How to display field values in long text of messages....
Hi,
Currently iam doing an userexit. In that i want to display error messages. and if we click on message it will display the long text. My question is i want to display field values in the long text. Under the long text's &system_response& i want to display a field value.
Regards
chinna
Hi Chinna,
Within short and long texts, you can use placeholders, which can be replaced with the content of data objects using the MESSAGE statement. A maximum of four character-type placeholders are permitted; they are indicated by #&i# in short texts, and by #&Vi&# in long texts, where i = [1, 4]. If #&# itself is to be displayed as part of the text, it must be specified as #&&# in short texts and as "&" in long texts.
To add some detail on how to create variables in Long text, you have to go to 'commands' and in symbol option provide the variables like
&V1& &V2& and so on.
Hope this helps you.
revert for further clarification.
<b>Alwyas reward Points to useful suggestions.</b>
Regards,
Vikas
Message was edited by:
Vikas Taneja
Similar Messages
-
How to display field value in header text?
Hi Experts,
In va03, the client wants some number in the header text which is stored in vbak. Please tell me:
1. Which method should I use in BADI?
2. How to display in header text?
Regards
ManiHi Kiran,
Thanks for the prompt reply. How can I display some hard code like 'Test' in the header text in va03.
Text name = 0000001252
Language = EN
Text ID = Z001
Text object = VBBK
READ_TEXT is used to get the values from the header text, but how to set the values?
Regards
Mani -
How to display field value only once in REUSE_ALV_GRID_DISPLAY
hi experts,
i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve itHi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
carrid TYPE sflight-carrid, " Carrier Id
connid TYPE sflight-connid, " Connection No
fldate TYPE sflight-fldate, " Flight date
seatsmax TYPE sflight-seatsmax, " Maximum seats
seatsocc TYPE sflight-seatsocc, " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
STANDARD TABLE
OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight. " Getting data for display
PERFORM create_field_cat. " Create field catalog
PERFORM alv_display.
*& Form create_field_cat
Subroutine to create field catalog
There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING 'Carrier Id' 'CARRID' '2'.
PERFORM fill_fieldcat USING 'Connection No' 'CONNID' '1'.
PERFORM fill_fieldcat USING 'Flight Date' 'FLDATE' '3'.
PERFORM fill_fieldcat USING 'Maxm.Seats' 'SEATSMAX' '4'.
PERFORM fill_fieldcat USING 'Seats Occ' 'SEATSOCC' '5'.
ENDFORM. "create_field_cat
*& Form fill_fieldcat
Subroutine to fill data to field column
-->p_seltext Column label
-->p_fieldname Fieldname of database table
-->p_col_pos Column position
FORM fill_fieldcat USING
p_seltext LIKE fs_fieldcat-seltext_m
p_fieldname LIKE fs_fieldcat-fieldname
p_col_pos LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM. " fill_fieldcat
*& Form get_data_sflight
Subroutine to fetch data from database table
There is no interface parameter
FORM get_data_sflight .
SELECT carrid
connid
fldate
seatsmax
seatsocc
FROM sflight
INTO TABLE t_sflight
WHERE carrid IN s_carrid.
ENDFORM. " get_data_sflight
*& Form alv_display
Subroutine for ALV display
There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
it_fieldcat = t_fieldcat
TABLES
t_outtab = t_sflight
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_display
End of code -
How to display 7 values of single field in row wise.
hi,
how to display 7 values of single field in row wise.
thankx in advance.hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit -
How to display negative values in a screen field of a screen
Hi All,
Please let me know how to display negative values in a screen field of a screen.
thanksHi Kishore,
You can do this method. In the screen , create a text field of CHAR instead fo creating an INT4 field.
I have created a field of CHAR of name say TEXT.
In the main program,
declare a variable of the same name ie. TEXT.
data: TEXT(5) TYPE C.
In PBO, just assign the negative values.
It will work.Since there is automatic conversion between character and integer data types, it will work for positive values as well.
Regards,
Sylendra. -
How to update field values in a database table using module pool prg?
hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidyaHI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
v_kun_high like ZCUST_CALL_REC-kunnr,
v_bud_low like ZCUST_CALL_REC-budat,
v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of itab.
*data:begin of Jtab occurs 0,
MANDT LIKE ZCUST_CALL_REC-MANDT,
kunnr like ZCUST_CALL_REC-kunnr,
budat like ZCUST_CALL_REC-budat,
code like ZCUST_CALL_REC-code,
remarks like ZCUST_CALL_REC-remarks,
end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*& Module USER_COMMAND_9000 INPUT
text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
perform update on commit.
WHEN 'DELETE'.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9002'.
ENDCASE.
ENDMODULE. " USER_COMMAND_9000 INPUT
*& Module STATUS_9000 OUTPUT
text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_9000 OUTPUT
*& Module USER_COMMAND_9001 INPUT
text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9001 OUTPUT
text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9002 INPUT
text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'UPDATE'.
perform move_data.
UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
ENDIF.
WHEN 'DELETE'.
perform move_data.
DELETE ZCUST_CALL_REC FROM TABLE ITAB.
IF SY-SUBRC = 0.
MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
ELSE.
MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
ENDIF.
endcase.
endmodule. " USER_COMMAND_9002 INPUT
*& Module STATUS_9002 OUTPUT
text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule. " STATUS_9002 OUTPUT
*& Module update_table OUTPUT
text
module update_table output.
move itab-MANDT to zcust_call_rec-MANDT.
move itab-kunnr to zcust_call_rec-kunnr.
move itab-budat to zcust_call_rec-budat.
move itab-code to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule. " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
table itab
WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_high
IMPORTING
OUTPUT = r_kunnr-high.
r_kunnr-option = 'BT'.
r_kunnr-sign = 'I'.
append r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND NOT v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND NOT v_kun_high IS INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_kun_low
IMPORTING
OUTPUT = r_kunnr-low.
r_kunnr-SIGN = 'I'.
r_kunnr-OPTION = 'EQ'.
APPEND r_kunnr.
PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
AND v_kun_low IS INITIAL
AND v_kun_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
CALL SCREEN '9000'.
ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'BT'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND NOT v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
r_budat-low = v_bud_low.
r_budat-high = v_bud_high.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND NOT v_BUD_high IS INITIAL.
r_budat-HIGH = v_bud_HIGH.
r_budat-option = 'EQ'.
r_budat-sign = 'I'.
append r_budat.
ELSEIF R_BUDAT IS INITIAL
AND v_BUD_low IS INITIAL
AND v_BUD_high IS INITIAL.
IF SY-SUBRC = 0.
MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
CALL SCREEN '9000'.
r_budat-low = ''.
r_budat-option = ''.
r_budat-sign = ''.
ENDIF.
ENDIF.
ENDFORM.
*& Form update
text
--> p1 text
<-- p2 text
form update .
commit work.
endform. " update
*& Form move_data
text
--> p1 text
<-- p2 text
form move_data .
clear itab.
refresh itab.
move-corresponding zcust_call_rec to itab.
MOVE ZCUST_CALL_REC-MANDT TO ITAB-MANDT.
MOVE ZCUST_CALL_REC-KUNNR TO ITAB-KUNNR.
MOVE ZCUST_CALL_REC-BUDAT TO ITAB-BUDAT.
MOVE ZCUST_CALL_REC-CODE TO ITAB-CODE.
MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
APPEND ITAB.
delete itab where kunnr is initial.
endform. " move_data
thanks in adv
vidya -
How To Print Field Value in TOP-OF-PAGE During Line Selection.
How To Print Field Value in TOP-OF-PAGE During Line Selection when double click on field.
(If my memory serves me well (not used for long time ago)
Assign values to system fields sy-tvar0 - sy-tvar9, they will replace the placeholders "&0" through "&9" in the list headers and column headers.
TOP-OF-PAGE DURING LINE-SELECTION.
WRITE: / 'Interactive Report &3'.
WRITE record-vbeln TO sy-tvar3.
Regards,
Raymond -
How to display field information dynamically in reports
How to display field information, depending on the description in DOMAINS..dynamically in reports...
give an example.
ThanksHi
the text u should take into the internal table for that and
it should send into the ALV_GRID_DISPLY
SLIS_FIELDCATALOG_T_ALV-SELECTION_TEXT = " DOMAIN".
other wise u should set in the write statement
write : / ' '. -
How to add field value to the standard table
Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod. -
How to display filter values in analyzer
Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it. -
How to display the value of a column in a chart at the top of each column
How to display the value of each column in a chart at the top of each column?
Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry -
How to Search document by using Long text description contents in SAPEasy DMS
Hi,
How to Search document by using Long text description contents in SAPEasy DMS
Regards,
Shrikant ShindeHi Alfredo,
Thanks for reply..Will you please explain in brief what are the OCR program and workflow.
Will you please send me any docs on [email protected]
Thanks
shiv. -
How do I convert a very long text message into a multimedia message
How do I convert a very long text message into a multimedia message
Well, you didn't mention Mac, but to my knowledge, TouchCopy works on both platforms. And, my understanding of the OP was to send each one individually, whereas WiseJD was referring to selecting them all so you could copy them all and send, rather than emailing each individual piece.
It wasn't that I thought it was rude, but that it was a complaint about something that someone said a year ago. You did not come here to ask a question, or indicate at all that you were looking for a solution to a similar question. It was just that you came on, slammed a response and left it at that. Those of us that take the time to answer people's questions as volunteers and users just like you. If you spend a great deal of time here, you will see a lot of different types of questions/comments that can get on your nerves. Here is a link for TouchCopy and it does work on both platforms. http://www.wideanglesoftware.com/touchcopy/ -
How to set field value in workflow SPD2013?
Hi All,
how to set field value in workflow SPD2013? Actually using Infopath, i need to update a field value through workflow.(Little differnt from SPD2010). How to do this?As Amit says, some elaboration here would be good. You can use InfoPath as a form for either a list or a library and then set it to trigger a workflow upon item creation. The workflow will consist a number of actions, one of which is the Update
Field Item.
More information on the available steps can be seen here.
http://msdn.microsoft.com/en-us/library/office/jj164026.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
Please tell me how to go back to a long text I wrote and then i must have accidentally swiped the screen one way or another. How do I go back to the screen so I don't have to re-write the whole text?
Cloud takes over https://forums.adobe.com/thread/1584746 may help
Maybe you are looking for
-
Display previous month value in report
Hi, I have a requirement to display the previous month amounts on monthly basis. here is the example. In the Cube I have data like this: <b>Customer Month Amount</b> C1 Jan 2004 $500 C1 Feb 2004 $600 C1 Ma
-
How does one mount , inspect , verify , and possibly repair a Time Capsule hard drive with Disk Utility ? My 500Gb 1st gen Time Capsule ( used wireless with Airport) has quit backing up new data . ( iMac Core2Duo, Snow Leopard) . TC says it need
-
When I try to add Elements as a plugin it says an error occurred and will not allow mr to add it. When I installed LR I didn't do anything to add NIK but it is there as a plugin.
-
Property not Writable on type exception
I found another post about this problem but the reply was Sorry, I have solved the problem. I am using JBoss 4.2.1.GA, Facelets and jboss-seam-CVS.2007-09-17_01-34-40. I am trying to do this. <h:form> <h:panelGrid id="lpg_01" binding="
-
I created another view in my base form and now need the ability for the user to go directly to that view. Any ideas? Another issue I have is I created additional fields in my main list and not all of the fields are being displayed in InfoPath. What