How to display multiple signals on the same chart/graph

Hello,
I have a text file that has 21 different signals acquired through NI DAQ. I am able to read the file and display on the chart but the problem is all the signals have the same dynamic range -6 to +6 so when plotted they all show up on top of each other and one cannot really discern whats going on. Please see the attached image.
I am trying to ask the community for help on how could I display all 21 signals separate from each other so that the user can easily differentiate between signals. I thought about adding offsets to the signals but I dont really want to change the actual data and the data set is already large enough that I donot want to creat copies of data.
I am running Labview 10.0.
Any creative ideas.
Attachments:
Graph Question.PNG ‏19 KB

Using Stack Plots was my first thought too but it appears to be buggy these days. I know I've used it before with no problems but I can't get it to work now at all. In any case, stacking 21 plots will be futile since you won't be able to see any detail (unless you have a VERY tall monitor). Your best bet is to use property nodes to make the plot of interest become highlighted in some way.
EDIT: I think stacking only works with charts. You can select it on the right-click pop-up menu. Then, expanding the plot legend determines the number of stacked plots shown. Again, since there is so much wasted vertical space when stacking, you'll never be able to see 21 plots concurrently with any detail visible.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Similar Messages

How to display multiple reports at the same time

Hi,
I'm trying to display multiple reports at the same time, each one in separates tabs or windows using Forms 11g 11.1.1.6
I have a button which has a call to a procedure which makes use of rp2rro library to show the specific reports, for example:
call_report('report1');
call_report('report2');
call_report('report3');
call_report('report4');
The main problem is that, just the last report is been displayed.
Is there some way to display report1, report2 etc in separate tabs or windows ??
Regards
Carlos

You shouldn't have a problem calling different reports at once. As long as you're using Forms 11g they show up in different windows.
The question is how you are calling the report.
Here is how I manipulate it.
After I pass parameters with the ADD_PARAMETER built-in I set some key values (destype, desformat, desname) with the RP2RRO's procedures.
Finally calling RP2RRO.RP2RRO_RUN_PRODUCT and then WEB.SHOW_DOCUMENT passing the correct procedure parameters the report comes up in a window. If you repeat the above changing the appropriate variables (the report_name in the RP2RRO_RUN_PRODUCT and so on) you can get multiple reports in different windows.

How to integrate bing map for including or displaying multiple locations at the same time

how to integrate bing map for including or displaying multiple locations at the same time

Have you aware of the geolocation field that's been introduced with SharePoint 2013? You can store location data within a list and then integrate this within Bing. The second tutorial on this Bing team blog will show it well.
https://www.bing.com/blogs/site_blogs/b/maps/archive/2013/03/26/connecting-a-sharepoint-list-to-bing-maps.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to use multiple proxies at the same time?

im planning to use multiple proxies at the same time on mac but i have no idea how to do it?!. i need help!thanks!

How to manage multiple sizes of the same image?

I recently took up LightRoom for all the good things it does. One of the things I need to do, however, is to create and manage multiple sizes of the same image needed for different purposes. I always found this cumbersome. I totally expected that the LR library would offer a solution for this but I looked and I didn't see anything. Sure you can export and resize in the process but then you're on your own. Am I missing something? Isn't there a better way? What does Adobe have in mind for best practices and how do you handle this?

I can't speak for 99jon, but when I need multiple sizes, I export at the desired sizes, and then make use of the exported photos (upload, e-mail, whatever) and then delete the exports. Thus, there's really no need for me to keep track of the photo at this specific size, knowing that if I ever need it again -- unlikely -- I can regenerate it with the export pre-set, so I put no effort (zero!) into keeping track of photos at different sizes.
The idea of adding it back into the catalog doesn't get me excited, and I would advise against it. I don't need this, and I don't see the benefit of keeping this particular size export for the long-term. As I said, I can always recreate it — but maybe you have such a need to keep these exports long-term and recreating it at a later point in time doesn't meet your needs? Can you explain?
By the way, you can't resize a virtual copy, so that won't work here. The only time you can resize is on export.

Can Numbers Display Multiple Views of the Same Table

Hi,
Excel and Appleworks both have a pull down tab on the vertical bar allowing multiple views into the same spreadsheet (table). Can Numbers do this?
I have a set of calculations at the top of a spreadsheet that are based on years and years worth of data under the calculations (same column). I add data for each new event (the rows) and watch the calculations at the top of the data. Easy to do in Excel or Appleworks, but, I can't figure out how to do this in Numbers.
Example:
Spot1 Spot2
Total 15 36
Avg 5 12
Jan 09 5 10
Feb 09 6 20
Mar 09 4 6
Apr 09
So... does Numbers allow the view "split" or multiple views that Excel and Appleworks allow?
Thanks!
Tom

Question asked and responded several times:
feature unavailable.
For multiple views of a table there is an easy workaround as we may build a table whose every cells grab their contents from the 'master' one.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) mardi 1 septembre 2009 21:56:42

HT3529 How to delete multiple messages at the same time?

I'm new with and IPhone I try to delete multiple messages at the same time. and I can't find how to do this.

Email messages? Tap the edit button...tap each message you want to delete...hit delete...once in trash, tap edit, then tap delete all.

How to configure multiple clusters on the same machine.

I am attempting to configure multiple clusters on the same set of machines. I have set the cluster name and multicase IP addresses to be different for each cluster. However I am still getting and error that states:
"This indicates that there are multiple clusters on this network attempting to use overlapping network configurations."
Is this not possible? If it is possible, is there some further way i need to tell the VMs they are part of different clusters?
Thanks,
Jacob

FYI: I'm using the wrong multicast IP above. 224.0.0.1 is reserved and something else should be used. See:
Re: UDP flood hosed my LAN?

How to use multiple Interfaces for the same BS?

Hi @ ,
Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
Any help will be highly rewarded
Regards

Hi-
Yes it is possible you can use multimapping for mapping the interfaces.
To know more about multimapping see
http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
Some more helpful links
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

How to avoid multiple session for the same username

I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

In OEM 12c, how to manage multiple incidents at the same time?

Hi,
Is there a way to manage multiple incidents at the same time? For example, if I want to assign owner for multiple incidents in the incident manager, is there a way to do this? Thanks for the help.

This is currently not supported. This support will be available as part of the next patch set release.
Please note that you can use Incident rules to assign owners to incidents as they come in or get updated.

How do I display multiple seasons of the same TV Show?

I have two seasons of the same TV Show which displayed fine, including artwork. But when I purchased the latest season of Stargate Atlantis (Season 4) it displayed the new episodes in the same grouping as Season 3. Additionally, it replaced the Season 3 artwork with Season 4. How do I replace the Season 3 episodes with the correct artwork? How do I display the Seasons separately, but sequentially, the same way Music albums are grouped and displayed?

What version of iPhoto?
The general process is to select the photo and print, select the printer, paper size and print size and click customize and under settings selec multiples copies of a photo (the preview will reflect this choice) and click print to print, make any printer specific selections and click print to print
LN

HOW do you display multiple componants with the same id e.g. same generated image

Hi,
I would like to display two of these with the same id (canvas) which is an image generated through AS
    <canvas:DrawingCanvas id="canvas" >
        </canvas:DrawingCanvas>
This is an annotation program im working on, and i would 2 of the same view of image, the reason being that the user can view a large and small scale version of the image he/she is working with
I--------------------I    i----i   - small version
I                        I    i----i
I large version   I
I                        I
I____________I
thanks
art

You don't need the object to have the same id to achieve your desired results, and you can't have the same object with the same id anyway.
Just ensure whatever the user does is carried out on the larger and smaller image.
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

How to display multiple signals on the same chart/graph

Similar Messages

Maybe you are looking for