How To Display Minus value in SAP SCript
Hello Guys.
I am working on a Script. My Problem is that For a fields BSAD-DMBTR.
I have to show this fields value as minus or plus as per condition with fields
<b>bsad-shkzg</b>. In my Internal table it's update as minus but when I am calling Write form with loop. the value is not display with minus sign.
How can I display value with minus sign in SAP script.
Regards
Swati,,
Hello Guys..
Thanks for Reply. But I am doing that thing already. My Internal table is updated with minus value. My Problem is not That.
let's suppose.
itab-name = 'xyz'.
itab-value = 100.
append itab.
itab-name = 'xyz1'.
itab-value = -1 * 100.
append itab.
loop at itab.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LINE'
function = 'SET'
type = 'BODY'
window = 'MAIN'
EXCEPTIONS
element = 1
function = 2
type = 3
unopened = 4
unstarted = 5
window = 6
bad_pageformat_for_print = 7
spool_error = 8
codepage = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endloop.
Now when value is printed in SAP Script both value is display as plus .I want to display secound value as minus.
Please reply it's urgent.
Thanks
Swati....
Similar Messages
-
How to calculate a value in sap script?
Hi friends i have to do addition and then display the added value in grandtotal like
total amount + late fee = grand total
i have to do this in sap script can anyone tell me the procedure where to declare wheather in abap aditor if yes how?Hi ...
Its easy to add up two values...
u can do it in a subpool program...
Refer the following code:
Code the following in the Script...
/: PERFORM TOTAL_SUM IN PROGRAM 'ZTEST_ADDITION'
/: USING &VAL1&
/: USING &VAL2&
/: CHANGING &TOTAL&
In the EDitor..create a program ' ZTEST_ADDITION'..
FORM TOTAL_SUM TABLES in_tab STRUCTURE itcsy
out_tab STRUCTURE itcsy.
Read in_tab index 1.
Here u will get the val1...
Read in_tab index 2.
here u will get val2.
l_v_total = val1 + val2.
read out_tab index 1.
out_tab-value = l_v_total.
modify out_tab index 1.
Write the changing paramets in the form
to Output the values...
Thanx,
navin..! -
How can u pass value in SAP Script?& where?
Hi,
PASSING TABLE VALUES AS AN ARGUMENT TO SAPSCRIPT:
In the line editor, specify the table field arguments enclosed by '&' symbol as follows:
/E ELEMENT
&KNA1-KUNNR& ,, &KNA1-NAME1& ,, &KNA1-LAND1&
Save -> Activate.
In the Print Program, specify following code:
TABLES KNA1.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'ZSHABFORM1'
LANGUAGE = SY-LANGU.
SELECT * FROM KNA1.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ELEMENT'
WINDOW = 'MAIN'.
ENDSELECT.
CALL FUNCTION 'CLOSE_FORM'.
Save -> Activate -> Execute.
Regards,
Priya. -
How to call a subroutine from sap script
hi friends,
Can anybody tell me How to call a subroutine from sap script .
thanks n regards .
Maheshhi..
Calling ABAP Subroutines: PERFORM
You can use the PERFORM command to call an ABAP subroutine (form) from any program, subject to the normal ABAP runtime authorization checking. You can use such calls to subroutines for carrying out calculations, for obtaining data from the database that is needed at display or print time, for formatting data, and so on.
PERFORM commands, like all control commands, are executed when a document is formatted for display or printing. Communication between a subroutine that you call and the document is by way of symbols whose values are set in the subroutine.
The system does not execute the PERFORM command within SAPscript replace modules, such as TEXT_SYMBOL_REPLACE or TEXT_INCLUDE_REPLACE. The replace modules can only replace symbol values or resolve include texts, but not interpret SAPscript control commands.
Syntax in a form window:
/: PERFORM <form> IN PROGRAM <prog>
/: USING &INVAR1&
/: USING &INVAR2&
/: CHANGING &OUTVAR1&
/: CHANGING &OUTVAR2&
/: ENDPERFORM
INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
The ABAP subroutine called via the command line stated above must be defined in the ABAP report prog as follows:
FORM <form> TABLES IN_TAB STRUCTURE ITCSY
OUT_TAB STRUCTURE ITCSY.
ENDFORM.
The values of the SAPscript symbols passed with /: USING... are now stored in the internal table IN_TAB . Note that the system passes the values as character string to the subroutine, since the field Feld VALUE in structure ITCSY has the domain TDSYMVALUE (CHAR 80). See the example below on how to access the variables.
The internal table OUT_TAB contains names and values of the CHANGING parameters in the PERFORM statement. These parameters are local text symbols, that is, character fields. See the example below on how to return the variables within the subroutine.
From within a SAPscript form, a subroutine GET_BARCODE in the ABAP program QCJPERFO is called. Then the simple barcode contained there (First page, Next page, Last page) is printed as local variable symbol.
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
regards,
veeresh -
How to get the last page SAP Script form
How to get the last page SAP Script form.
I want to print a specific information in the last page of SAP form (Script). Please tell me how to get the last page number.
RegardsHi
You have to check the system variable &NEXTPAGE&, if it's 0 it means you're in the last page.
From SAP Help:
This symbol is used to print the number of the following page. The output format is the same as with &PAGE& .
Note that on the last page of the output, in each window that is not of type MAIN, &NEXTPAGE& has the value 0.
/: IF &NEXTPAGE& = '0'
Last page
/: ENDIF
Max -
How to use perform statements in sap scripts
how to use perform statements in sap scripts . and pls send me one progam for this
thnaks
rajaHi Raja,
<b>PERFORM</b> key work is used to include subroutine in sapscript form...
But the processing is lttle bit different form the one we use in ABAP.
Here the paramters passed to form is stored in internal table of name-value table. there are two table one for inbound parameter and other for outbound parameters.
Check out the example below to see how this is used..
<b>Definition in the SAPscript form:</b>
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
<b>Coding of the calling ABAP program:</b>
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY PAGE.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY NEXTPAGE.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE OUT_PAR WITH KEY BARCODE.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = |. "First page
ELSE.
OUT_PAR-VALUE = ||. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = L. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.
Hope this is clear to understand...
Enjoy SAP.
Pankaj Singh. -
How to Avoid blank page in SAP Script
I am working on a Script. My Script prints a check.
This script is a copy of a std script.
It has 3 pages - First Next Last
My First page has all the required data.
My second page is empty with out any values.
I am getting the blank page as Page 2 when executing. How can we avoid it ?
SenthilHi Senthil,
Please see the below points:
1. Please check what have you defined as the NEXT PAGE for your first page. If so change it and make the first page itself as the next page.
2. Check your main Window, may be there is blank line at the last of the main window, so check that abd remove that,so you won't get the blank page
Please see the link which is similar to your problem:
Re: How to remove blank page in sap script
May it helps you.
Regards.
Deepak Sharma. -
How to put Page break in SAP Script
Hi Experts,
Please tell me how to put page break in SAP Script. or give some sample code
looking forward for your reply..
Regards,
Kali PramodHi,
NEW-PAGE is used to insert a page break ,
it can be conditional if used between IF..ENDIF
e.g. /:IF &KNA1-NAME1& = 'XYZname'
/:NEW-PAGE
/:ENDIF
If u want to Page break after displaying certain records or after some condition you use NEW-PAGE
reward if useful. -
Sap script '' how to create table frame in sap script"""
i have some problem in sap script'' how to create table frame in sap script"""
Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar. -
HOw can we Call Subroutine in Sap Script?
HOw can we Call Subroutine in Sap Script?
Hi
*You have to call sub routine from script like this.
/: PERFORM DATE_FORMAT IN PROGRAM &SY-REPID&
/: USING &RM06P-LFDAT&
/: USING &PEKKO-LFDAT&
/: CHANGING &VALUE_OLD&
/: CHANGING &VALUE_NEW&
/: ENDPERFORM
*In print program write code.
FORM date_format TABLES in_tab STRUCTURE itcsy
out_tab STRUCTURE itcsy.
DATA : date TYPE char10.
DATA : date2 TYPE char10.
DATA : l_dmbtr TYPE char10.
READ TABLE in_tab WITH KEY 'RM06P-LFDAT'.
IF sy-subrc = 0.
"Your code goes here
CLEAR l_dmbtr.
ENDIF.
READ TABLE in_tab WITH KEY 'PEKKO-LFDAT'.
IF sy-subrc = 0.
l_dmbtr = in_tab-value.
"Your code goes here
CLEAR l_dmbtr.
ENDIF.
READ TABLE out_tab WITH KEY 'VALUE_NEW'.
IF sy-subrc EQ 0.
out_tab-value = date2.
MODIFY out_tab INDEX sy-tabix.
ENDIF.
READ TABLE out_tab WITH KEY 'VALUE_OLD'.
IF sy-subrc = 0.
out_tab-value = l_dmbtr.
MODIFY out_tab INDEX sy-tabix.
ENDIF.
ENDFORM. "DATE_FORMAT -
How to know print program for SAP Script
Hi friends,
how to know print program for SAP Script form name ?Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
where id = in_tab-value.
if sy-subrc = 0.
read table out_tab index 1.
move scustom-name to out_tab-value.
modify out_tab index sy-tabix.
else.
read table out_tab index 1.
move 'No name' to out_tab-value.
modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
READ TABLE out_par WITH KEY 'NAME1'.
out_par-value = l_name1.
MODIFY out_par INDEX sy-tabix.
endform. -
How to print last page in sap script in ladscape format?
Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
PravinHi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam -
How to print Special Characters in Sap-Scripts
How to print Special Characters in Sap-Scripts
Thanks,
RaviHi
if u want print special characters we can use hot codes i.e ' ' (single inverted commas). in between these hot codes insert u r special characters.
write ' !@#$%^&*( ) '.
for the above write statement output is
output is !@#$%^&*( ) -
How to use IF Conditon in SAP Scripts?
Hi Guys,
I am having adoubt how to use IF conditon with multiple variables in SAp Scripts
for ex If a>b and a>c and a>d
Elseif b>a and b>c and b> d.
Elseif .....
endif.
How to use above example in SAP Scripts.
thanks,
Gopi.hi Gopi,
it is almost the same as normal ABAP, you only have to use & before and after the variable and the variable has to be in capitals and you have to make the line as command ( /: before the line )
IF &A& > &B& AND ...
text to print
ELSEIF ...
text to print
ENDIF.
hope this helps
ec -
How to print Vertical barcode in SAP script
I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay.
Maybe you are looking for
-
Error while trying to retrieve the task: EventId(complete) does not belong
Hi Experts, I have created a process composer DC in which i have created a process with two human tasks. Each tasks is binded with web dynpro Iviews (means followed all the steps neccesary). I deploed the DC successfully. now i started the process an
-
Problem installing 10g on unbreakable linux
hi, I have Oracle unbreakable linux oracle 10.2.0.1 I got this error while installing 10g on unbreakable linux Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-07-13_08-38-37AM. Please wait ...oracle@sphlpr-bldbs01 database$ Ex
-
[GRC] IS-Risks in Complex Value Networks
Hi everybody, I would like to discuss my current research project with you: Especially in complex value networks, it is important to have mutual risk understanding and mechanisms to control risks among all value adding partners. How can global sourci
-
Install adobe flash player for my samsung galaxy 3 phone
Please i need to install adobe flash player for this phone samsung galaxy 3
-
Inserting new Account Contacts puzzling error
For some reason, inserting a contact with a random ContactLastName returns an error. See example below: SOAP Request: <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="urn:crmondemand/ws/ecbs/account/10/2004" xml