How to display podcasts as square photo in rows and columns

iTunes 11!!! Ack. Mostly fine, but totally screwed up using podcasts. That is about half of my iTunes usage. Anyway, I can't get podcasts to view like albums as they did in iTunes 10.7. And I can't get podcasts to group together by ratings. I am willing to go back to 10.7, if there is no solution. Can anyone help??

I'd like to update this question, but don't see an option to edit the original.
Can't arrange podcasts according to rating, in iTunes 11!
I would love to have them in rows/columns, as they were in iTunes 10, as well as arrange them according to ratings.
Update: I have been on the phone with Apple support for this issue for 3 days, and the solution is not found or known. Hours on the phone, Restarted my whole Mountain Lion from scratch. Now I can see the "list" option in iTunes 11. That's the only change. And we're not done restoring my Macbook to the original. I even had to run out and by a second 1T external hard drive during this process. yuck. Great dedication by support. Seems like a can of worms, that I wish I had not opened. Hopefull......

Similar Messages

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How to Position image in h:dataTable in Row and Column ?

I have a code that loops from array and populate images, here is the code below
<h:dataTable border="0" id="dataTable" columnClasses="onleft adjustImage, ontop albumDescription adjustImage" rows="0" value="#{album.allImageInAlbum}" var="name" style="height: 64px">
<h:column>
<h:graphicImage value="getimage?file=#{name.imageId}&email=#{name.usEmail}&albumId=#{name.id}"
style="border: 6px"/>
</h:column>
</h:dataTable>
this code easily show me my images in one straight column, I actually want to do like 3 x 2 or 4 x 3.
Is there anyone who can show me in a short code example?
Thank you in advance.

Thank you again BalusC. I used Tomahawk as you suggested and it works great
for the future users who has the same question:
1) put tomahawk.xxx.jar in to your WEB-INF/lib folder
2) configure you web.xml
3) put in your jsp <%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t" %>
this was my code:
               <t:dataList id="dataTable" value="#{album.allImageInAlbum}" var="name">
               <t:column>
               <h:graphicImage value="getimage?file=#{name.imageId}&email=#{name.usEmail}&albumId=#{name.id}"
style="border: 6px"/>
               </t:column>
               </t:dataList>
Thank you again BalusC. :)
Edited by: harddisk on Aug 15, 2008 9:16 PM

Row and column headings-how to print without them

Currently Epson C64 and appleworks 6.2
How can I print the spreadsheet without the row and column headings as there doesnt seem to be a place to choose whether to how or not
Thanks for replies
Whilst writing, too many instances of the coloured wheel rotating, nothoing showing on screen, suddenly whole sentences appear. Very irritating, so how can I stop this ?

I'm glad the AppleWorks info was helpful.
About the colored wheel issue: does this happen in all applications in which you are typing? Are you doing other things in that app at the same time. For instance, if Safari is one of the problematic apps, are you also downloading at the same time? I have seen this issue a few times - very rarely - and have found that a restart usually gets things back to normal. I'm not sure if this will be a helpful workaround for you, but it has had some success.

How to display the total at the end of the column in the report.

Hi all,
Could any one please intimate, how to display the total at the end of the column. For example, i have a column, "sales" as the Key figure, and it has the data for all the transactions. Now, i would like to display the total at the end of the report, below the same column.
Similarly, for all the other columns in the report, i need to display the total for all the columns in the report.
Thanks & Regards,
A.V.N.Rao

Hi All,
Thanks for many suggestions. I tried by providing the "Total" under "Calculate Results as" and also "Counter for all detailed values" under "Calcuate Single Values as", in the "Calculations" tab of the key figure, but i am unable to get the information. Again, i am providing the requirement below:
CHAR - A   CHAR - B   TIME CH. - 1 KF -1 KF- 2 KF - 3
1                     RAM        2012           1         50      50
2                     SAM         2012          2         100    200
Result                                               3           150   250
Assume KF -1 as "Qty." KF-2 as "Price" KF-3 as "Sales".
Please intimate the solution.
Thanks & Regards,
A.V.N.Rao.

How to display 2 dimensional data. i.e with rows and columns?

Hi,
I want to know how to display multiple, variable
rows and columns that are got from the database through
queries in forms.
(i,e. a Matrix of Values,something similar to an Excel Spreadsheet).
Is there a component in forms similar to JTABLE that is
available in Java through which MULTIPLE, VARIABLE
rows and columns can be displayed ?.
I am not using a base table since this data is got thru
a number of packages and procedures that are used in
Loops.
NOTE : I am using forms 6i.
Thanks
Sharath.

I've heard Grant mention adding a Grid component to the Forms toolbox. From the context I would guess this is not yet even under development, so it's not going to be available anytime soon. And not for 6i.
Sorry, APC

How to layout constraint rows and columns "right"?

Hi.
I have a complex constraint layout with 8 columns and 11 rows. Since this layout is not an MXML-file, I need to do it in actionscript. Is there a "best pratice" on how to layout this without the Design view in Flash Builder?
Is it possible to display the columns and rows like in HTML, where I could say "border=1" or use css?
Regards,
Jo

What makes you think that it is not there? Any form which doesn't have the same set of members across rows and dimensions are asymmetric.
Asymmetric rows and columns contain different sets of members selected across the same dimensions
Oracle Hyperion Planning, Fusion Edition Administrator's Guide
I can add a column with only Q1 and then another column with Q2, Q3, Q4 which will make it an asymmetric form. Keep in mind not to check "Place selection in separate columns".
Regards
Celvin
http://www.orahyplabs.com

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

How to increase the row and Column length of Bex query in EP Portal 7.3

Dear All,
Please let me know the process to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Please let settings to increase rows up 10000 and column 100 in one page.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Displaying the Row and Column number in the report

I am trying to show row and column number in the report (not just web preview). I am using Hyperion Reports Version 7.2.5.168

use a formula column/row. use RANK function in that. (e.g. Rank([A], asc) will sort the rows based on column A values in ascending order)
you can use this rank in your heading.
But frankly this is not so easy. You have to do it in a very intelligent way, so that rank gives you column number/row number any how.
Have a try and let see if you find a appropriate solution.
Regards,
Rahul

How can I preserve row and column addresses on multiple cells at once in Numbers?

How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort. I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula. I want to avoid having to go one by one. I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126' I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill. If there is another way to remedy my sorting problem that would also be welcomed!
THANKS!!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

How to create table with rows and columns in the layout mode?

One of my friends advised me to develop my whole site on the
layout mode as its better than the standard as he says
but I couldnot make an ordinary table with rows and columns
in th layout mode
is there any one who can tell me how to?
thanx alot

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3

Dear All,
Please let me know the process how to Increase the Rows and Columns Size of Bex Query in Enterprise Portal of SAP 7.3 .
Currently I am getting Only 4 columns and 10 rows in One Page .And I am getting 1,2 etc tabs for both row and column. So i want to increase the column length more than 100 and row length more than 10000.
Please suggest me a suitable solution to over come this issue.
Please find the Below screen shot.
Thanks
Regards,
Sai

Dear All,
Please find the attached screen shot.
The report be open with 4 or 5 columns and 5 or 6 rows.
So, please let me know how to increase the length of the table.
Do the needful for me to over come this issue.
Thanks
Regards,
Sai.

How to display podcasts as square photo in rows and columns

Similar Messages

Maybe you are looking for