How to Display my Form in the selection screen.(without print format)

Hi all,
I did one gate pass form and i want to view the form in my selection screen or output screen(just in monitor) as a display by giving one Z-code.
i.e, we can view the form thru Print preview...the same preview, i want to display after i give my parameter in the selection screen.
For example.ZGPOUT if i enter as a t-code.
it should ask my Gate Pass number in the Selection screen...if its right then my Form will come out to the display screen. (instead of going by Print method).,
Pls post ur comment and reply me with examples,if possible.
thanks & regards
sankar.

Hi Prasad,
Pls refer the below link.
<< Moderator message - Point begging removed >>
http://wiki.sdn.sap.com/wiki/display/Snippets/Displayimagesontheselection-screen
Thanks
Arjun
Edited by: Rob Burbank on Aug 17, 2011 2:24 PM

Similar Messages

How to include Navigational attribute in the selection screen

Hello All,
Can any body please tell me how to include a navigational attribute in the selection screen in BEX?

Let´s go step by step.
In your example, you mentioned the characteristic called 0MAT_PLANT. Its navegational attributes are allocated in the same dimension the main characteristic belongs. So 0MRP_CONTRL, as a navegational attr. must be allocated in the same dimension as 0MAT_PLANT.
1) In query designer in Bex (left pane) find the dimension where 0MAT_PLANT is allocated. Find the navegational attr. in the same dimension, 0MRP_CONTRL. Pls verify you are looking to a navegational attribute, activate technical names and the name of the attr must be 0MAT_PLANT__0MRP_CONTRL.
2) Below the attribut (still left pane) you will find a Variable icon (yellow). If you see the "+" symbol, it means that at least one variable exists (standar or not). Open it and check if the variable suits your requeriment to set it in selection screen. If not, create a new one (let me know if you need help with this task).
3) Once you have your variable for the navegational attribute, drag and drop it to the design area (row, column, filter).
4) Verify the order you want this variable to appear from the menu bar: Query properties -> Sequence of Entry Variables.
Hope this helps. Leticia
Edited by: Leticia Laura Locatelli on Oct 1, 2008 10:41 PM

How to put F4 facility in the selection screen using

HI Experts,
i have a query ..
i want to put F4 facility in the selection screen and The F4 help for the order number (chvw-aufnr) on the selection screen should be the same like the F4 help for order number in transaction COOIS.. PLease provide support in this regard.
Its urgent..An early reply will be highly appreciated.
Regards.
Neeraj

See the following ex:
TYPES: BEGIN OF TY_MBLNR,
 MBLNR LIKE MKPF-MBLNR,
 END OF TY_MBLNR.
DATA: IT_MBLNR TYPE STANDARD TABLE OF TY_MBLNR WITH HEADER LINE.
data: it_ret like ddshretval occurs 0 with header line.
At selection-screen on value-request for s_mat-low.
Select MBLNR from mkpf into table it_mblnr.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
DDIC_STRUCTURE = ' '
 RETFIELD = 'MBLNR'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
 VALUE_ORG = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
 TABLES
 VALUE_TAB = IT_MBLNR
FIELD_TAB =
 RETURN_TAB = IT_RET
DYNPFLD_MAPPING =
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF SY-SUBRC = 0.
 read table it_ret index 1.
 move it_ret-fieldval to S_mat-low.
ENDIF.

How to assign F1 help to the selection screen fields

Hi All,
I have a requirement.I have to create a button named "HELP" at the side of Execute button in the selection screen.If I place my cursor in the selection screen field and I press that "HELP" button, I should get the Documentation help for that field.
Please suggest me on this.
Thanks in advance.
Sreeharsha Singuru

Hi sreeharsha,
here a short example:
TABLES: MARA.
TABLES: SSCRFIELDS.
TYPE-POOLS: ICON.
DATA: CURSORFIELD(20).
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
SELECTION-SCREEN: END   OF LINE.
SELECTION-SCREEN: SKIP 3.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: PUSHBUTTON (10) PB01 USER-COMMAND HELP.
SELECTION-SCREEN: END   OF LINE.
AT SELECTION-SCREEN.
GET CURSOR FIELD CURSORFIELD.
CASE SSCRFIELDS.
    WHEN 'HELP'.
      CASE CURSORFIELD.
        WHEN 'S_MATNR-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MATNR-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
        WHEN 'S_MTART-LOW'.
          CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT' "Make your own Text
            EXPORTING
              TITEL        = 'Information'
              TEXTLINE1    = 'Information for field:'
              TEXTLINE2    = 'S_MTART-LOW'
              START_COLUMN = 10
              START_ROW    = 15.
      ENDCASE.
ENDCASE.
INITIALIZATION.
CONCATENATE ICON_INFORMATION 'Help' INTO PB01.
START-OF-SELECTION.
SELECT * FROM MARA WHERE MATNR IN S_MATNR.
    WRITE: / MARA-MATNR.
ENDSELECT.
Hope it helps.
Regards, Dieter

Is it possible to display a tag at the selection screen in the output.

Hi all,
   When you go to se38 and in the program editor screen, at the bottom right end of the screen you find a value called NUM and when you place your cursor on that it displays a tag that says "Num Lock Mode. Double click to toggle."
   My query is, when i execute a report it takes me to the output screen that has a parameter, here i want to display a tag, say "enter the record as it is in the database". Is it possible to have such an option.
   If you'll are wondering why I'm looking for such an option it is just to make a report that can be understood by many.
P.S: Not only on the NUM field the tag is available. Even on tools like activate display and so on.
Regards,
Narayanan Chandran.

If it's a report program, use a comment in the selcetion screen for information of the user as shown below.
* Information
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-003.
SELECTION-SCREEN COMMENT /1(60) text-004. "Text containing the information message
SELECTION-SCREEN END OF BLOCK b1.
If you are using a module pool, you can create a tooltip for the element as suggested.

How to Display key/text in default selection screen?

HI Gururs,
I want to display key/text in variable default selection screen in BI Analyzer in Quality.
please give me any suggestions to resolve this.
Thanks
vadlamudi

hi,
What i have done is in the cube level, in the dimensions i have made specific properties and set to key/text in development, so its working fine in development of the analyzer, but still its showing text only in quality analyzer.
please give me the solutions if you know any.
regards
vadlamudi

How to add a field to the selection screen and when the user enters ...

hi all,
can any one plesase send the code of how to add a field to seletiion screen and when the user enters in the field , it should be store in the database table , the table is MKPF and the field is BKTXT. Thanks.

Hi Kripa,
   If u r using PNP ldb then the screen u will get is the screen for that ldb and if u want to add some more fields then u define using selection-screen..as follows
SELECTION-SCREEN BEGIN OF BLOCK mysel WITH FRAME TITLE text-111.
PARAMETERS: n_in_en RADIOBUTTON GROUP g1,
            q_ev RADIOBUTTON GROUP g1.
SELECTION-SCREEN END OF BLOCK mysel.
SELECTION-SCREEN BEGIN OF BLOCK mysel1 WITH FRAME TITLE text-222.
PARAMETERS: r_date TYPE sy-datum DEFAULT sy-datum.
SELECTION-SCREEN END OF BLOCK mysel1.
SELECTION-SCREEN BEGIN OF BLOCK mysel2 WITH FRAME TITLE text-333.
PARAMETERS:f_ver(3) TYPE c DEFAULT 1,
           c_no(10) TYPE c DEFAULT '9D0161',
           u_id(15) TYPE c,
           password(15) TYPE c,
           r_email(30) TYPE c DEFAULT PARAMETERS: s_not TYPE c AS CHECKBOX.
PARAMETERS:t_run TYPE c AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK mysel2.
SELECTION-SCREEN BEGIN OF BLOCK mysel3 WITH FRAME TITLE text-444.
SELECTION-SCREEN BEGIN OF BLOCK mysel4 WITH FRAME TITLE text-555.
PARAMETERS: p_ser RADIOBUTTON GROUP g2,
a_ser RADIOBUTTON GROUP g2.
SELECTION-SCREEN END OF BLOCK mysel4.
SELECTION-SCREEN BEGIN OF BLOCK mysel5 WITH FRAME TITLE text-666.
PARAMETERS:p_path TYPE string.
SELECTION-SCREEN END OF BLOCK mysel5.
SELECTION-SCREEN END OF BLOCK mysel3.
u will get this additional screen after the screen of ldb.
I hope this will help u..
Thanks & Regards
Ashu Singh.

Program displaying technical codes in the selection screen during execution

Hi Gurus
I am facing problem during the execution of the newly created program that during execution of program selection screen is displaying technical codes.
from where to change the settings so that it should show the description
Regrads
Manvir

Hi ,
goto se38 ..give ur code name and select change...now on the top u will see Goto..
follow this path Goto >Text Elements > Selection text.
Now you can give the name u want..
regards,
Anuj

How to get required fields in the selection screen while filling a set tabl

hai,
i was filling the set up table for 2lis_13_vditm.but while filling the set up table in the selection conditions in the tcode OLI9BW.
I would like to have the a field added in the selection condition which is not existing in the OLI9BW.
kindly help me out of ths.
with regards
soumya.

As far as I know, you're just limited to whatever fields are in the transaction... That applies for any of the setup tables processes.
If you need to limit the data that goes to BW, you can do so by putting the logic in CMOD, EXIT_SAPLRSAP_001, Include ZXRSAU01 for the specific extractor.

How can we display below mention control in the selection screen

I want to display a container in the selection screen. (the container which we can use/get in the alv out put when we select a ascending/decending sort buttons for filtering of sort order).
thanks in advance.
sree

simply at selection-screen output. event do the following coding.
1. create a docking container
2. create you control on to the container.
create object docking
exporting
repid = repid
dynnr = sy-dynnr side = cl_gui_docking_container=>dock_at_right
extension = '200'
exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
if editor is initial.
create object editor exporting parent = docking
 wordwrap_mode =
 cl_gui_textedit=>wordwrap_at_fixed_position
 wordwrap_position = 256
 max_number_chars = 100000.
endif .
Regards
Raja

To display the selection screen variant name in WAD report output.

Hello experts,
I have a requirement which is to display the selection screen variant description in the output of the WAD report.
I managed halfway, by using the object "Information field", which displays all the values which are selected by the variant.
Example:I have created a cost center report created using WAD, since I need some graphical displays..
In the selection screen, I have the characteristic "cost center" as input field. I have created a variant " GM - IT" which will include few cost centers managed by GM. In the output, I want the dispaly to be "Cost center - GM IT". Currently it displays "Cost Center - a,b,c,d" as the values a,b,c,d are the values from the variant name "GM-IT"
Please let me know if this required any java script. I am not familiar with java / html codes and any help would be much appreciated (and rewarded)
Thanks in advance
KS

Hi,
Try this.
If you want to include your variables in your WAD means you have to choose "Force Variable Screen" option to be in enabled condition.
TO enable this,in WAD select your Template(New Template1) click the WEBITEM , it'll shows all generic properties , here you can enable this "Force variable screen"
Save and execute your WAD now you can get your variable screen.
Thanks,
JituK

How to limit the search help in the selection screen?

Hi All,
I got a selection option in a selection screen,
say SELECT-OPTIONS KSCHL FOR VAKE-KSCHL.
I want to limit the output list of the search help of this field, e.g. 33 entries for a specific application and usage.
What should I do ?
Thz.

Hi,
U can check with these two
... NO-EXTENSION
Effect
The user can only make an entry on one line. Calling the additional "Multiple Selection" screen is not supported and no pushbutton for this appears on the selection screen.
Addition 12
... NO INTERVALS
Effect
The selection option is displayed on the selection screen without a 'to' field. The pushbutton for calling the "Multiple Selection" screen appears immediately after the 'from' field.
This addition thus allows you to generate a simplified display on the selection screen. This is particularly useful if you are not making any range selections for this selection option.
Notes
On the "Multiple Selection" screen, you can also enter ranges for selection options with "NO INTERVALS".
By combining this addition with "NO-EXTENSION", you can restrict the user to entry of a single value for the selection option, but with the possibility of also choosing single value options like 'Greater than' or 'Less than or equal'.
By using the addition " NO INTERVALS" with SELECTION-SCREEN BEGIN OF BLOCK, you can activate the simplified display for all selection options in a block.
The function module SELECT_OPTIONS_RESTRICT allows you to restrict the set of selection options available for a SELECT-OPTION (for example, only single values and patterns, i.e. 'EQ' and 'CP' are allowed). You can also forbid the leading sign 'E' (= 'Exclude from selection'). This means that you can considerably restrict the selections which can be entered on the selection screen.
Just now tried it out to limit the search help u have to use NO-EXTENSION.
Try this simple code.
Tables: mara.
SELECT-OPTIONS: s_matnr FOR MARA-matnr NO-EXTENSION.
Hope this helps.
Kindly reward points and close the thraed if ur problem got solved.
U havent rewarded any points?
Message was edited by: Judith Jessie Selvi

Related to Displaying picture on the selection screen

Hi ,
I had a requirement where i had to display a picture on the selection screen, so i used the methods set_position and load_picture_from_url of the class cl_gui_picture to archive this, but now my selection screen has extended to more than one page because of this if i scroll down on the selection screen the picture is not scrolling it is remaining static to the screen ( i.e. if i place it (10, 10) after scrolling also it is still remaining at (10 , 10) with respect to the new screen) is there any way i can scoll the picture also i.e. it also moves up along with the screen?

There could be one option : create one screen and load your picture on that screen.
Within your selection screen, call the screen created above.

Push button in the selection screen

Hi folks,
          I need to display a push button the selection screen.its not on the application tool bar..but in one of the selection block in the selection screen..could anybody guide how to do this...
           Thanks in advance,
           shyam.
Edited by: shyam prasad on Jan 15, 2009 7:34 AM

Hi Shyam,
Try the following code..
TABLES sscrfields.
TYPE-POOLS icon.
*SELECTION-SCREEN:
BEGIN OF SCREEN 500 AS WINDOW TITLE title,
    PUSHBUTTON 2(10) but1 USER-COMMAND cli1,
    PUSHBUTTON 28(30) but2 USER-COMMAND cli2
                           VISIBLE LENGTH 10.
END OF SCREEN 500.
AT SELECTION-SCREEN.
CASE sscrfields.
    WHEN 'CLI1'.
    WHEN 'CLI2'.
ENDCASE.
START-OF-SELECTION.
title = 'Push button'.
but1 = 'Button 1'.
CALL FUNCTION 'ICON_CREATE'
    EXPORTING
      name   = icon_information
      text   = 'Button 2'
      info   = 'My Quickinfo'
    IMPORTING
      RESULT = but2
   EXCEPTIONS
     OTHERS = 0.
Hope it will be useful..
Regards,
Lakshman.
Edited by: Lakshman N on Jan 15, 2009 7:39 AM

I need to get an icon on the selection screen as well as selection text .

HI ,
 Can anybody please tell me how to get an icon in the selection-screen along with the selection texts written for select-options or parameters.
For Example:
 Select-Options: S_WERKS For T001w-werks,
 S_AUART For TVAKT-AUART,
 S_ERDAT For LIKP-ERDAT.
IN THE SELECTION TEXTS:
 FOR S_WERKS i write (WareHouse)
 FOR S_AUART i write (OrderType)
 FOR S_ERDAT i write (PlantDate)
 I need to get the icons for this fields as well as selection texts written for these fields.
I will reward full points to the solution.
Mohan.

Hi mohan,
Run the below code
Report zex33.
tables : t001w,
 tvakt,
 likp.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
select-options: S_WERKS For T001w-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
select-options :S_AUART For TVAKT-AUART.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
select-options : S_ERDAT For LIKP-ERDAT.
selection-screen end of line.
initialization.
write ICON_WAREHOUSE as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_ORDER as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_PLANT as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.
*In text-001 -> Warehouse
*In text-002 -> Order Type
*In text-003 -> Plant Date

How to Display my Form in the selection screen.(without print format)

Similar Messages

Maybe you are looking for