my UIX file to display errors:
<messages>
<messageBox automatic="true"/>
</messages>
But no error appears.
NOTE: I am using JDeveloper 10g
Thanx
Aamir

I am not a JDev 10g person. However you have to use the < struts:dataScope > instead of < dataScope > I think
Check the heading "Showing Struts messages" in the link below
http://download-west.oracle.com/otn_hosted_doc/jdeveloper/904preview/uixhelp/uixdevguide/struts.html

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
         rec(150) type c,
       end of tdata,
       begin of tmtgp,
         costcent LIKE CCSS-KOSTL,
         costelem LIKE CCSS-KSTAR,
         fisyear LIKE CCSS-GJAHR,
         jan(10),
         feb(10),
         mar(10),
         apr(10),
         may(10),
         jun(10),
         jul(10),
         aug(10),
         sep(10),
         oct(10),
         nov(10),
         dec(10),
       end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
        exporting            static    = 'X'
        changing            file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(04)'
                              fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field       using 'KPP0B-VALUE(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CSPB'.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jan to fieldval.
perform bdc_field       using 'Z-BDC03(01)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-feb to fieldval.
perform bdc_field       using 'Z-BDC03(02)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-mar to fieldval.
perform bdc_field       using 'Z-BDC03(03)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-apr to fieldval.
perform bdc_field       using 'Z-BDC03(04)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(05)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-may to fieldval.
perform bdc_field       using 'Z-BDC03(05)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jun to fieldval.
perform bdc_field       using 'Z-BDC03(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(07)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jul to fieldval.
perform bdc_field       using 'Z-BDC03(07)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-aug to fieldval.
perform bdc_field       using 'Z-BDC03(08)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-sep to fieldval.
perform bdc_field       using 'Z-BDC03(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(10)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-oct to fieldval.
perform bdc_field       using 'Z-BDC03(10)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(11)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-nov to fieldval.
perform bdc_field       using 'Z-BDC03(11)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-dec to fieldval.
perform bdc_field       using 'Z-BDC03(12)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
    exporting            filename        = filename
    filetype        = 'ASC'
    tables            data_tab        = idata
    exceptions            file_open_error = 1
    file_read_error = 2
    no_authority    = 6
    others          = 17.
    check sy-subrc = 0.
    loop at idata.
    clear imtgp.
    split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
    append imtgp.
    endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
                          mode 'N'
                          MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
     t_bdcmsgcoll-msgid = <Msg id> AND
     t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
    t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
    t_success-message = g_mesg.
    APPEND t_success.
    CLEAR t_success.
ELSE.
* If there an Error-Do this..
    READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
     CLEAR g_mesg.
     t_error-msg   = g_mesg_incl.
     APPEND t_error.
     CLEAR t_error.
   ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
         t_bdctab.
REFRESH: t_bdcmsgcoll[],
           t_bdctab[].

How To Display Error Message In Self Service Page

Dear All,
I am using 11.5.10 Oracle HRMS self Service ,,,
How can I display error message on the top of the self service page if some action happen ?
Best Regards

Time entry rules maybe?

How to display error message in Billing Output Type (VF03).

Hi,
could anyone suggest how do i display error message via billing (VF03) output type?

i want to display an error message from my sapscript program.
*determine discount
it_zmas-discount = it_zmas-gross_value - zkwert.
MODIFY it_zmas.
ELSE.
MESSAGE ID 'Z0' TYPE 'S' NUMBER '999' WITH 'Please maintain cust pricing grp 34 for ' wa_zmas-matnr.
p_proc_screen = 'X'.
ENDIF.
when user enter billing doc no in vf03, user will click 'issue output type' and select their output type to be printed out.
if there's an error in the print program, it should promt out an error message and do not allowed user to print preview and print the form out.
what i had did previously, i prompt the error message and disable the print preview button. i think its not a good solution and i am not sure how to stop the form from not printing it out.
i was wondering is there any user exit of the output type, vofm (which i had this solutions from my previous question, but unsure how to use it) or any other solutions.
please help.

How to display error message in abap

How to dispaly error message in report?
i have to check the range bewteen two days and if it is not in range have to display error message only once.
next time if i press the execute button report will get executed without showing the warning message.
i am calculating the days between two dates, i am displaying the error message but if i press the execute button i will not allow me to execute the report.it again shows me the error message.i have to skip this in 2nd time.
can any one suggest what to do with this?

hello suman,
i am using select-option in my report. And i have to check the difference between two dates in select option input box( low-value and high-value). if it is greater then suppose 10 then i have to display warning message at once and then if click on execute button , the report should get executed without showing any warning messages in report.
here i am attaching my source code.please take a close look and tell me where should i have to make change.
SELECT-OPTIONS :s_bedat FOR ekko-bedat.
AT SELECTION-SCREEN ON s_bedat.
IF NOT s_bedat IS INITIAL.
    PERFORM bedat_validate.                       " Perform for Purchasing Document Date Validation
ENDIF.
FORM bedat_validate .                        " Form for Purchasing Document Date Validation
DATA : diffr TYPE i.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
    EXPORTING
      i_datum_bis                   = s_bedat-high
      i_datum_von                   = s_bedat-low
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
   IMPORTING
     e_tage                        = diffr
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF diffr GT 31.
      MESSAGE s009(zerrormsg) WITH text-000 DISPLAY LIKE 'W'.
      LEAVE TO LIST-PROCESSING.
    ENDIF.
ENDIF.
ENDFORM.                    " BEDAT_VALIDATE

How to display error message in case of function module ?

In the report i was using " message-id " to display error message....
how to use in function module ?

Hi,
Messages in Function Modules and Methods
Messages have two different functions in function modules and methods:
Normal Messages
If you use messages in function modules and methods without the RAISING addition in the MESSAGE statement, and the caller does not catch the message, the message is handled
normally according to the context in which it is called within the function module or method.
Triggering Exceptions with Messages
If you use messages in function modules and methods with the addition
... RAISING <exc>
the way in which the message is handled depends on whether the calling program handles the exception <exc> or not.
If the calling program does not handle the exception, the message is displayed and handled according to the context in which it occurs in the function module or method from which it
was called.
If the calling program handles the exception, the message is not displayed. Instead, the procedure is interrupted in accordance with the message type, and processing returns to the calling program. The contents of the message are placed in the system fields SY-MSGID, SY-MSGTY, SY-MSGNO, and SY-MSGV1 to SY-MSGV4.
Catching Message in the Calling Program
You can catch messages from function modules that are not sent using the RAISING addition in the MESSAGE statement by including the implicit exception ERROR_MESSAGE in the
EXCEPTIONS list of the CALL FUNCTION statement. The following conditions apply:
Type S, I, and W messages are ignored (but logged during background processing)
Type E and A messages trigger the exception ERROR_MESSAGE
Type X messages trigger the usual runtime error and short dump.
Catching messages is not currently supported for methods.
Regards,
Bhaskar

How to display error message raised by stored procedure in ADF Faces ?

Hi all,
From my jspx page, I call a stored procedure wrapped by a custom service method in apps module.
Based on certain condition in the stored procedure, e.g : NO DATA FOUND EXCEPTION, I raised a custom error from the stored procedure :
RAISE_APPLICATION_ERROR(-20001, 'ERROR : No Data Tobe Processed !') ;
The question is : How to display that error nicely in the jspx page ?
Below is my backing beans code to call the stored procedure :
public String okButton1_action() {
try {
SalesAM service =
(SalesAM)JSFUtils.resolveExpression("#{data.SalesAMDataControl.dataProvider}");
createdInvoices = service.processInvoice(
soFr.getValue().toString().toUpperCase(),
soTo.getValue().toString().toUpperCase(), .....
currDateTime, "O") ;
} catch (JboException e) {
System.out.println("There is error raised by stored proc..!");
System.out.println(e.toString());
Thank you for your help,
xtanto

You can add a message to the page in the following way:
FacesMessage mess = new FacesMessage(FacesMessage.SEVERITY_ERROR, "title", e.getMessage());
FacesContext.getCurrentInstance().addMessage(null, mess);

How to display error documents in selection screen level

Hi,
Currently Iam doing Smartforms for journal voucher. Iam taking multiple documents as input and displaying relavent item data for each.
Now, my requirement is i want to display invalid document numbers at selection screen level. For example there are 30 invalid document number i want to display them before start-of-selection.
Thanks in advance,
Regards,
Chinna..

i have a query......say i am using a selet-options s_ebeln for ekko-ebeln.
i want to display error messages for
1>lower limit cant be greater than upper limit?
2>for special cahracters given in the select-options fields.....etc...
now when i am writing the code......
if s_ebeln-low gt s_ebeln-high.
message e001.
it is showing SAP's message not mine.
but ....if my s_ebeln-high field is 0.
then my message is showing.
pls give me the codes for these?

How to display errors of processes

Dear All,
I created a pl/sql process with exception handling structure like this
when
no_data_found then
raise_application_error(<code>, <message>);
The message is returned to the error page, but I want to have it returned inline in notification. A possible solution would be to create a corresponding validation that runs brefore the process. Within validations you can choose between the returning locations, but that would mean that I have to integrate the logic twice.
Is there any option to display the error message for processes - raised within the exception section - inline ?
Thanks
Jens

Dear Paul,
thank you for your help. Unfortunately I have the following problem when I integrate the logic like this
when
no_data_found then
apex_application.g_print_success_message := 'Display Error';
The string 'Display Error' is displayed within the notification - that's good, but this message will also be displayed if the process fails, because I don't raise the exception. When I integrate the logic like below
when
no_data_found then
apex_application.g_print_success_message := 'Display Error';
raise;
I then get the message again on the seperate error page.
I took a look at the flows schema if there is something like apex_application.g_print_error_message, but I didn't find something useful.
Regards,
Jens

How to display Error Message in APEX from Database Stored Procedure

Hello,
Using APEX version 3.2
DB version 9.2.0.8.0
Internet Explorer version 6
I have an After Submit Page Process that calls a stored procedure. In the exception section I'm using dbms_output.putline to display an error message, but the error message is not displayed in APEX. How can I have the error message generated from the stored procedure display in APEX?
Thanks so much.

Hi Apex_Noob,
I created On Load - Before Header process that uses apex_application.g_notification := :P3_ROLE;I'm sorry but I'm not sure what you mean by "instead of using dbms_output.putline use :P1_ITEM"
I have the following code in my stored procedure
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('Role does not exist');Thanks.

How to display error message with some variable

Hi
I want to display errror message along with material number which is thr in d LOOP .
Basically i want some variable to display along with error message .
Can anybody suggest me how can i go about it?
Edited by: sonal musale on Apr 14, 2009 12:06 PM

Hi,
In the message class, suppose you use 001 for invalid material message.
So keep it like:-
Invalid Material : &1
in the message class for 001.
Now in loop use as:-
loop at itab into wa.
"perform validations
"if validation fails for current material
MESSAGE e001 WITH wa-matnr.
endloop.
Similary you can use more variables:-
Invalid Material : &1 &2 &3
MESSAGE e001 WITH <variable1> <variable2> <variable3>.
Hope this helps you.
Regards,
Tarun

How to display Error message in USEREXIT_NUMBER_RANGE ?

Hi All,
- We are using subroutine USEREXIT_NUMBER_RANGE in include RV60AFZZ to override the existing number range.
- For this, we have created a maintenance view, where number ranges are stored w.r.t Sales Org and Billing document type.
- If a number range is not found in this maintenance view, we display an error message "Number range not found"
If we create billing document from transaction everything works fine.
But, what we want to know is:-
How do we give error message if Billing documents are being created in Batch Input job ?
OR
How to add message to log of batch input job?
Regards,
Ashish

Thanks Gary, for the reply.
But, we dont want the batch job to stop, we want it to continue with the next record.
In that case we believe writing the error to an application log would be better, isnt it ?
Also, how is it possible to just return an error code to the batch program (without writing an application log) from where the current user exit was called ?
Regards,
Ashish

How to display error message in Popup window

Hi,
I have main view and when I click button I opened new pop up window.
I have some validation for the form in pop up window. I want to display the error message in pop up window.
Please let me know how to get it.
Thanks

Hi mami,
Is is very difficulty to request focus to the POP window..in our case we are trying lot of time ..but we are not success to display massage in pop window.
you will put TEXTView in you pop window where you want to display massage in you POPWINDOW.
and Create one context value Attribute as Massage
Value Attribute-----ErrMassage.
ErrMassage Attribute set your Text property of TEXTVIEW UI Element.
If(your condition is TRUE){
//Excute Your code perfectly.
else
wdContext.currentContextElement().setErrMassage("Please provide proper name");
In this way we were this massage showing in our popwindow..
thanks
jati

How to display Error in Email

Similar Messages

Maybe you are looking for