How to display menus on 40" TV

I just started connecting my MB to a 40" Samsung LCD TV via a mini display port to HDMI cable. The picture is fine except the menu dos not show on the TV. I have tried the different display resolution preferences and that doesn't work. Should I be able to display the menu and if so, how?
Thanks.

The "Overscan" option in Mac OS X's Displays panel only applies to analog TVs (in fact it isn't even available unless you are using one of Apple's video converter that's outputting NTSC or PAL signals). Or, at least that's been my experience with my MacBook when connected to my high-definition digital TV.
When you connect to a high-definition TV using HDMI or DVI for all intents and purposes you are connecting to a computer monitor and thus your TV must have a setting that allows it to behave as such. On my Toshiba Regza high-definition LCD TV this is called its "Native" picture size mode (as opposed to other settings like "Natural," "4:3 HD," "TheaterWide1," and others). On my Toshiba the "Native" mode is described as follows (in the user manual):
Native mode scales the video to display the entire picture within the borders of the screen (i.e.
no overscanning).
However, I think support for such scaling and picture handling is dependent on the manufacturer and thus it's possible that not every HD TV will offer these options.

Similar Messages

Itunes just started displaying menus in asian characters. How can I get back to english?

Itunes just started displaying menus in asian characters. How do I get them back to english?

iTunes: Changing the display language - http://support.apple.com/kb/HT2242 - "Follow the steps below to change the language displayed in iTunes and also the language displayed in the iTunes store."
Above method did not work but reinstalling iTunes did - https://discussions.apple.com/thread/6798898

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display a page at 100% size?

When I put the zoom at 100%, the page appears much smaller than real. My monitor is a 24" 1920x1200 pixels with 0.27 mm pixel size (that is 94 dpi)
I suppose there has to be some way to tell illustrator my screen has 94 dpi for it to display pages at the correct size, but I can't locate it.
In Adobe Photoshop this option is at Preferences/Units and Rulers but where is in Illustrator?

When you set in Photoshop "preferences/Units and rulers/Screen resolution" (I'm translating from my spanish menus, so it can be slightly different in english), you are telling the program what is the size of the pixels in your screen. This is enough for the computer to know how to display an image at the real size. If you make a DIN A4 document at 300 dpi in Photoshop, and you have set the mentioned parameter correctly, when you choose "View/Print size", you obtain in your screen a view of the document at the size it is supposed to be printed (so the document will occupy in the screen exactly 29,7 x 21 cm). Note this is different from 100% view (or "Real Pixels"). The fact this parameter is under "Preset resolutions for new documents" is a bit confusing, but it affects how you see any document at Print size, not only the new documents and is totally different from "Print resolution" (but depends on it). You can change the print resolution of any old document at "Image/Image Size..." but you can't change "its" screen resolution because this is a parameter of your computer screen, not of your document.
If you want to obtain the same effect in Microsoft Word, you have to go to "Control Panel/Screen/Configuration/Advanced Options/General/Dots per Inch Configuration" and this parameter will affect Microsoft Word. When you set the zoom lever at 100% in Word, again you will obtain in your screen a view of the document at the size it is supposed to be printed.
In Corel Draw, the corresponding parameter is at "Tools/Options/tool Box/Zoom Tool/Calibrate rulers...". There you can set the parameter numerically or you can use a set of on screen rulers to calibrate it. So when you set the zoom lever at 100%, again you will obtain in your screen a view of the document at the size it is supposed to be printed.
Notice you're working with vectors in Corel DRaw and Word (well, vector pictograms of letters or as we all know them: fonts) but you are working with bitmaps in Photoshop. That's why the 100% zoom is different in Photoshop than in the other programs (including Illustrator). and that's also why Photoshop has the Print size option. In the other programs, Print size and 100% would be the same but not in a bitmap program.
If you take a look in your monitor user manual you most likely will find a page of specifications where it tells you the dot size. This parameter can vary in CRT monitors that raster the image on a phosphor screen but is fixed in LCD monitors that have a fixed led matrix. If you don't have the manual or have a CRT monitor you can calculate the parameter by measuring the display size horizontally (from leftmost to rightmost displayed pixel) and dividing it by your screen resolution (the number of horizontal pixels).
In my User manual it says the dot size is 0.27 mm, that means 94 dpi (25.4 mm in an inch divided by 0.27). Or, in case I would have lost the manual, I would just measured the scren width and obtained 518.5 mm that divided by 1920 pixels horizontal resolution gives a result of 0.27 mm per pixel.
So, my question is ¿Is there some way of setting this parameter in Illustrator?

How to display each anchor point number or label?

Hello AI Community,..
in an earlier Illustrator CS version, i was able to display any Paths' anchor point Numbers or label. But in CS6 with both "Anchor/Path Labels" enabled in Prefs. > Smart Guide section and in View > Smart Guides, no Point Numbers are displayed.
Please let me know,..
1) ..how to display each paths anchor point numbers or label?
Thanks again for any help or suggestions,
Jeff

Thanks Kurt,..
just got in, checked and saw Measurment Labels, Anchor/Path Labels, Alignment Guides and Obj,Highlighting are all on. I also realized their working properly as "Anchor" and "Path" text labels display whenever moused over.
But i can't remember how i enabled anchor point numeric display?
Checked all menus i could find without luck.
Any and all suggestions appreciated,
Jeff

Idoc-xi-file scenario. how to display file in html format

I am not sure whether this is a valid question.........but want to confirm as it was asked by somebody
In idoc-xi-file scenario....... how to display file in html format ??
Thanks in advance
Kumar

Hi Vijayakumar,
Thanks for your reply !! You mean to say I got to use XSLT mapping and also .htm and .html extension together to produce the html file ?? or it is sufficient to use any one of them to produce the html file ??
Regards
Kumar

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to display and edit the clob datatype column from Data base

Hi ,
I have a requiremsnt as below
1) One Table having some columns with CLOB data type along with varchar columns
2) need to display the data from DB in search screen and need to be edited clob column in edit screen
I created EO and VO with that Table and how to display the clob value into the input box for editing.
using Jdev 11.1.1.5.0 version.
Can you please help on this.
THanks & REgards,
Madhu

Hi,
If you are using an inputText component to display a Character Large Object (CLOB), then you will need to create a custom converter that converts the CLOB to a String.
For custom convertor refer below link,
http://docs.oracle.com/cd/E2438201/web.1112/e16181/af_validate.htm#BABGIEDH
(section7.4 Creating Custom JSF Converters)
Thanks,
Santosh M E

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to Display Excel Report in Client machine in Forms11g

Hi All,
we are running database in Linux server and separate Linux Application Server , But my question is how to display the data to Excel Report in the Client machine
in Forms11g applications.
Plesase suggest any method.
Regards
Venkatesulu Gunisetty

You should use webutils.
For proper answer, place ur request here in oracle Forms Thread,
Forms

Please Help::How to display a Map with LIsts as Keys and Values using JSTL

Hi,
I need some assistance on how to display a Map in JSP using struts or core JSTL. I have a HashMap which has a List of keys and each key maps to a value of an ArrayList.i.e I have an ArrayList of taxCodes and each taxCode maps to a value of taxDetails which is an ArrayList of details for for that particular taxCode. I have some trouble to display each taxCode then display taxDetails for each taxCode. Here is my code below:
OrderDetails.java
package orderitems;
import java.sql.*;
import java.util.*;
public class OrderDetails {
    private LineOder lineOrder;
    private Map lineItems;
    //returns an item number, key_item, from its unique keys
    public int getItemNumber(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        int itmNum = 0;
         * key_item a unique number for an item.
         * key_year,key_office,key_client,key_company unique keys
         * for each order where this key_item is taken
         * from.
        String select = "SELECT key_item FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + key_item +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            if(rst.next()){
                itmNum = Integer.parseInt(rst.getString("key_item"));
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itmNum;
    //get a list of item number(item codes)
    public List getAllItemNumbers(String key_year,
            String key_office,String key_client,String key_company){
        List itemNumbers = new ArrayList();
        LineItem itemNumber = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        String select = "SELECT key_item FROM "+ Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                itemNumber = new LineItem();
                itemNumber.setKey_item(Integer.parseInt(rst.getString("key_item")));
                itemNumbers.add(itemNumber);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemNumbers;
    //get a list of tax codes
    public List getAllTaxCodes(int key_item, String key_year,
            String key_office,String key_client,String key_company){
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        ItemTax taxCode;
        List taxCodes = new ArrayList();
        int itemNum = getItemNumber(key_item, key_year,
                key_office,key_client,key_company);
        String select = "SELECT key_tax_code FROM "+
                Constants.WEB_TABLE +" WHERE key_item = " + itemNum +
                " AND key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company +"'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                taxCode = new ItemTax();
                taxCode.setKey_tax_code(rst.getString("key_tax_code"));
                taxCodes.add(taxCode);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return taxCodes;
    /////This methode returns a Map which am trying to display in JSP
    //use tax code to get tax details
    public Map getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
            System.out.println();
            System.out.println("*********CONSOLE OUTPUT*************");//display on console
            Set set = itemTaxDetails.keySet();
            Iterator iter = set.iterator();
            System.out.println("Key\t\tValue\r\n");
            while (iter.hasNext()) {
                Object taxCode=iter.next();
                Object details=itemTaxDetails.get(taxCode);
                System.out.println(taxCode +"\t" + details);
            System.out.println("************************************");
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return itemTaxDetails;
    //details of an item with all its taxes
    public List getAllItemDetails(String key_year,
            String key_office,String key_client,String key_company){
        List lineItems = new ArrayList();
        List itemNumbers = new ArrayList();
        Map taxDetails = new HashMap();
        LineItem item = null;
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //A list of all item numbers in the declaration
        itemNumbers = getAllItemNumbers(key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator itemIter= itemNumbers.iterator(); itemIter.hasNext();){
                LineItem itemNum = (LineItem)itemIter.next();
                int itemNumber = itemNum.getKey_item();
                String select = "SELECT item_description,item_mass," +
                        "item_cost" +
                        " FROM " + Constants.WEB_TABLE +
                        " WHERE key_year = '"+key_year+"'" +
                        " AND key_office = '"+key_office+ "'"+
                        " AND key_client = '"+key_client+ "'"+
                        " AND key_company = '"+key_company+ "'"+
                        " AND key_item = " + itemNumber;
                rst = stat.executeQuery(select);
                while(rst.next()){
                    item = new LineItem();
                    item.setItem_description(rst.getString("item_description"));
                    item.setItem_mass(Float.parseFloat(rst.getString("item_mass")));
                    item.setKey_item(Integer.parseInt(rst.getString("item_cost")));
                    //////other details records ommited//////////////////////////
                    /* A HashMap of all itemTaxeCodes as its keys and an
                     * ArrayList of itemTaxedetails as its values
                    taxDetails = getItemTaxDetails(item.getKey_year(),item.getKey_office(),
                            item.getKey_client(),item.getKey_company(),item.getKey_item());
                    //item tax details
                    item.setItmTaxes(taxDetails);
                    //list of items with tax details
                    lineItems.add(item);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineItems;
    public Set getOrders(String key_year,String key_office,
            String key_client,String key_company){
        List lineItems = new ArrayList();
        Set lineOrders = new HashSet();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        LineOder lineOrder = null;
        String select = "SELECT * FROM " + Constants.WEB_TABLE +
                " WHERE key_year = '" + key_year + "'" +
                " AND key_office = '" + key_office + "'" +
                " AND key_client = '" + key_client + "'" +
                " AND key_company = '" + key_company + "'";
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            rst = stat.executeQuery(select);
            while(rst.next()){
                lineOrder = new LineOder();
                lineOrder.setKey_year(rst.getString("key_year"));
                lineOrder.setKey_office(rst.getString("key_office"));
                lineOrder.setKey_client(rst.getString("key_client"));
                lineOrder.setKey_company(rst.getString("key_company"));
                ////list of items with all their details
                lineItems = getAllItemDetails(lineOrder.getKey_year(),lineOrder.getKey_office(),
                        lineOrder.getKey_client(),lineOrder.getKey_company());
                //setting item details
                lineOrder.setItems(lineItems);
                //a list of order with all details
                lineOrders.add(lineOrder);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        return lineOrders;
Controller.java
package orderitems;
import java.io.*;
import java.util.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Controller extends HttpServlet {
    private Map taxDetails = new HashMap();
    private OrderDetails orderDetails = null;
    protected void processRequest(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        response.setContentType("text/html;charset=UTF-8");
        String key_year = "2007";
        String key_office = "VZX00";
        String key_company = "DG20";
        String key_client = "ZI001";
        int key_item = 1;
        String nextView = "/taxdetails_list.jsp";
        orderDetails = new OrderDetails();
        taxDetails = orderDetails.getItemTaxDetails(key_year,key_office,
                key_company,key_client,key_item);
        //Store the collection objects into HTTP Request
        request.setAttribute("taxDetails", taxDetails);
        RequestDispatcher reqstDisp =
                getServletContext().getRequestDispatcher(nextView);
        reqstDisp.forward(request,response);
    protected void doGet(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
    protected void doPost(HttpServletRequest request,
            HttpServletResponse response)throws
            ServletException, IOException {
        processRequest(request, response);
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <title>Simple Tax Detail Diaplay ::</title>
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <jsp:useBean id="taxDetails" class="java.util.HashMap" scope="request"/>
        <table>
            <c:forEach items="${taxDetails}" var="hMap">
                <tr>
                    <td><c:out value="${hMap.key}" /></td>
                    
                </tr>
            </c:forEach>
        </table>
    </body>
</html>am displaying taxCodes(in this case i have VAT and ICD) fine but cant figure out how to display a list of value for each taxCode.Here is the output am getting
both in my JSP and on the console:
*******************************CONSOLE OUTPUT****************************
Key          Value
ICD     [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
VAT [orderItems.ItemTax@13e6226, orderItems.ItemTax@9dca26]
Edited by: aiEx on Oct 8, 2007 6:54 AM

hi evnafets,
yes i need a nested for loop.I have tried your advice but my bean properties are not found.Am getting this error:
javax.servlet.ServletException: Unable to find a value for "key_item" in object of class "java.lang.String" using operator "."
I have tried this as stated earlier in the post:I have tried to make the method getItemTaxDetails return a List and get the returned list value as taxDetails. I then tested to display this list on JSP and its displaying fine.
public List getItemTaxDetails(String key_year,String key_office,
            String key_client,String key_company,int key_item){
        ItemTax taxDetail = null;
        List taxDetails = new ArrayList();
        List itemTaxCodes = new ArrayList();
        Map itemTaxDetails = new HashMap();
        Connection conn = null;
        Statement stat = null;
        ResultSet rst = null;
        //get a list of all tax codes of an item with a
        //given item number
        itemTaxCodes = getAllTaxCodes(key_item,key_year,
                key_office,key_client,key_company);
        DbConnection dbConn = new DbConnection();
        try {
            conn = dbConn.getDbConnection(Constants.WEB_JNDI);
            stat = conn.createStatement();
            for(Iterator taxCodeIter= itemTaxCodes.iterator(); taxCodeIter.hasNext();){
                ItemTax itemTaxCode = (ItemTax)taxCodeIter.next();
                String taxCode = itemTaxCode.getKey_tax_code();
                String select = "SELECT tax_type,tax_value," +
                        "tax_limit_val FROM "+ Constants.WEB_TABLE +
                        " WHERE key_item = "+ key_item +
                        " AND key_year = '" + key_year + "'" +
                        " AND key_office = '" + key_office + "'" +
                        " AND key_client = '" + key_client + "'" +
                        " AND key_company = '" + key_company +"'" +
                        " AND key_tax_code = '" + taxCode + "'";
                rst = stat.executeQuery(select);
                while(rst.next()){
                    taxDetail = new ItemTax();
                    //records to be displayed only
                    taxDetail.setKey_item(Integer.parseInt(rst.getString("key_item")));
                    taxDetail.setTax_value(rst.getString("tax_value"));
                    taxDetail.setTax_limit_val(Float.parseFloat(rst.getString("tax_limit_val")));
                    //////other details records ommited//////////////////////////
                    taxDetails.add(taxDetail);////An ArrayList of taxDetails for each taxCode
                 * A HashMap which has all taxCodes of an item as its keys
                 * and an ArrayList of taxdetails as its values.
                 * I return this for display in a JSP.
                itemTaxDetails.put(taxCode,taxDetails);
        } catch (SQLException ex) {
            ex.printStackTrace();
        } finally{
            SQLHelper.cleanUp(rst, stat, conn);
        //return itemTaxDetails;
        return taxDetails;
    }And my JSP
taxdetails_list.jsp
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <link rel="stylesheet" type="text/css" href="imgs/orders.css"/>
    </head>
    <body>
        <table>
            <c:forEach var="curRecord" items="${taxDetails}" varStatus="rowCounter">
                    <c:choose>
                        <c:when test="${rowCounter.count % 2 == 0}">
                            <c:set var="rowStyle" scope="page" value="odd" />
                        </c:when>
                        <c:otherwise>
                            <c:set var="rowStyle" scope="page" value="even" />
                        </c:otherwise>
                    </c:choose>
                    <tr class="${rowStyle}">
                        <td>${curRecord.key_item}</td>
                        <td>${curRecord.tax_value}</td>
                        <td>${curRecord.tax_limit_val}</td>
                    </tr>
                </c:forEach>
        </table>
    </body>
</html>I can't see where am going wrong even with your advice.Please help.
Thnx.

How to display total in ALV Header

How to display total in ALV Header?

Hi Venkey,
As far as your issue is concerned I would like to quote my perception.
Create a header internal table with title and number of records.
At the later part of your program you should have found the total number of records ,now assign it to the header internal table and print it.
For further clarification you can go check this link:
http://wiki.sdn.sap.com/wiki/display/ABAP/AddHeadertoALVreport
Thanks
P.Srikanth

How to display database items

can anyone tell me how to display the selected contents of
the database by using a variable from my form field(like text box
)

Hello Guys!
Sorry forever to get back. Going to throw this up here quick
so I dont time out, but if you need further help post back and I
will help with specific questions.
Using the City, State example. This operation is two fold.
(a) the search page, and (b) the results page.
(a) On your search page you would have two fields. City and
State. Make sure your table that holds these fields are containted
within a form tag. (Insert > Form > Form). Also make sure
your textfields have names. You can click on the textfield to
highlight in design view and change the name from 'textfield' and
'textfield1' to 'city' and 'state'..
Highlight the form tag and in the properties panel where it
says "action" insert the URL/file of your results page. This is the
page that is actually going to display the information, then save
your work.
(b) Open up your results page, and in the bindings panel
click the "+" then select query. In the 'simple' window name your
recordset (example: rsStores) select your connection, then select
the table you desire to display results from. From this window you
can also choose a field to use as an order by. Do not use the
filter!
With this done and 'without' saving yet, click on the
"advanced" tab. You should now see and a simple statement in the
window that looks something like:
SELECT *
FROM Stores (The name 'Stores' will actually be replaced with
your table name)
Below the statement you will see 'parameters' with a + and -.
Hit the plus to add a parameter. For name use varState, for Type
use text, for Value use Request("State") and for default value use
zero. Replicate the process for varCity using Request("City") for
the value. (The requests are the same names as the names you used
to name your fields in the search form). Now go up to the original
statement and edit it to look like this:
SELECT *
FROM Stores WHERE yourfieldname = varState AND WHERE
yourfieldname = varCity
Replace 'yourfieldname' with the actual field name holding
the values. Keep EVERYTHING case sensitive. Testing in design view
will not work because there are no values yet passed. So click ok,
save the page and upload them to server. Test by going to the
search page and submitting the search form.
Hope that helps..!!

How to display Opening Balance/Closing Balance in Genral Ledger PLD

Hi all,
How to display Opening Balance
in General Ledger
PLD
(OB is already displayed in
header of print report)
on first page only?
How to display Closing Balance
in General Ledger
PLD
(CB is already displayed in
footer of print report)
on Last page only?
Thanks,
With regards,
Jeyakanthan.

Hi,
If you open General Ledger Report and after selecting customer code you will see the Print Preview. On that time, one window opens and asks you to select any one from two options.
Option 1 : Book of Accounts
Option 2 : Subsidiary Account
In both the Options, PLD has Opening Balance in Repetitive Area Header and Closing Balance in Repetitive Area Footer. So, it will when Report grows more than one page and if you want to see both the Opening Balance and Closing Balance in all the pages then you should Tick the Check Box "Display Repetitive Area Footer on all Pages" . So that you can view OB and CB in all the pages.
Raja.S

How to display menus on 40" TV

Similar Messages

Maybe you are looking for