How to display Hierarchy Variable in BI 7.0 WAD

Hi Experts
I have a variable for Cost Center which is a Hierarchy Variable and not a Hierarchy Node Variable. I am using BI WAD 7.0 and my requirement is that the user wants to see for what Hierarchy s/he ran for.
I am using a Information Web Item whihc is under Advanced tab. After dragging that I check the box for Variables so that the user see all the variables he ran for and after s/he prints its more precise report.
My problem is I cant see the Hierarchy variable value in my Web Template ....I can see at the variable POP UP screen I enter my Hierarchy but after executing it I dont see my Hierarchy variable value.
Your suggestions will be reciprocated with Points.
Thanks

Hello Experts,
To substantiate my earlier question ...I have 3 Hierarchies for 0COSTCENTER
In the WAD under the Information Web ITem i check the box for
Display Variables (VARIABLES_VISIBLE)
I have 3 variables
1) Hierarchy Variable : user will pick 1 out of 3 Hierarchy
(not a node but entire Hierarchy)
2) Fiscal Year/period
3) Value type
But I can see only 2 variables after the Web template is executed , the user wants to see for what hierarchy it ran when it prints the report
Your suggestions are supremely appreciated
Thanks
Nick

Similar Messages

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130. "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for "ASSIGN FFeld+o(l) TO " '
 TO SY-TITLE.
 Declaration of variables **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8) TYPE F VALUE '1022333'. "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2) TYPE N. "Here slack bytes are (DW border)
 "necessary
 "If you like computing error, please uncomment the above
DATA: FFELDX(8) TYPE F VALUE '7777777'.
DATA: FFELDA(8) TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
 Main Section *******************
 SKIP.
 WRITE: /5 'Example 1 **** inadmissible ASSIGN ***' COLOR 6.
 WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
 ULINE.
 SKIP 2.
 SKIP.
ASSIGN FFELD8+8(8) TO <FS1>. "<-- Assigning of variable FFELDX !!
 BREAK-POINT.
 WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
 COLOR 3.
 WRITE: /5 'Example 2'.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of FFELDX :', FFELDX.
 ULINE. SKIP 2.
 SKIP.
ASSIGN FFELD8+16(8) TO <FS1>. "<-- Assiging a few FFELDA to <FS1>
 BREAK-POINT.
 WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
 COLOR 3.
 WRITE: /5 'Example 3'.
 WRITE: /10 'Content of FFELDA :', FFELDA.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of FFELDA :', FFELDA.
 ULINE. SKIP 2.
BREAK-POINT.
 DO 4 TIMES.
 ASSIGN FFELD8+OFFX(LENX) TO <FS1>. "Zuordnung auf OFFX zu <FS1>
 WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
 COLOR 5.
 WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
 ULINE. SKIP 2.
 ADD 8 TO OFFX.
 ENDDO.
 Subroutines *******************
 Display of data fields and field symbols *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD 111 TO <FS1>. "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
 Determination of field properties (only for information) *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display a variable in the report?

hi all
i want to use one complex sql statement which will return only one value and i need to display it in report. i'm new to OBIEE. i thought of creating a repository variable to hold that value. but im not sure of how to display the variable in the report.
Any idea?
Your help is appreciated

Hi where do you want to show that value in answers i mean in which part of answers, you want to show that?
see this
http://bischool.wordpress.com/2009/05/05/presentation-variable-values-in-report-titles-or-using-presentation-variable-in-dashboard-text-object-and-narrative-view-directly/
also see this to where and how to use variables in answers
http://shivabizint.wordpress.com/2008/10/02/oracle-bi-ee-variables-overview/

How to create Hierarchy Variable

Hi,
Can any one please tell me (step by step) how to craete Hierarchy Variable for Prod Hierarchy?
Please do not give help.sap.com link..its very confusing and did not help me at all.
Thanks

Hello Shalini,
         You need to follow the below steps
For hierarchy
1)     To create a hierarchy variable, you need to select the characteristic with the hierarchy. Go to the hierarchy tab in the object properties. Select hierarchy -> Hierarchy variable.
2)     Go to select hierarchy variable and new variable.
3)     Give technical name and description, and other details as per requirement.
4)     Save the variable and select the variable.
For Hierarchy node variable
1)     To create a hierarchy node variable, Select a characteristic which has a hierarchy. Select Restrict from the context menu. Select Variable in the Select value list box. Select create new variable.
2)     Give technical name and description and other details as per requirement. Select type of variable as HIERARCHY NODE
3)     Save and select the variable.
Hope this helps,
Regards.

HOW TO DISPLAY A VARIABLE

hi friends,
I have a variable in wk_matnr value is 'MATERIAL123'.
How to display this variable like Material No :-MATERIAL123
How to code for this in BSP.
Moosa

Hi,
To display any variable in BSP.
you need to do this:
<%= varibale name %>
For your variable,
<%= wk_matnr %>
OR
<htmlb:label for = "wkm"
text = "Material No" />
<htmlb:text id = "wkm"
text = "<%= wk_matnr %>" />
Hope this is helpful.
Regards,
Abhinav

In BEx, how to display hierarchy Upper Node with selected Lower Nodes only

Currently I am displaying the Cost Centre (GFL Responsibility Cost Centre) hierarchy in a workbook. I want to be able to filter on this hierarchy dynamically. E.g. the upper node must be displayed including the rolled up results for this node, together with a selection of the lower nodes e.g 2 nodes ( not all the lower nodes related to the upper node must be displayed in the query).
What's possible when filtering :
To filter on the 2 lower nodes only ( results are displayed as required)
Not possible:
When I include the higher node of the 2 lower nodes in the query, All the lower nodes of the higher node are displayed, and the filter selection of the lower nodes are over written.
This is logically what's expected when the higher node is included in the filter.
Creating a hierarchy variable gives the same problem, I am not able to filter on the hierarchy nodes as required.
 Upper Node
 Lower Node1 LowerNode2 LowerNode3
Filter the report for UpperNode and LowerNode 2 & 3 only
Thanking YOU in advance. Will reward points for the correct help

Hi
Do you want to show particular node or particular level ?
If you want particular node , then create hierarchy node variable and restrict to that node ( 3rd node)
If you want particular level, what does that mean say i am taking employee hierarchy and the hierarchy is as below.
Ihe setting that we have is to expand upto n levels but if yiou say i need level 2 what does that mean and how do you want to show in report ?
 A -
(level 1)
 B,C,D( --child of A ) --- level 2
 E(Child of B), F(Child of C) -
level 3.
Regards
vamsi

How to use hierarchy variable.

Hi all ,
In 0Account I have four hierarchies , please tell me how can I use all these 4 hierarchies in a single BEx query.
Presently I am able use only one hierarchy .
With regards

Hi,
If u want the user to be able to choose 1 of the 4 hierarchies, in the hierarchy tab of the properties of 0ACCOUNT in BEx Query Designer, click on the white button beside "Select Hierarchy" and then on the white button present against the drilldown for Hierarchy Variables. Create a new variable there & then select it from the drilldown. You should then be able to use the variable & select 1 of the 4 hierarchies.

How to display presentation variable in a column

Hi all....I have to display presentation variable in a column...
I tried placing @{variable_name} in column formula..
But it is displaying a value 0 ..where the variable carries a date value.
Any suggestions?

Take a look at this blog: http://gerardnico.com/wiki/dat/obiee/presentation_variable
Try it out by providing a default format.
Thanks,
BIPuser

How to display the variables in the specified manner?

We need to display some variables in an array in the horizontal order with backslash between the variables using a For loop in XML
For Example
Variable 1 / Variable 2 / Variable 3
Could someone provide valuable suggestions on the same.
Regards,
Sudeep.

Not sure if I understood the question, do you mean you want to display variables as output, where in the logic runs in a loop while reading the XML data and creates an array of data separated by backslash? You can always concatenate the variables similar to string concatenation.

How to display Hierarchy in WDA Search help

Hello Experts,
Please let me know if i can display hierarchy (tree like structure) in WD ABAP search help,i am quite new to WD ABAP.
Any suggestions and inputs would be very helpful.
Thanks & Regards,
Siddharth

I think tree UI element will be useful to you. Pls refer following links for more help:
[Link1|http://help.sap.com/saphelp_nw70/helpdata/en/21/ad884118aa1709e10000000a155106/content.htm]
[Link2|http://help.sap.com/saphelp_nw70/helpdata/en/59/a98b411fb4b05fe10000000a1550b0/frameset.htm]
[Link3|http://help.sap.com/saphelp_nw70/helpdata/en/5a/088b41b4b3b25fe10000000a1550b0/frameset.htm]
I had similar requirement of search help in my project. I had created component with tree ui element and called it using component usage in another component on click of button. I hope this will help you.
Regards,
Saket.

How to display Hierarchy tree in F4 help ?

Hello All
Sorry , this time i have a pure ABAP question .I have requirement where i have to extract the cube data into a flat file as per user's selection selection screen.On selection screen , there are various characteristics of cube such as COmpany code , kind of business etc.This characteristics have both master data as well Hierarchy.User can select anything .If he selects hierarchy, then i have to show him hierarchy in F4 help.
HOw is this possible?Please let me know if anybody knows any clue regarding this.
Thanks and Regards
Yogesh Mali

Hi Yogesh,
You want to show the F4 funtionality in a report or an Abap program. If you have to show it in a query/report then right click on the characteristic ->properties -> click on the hierarchy list and you will find a option for variable. Create the variable and it will be a selection option when the user executes the query showing all the hiararchies available when F4 is pressed.
Bye
Dinesh

How to display a variable value in WAD?

I am using a replacement path variable to filter a report by project number. While this works fine, the project number is not easily visible (only via Filter -> Display All Filter Values and this only displays the description, not the key).
How can I display the key and the description of the project number variable at the top of the report?
Thank you,
Dennis

The first part is right -
1) drag a text element onto the page, at a location in which you want the variable value to be displayed
2) On the left hand bottom page - go to the web item properties for the text element
3) scroll down to the specific properties for the item - in that uncheck the first two check boxes - display general text elements & display static filter values
4) in the next item in the properties (List of text elements) click once on the box where List is written and then clcik on the small browse button that appears.
5) in the window that opens, in the element type field, select variable/variable value as key (as per your requirement) and then under the element ID field type in the technical name of your variable that you want to display.
click ok and save your template and try executing it.
See if this solves your problem.
regards,
Nikhil

How to display text variable of type customer exit

Hi to all,
I have created a query in query designer which display sales value according to plant.
There i have also used a variable which will take input from user and restricted on 0CALDAY.
I have also created 2 text variable to display the text for sales based on input in variable.
I need when user enter the 01.02.2010 - 31.12.2010 value in variable , text variable should display SALES FROM 01.02.2010 TO 31.12.2010
i knew how to do that by using text variable of processing type customer exit.
But display of text variable is like SALES FROM 01022010 TO 31122010 ,
But i need that SALES 01.02.2010 TO 31.12.2010
i shall be thankfull to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Dec 22, 2010 7:46 AM
Edited by: pavneet rana on Dec 22, 2010 8:03 AM

Hi,
Give Description on Sales Amount as SALES FROM &ZVAR_YEAR1& TO &ZVAR_YEAR2&.
ZVAR_YEAR1 & ZVAR_YEAR2 are the two text variables. These two variables should NOT be input enabled.
In the Exit - under I_STEP = 2, write the below code.
WHEN 'ZVAR_YEAR1'.
DATA:   l_s_range       TYPE rs_s_range,
               loc_var_range TYPE rrs0_s_var_range.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZVAR_INPUT_CALDAY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = loc_var_range-low.
APPEND l_s_range to e_t_range.
WHEN 'ZVAR_YEAR2'.
DATA:   l_s_range       TYPE rs_s_range,
               loc_var_range TYPE rrs0_s_var_range.
READ TABLE i_t_var_range INTO loc_var_range WITH KEY vnam = 'ZVAR_INPUT_CALDAY'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
l_s_range-low = loc_var_range-high.
APPEND l_s_range to e_t_range.

How to display a variable in the message

Hi all,
I am developing an application where I am parking a document, can anyone please tell me how can I display the document number on the web dynpro screen with the message once the document has been parked. So far I have written the following code but this is just for displaying a message only and not the number:
DATA lo_api_controller     TYPE REF TO if_wd_controller.
    DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
    CALL METHOD lo_api_controller->get_message_manager
      RECEIVING
        message_manager = lo_message_manager.
    CALL METHOD lo_message_manager->report_success
      EXPORTING
        message_text = 'Document has been parked.'

DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
data lv_document_number    type        string.
data lv_message_string        type        string.
lo_api_controller ?= wd_this->wd_get_api( ).
    CALL METHOD lo_api_controller->get_message_manager
      RECEIVING
        message_manager = lo_message_manager.
*** get document number in lv_document_number
lv_document_number = .....
*** form message string
concatenate 'Document has been parked : Document No :' lv_document_number into lv_message_string.
    CALL METHOD lo_message_manager->report_success
      EXPORTING
        message_text = lv_message_string.

How to display presentation variable in a narrative view

Is there any way that we can display the prompt value stored in a presentation variable in the narrative view?

Hi,
use this synatx @{PRESENTATION_VARIABLE}{'Default'}
Regards,
Gianluca

How to display Hierarchy Variable in BI 7.0 WAD

Similar Messages

Maybe you are looking for