How to display notification message in EBS R12

Hi all,
I am new to apps dba, any explanation in detail is appreciated. I want to display a site level message on EBS R12. So that whenever a user logs in he can see my message like 'Happy Independence Day'. Let me know how to do that.
Regards,
Charan.
Acquiring knowledge is ultimate,sharing it is unique

Hi;
Please check below thread:
Notification-Send a message to user like system will be down
display the alter messages for the use
Regard
Helios

Similar Messages

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

How to display a message dialog box

I need to know how to display a message box from my application.
Anyone can help me?
Thanks in advance

Dear Zennen,
Use JOptionPane.
Ex
JOptionPane.showMessageDialog(this,"message","title",JOptionPane.INFORMATION_MESSAGE); Thanks
Joey

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the Message Pool Messages in CE 7.2

Hi Experts,
Please let me know how to display the Message Pool Messages in CE 7.2.
I have tried with reportContextAttributeMessage, but it is deprecated in CE 7.2.
Please do the needful.Its Urgent.
Thanks & Regards,
SatheshKumar R

Hi Sathesh,
Do the following steps:
1.) After creating a component, under it you will see Message Pools. Double click and open it.
2).Click "Add Message" and add a new message. (Give a message key, type of message (either warning, error etc ) and message text).
3). Save the metadata.
4). Raise this message where all you want by using following code(For example, on click of a button) :
 IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
 msgnr.reportMessage(IMessage<component name>.<message>,null,true);
For example, I have a component name TestAppComp and under message pool I have message called message1, then use lik this:
 IWDMessageManager msgnr = wdThis.wdGetAPI().getComponent().getMessageManager();
 msgnr.reportMessage(IMessageTestAppComp.MESSAGE1,null,true);
Reply me if you any doubt.
Regards,
Jithin

How to Stage directory for Oracle EBS R12.1.1 on Window Server 2008 ?

Hi Every Body,
1- How to Stage directory for Oracle EBS R12.1.1 downloaded from e-delivery.com on Window Server 2008.?
-- I have download all files from e-delivery and check the md5 and all files are OK.
I extracted the entire files with winrar program to the same directory and during the unzipping I was notified to replace these files (dvd.label and component.label) and I agreed each time. So >>
2- Was that a problem ?
-- I have setup vc++ from VS6 , the sp6, cygwin , ... and set up the active directory and the domain.. and all other requirements.
BUT when i started the ebs set up it raise the "*Os User and Group Check*" error.
even if I am the only user and sure I am the Administrator. and also I run this Command to be sure
C:\>net localgroup administrators and it said that the administrator is one of the administrators group.
3- Somebody said that I have to change the temp and tmp folder to be on c:\ drive >> might this solve the problem?
thanks in advance.

Hi,
Most of the instructions you have mentioned , already was configured.
except for the tmp and temp directories.
And even I changed them from System Properties >> Advanced >> Environment Variable under User variable for Administrator and System variables , the problem still exist Os User and Group Check .
I attach the conf_VIS.txt file because I thought it may help.
http://www.4shared.com/document/1bS6aio5/conf_VIS.html
Actually I am not sure about the rapid install patch version but I have download the EBS R12 from the following link and I think it contains the recent installer version
Link >> Oracle E-Business Suite Release 12.1.1 Media Pack for Microsoft Windows (32-bit)
http://edelivery.oracle.com/EPD/Download/get_form?egroup_aru_number=11250138
Note If you still can not open the link just suggest a suitable file hosting and I will upload to you. here I used 4shared and hoped it suits you.

How to deploy the goldengate on EBS R12

EBS : R12.1.1
ORACLE DATABASE : 11.1.0.7
OS version : AIX 6.1
The source environment and the standby enviroment are the same.
I want to know how to deploy the goldengate on EBS R12 , not for reporting , only just for Disaster recovery .
I have read 1112325.1 (Deploying Oracle GoldenGate to Achieve Operational Reporting for Oracle E-Business Suite) , and I think that was not enough .
It was difficult for me , cause there're lots of objects in EBS , and what should be notice , for example , the triggers , the sequences , and so on .
Had anybody done this before or deployed this sort of thing , please give me some advice and help .
Any help will be appreciate .
Thanks,
Brook

Do you want to configure standby database only? If yes, please refer to (Business Continuity for Oracle E-Business Release 12 Using Oracle 11g Physical Standby Database [ID 1070033.1]).
Thanks,
Hussein

How do you display the tables of EBS R12 (VIS)?

Hi,
My sqlplus does not work but I have an Oracle sqldeveloper. How do you display the tables info of order management module in EBS R12 for windows?
For example:
Base tables
oe_order_headers_all
oe_lines_all
oe_lot_serial_numbers
oe_sales_credits
oe_price_adjustments
Interface tables:
OE_HEADERS_IFACE_ALL
OE_LINES_IFACE_ALL
OE_RESERVTNS_IFACE_ALL
OE_CREDITS_IFACE_ALL
OE_PRICE_ADJS_IFACE_ALL
OE_LOTSERIALS_IFACE_ALL
OE_ACTIONS_IFACE_ALL
Thanks,
Fernando

Hi Fernando,
The tables for Order Management will mostly be in ONT schema - APPS schema only holds Views, Synonyms, PL/SQL Packages and similar abstractions.
In SQL Developer make a connection to the APPS schema, then go to Synonyms and you'll see the tables (note you should filter as there are lots of objects in Apps schema)!
In the synonym SQL tab you can see the base schema for the table, e.g.
CREATE OR REPLACE SYNONYM "APPS"."OE_ORDER_HEADERS_ALL" FOR *"ONT"*."OE_ORDER_HEADERS_ALL";
Make a connection to the base schema, e.g. ONT.
Then you'll see the ONT tables under the Tables folder.
Alternatively, connect as apps and execute SQL "desc OE_ORDER_HEADERS_ALL"
Or look at the APPS schema views instead, e.g. OE_ORDER_HEADERS
Regards,
Gareth
Edited by: gareth.roberts on Aug 18, 2009 11:52 AM

How to display success message when data is changed in the custom tab in MM

Hi,
I have added a new custom data tab in the MM01/MM02/MM03 transactions. Whenever I do changes to fields in the custom tab in MM02 transaction, and no changes in the standard tabs, I will get a message stating "No Changes Made".
But if I do changes in the standard tabs, it works as usual with display of message "Changes to particular material has been done.
Please let me know, if anyone of you know, how to display the success message if the changes to the custom tab is done.
Thanks in advance,
sudhanva

Hi Sudhanva,
The exit EXIT_SAPLMGMU_0001 is a function exit that you can use for custom validation but not to add custom tab/screen.
But the message issued by SAP is not related to this Function Exit.
If you have used a Screen Exit, then there must be some Function Exits also in the same Enhancement using which you can assign the value of custom fields to/from the standard structure. Thus when the value of any custom field is changed the system can understand that the some changes have been changed and will not issue the message.
In case you have used a BADI, there can be other methods in the BADi using whcih you can assign the value of custom fields to/from the standard structure. This might also prevent the message from being displayed.
I could try giving you further details if you can provide the name of the Enhancement/BADi that you used to add the additional tab.
Hope this helps.
Regards,
Abhisek.

How to display a message box in a UIX JSP page?

I've a UIX JSP Application with BC4J developed with JDeveloper RC.
The problem is that when the user mistakes in the insertion/updating, I'd like to help him displaying a message box or a modal dialog window.
In particular, I've the following code:
<%@ page errorPage="errorpage.jsp" contentType="text/html;charset=WINDOWS-1252"%>
<%@ taglib uri="/webapp/DataTags.tld" prefix="jbo" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui" prefix="uix" %>
<%@ taglib uri="http://xmlns.oracle.com/uix/ui/bc4j" prefix="bc4juix" %>
<%@ page import="oracle.jbo.JboException" %>
<%@ page import="CdssPackage.*" %>
<%-- Define Application Module and DataSource--%>
<%-- Define Application Module and DataSource--%>
<jbo:ApplicationModule configname="CdssPackage.CdssPackageModule.CdssPackageModuleLocal" id="app1" username="scott" password="tiger" releasemode="Stateful" />
<%
//Check the mandatory fields are not null
if ((cod_comm.compareTo("")==0) || (nome_ruolo.compareTo("")==0)){
throw new JboException(Errors.ERR_REQUIRED_FIELD);
//Now, the errorpage.jsp is displayed, while I'd like to display a message box or a modal dialog window
%>
How can I do it?
Thanks in advance.

Michele-
You can use javascript to send a message window in the http protocol.
Hope this helps,
Lynn
Java Tools Team

How to display a message after button press ?

Hi,
I created a jspx page with a button.
When that button is pressed, a lot of stuff is going to happen in my backing bean.
This can take up to 30 seconds. (soap call etc ... )
Meanwhile, the pressed button stays greyed out. When the action is finished, the button
is available again.
I want to display a message saying the action was succesfull or not, after that button is available again.
Can anyone help me how I can make this ?
Greetz.

Why not opening a popup from your backing bean?
Add a popup to your page:
<af:popup id="yourID" bindings="#{yourBean.popup}">
</af:popup>Open this in your backing bean:
 public void OpenPopup(String popupID) {
 FacesContext facesContext = FacesContext.getCurrentInstance();
 ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
 service.addScript(facesContext,"AdfPage.PAGE.findComponent('"+this.getPopup().getClientId(facesContext) + "').show();");
 }This way you can add anything you want in your popup. forms, messages, images,...

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
 rec(150) type c,
 end of tdata,
 begin of tmtgp,
 costcent LIKE CCSS-KOSTL,
 costelem LIKE CCSS-KSTAR,
 fisyear LIKE CCSS-GJAHR,
 jan(10),
 feb(10),
 mar(10),
 apr(10),
 may(10),
 jun(10),
 jul(10),
 aug(10),
 sep(10),
 oct(10),
 nov(10),
 dec(10),
 end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
 exporting static = 'X'
 changing file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(04)'
 fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
perform bdc_field using 'KPP0B-VALUE(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field using 'KPP0B-VALUE(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP0' '1000'.
perform bdc_field using 'BDC_CURSOR'
 'KPP0B-VALUE(04)'.
perform bdc_field using 'BDC_OKCODE'
 '=CSPB'.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(01)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jan to fieldval.
perform bdc_field using 'Z-BDC03(01)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(02)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-feb to fieldval.
perform bdc_field using 'Z-BDC03(02)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(03)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-mar to fieldval.
perform bdc_field using 'Z-BDC03(03)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(04)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-apr to fieldval.
perform bdc_field using 'Z-BDC03(04)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(05)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-may to fieldval.
perform bdc_field using 'Z-BDC03(05)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(06)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jun to fieldval.
perform bdc_field using 'Z-BDC03(06)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(07)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-jul to fieldval.
perform bdc_field using 'Z-BDC03(07)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(08)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-aug to fieldval.
perform bdc_field using 'Z-BDC03(08)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(09)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-sep to fieldval.
perform bdc_field using 'Z-BDC03(09)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(10)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-oct to fieldval.
perform bdc_field using 'Z-BDC03(10)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(11)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-nov to fieldval.
perform bdc_field using 'Z-BDC03(11)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '/00'.
Write imtgp-dec to fieldval.
perform bdc_field using 'Z-BDC03(12)'
 fieldval.
perform bdc_dynpro using 'SAPLKPP2' '0110'.
perform bdc_field using 'BDC_CURSOR'
 'Z-BDC03(12)'.
perform bdc_field using 'BDC_OKCODE'
 '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
 exporting filename = filename
 filetype = 'ASC'
 tables data_tab = idata
 exceptions file_open_error = 1
 file_read_error = 2
 no_authority = 6
 others = 17.
 check sy-subrc = 0.
 loop at idata.
 clear imtgp.
 split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
 append imtgp.
 endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
 mode 'N'
 MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
 t_bdcmsgcoll-msgid = <Msg id> AND
 t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
 t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
 t_success-message = g_mesg.
 APPEND t_success.
 CLEAR t_success.
ELSE.
* If there an Error-Do this..
 READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
 IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
 CLEAR g_mesg.
 t_error-msg = g_mesg_incl.
 APPEND t_error.
 CLEAR t_error.
 ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
 t_bdctab.
REFRESH: t_bdcmsgcoll[],
 t_bdctab[].

How to display error message with some variable

Hi
I want to display errror message along with material number which is thr in d LOOP .
Basically i want some variable to display along with error message .
Can anybody suggest me how can i go about it?
Edited by: sonal musale on Apr 14, 2009 12:06 PM

Hi,
In the message class, suppose you use 001 for invalid material message.
So keep it like:-
Invalid Material : &1
in the message class for 001.
Now in loop use as:-
loop at itab into wa.
"perform validations
"if validation fails for current material
MESSAGE e001 WITH wa-matnr.
endloop.
Similary you can use more variables:-
Invalid Material : &1 &2 &3
MESSAGE e001 WITH <variable1> <variable2> <variable3>.
Hope this helps you.
Regards,
Tarun

How to display notification message in EBS R12

Similar Messages

Maybe you are looking for