How to display errors while using HR_INFOTYPE_OPERATION

Dear Freinds,
                Iam using the Function module to upload data for infotype 0008 and custom infotype 9003, using the function module HR_INFOTYPE_OPERATION.
The data is getting upload , but while uploading i want to trace the following problems the errors  , like while iam  uploading data for a particular personnel ,  if that particular personnel no is already being  opened in PA30 by the user
then the FM should through me an error ,  like " the personnel no is being already opened" .
Iam not able to get this error could you please let me know how the functional module will return me those type of errors.
Regards
Srinivas.

CALL FUNCTION 'HR_INFOTYPE_OPERATION'
              EXPORTING
                infty         = v_infot
                number        = wa_innnn-pernr
                subtype       = wa_innnn-subty
                objectid      = wa_innnn-objps
                lockindicator = wa_innnn-sprps
                validityend   = wa_innnn-endda
                validitybegin = wa_innnn-begda
                recordnumber  = wa_innnn-seqnr
                record        = wa_innnn
                operation     = 'DEL'
                nocommit      = ' '
                tclas         = 'A'
              IMPORTING
                return        = v_return
              EXCEPTIONS
                OTHERS        = 0.
            IF v_return-type EQ 'E'.
              wa_err-pernr =   wa_innnn-pernr.
              wa_err-begda =   wa_innnn-begda.
              wa_err-endda =   wa_innnn-endda.
              wa_err-esmg  =  v_return-message.
              APPEND wa_err TO t_err.
              CLEAR wa_err.
            ENDIF.

Similar Messages

  • Error - while using HR_INFOTYPE_OPERATION - 'URG'

    Hi Experts,
    While using HR_INFOTYPE_OPERATION for updating master data i got a Error Message -
    EPG        428A complex application error has occurred
    But it is not for every time . after 3 or 4 sucessfull run i get this message and after that it will take long time to overcome automatically . I tried with log off but it is not successful.
    Please Advice.

    If this is called from custom code, make sure you call function 'HR_PSBUFFER_INITIALIZE' for each new ee processed to clear the buffer. If not, when HR_INFOTYPE_OPERATION is executed, the buffer (internal table) may still have data from previous ee which can cause dump.
    Rgds.

  • Error While using HR_INFOTYPE_OPERATION to delete records

    Hi All
    I was able to find simlar error in SDN but it did not work for me. I am using HR_INFOTYPE_OPERATION  to delete PA2006 records and update with new values. I get the following error message "No data stored for 2006 in the selected period". But The records exist. I debugged and found it fails for authorization checks. I have all the authorizations as I am able to delete it using PA30.
    FYI inserting works fine.
    Please advice.
    Thanks, Raj

    Hi Santosh
    I used the same code which you have send. Below is the one. FYI, throught my debug, I was able to figure out it fails in authorization, even though I have all authorization and I was able to delete using PA30. Please advice.
    Below is teh code that I used.
        CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
          EXPORTING
            number       = t_file1-pernr
          IMPORTING
            return       = t_return
            locking_user = sy-uname.
          CALL FUNCTION 'HR_INFOTYPE_OPERATION'
            EXPORTING
              INFTY                  = '2006'
              NUMBER                 = t_file1-pernr
              SUBTYPE                = t_file1-subty
              VALIDITYEND            = t_file1-endda
              VALIDITYBEGIN          = t_file1-begda
              RECORD                 = P2006
              OPERATION              = 'MOD'
              DIALOG_MODE            = '1'
              NOCOMMIT               = 'X'
             IMPORTING
             RETURN                 = t_return
             KEY                    = personaldatakey.
      "Unlock the employee
          CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
            EXPORTING
              number = t_file-pernr
            IMPORTING
              return = t_return.
    Thanks, Raj

  • How to handle error while using dbms_sql.execute

    Hi,
    I am inserting some records by using the following piece of code.
    stmt := 'insert into SSI_KPI_GOAL_VALUE_H (KPI_VAL_KPI_ID, KPI_VAL_RM_CDE,'|| v_day_value ||',KPI_VAL_ACT_DLY,'||v_month_val||',KPI_VAL_BIZ_UNIT_CDE) values (:kpi_array,:rm_array,:day1_array,:day1_array,:day1_array,:busnunit_array)';
    l := dbms_sql.open_cursor;
         dbms_sql.parse(l, stmt, dbms_sql.native);
         dbms_sql.bind_array(l, ':kpi_array', col1_ins,1,ins_cnt-1);
         dbms_sql.bind_array(l, ':rm_array', col2_ins,1,ins_cnt-1);
         dbms_sql.bind_array(l, ':day1_array', col3_ins,1,ins_cnt-1);
         dbms_sql.bind_array(l, ':busnunit_array', col4_ins,1,ins_cnt-1);     
         dummy := dbms_sql.execute(l);
         dbms_sql.close_cursor(l);
    I am getting an error since any one of the row contains value larger than the column.
    How to handle exception handling for those rows which is having errors. I would like insert the records which is having
    no errors. Like SAVE EXCEPTIONS for 'forall' is there any option is available to handle exceptional records.
    Please help.
    Thanks & Regards,
    Hari.

    Hari,
    What's oracle version? Are you looking for something similar to this? see following example
    DECLARE
       TYPE array
       IS
          TABLE OF my_objects%ROWTYPE
             INDEX BY BINARY_INTEGER;
       data          array;
       errors        NUMBER;
       dml_errors exception;
       error_count   NUMBER := 0;
       PRAGMA EXCEPTION_INIT (dml_errors, -24381);
       CURSOR mycur
       IS
          SELECT *
          FROM t;
    BEGIN
       OPEN mycur;
       LOOP
          FETCH mycur BULK COLLECT INTO data LIMIT 100;
          BEGIN
             FORALL i IN 1 .. data.COUNT
             SAVE EXCEPTIONS
                INSERT INTO my_new_objects
                VALUES data (i);
          EXCEPTION
             WHEN dml_errors
             THEN
                errors        := sql%BULK_EXCEPTIONS.COUNT;
                error_count   := error_count + errors;
                FOR i IN 1 .. errors
                LOOP
                   DBMS_OUTPUT.put_line(   'Error occurred during iteration '
                                        || sql%BULK_EXCEPTIONS(i).ERROR_INDEX
                                        || ' Oracle error is '
                                        || sql%BULK_EXCEPTIONS(i).ERROR_CODE);
                END LOOP;
          END;
          EXIT WHEN c%NOTFOUND;
       END LOOP;
       CLOSE mycur;
       DBMS_OUTPUT.put_line (error_count || ' total errors');
    END;Regards
    OrionNet

  • How do I get an XY Chart to display properly while using embedded loop

    s to periodically read multiple channels of similar data? (multi-Y versus specified time) The plot just becomes a point or a single plot of all values taken at one scanning of all channels. I want multiple plots over time updated at the time of scanning.I have also stored my data in a daily text file that is tab delimited. The text files consists of a row of text column headers, a blank row and then rows of data. The data rows are mixed data types. The first column is a date/time such as Mar 1, 2002 12:01 pm. The remaining columns are numeric data. I can't seem to get my data to plot properly in an XY chart from memory and am having problems parsing the data with mixed data types in the data r
    ows. The format I am using works great for viewing the history files in Excel.
    When I plot the data, I either get a single point or a a series of points for a single reading of all channels or I get a line connecting all data for that single scan reading. What am I doing wrong? At this point, I don't care if I read the data from the file to plot it or if I can just get Labview to plot correctly as the data is gathered without going to the history file.
    As noted in the summary question, I have embedded loops in my applicaiton. I have a while-loop that determines the scan rate and keeps the program running until it is turned off. Inside of that, I have a for-loop (in a subVI) which scans all my data channels.
    Thanks for your help.

    s to periodically read multiple channels of similar data? (multi-Y versus specified time) The plot just becomes a point or a single plot of all values taken at one scanning of all channels. I want multiple plots over time updated at the time of scanning.XY plots expect a cluster containing two 1D arrays for the X and Y
    coordinates of the individual points. If you want multiple plots you can
    supply an array of these clusters but you have to resupply the "x" array
    for each of them.
    Hope that helps,
    Rudolf
    Adrien wrote:
    : How do I get an XY Chart to display properly while using embedded
    : loops to periodically read multiple channels of similar data? (multi-Y
    : versus specified time) The plot just becomes a point or a single plot
    : of all values taken at one scanning of all channels. I want multiple
    : plots over time updated at the time of scanning.
    : I have also stored my data in a daily text file that is tab delimited.
    : The text files consists of a row of text column headers, a blan
    k row
    : and then rows of data. The data rows are mixed data types. The first
    : column is a date/time such as Mar 1, 2002 12:01 pm. The remaining
    : columns are numeric data. I can't seem to get my data to plot
    : properly in an XY chart from memory and am having problems parsing the
    : data with mixed data types in the data rows. The format I am using
    : works great for viewing the history files in Excel.
    : When I plot the data, I either get a single point or a a series of
    : points for a single reading of all channels or I get a line connecting
    : all data for that single scan reading. What am I doing wrong? At
    : this point, I don't care if I read the data from the file to plot it
    : or if I can just get Labview to plot correctly as the data is gathered
    : without going to the history file.
    : As noted in the summary question, I have embedded loops in my
    : applicaiton. I have a while-loop that determines the scan rate and
    : keeps the program running until it is turned off. Inside of
    that, I
    : have a for-loop (in a subVI) which scans all my data channels.
    : Thanks for your help.

  • OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

    Hi All,
    I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
    Error infor are as follows:
    The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    JNDI Name for the Database pool: eis/DB/soademoDatabase
    JNDI Name for the Data source: jdbc/soademoDatabase
    I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
    Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
    Login info in RetrievePersonService-or-mappings.xml
    <login xsi:type="database-login">
    <platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
    <user-name></user-name>
    <connection-url></connection-url>
    </login>
    jca file content are as follows:
    <adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
    <endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
    <interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
    <property name="DescriptorName" value="RetrievePersonService.PersonT"/>
    <property name="QueryName" value="RetrievePersonServiceSelect"/>
    <property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
    <property name="ReturnSingleResultSet" value="false"/>
    <property name="GetActiveUnitOfWork" value="false"/>
    </interaction-spec>
    </endpoint-interaction>
    </adapter-config>
    RetrievePersonService_db.wsdl are as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
    <WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
    <WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
    <WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
    <WL5G3N0:operation name="RetrievePersonServiceSelect">
    <WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
    <WL5G3N0:input>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:input>
    <WL5G3N0:output>
    <WL5G3N2:body use="literal"/>
    </WL5G3N0:output>
    </WL5G3N0:operation>
    </WL5G3N0:binding>
    <WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
    <WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
    <WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
    </WL5G3N0:port>
    </WL5G3N0:service>
    </WL5G3N0:definitions>
    Any suggestion is appricated .
    Thanks in advance!
    Edited by: user11262117 on Jan 26, 2011 5:28 PM

    Hi Anuj,
    Thanks for your reply!
    I found that the data source is registered on server soa_server1 as follows:
    Binding Name: jdbc.soademoDatabase
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 80328036
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
    Binding Name: jdbc.SOADataSource
    Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
    Hash Code: 92966755
    toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
    I don't know how to determine which server the DBAdapter is targetted to.
    But I found the following information:
    Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
    Outbound Connection Pool Server State Current Connections Created Connections
    eis/DB/SOADemo AdminServer Running 1 1
    eis/DB/SOADemo soa_server1 Running 1 1
    eis/DB/soademoDatabase AdminServer Running 1 1
    eis/DB/soademoDatabase soa_server1 Running 1 1
    The DbAdapter is related to the following files:
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
    C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
    I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
    <?xml version="1.0"?>
    <weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    <outbound-resource-adapter>
    <default-connection-properties>
    <pool-params>
    <initial-capacity>1</initial-capacity>
    <max-capacity>1000</max-capacity>
    </pool-params>
    <properties>
    <property>
    <name>usesNativeSequencing</name>
    <value>true</value>
    </property>
    <property>
    <name>sequencePreallocationSize</name>
    <value>50</value>
    </property>
    <property>
    <name>defaultNChar</name>
    <value>false</value>
    </property>
    <property>
    <name>usesBatchWriting</name>
    <value>true</value>
    </property>
    <property>
    <name>usesSkipLocking</name>
    <value>true</value>
    </property>
    </properties>
              </default-connection-properties>
    <connection-definition-group>
    <connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
    <connection-instance>
    <jndi-name>eis/DB/SOADemo</jndi-name>
              <connection-properties>
                   <properties>
                   <property>
                   <name>xADataSourceName</name>
                   <value>jdbc/SOADataSource</value>
                   </property>
                   <property>
                   <name>dataSourceName</name>
                   <value></value>
                   </property>
                   <property>
                   <name>platformClassName</name>
                   <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
                   </property>
                   </properties>
              </connection-properties>
    </connection-instance>
    </connection-definition-group>
    </outbound-resource-adapter>
    </weblogic-connector>
    Then I decided to use eis/DB/SOADemo for testing.
    For JDeveloper project, after I deployed to weblogic server, it works fine.
    But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
    BEA-380001: Invoke JCA outbound service failed with application error, exception:
    com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    ; nested exception is:
    BINDING.JCA-11622
    Could not create/access the TopLink Session.
    This session is used to connect to the datastore.
    Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [jdbc/SOADataSource].
    Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
    You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
    It almost drive me crazy!!:-(
    What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
    ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  • Getting a Page Cannot be Displayed error while uploading a Contract Document in SAP E-sourcing for size 500mb

    Hi Guys,
    I am getting a Page can not be displayed error while uploading a COntract Document in SAP-E-soucing 7.0.
    Maximum Size set in Our SYSTEM is :9765MB.
    Approx size of the Document tried is more then 300MB.
    Appreciate your help on this.
    Regards
    Tarun

    Hi Tarun,
    Please check the below system properties using system user login
    attachments.maxSizeKB.buyers - "Maximum size in KB of a employer-attached attachment file"
    attachments.upload.enable.buyers-  " Enable/Disable uploading of attachments by internal users"
    Also Please check with other attachment, contracts related properties in the System.
    Let me know if this helps.
    Thanks,
    Raj.

  • Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

    Hi All,
    I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
    Error: 1 (Field level error)
      SegmentID: NTE
      Position in TS: 70
      Data Element ID: NTE02
      Position in Segment: 2
      Data Value:
      3: Too many data elements
    For Eg: NTE*GEN*My Text *goes here
    Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
    Can it be done?
    Thanks.

    Sorry, no.
    X12 does not support an escape character so whatever is used for delimiters become reserved characters.
    If you want to allow '*' in the data, you will have to chooser a different Element delimiter.  The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

  • 3-1674105521 Multiple Paths error while using Bridge Table

    https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
    Customer Smiths Medical International Limited
    Description: Multiple Paths error while using Bridge Table
    1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
    2. They found found out by adding these 3 joins, they ended with circular error.
    [nQSError: 15001] Could not load navigation space for subject area GXODS.
    [nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
    In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
    3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
    Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
    Thanks
    Teik

    The strange thing compared to your output is that I get an error when I have table prefix in the query block:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
    ORA-38500: Unsupported operation: Oracle XML DB not present
    Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
    And if I remove it, it works:
    Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
    Starting "SYSTEM"."SYS_IMPORT_FULL_01":  system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
    Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
    . . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
    Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
    Nicolas.
    PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

  • Run time error while using Class gcl_error

    Hi All,
    I am getting run time error while using class gcl_error
                                          type REF to zsreport_error_handling:
    '' Attempt to access a component using 'NULL' object reference (points to nothing).
    An object reference must point to an object ( an instance of a class) before you can use it to access components ( variable : ''GCL_ERROR'').
    Either the reference point has not yet been set or it has been reset to 'NULL' by a clear statement."
    Can you please suggest any solution for this ?
    Thanks in advance.

    Dear All
    Its Resolved Thanks For your Valuable time Support
    INCLUDE LV03VFB4 inside below code trigger error.
    PERFORM VVBBD_AUFBAUEN USING WA_AVBBD
                                        WA_AVBBD-APOMOBILE
                                        DA_SUBRC
                                        DA_UPDKZ
                                        DA_VVBBD_TABIX
                                        0.
    This Was the Error some how 0 was there we are removed the 0 now it is working fine
    Rgds
    Thomson

  • Error while using pt:standard.choose tag

    Hi,
    I am getting error while using the ALUI 6.5 Adaptive tags. The details are given below. Can anyone help?
    The code I am using is
    <pt:standard.choose>
                   <pt:standard.when pt:test="stringToACLGroup('user=13009;').isMember($currentUser)">
                        <div class="ali-portlet-controlone">Adit</div>
                        <pt:logic.value pt:value="$currentUser"/>
                        <pt:logic.value pt:value="checking Tags"/>
                   </pt:standard.when>
              </pt:standard.choose>
    Also I checked for the variable $currentUser and it was displaying null so I set the variable as
    <pt:logic.variable pt:key="currentUser" pt:value="13009"/>
    I aslo checked by giving the group id in stringToACLGroup('group=301;') but same result.
    The stack trace is ::
    <!--Error displaying tag when in library standard. String index out of range: -19: com.plumtree.openfoundation.util.XPIndexOutOfBoundsException: String index out of range: -19
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:403)
         at com.plumtree.openfoundation.util.XPException.GetInstance(XPException.java:350)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:165)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173
    Caused by: java.lang.StringIndexOutOfBoundsException: String index out of range: -19
         at java.lang.String.substring(String.java:1938)
         at com.plumtree.taglib.standard.WhenTag.DisplayTag(WhenTag.java:72)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.standard.ChooseTag.DisplayTag(ChooseTag.java:110)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfFalseTag.DisplayTag(IfFalseTag.java:75)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.IfTag.DisplayTag(IfTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.core.HTMLTag.DisplayTag(HTMLTag.java:78)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.plumtree.taglib.logic.ForEachTag.DisplayTag(ForEachTag.java:162)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.portletpage.PortletRegionDisplayTag.DisplayTag(PortletRegionDisplayTag.java:91)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:243)
         at com.plumtree.portalpages.browsing.myportal.MyPortalDP.PageDisplay(MyPortalDP.java:166)
         at com.bea.alui.taglib.basepage.ContentTag.DisplayTag(ContentTag.java:71)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.ProcessTagBody(TagHelper.java:124)
         at com.plumtree.portaluiinfrastructure.tags.ATag.ProcessTagBody(ATag.java:401)
         at com.bea.alui.taglib.basepage.PageBodyTag.DisplayTag(PageBodyTag.java:135)
         at com.plumtree.portaluiinfrastructure.tags.helper.TagHelper.DisplayTag(TagHelper.java:1231)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.TagDisplayElement.Display(TagDisplayElement.java:145)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.CompositeDisplayElement.Display(CompositeDisplayElement.java:66)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ExecuteTags(DisplayTree.java:235)
         at com.plumtree.portaluiinfrastructure.tags.displaytree.DisplayTree.ProcessTagMarkup(DisplayTree.java:39)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessLayout(LayoutDisplay.java:24)
         at com.plumtree.portaluiinfrastructure.layout.impl.LayoutDisplay.ProcessMainPageLayout(LayoutDisplay.java:44)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:240)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.DisplayLayout(PlumtreeDP.java:219)
         at com.plumtree.portalpages.common.uiparts.PlumtreeDP.Display(PlumtreeDP.java:151)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleDisplayPage(Interpreter.java:2140)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.HandleRequest(Interpreter.java:657)
         at com.plumtree.uiinfrastructure.interpreter.Interpreter.DoService(Interpreter.java:190)
         at com.plumtree.uiinfrastructure.web.XPPage.service(XPPage.java:300)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3495)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Edited by: user590322 on Oct 29, 2009 12:22 AM

    Proper usage:
    <pt:standard.choose>
    <pt:when pt:test="stringToACLGroup('user=1;').isMember($currentuser)">
    ... secret administrator content ...
    </pt:when>
    </pt:standard.choose>
    Note that it's pt:when and not pt:standard.when. Also, Joel is right -- I think $currentuser is case sensitive.
    Chris Bucchere
    http://bucchere.com
    http://twitter.com/bucchere

  • Error while using UTL_FILE package

    I am getting error while using UTL_FILE package in apex 3.0 version
    Pls help me out.

    ok, how are you using UTL_FILE and what is the error?

  • Runtime Error while using Dynamic Selection

    Hi,
      We are getting a runtime error while using a dynamic selection. One of the fields has got an apostrophe in the middle of the text and so the condition is returning an error SAPSQL_WHERE_PARANTHESES.
      Let's say the value in the field is SCV's. So the WHERETAB is filled as 'SCV's' or `SCV's`. An exception is caught in this case as there is no closing apostrophe.
    Let us know if anyone has come across a similar issue and any help is appreciated.
    Regards,
    Sarves

    Hi Sarves,
    as Rob said.
    check also the [ORACLE FAQS|http://www.orafaq.com/faq/how_does_one_escape_special_characters_when_writing_sql_queries] or [SQL SERVER u2013 How to Escape Single Quotes|http://blog.sqlauthority.com/2008/02/17/sql-server-how-to-escape-single-quotes-fix-error-105-unclosed-quotation-mark-after-the-character-string/]
    Honestly: Before posting here and getting a whole lot of more or less useless comments just use your favorite search engine.
    Regards,
    Clemens

  • Error while using mxml taglib in jsp

    Hi,
    I am getting following error while useing the mxml taglib in
    jsp for flex 2.0.1,
    java.lang.NullPointerException
    flex.webtier.server.j2ee.jsp.MxmlTagImpl.doStartTag(MxmlTagImpl.java:112)
    flex.bootstrap.BootstrapTag.doStartTag(BootstrapTag.java:77)
    org.apache.jsp.test_jsp._jspx_meth_mm_005fmxml_005f0(test_jsp.java:79)
    org.apache.jsp.test_jsp._jspService(test_jsp.java:54)
    org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:328)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    My jsp as below,
    <%@ taglib uri="FlexTagLib" prefix="mm" %>
    <html><body>
    <mm:mxml source="reports/sampleapp.mxml" />
    </body></html>
    If any one knows how to resolve above error, please help me,
    My email id : [email protected]
    Regards,
    Chandra Reddy

    did u deploy your dbadapter through console to the plan mentioned for deployment?

  • Error while using wbutil Client_OLE2.create_obj('Excel...ora-06508

    I am facing ora-06508 error while using webutil. Have done all setup as per "How to Configure Webutil in Forms 11g ".
    Error on following statement "Client_OLE2.create_obj('Excel.Application')"
    FRM-40375, ORA-06508.
    Waiting for Help.
    Thanks;
    Edited by: umairm on Apr 20, 2012 10:16 AM

    Hi
    It is mentioned in webutil doc that, you must regenerate webutil.pll before using it; otherwise you’ll encounter error ORA-06508 when running a form with the attached library.
    Hope this helps...
    Regards,
    Amatu Allah

Maybe you are looking for

  • Acer Laptop stuck at "Setup is Starting Services," can't move on AT ALL!

    Hi! I've been having a serious issue with my Acer Aspire (Windows 7) laptop since around 3am last night. Before I go on, please note that I have been searching for solutions before posting this question, and none of what I've found matches my situati

  • APP-RG-09518: An error occurred while creating a database link

    Hi All, While creating a database link in Oracle EBS from one instance to another instance for transferring FSG reports Go to Any GL Setup responsibility...Setup>System>Database links > Create new database link Prior to the above...below steps should

  • How to go from multiple chapters ONE timeline to the menu

    Recently had to convert a VHS to a DVD, where the file given to me was 1 Mpeg of the entire VHS capture. Not only that, but there were many interstitial segments which they didn`t want shown on the dvd. Last but not least, the order of sections on th

  • R7770-PMD1GD5 got a problem with assassin's creed 3

    bought this card and got this problem with max setting. This happens when I turn AA to very high. What is the problem?

  • [solved] Printing via Cups fails

    Hello Community, software: extra/poppler 0.20.0-1 [installed] extra/cups 1.5.3-4 [installed] extra/cups-filters 1.0.18-2 [installed] aur/cups-xerox 2008.01.21-1 [installed] for some days I have some bad problems with my two printers (a dell and a xer