How to display multiple account addresses in a report ?

Hello,
Seems to be easy to do but I didn't succeed.
Some of our accounts can have several addresses (5 or 6 store locations) and I didn't succeed to display them in my report.
I was just able to get the shipping and billng.
Could you help please ?
David

What subject area are you using? You should be able to get all the addresses from the Account Addresses subject area.

Similar Messages

How do display multiple accounts under one CalDav account?

Hello - I have a google mail account, for which I use google calendar to organize both my and my wifes calendars. We share calendars, but she has a separate google account and calendar. Using iCal, both these calendars are subscribed using separate CalDav accounts. Using the calendar function on the iphone, I subscribe to both calendars separately as well, but the interface is different.
Here's my question: I created a new calendar under my account, which I would like to share with certain people (call it 'Group cycling sessions.'). On iCal, under > Properties > 'delegation,' I can access the calendar, and by the way, access my wifes as well. However, I cannot figure out how to subscribe to this calendar on the iphone (short of using mobile me, which I am loathe to do).
Any ideas?

Google calendar colours are taken from the Google settings.
If you have another account such as the calendar on your iPhone or the Birthday Calendar, each time they are removed and re-activated, the colour will cycle to the next one Apple has chosen

How to Display multiple records in Table in VC without using BAPI.

Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
Sheetal

Hi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel

How to display multiple attachments in UWL item in portal?

HI,
How to display multiple attachments in UWL item in portal?
I want to display more than one attachment in UWL body,present its dispalying one attachment.
Pls help on this
Thanks,
Bheem
Edited by: v bheem on Aug 4, 2009 3:10 PM

Hi,
Are you able to manage this! Pls do let us know if you have done any configuration changes!

How to display multiple thumbnail images in jframe

hi
please help me about how to display multiple thumbnail images in jframe

Multi post:
http://forum.java.sun.com/thread.jspa?threadID=627253&messageID=3588990

How to Validate Multiple email address in spry?

How to validate multiple email address in spry framework?
Spry validate text field can validate one email address only,
if I the text field is for multiple emails, how can I validate
it?

Hello Jackson,
The Spry Textfield was designed to work with the normal work
flows that people currently use in most of the forms on the web. We
tried to prevent any email injection method in the forms therefore
the validation was designed to stop any multiple email insertion.
In case you want to insert multiple emails you'll have to
disable the default email validation and create your own validation
function, more flexible. You can see a
sample
we did for the custom validation trying to validate a password
strength and confirm the password.
Cristian

How to display multiple tables from database using netbeans swing gui

plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to run multiple sqls in one jasper report

Hello!
Is there any one that can help me in integrating/ viewing my xml file to the web. I have my GUI in jsp format, the jsp makes a call to the bean class and then finally bean class hit my reports java class.The report java class generates the report and shows it in the new window.
The problem is with writing mutiple sql queries and showing the result from multiple sql queires in one report.
I do not know how to write multiple queries for just 1 report. I can give a simple example of my problem also.
My report is as follows:
First Name Middle Name Last name
Sandeep Pathak
Now First and Middle Name come from 1st sql query and Last Name comes from 2nd sql query.
I want to join the result obtained from both the sql queries in one Jasper Report (not as 2 separate sections but as one section).
My problem is how to view my report in the web. furthermore, how to make complex query in jasperassistant, like multiple table in one query, because i�m integrating multiple query in one form or sheets of paper.
Please help me in this.
Thanks
Sandeep
Calance
India

Hi Sheldon,
we never have issues when we combine standard objects, like a cliear with a load inforprovider, or the master data integration you mentioned in your document. However, from the moment we combine a script logic with a standard package (like a move) it does not work .The data package contains the task needed for the script and for the move. the process chain is called up but always comes in error in the first step (BPC modify dynamically ) ... there is also no log when checking the view status ...
I can sent you some screenshots if you like ...
D

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
                        MODE c_n
                        MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
    MOVE v_pernr TO i_bdcerror2-pernr.
    MOVE c_infotype TO i_bdcerror2-infty.
    MOVE 'Error' TO i_bdcerror2-msgtype.
<b>    SELECT SINGLE text
      INTO v_msgtxt
      FROM t100
      WHERE sprsl = i_error2-msgspra
      AND arbgb = i_error2-msgid
      AND msgnr = i_error2-msgnr.
    MOVE v_msgtxt TO i_bdcerror2-msgtxt.</b>
    APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
         'INFOTYPE',
         'MESSAGE TYPE',
         'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
    WRITE: / i_bdcerror-pernr,
           13 i_bdcerror-infty,
           22 i_bdcerror-msgtype,
           35 <b>i_bdcerror-msgtxt</b>.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, <b>MESSAGE_TEXT_BUILD</b> and pass the following values from <b>BDCMSGCOLL</b> or the internal table where you collect the messages.
   i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
   v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to set multiple operating units in before report trigger

hi all
can any one help me out in getting clear in how to set multiple operating units in before report trigger in oracle report.
as we set single operating unit (mo_global.set_policy.context('S',81); as 81 is my operating unit).then who to set for multiple operating unit at run time.

Sounds like eBusiness Suite, right? Better ask this in the appropriate forum.

How to configure multiple IP addresses on one NIC?

Hi,
I just installed a OVM Server in version 3.2.1 and the according VMManager. Now i wanted to try to configure the Server/Server Pool. Now i come across a problem, which was already a big problem in OVM 2 while configuring the Networks.
All our OVM Servers have three NICs in them. One is for VMs and Management, the others are for connection to our SAN (Dell PowerVault MD 3220i). My problem is, that due to the network setup, the two NICs for storage need two IP addresses in two different networks each. This shouldn't be a problem, because usually in linux all you have to do is configure something like eth1:1. I remember having huge trouble configuring it in our OVM 2 cluster up to the point where I had to write a shell script to configure the second IP.
Anyways, I have configured two of the storage networks on eth1 and eth2 of the VM Server. Now i cannot configure any more IP addresses, because eth1 and eth2 are not available anymore for configuration in a third network. I really hoped that it would be possible in OVM 3 to configure multiple IP addresses. And probably it is only my lack of knowledge of how to configure it.
So any advice is well appreciated.
Thanks!
Regards,
Marek Hubatka

You should be able to do this by using "VLAN Groups".
http://docs.oracle.com/cd/E35328_01/E35332/E35332.pdf
Check out the VLAN groups section. You must great the VLAN groups before you can assign them to interfaces.

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

How to display multiple categories of webapp items in list view? Changing listbox list to checkbox list to select category in submission process?

Hello!
1.
I am trying to get my page to list webapp items that are part of a few categories. I understand that if i want to view only one category, I just need to do the normal process of choosing that category and placing it out. So my question is: How do I display multiple categories of items in a webapp in a single page. I've tried this
{module_webapps,WEBAPP_ID,c,CATEGORY_ID1,,,,10,,1} {module_webapps,WEBAPP_ID,c,CATEGORY_ID2,,,,10,,1}
This only displays the everything from the first category, then everything from the next, which will not make it in order of date.
I've also tried this for fun:
{module_webapps,WEBAPP_ID,c,CATEGORY_ID1&CATEGORY_ID2,,,,10,,1}
How can I go about doing it?
2.
I am looking to allow users to input a webapp item and allow them to select a category to tie to that item.
<label for="CAT_Category">Category (You may select more than 1)<span class="req">*</span></label>
    <select name="CAT_Category" id="CAT_Category" class="cat_listbox" rows="4" multiple="multiple" style="height: 60px;">
    <option value="CATEGORY_ID1">--- Option 1</option>
    <option value="CATEGORY_ID2">--- Option 2</option>
    </select>
Is it possible for me to change the listbox style into a checkbox style such that the user doesn't have to control+click multiple options?

No answer to No.1 but I really want to find it out too.
No.2
If you already know list of the categories & ID you can manually create a list of checkboxes
<input type="checkbox" name="CAT_Category" value="89081" />
<input type="checkbox" name="CAT_Category" value="89082" />
<input type="checkbox" name="CAT_Category" value="89083" />
something like that should work

How to configure multiple email addresses for a Google Apps profile on iOS 8.1?

I've got a Google Apps account with 4 incoming email addresses. I'd like to use either Exchange or Google as the email type for this account. I understand how to setup the original account (done, works great). I understand how to change the one-and-only sending address to essentially any one of the 4 authorized send-from emails. However, I can't seem to figure out how to add all 4 addresses so that Mail.app on my phone automatically chooses the correct address for replies to incoming

I would like to know this too, although as far as I have read, it's not possible (anymore) with Mail. Previous you would have added your 4 email addresses separated by commas as your email address. I tried doing that recently but Mail did not understand it. You will need to resort to using the official Gmail app for your secondary incoming addresses.

How to display multiple account addresses in a report ?

Similar Messages

Maybe you are looking for