How to display lead selection ONLY in the ALV

HI All,
   User would like display the selected records in ALV .
   i suggested that add two button - "Display ALL" & "Display Selected" .
   How can i only display the lead selection only in the ALV? or Hide un-selected records.
   Please help.
Thank you so much
Gordon

Hi,
Pelase have a look.. same requirement.
get_selected_elements method for ALV
Re: select rows in alv and show them in another alv in another view
Web dynpro ALV table copy selected row
cheers,
Kris.

Similar Messages

How to display grand total only on the last page of my report

Hello
I need to display the grand total amount of the invoice only on the last page of every report. If the report has 1 page then the grand total will be displayed on the 1st page. If the report has 2 pages then a subtotal will be displayed on the 1st page adding up all the amounts on page 1 only, and the grand total will be displayed on the 2nd page, adding up all the amounts of page 1 and 2. If the report has 3 pages then the a subtotal will be displayed on page 1 adding up all the amounts of page 1, and another subtotal on page 2 adding up all the amounts of page 2, and the grand total are displayed on page 3 adding up the amounts of every page.
supplier amount
xx 100
yy 100
subtotal 200
page 1 of 2 --here i need to display only the total amounts of page 1
supplier amount
subtotal brought forward 200 --then i need to bring total of page 1 over to page 2
qq 300
zz 300
total 800 --here i have reached the end of the report and
need to display the grand total
page 2 of 2
--Currently i am displaying this on my report
supplier amount
xx 100
yy 100
total 800 --this one gives the problem cause it displays the grand total
---------- on page 1 of 2 even before you can see the amounts on the
next pages
page 1 of 2
supplier amount
qq 300
zz 300
total 800

put the grand total in a frame and set it to print on the last page of the enclosing object.

How to display a field only in the last page

hi all
i am using reports 6i
i ve created summary column and i need to get it displayed only on the last page of the report
is it possible
kindly guide
thanking in advance

Dear Friend,
where you created the summary coloumn? If your summary column in at top level you can do this just placing summary field bottom all repeating frame (all frames).
Regards
Ahamed Rafeeque Cherkala

How to display group data only when the particular group is clicked

Hi frnds,
I want to design my report as follows:
Data is grouped by country, and for each country it is showing details for that country. I need to find out a way to display all group names first. E.g.
Argentina
Aruba
Australia
And on click of particular country name it should display its details below it
e.g.
-Argentina
     BBB            Mendoza          123456
+Aruba
+Australia
Has anyone done that before??? Is it possible to achieve it through Crystal Report Designer (2008)?? If yes then how???
A prompt reply would be appriciated as i need this information urgently.
Thanx.

Thanx Jehanzeb,
The sample u suggested did not solve my problem since it is opening the group data in new window.
My question is - can we show/hide group data by clicking on that particular group (under that group name).
e.g.
->(initial display - only groups)
+ Australia
+ America
+ Bhutan
->(on clicking a group)
+ Australia
\- America
abc    xyx    12213213    wqe9090
dsd    dcv     90eur90e    ifjjdioifdoi
+ Bhutan
In short, I am looking for on-demand display of records grouped by some field and the expansion of data must be done in the same page.
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:44 PM
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:45 PM
Edited by: Kuldeep Chitrakar on Aug 6, 2008 12:46 PM

How to display record selection settings in the result

Hi,
CR 2008 and 2013 are being used, but this is a rather general question.
We are generating different schedules using one source file. Depending on the filter setting on the data scope, say CURRRENTDATE or last month, daily or monthly reports are sent out.
The problem is, when there is no data included in the report, we would like to put a message in the report saying "There is no data found in the period xyz". But so far we haven't figured out how to retrieve the different filter settings in the schedules.
Is there a way to do this? I do hope we don't have to create different .rpt files just for different schedules.
Any suggestions and opinions are appreciated.

While, the reports can be run manually by the user with a prompt asking the range or scheduled on the server and sent out automatically without interaction.
For the latter case, the prompt for date range was written as optional. And the record selection looks like this:
IF (HASVALUE({?dFrom}) AND HASVALUE({?dTo}))
THEN
{a_table.dDate}>={?dFrom}) AND {a_table.dDate}<={?dTo}
With the user input, everything is ok. But while scheduling a report on the server, we set the prompt to EMPTY and control the range by using a filter. For a daily report, the record selection changes to
{a_table.dDate}= CURRENTDATE-2
Here comes the problem. Without being able to read this value into the report, we don't know how to show period xyz in an empty report, because a daily report could also query CURRENTDATE or CURRENTDATE-10, depending on the schedule. The same applies to monthly reports. People can schedule a report to run once a month, but still query just CURRENTDATE by mistake.
So the most reliable information is to read out what is set in the filter...

How to display properties of dimension on the input form and report in bpc

Dear Expert,
Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number.
thanks so much
hungth

Hi Hungh,
If your are using BPC 10 with EPM add in client, you can use the function:
EPMDimensionProperty ()
This function retrieves the properties of a specified dimension in a specified cell range.
Thanks, Safa

How to go for selective deletion if the request is rolled up???.. URGENT!!!

hi all,
we a have a data target which was compressed and rolled up...
please do suggest us how to go for selective deletion if the data target was rolled up???
on what basis we need to do the selective deletion ??
thanks for ur understanding...
suggestions would be highly rewarded
regards
Prince

Hi,
in the subsequent datatargets of your ODS:
if the requests are only rolled up, then you can delete those requests; now if your aggregates are collapsed then you'll have to dactivate them and reactivate them after. If not you can simply delete them.
then delete all the requests from your ODS up to the request right after the missing one. This will deactivate you ODS delta init. This is not a problem since when you'll have finished with the above your ODS and subsequent targets will have a consistent status in terms of data.
Reinit your ODS delta without datatransfer, reconstruct your missing request and the subsequent requests in your ODS.
Reactivate them (not all together as a single activation, but separately).
Then load the delta into your subsequent targets.
Now if the subsequent datatargets are collapsed then you'll have to either reinit with full load or selective delete them. the missing request in your ODS still must be reloaded before!
If you go for selective deletion you'll have to find the right selection criteria based on the data of your ODS. For instance if you can ensure that only a selected period is incorrect (all the ODS requests from the missing one to the last only contain data for JAN08) then you can selectively delete JAN08 from your subseq targets and perform a FULL load selecting JAN08 from your ODS.
Then perform an INIT without data transfer... you can then continue your deltas as usual....
hope this helps....
Olivier.

How to display a select query record in a tool tip?

hi,
How to display a select query record in a tool tip?
for example i have a report employee. when i move the mouse pointer over a employee name, the tool tip should display the respective department id, department name...of that employee name.
select dep_id, dep_name ....from department where employee.....Is it possible?
thanks

Dear Skud,
Yes its possible..select ''||ename||'' from emp
other wise you can use jQuery tooptip or some other JScript bundles.
Thanks and Regards
Maheswara

How to have a selection screen in the smartform

Hi,
How to have a selection screen in the smartform. Could anybody share with the example of driver program and the smart forms . Please send me ASAP
Thanks
Shiva shekar

Hi,
Refer to this
http://www.****************/Tutorials/Smartforms/SFMain.htm
Thanks,
Anitha

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
 if( i != (nSpotChannel - 1) )
 overlay[i].next = overlay + i + 1;
 else
 overlay[i].next = NULL;
 overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
 overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
 overlay[i].colBytes = 1;
 overlay[i].r = 230;
 overlay[i].g = 161;
 overlay[i].b = 174;
 overlay[i].opacity = 255;
 overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to display language key (0LANGU) in the query for BW report

Hi,
Can someone tell me how to display language key (0LANGU) in the query? I want to display which language (English or French) is used for material description in BW report. Thx.

hi,
check if the infoobject is kept as lang dependent or not for material text, else you need to create a masterdata attribute with text and lang keys and do corresponding mapping, so then it can be displayed in your report
regards
laksh

How to display my country flag on the task bar in osx mavericks?

How to display my country flag on the task bar in osx mavericks?

System Preferences > Keyboard > Input Sources
Checkmark the box beside "Show Input menu in menu bar".

I updated my I Phone 4 to the os 5.1.1 but lost all of my contacts. I believe it should still be stored in my laptop Apple file but don't know how to restore. I only see the restore option to the factory settings.

I updated my I Phone 4 to the os 5.1.1 but lost all of my contacts. I believe it should still be stored in my laptop Apple file but don't know how to restore. I only see the restore option to the factory settings. I have never used the I Cloud.

If you did not sync afterwards, follow this article to restore from your latest backup:
iTunes: Backing up, updating, and restoring iOS software

How do I highlight selected text in the Pages, Keynotes?

How do I highlight selected text in the Pages, Keynotes?

To answer your question foor your iOS Device using Pages or Keynote for iOS: You can't highlight as you might in many note taking apps for iPad, etc.
The best you can do at this point is to change the selected text's color by selecting the text > Style Menu (wrench) > Tap on the Font > Tap on the Color Box to reveal choices.
If you would like to join the chorus of folks wishing such a feature were in Pages and Keynote, you can leave feedback for the people at Apple:
http://www.apple.com/feedback/

How do I remove selected photos in the Photo Stream library.

How do I remove selected photos in the Photo Stream library in Aperture 3?

Just found this post in the iCloud Forum:
Re: Delete single photos in photostream
Apple is adding the ability to delete individual photos from the photostream in iOS 5.1 beta 2
http://www.appleinsider.com/articles/11/12/12/apple_adds_ability_to_delete_indiv idual_photo_stream_pics_in_ios_5_1_beta_2.html
Hope it's true ...

How to display lead selection ONLY in the ALV

Similar Messages

Maybe you are looking for