How to display multiple page images in forms ?

Hi,
What is the best method to display multiple pages image(100 pages) in forms 10g?
Thanks

Hello,
this is a link to a tutorial that contains several sample forms. One of them (ALBUM.FMB) demonstrates how to display hundred of images. The tutorial is in French, but you can simply download the samples on the introduction chapterFrancois

Similar Messages

How to display multiple pages in smart forms

Hi Experts,
I am facing one problem in Smartforms. here i am using one page & main window, Mainwindow consists one TABLE, it contains 100 records. While printing this smartform, i am getting only one page and mainwindow was filled with only 80 records...remaining 20 records has to display in 2nd page but it was not displaying 2nd page at all.
Can any one please help me.
Thanks,
sreelakshmi.

Hi,
Use the same page name in the general attributes-> next page of your created page.
Thanks
Arul.

How to display multiple thumbnail images in jframe

hi
please help me about how to display multiple thumbnail images in jframe

Multi post:
http://forum.java.sun.com/thread.jspa?threadID=627253&messageID=3588990

How to display multiple records in smart forms in new page for each record

Hi,
How to display the data from a internal table in a smart form.
I want each record to be displayed in seperate page.
please tell me with example.
thank u,
Sarath

Do this ,
in the main window - open a loop on your internal table ,
within the loop open the text and give the output fields,
after this text use the Command node and in this set the next page as page1,
so when the loop gets executed its first record will be on the first page and the second record will be on the next page and so on ..
Reward to usefull answers.

How to print multiple pages of same form with one print command

Hi,
I have created a cheque print form in smartform. There is provision to print multiple cheques. I give multiple cheque numbers from my selection screen and for each cheque the smart form is called in loop. Currently I get preview of 1st cheque then I print 1st cheque then click on back, cancel or exit button and then I get preview of second cheque ans so on...
Now I want to print all the cheques with one print command.
Please advice.
Regards,

Instead of looping at the smartform multiple times, pass an internal table with the data content to the smartform and use loop/ Table youroption in ur smartform in the main window.in this way u can achieve printing multiple cheques at once and avoid previewing the document several times.
Edited by: Mithun Shetty on Feb 25, 2011 8:56 PM

How to link Multiple pages in smart forms?

Hi experts,
am creating one smartform in that i have 4 pages each page is different from the other.
am linking the pages as
for page1 -
next page = page2
and create a command on main window in that go to next page(checked) page2.
similarly all the pages i have given
for page2 -
next page = page3
and create a command on main window in that go to next page(checked) page3.
but in output am getting only 2 pages only
will u help for this.
thanks and regards
taj

Hi max,
yes i created command in all pages main window
in page1
mainwindow1
command(in mainwindow1)
page2-mainwindow2-command
like this in all 4 pages i have given
but not getting the output of 4 pages
only getting the 2 pages
those are first page and the page that is connected to first page either it is 2nd or 3rd or 4th
how this am not getting the solution.
help me
thanks

How to Display multiple records in Table in VC without using BAPI.

Hi All,
I am working on Visual composer (NW2004s SP10). I am trying to display Poitems from BAPI_PO_GETDETAIL. I am creating my front end using VC. I have created one form and one Table where I want to display POItems. I am writing my logic of retrieving data from BAPI in CAF.I am connecting them in Guided procedures.When I run my process in Guided Procedures I am getting single row displayed in table. Can Anyone help me how to display multiple rows in table.
Regards,
Sheetal

Hi Sheetal,
if the BAPI returns a table, then you get multiple rows. From which system is the BAPI, so that I can check the BAPI to give you further information.
Best Regards,
marcel

How to scan multiple pages in one file

I would like to know how to scan multiple pages into one file. There is no add button that comes up. I have a HP Officejet 8600 and a macbook pro. Please help, this would really help me out.

Open Preview and use its "Import From Scanner" option in the File menu. This will launch the scanning interface, which has some standard and basic scanning controls. If you choose "PDF" as the file format to save as, then you will see an option to scan all images to one file. When you do this, you will scan and edit them individually, but Preview will save them to the same file when saved.

Lightroom 4.3 displays multiple indentical images.

Mar 16, 2013 1:44 PM in reply to Community Help
Report
I am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
I can't find the reason for this in any help. I would appreciate very much some one telling me why this is takes place. It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
My feeling is that this is a unreported bug. I do not see how this could be a misapplication - though I would accept that if that was the case so I COULD CORRECT MY PROBLEM.
Is there anybody out there that knows about this problem, or has experienced it. Please tell me.

Mar 16, 2013 1:44 PM in reply to Community Help
Report
I am in the process of organizing my Literoom images and filter displays MULTIPLE IDENTICAL IMAGES, under METADATA STATUS changed. .
Computer info - Literoom 4.3, windows 7, some 55,000 images on the hardrive, one catalog used.
When I go to folders, and click on J drive which holds these images, they all come up if filter is off of course. Now using metadata I search on a date, a camera, lense, etc. But I just want to find all of my images on a particular day. I can find those with no problem. My problem is that I may have 2 or more identical images display in grid and view as well as film strip. Looking up metadate status I find that these images are CHANGED. I understand that status, but there is no way that these multiple images would result from my work.
I searched for multiple files located in multiple folders - What is creating those multiple files, they are identical as to date, how they look, etc?
If I go to CATALOG, and work with the all the images there, found at the top of course, I get the same functionality, BUT THE MULTIPLE IMAGES ARE ABSENT.
I can't find the reason for this in any help. I would appreciate very much some one telling me why this is takes place. It makes it difficult to keyword on images on a certain date, because of the multiple files.
Filters are NOT a powerful tool for organizing collections and keywords when this problem exists. My problem is not using filters, but understanding why multiple images.
My feeling is that this is a unreported bug. I do not see how this could be a misapplication - though I would accept that if that was the case so I COULD CORRECT MY PROBLEM.
Is there anybody out there that knows about this problem, or has experienced it. Please tell me.

How to display multiple attachments in UWL item in portal?

HI,
How to display multiple attachments in UWL item in portal?
I want to display more than one attachment in UWL body,present its dispalying one attachment.
Pls help on this
Thanks,
Bheem
Edited by: v bheem on Aug 4, 2009 3:10 PM

Hi,
Are you able to manage this! Pls do let us know if you have done any configuration changes!

How to display the page no in script

HI,
Can any one tell how to display the page no's as follows in Scripts.
current page/total no.of pages(ex:1/10)

Hi,
For Smartforms:
Just insert fields: &SFSY-PAGE& and &SFSY-FORMPAGES&.
Page: &SFSY-PAGE& of &SFSY-FORMPAGES&
For Sapscript:
Just add: &PAGE& and &SAPSCRIPT-FORMPAGES&
Page: &PAGE& of &SAPSCRIPT-FORMPAGES&
Regards,
Edited by: Jatra Riwayanto on Jun 4, 2008 9:33 AM
Edited by: Jatra Riwayanto on Jun 4, 2008 9:34 AM

How to display multi-channel image in the 'proxy'?

There're many examples to show how to display composite channels in the 'proxy'. But I don't find any example to show how to display multi-channel image in the 'proxy'. I found that I can use PSPixelOverlay to display alpha channel data like this:
int nSpotChannel = gChannelCount - 4;
PSPixelOverlay* overlay = new PSPixelOverlay[nSpotChannel];
for(int i = 0; i < nSpotChannel; i++){
 if( i != (nSpotChannel - 1) )
 overlay[i].next = overlay + i + 1;
 else
 overlay[i].next = NULL;
 overlay[i].data = gChannelData + (4 + i) * nPlaneBytes;
 overlay[i].rowBytes = gProxyRect.Width() * gDocDesc->depth / 8;
 overlay[i].colBytes = 1;
 overlay[i].r = 230;
 overlay[i].g = 161;
 overlay[i].b = 174;
 overlay[i].opacity = 255;
 overlay[i].overlayAlgorithm = kStandardAlphaOverlay;
pixels.pixelOverlays = overlay;
Then, Seeing red part, it will trigger a new problem, that is how to get the color value of the alpha channel by plung-in itself? It seems that no channel color value info is in FilterRecord.
If you have other solution, please tell me. Many thanks!

This is what I've been doing - was just curious if there was a way to see a more cohesive image.
If the individual EQ plugins are in fact the answer, is there any way to smooth how the Analyzer displays? The image I posted above, all of the tonal curves are very smooth. The analyzer tool shows a lot of peaks and valleys within the overall curve and it's hard to pinpoint each instrument's "sweet spot." Vocals for example are very hard to spot.
- Morgan

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

How to display multiple tables from database using netbeans swing gui

plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

How to display every other images in image indicator

Hi All,
I am using IMAQ to grab and save high freq and high resolution images. I have an image indicator directly from "Image Grab Acquire". So, the image indicator is displaying every single images at a very high frequency too. We have to display frames, but not necessarily every single one (enough so the operator can see what's going on). So, I am wondering how I can display, say every other images (such as all odd/even number of images), or jump over two and display the third?
Any help will be appreciated!
Thanks!
Wenlong
Solved!
Go to Solution.

Here are some general comments.
Image acquisition is "a horse of a different color" -- unlike many other I/O devices, the memory that holds the data (here called the "buffer") is managed by the driver, and isn't directly available to LabVIEW.
I'm guessing that you are using NI Video hardware, as you are using IMAQ functions (I've only used IMAQdx). Is this true? What camera are you using?
The IMAQ Extract Buffer (probably) "clocks" itself to the camera (I say "probably" because I don't know the hardware you are using). This means that the While loop containing it will run at the frame rate of the camera (hence you can easily calculate the frame rate, as your code shows).
This looks like an NI Demo routine, so I'm guessing that you don't have a lot of experience with Vision processing. If you've got a lot of other LabVIEW experience, you should be able to make the leap to vision, once you get the idea of how buffers work. Unfortunately, there's not as much in the way of tutorials and white papers on Vision as on other LabVIEW topics.
So to your question -- how to display every Nth image. Here's the key loop (which is lifted directly from your code):
As menioned above, this routine is "clocked" by the Extract Buffer function. What you do to display every N'th image is to put the Image control inside something like a Case statement that "fires" every Nth time.
Here's an "Nth" version of the above loop (some details omitted) --
We still drive the loop filling every buffer with a frame. But we then use the Integer Divide function to select the Nth image (those that have a remainder of 0 when i is divided by Nth) and wire the "image" line (it doesn't really hold an image) to the "Image" control, with the other case being "Default" (so all other valeus go there) and with nothing inside. Thus every Nth time through this loop, the output of Extract Buffer is wire to an Image (and displayed), the other N-1 times the wire goes nowhere.
Bob Schor

How to display multiple page images in forms ?

Similar Messages

Maybe you are looking for