How to display properly the SM59 RFC Trace

Hello,
I would like to see what are the parameter values of called RFC functions via the RFC trace I have activated via transaction SM59 (I am NOT talking of ST05).
The problem is that we get a kind of hexadecimal output (the RFC format I imagine).
I would like the parameter values to be displayed properly.
I don't have any other solution because I have to ask somebody by phone who is quite novice.
Did someone already try to do that? (have a program?)
Thx a lot
sandra

Hi,
please check Pran Bhas' blog <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/986">Log Configuration for a Web Dynpro application</a>.
Best regards,
Martin

Similar Messages

How to display on the graph three or more waveforms where time scale is not an index of array but a real time

How to display on the graph three or more waveforms where time scale is not an index of array but a real time:
I measure three voltages Va, Vb, and Vc on my Test stands every 3sec. So I’m building four arrays (Va, Vb, Vc, Time) and combine all in one.
Time
Va
Vb
Vc
0
5
3.5
2.8
3
4.9
3.6
2.9
6
4.8
3.8
2.1
Now I need to show on the graph in which scale X is “Voltage” and scale Y is “Time”.
How can I do it?
Thanks a lot,
Boris

Hi, thanks all your reply.
You may find "points_to_bar_graph.vi" from this website, I find it by this way.
I will ask a stupid question: I don't have any photo processing software, how can I save the vi into a picture format?
So here I just paste it into word document.
Attachments:
question.doc ‏520 KB
points_to_bar_graph.vi ‏62 KB

How to display all the questions of a survey in a page?

How to create multiple surveys in a survey list?How to display all the questions in a page and provide feedback button for each question?While giving the feedback user can ab. to see posted question date and posted person name.
sindu

Hi,
To display all the questions in a page instead of in a dialog, you can achieve it by using such an URL:
http://yoursite/Lists/survey1/NewForm.aspx?IsDlg=0
You can add a hyperlink with this URL into a page of your site, then you can navigate to the questions page by clicking this hyperlink.
About how to add a hyperlink into a page:
http://sharepoint.stackexchange.com/questions/55543/how-to-add-a-hyperlink-anchor-in-a-sharepoint-wiki-page
If you have several questions to ask, it is recommended to post them into every single thread to make others easier to focus on one question in one thread.
Feel free to reply if there is still any questions.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Displaying metadata, how to display ONLY the Date

I would like to display the Date below each image in Aperture 3. When I select "Date" in the Browser & Viewer Metadata window, the result is a very long string with the Date, the Time and the Time Zone. meaning that most of the time I see nothing because the string is much too long to be displayed...
How to display ONLY the Date ?
Thank you.
Olivier

om28 wrote:
I will do that but still... if the Date could be ONLY the Date "without time and time zone", I would be able to display more information.. and it will look nicer.
I said at the top of my first response above: +Afaik, there is no way within Aperture to change the date format of the date metadata overlay.+
Send Aperture feedback to Apple via "Aperture→Provide Aperture Feedback"
In the past I used Expression Media and the config for displaying such info was better.
Aperture has a strange interface for it (and for other parameters), it does not behave at all like an Apple software (for the GUI), probably an external development team... but I agree it is more complex than iPhoto.
Aperture is 10x more complex than iPhoto.
If you want to see a rigid, boxed, "engineer"-style image database interface, take a look at Lightroom 3. It's a great program -- but it's a very different concept of information presentation and interaction.
Thanks again.

How to display all the surveys using content query web part

Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?

Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display all the under menus options when pressing the main menu on adobe muse?

How to display back the JTable based on the coding??

Hi all,
I don't know how to display back my JTable after i remove it. I want the table to dissapear and reappear in given time. Hope someone can help me. Thanks a lot
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class tableTest extends JFrame implements ActionListener
     private String colNames[];
     private String rowData[][];
     private String col[];
     private String row[][];
     boolean stop = false;
     Timer timer;
     JScrollPane sp1=new JScrollPane();
     Container c=getContentPane();
     public tableTest(){
          super("table display");
          int delay=1000;
          timer = new Timer(delay, this);
        timer.setInitialDelay(0);
        timer.setCoalesce(true);
        timer.setDelay(1000);
          testing7(sp1);
          c.setBackground(Color.white);
             Container c=getContentPane();
             c.add(sp1,BorderLayout.WEST);
          System.out.println("haih~~");
          setBounds(50,50,600,600);
          setVisible(true);
     public static void main(String args[])
          tableTest test = new tableTest();
          test.start();
          test.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     public void actionPerformed(ActionEvent e)
               start();
               c.setForeground(Color.white);
               c.remove(sp1);
               System.out.println("Tested");
               sleep();
               stop();
               testing7(sp1);
               System.out.println("out!");
               timer.restart();
    public void testing7(JScrollPane sp1)
          testing5();
          JTable t1= new JTable(row, col);
          t1.setRowHeight(20);
          t1.setGridColor(Color.red);
          sp1.getViewport().setView(t1);
          sp1.setPreferredSize(new Dimension(150, 150));
//          c.add(sp1,BorderLayout.WEST);
//          c.remove(sp1);
     public void testing5()
          testing3();
          testing4();
     public void testing3()
          col = new String[5];
          for (int i=0;i<5;i++)
               col= " "+i;
     public void testing4()
          row = new String[10][10];
          for(int i=0;i<10;i++)
               for(int j=0;j<10;j++)
                    row[i][j]=i+","+j;
     public void sleep()
          try
               Thread thread;
               Thread.sleep(2000);
          catch (Exception e){}
     public void start()
          if(stop)
          else
               timer.start();
     public void stop()
          timer.stop();

seegeorge,
what do i mean by iconize it??

How to display All the rows in a Table

Hi All,
Our requirement is, we need to display all the records of an VO in a table. We should not have navigation bar with previous and next. Runtime only will come to know how many records the VO has. Is it possible to achieve our requirement using setNumberOfRowsDisplayed() method in OATableBean ?

Do u want to do it declaratively or programmatically.
Declaratively You can set no of rows property of table bean. If u want to set it programmatically then u can do it as discussed in the thread..
Regards,
Ram

How make display only the amount field in table control(infotype 0008)

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

Dear Freinds,
have to make display only the amount field (Q0008-bet01) on table control in infotype 0008 , could you tell me how to make it display only.
i have tried the below coding it is not working in PBO & PAI of the user exit
ZXPADU01 and ZXPADU02. For the table control is there any othe method??
       loop at screen.
           screen-name = 'WA_P0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
i have tried like this as well
       loop at screen.
           screen-name = 'Q0008-BET01'.
          screen-input = 0.
          screen-output = 1.
          modify screen.
      endloop.
in the both the above methods it is not working. Could any one plese suggest me how to make display only the amount field in infotype 0008.
regards
syamla

How to display % in the report results

Hi Experts
I my BW report i am calculacting % using Calculacted KF.
I want to display "%" in the report
Ex: 2.5 should be displayed as 2.5%
How can i achieve this

Hi,
In formula -- u have to select the Percentage Functions - then u select the [%A] Percentage share funtion.
It will display the calculated value with percentage like ,50%.
Regards
RP

How to display only the description of a combobox.

Hi All,
I have a combobox on a grid.
The value of it, is the adresses of BP.
Example :
                                    string sQuery = "SELECT CRD1.Address FROM CRD1 WHERE CRD1.AdresType='S' AND CRD1.CardCode='" + oGrid.DataTable.Columns.Item("U_IFC_PP").Cells.Item(pVal.Row).Value.ToString() + "'";
                                    SAPbobsCOM.Recordset oRec;
                                    oRec = (SAPbobsCOM.Recordset)SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset);
                                    oRec.DoQuery(sQuery);
                                    SAPbouiCOM.ComboBoxColumn oCBB;
                                    oCBB = (SAPbouiCOM.ComboBoxColumn)oGrid.Columns.Item("U_IFC_ADR");
                                    while (!oRec.EoF)
                                        oCBB.ValidValues.Add(oRec.Fields.Item("Address").Value.ToString(), "");//, oRec.Fields.Item("Address").Value.ToString());
                                        oRec.MoveNext();
When i click on the combobox, it's display the value and the description like this :
value1 - Adr1
value2 - Adr2
i want to display only the description like the field "Ship To" in the folder "Logistics" in the Sales Order form.
It is possible ?
And what is the size limit of the parameter oCombobox.ValidValues.Add(ByVal Value As String, _
   ByVal Description As String _)
Thanks for your response.
Best Regards.
Michael

Hi Michael,
actually you can't show only the description when you click into it.
the lenght of the description is usually around 50.
(but it depends also how long you made the value.)
the best is to do it so:
keep the value short with numbers
and cut the description at 42 (to be on the safe side)
lg David

How to display only the duplicate records

Hi friends,
I have a query that provides me with a set of data,which has some duplicate rows. I require to display only the duplicates.
This is the result I have:
card_no cust_no address paymnt_mode
1234 A123 XYZ CQ
1234 A234 nmb CC
9876 B123 mnnjn cc
5678 A123 XYZ CQ
5678 A123 XYZ CQ
7876 Mk89 mku CC
From the above ,
I require to display something like this:(Duplicates based on card number alone)
card_no cust_no address paymnt_mode
1234 A123 XYZ CQ
1234 A234 nmb CC
5678 A123 XYZ CQ
5678 A123 XYZ CQ
Please share some ideas,
Thanks a lot

with data as
select 1234 as card_no, 'A123' as cust_no, 'XYZ' as address, 'CQ' as paymnt_mode from dual union all
select 1234, 'A234', 'nmb', 'CC' from dual union all
select 9876, 'B123', 'mnnjn', 'cc' from dual union all
select 5678, 'A123', 'XYZ', 'CQ' from dual union all
select 5678, 'A123', 'XYZ', 'CQ' from dual union all
select 7876, 'Mk89', 'mku', 'CC' from dual
select card_no, cust_no, address, paymnt_mode
from
    select card_no, cust_no, address, paymnt_mode, count(*) over (partition by card_no) as cardinality
    from data
where cardinality > 1;
CARD_NO                CUST_NO ADDRESS PAYMNT_MODE
1234                   A123    XYZ     CQ
1234                   A234    nmb     CC
5678                   A123    XYZ     CQ
5678                   A123    XYZ     CQ          Change the column list in the partition by clause if you want to check over other columns as well.

SSRS - How to display all the results from a query and then be able to filter the data

Let's say I have a simple query that will return products name, ID, price
SELECT pname,
pID,
price
FROM products
When I display the results in SSRS the user will (without entering any parameters) see something like:
Product Name | ID | Price
xyz 1 $10.00
.zzz 10 $4,000.00
How can I filter my results once they are displayed? For instance, Out of the results the user wants to see only the products where price is between $10 and $3000?
-Alan

Hi Visahk,
Maybe I did not explain my issue very good.
I want the user to first see all results (without entering the price range) - then if he wants she/he can filter the results by price.
As soon as I add
WHERE price BETWEEN @StartPrice AND @EndPrice
to my SQL query, the user is prompted to enter a price range before seeing any data.
-Alan
Ok for that what you can do is to set allow null value property for the parameters.
Then set NULL as default value for parameters in parameter properties tab
and make the query as below
WHERE price BETWEEN @StartPrice AND @EndPrice
OR (@StartPrice IS NULL AND @EndPrice IS NULL)
and then report will get executed without waiting for any prompt and user may change values at a later stage and rerun it
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to display all the rows in a report

How will it be possible to show all the rows in a report, in a table view , other than modifying the table properties for each report individually ?
Is there some setting, so that for all tabular reports, all the rows will be displayed in one page?
I have added the following to the instanceconfig.
<Table>
<ResultRowLimit>1000000</ResultRowLimit>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>64000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>64000</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>2000</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
</Table>
Still I can view only 25 rows for the report.
Thank you.

Hi,
Open your report--> Select Table view--> Edit view properties-->Row per page --> Give here 9999999.
It will show all the rows in the report.
Hope this help's
Thanks,
Satya

How to display of the rule explanation screen within claim expert mode (ICLDCD02)

Hi all,
I just read Consulting Note - 1586478:BRFplus in FS-CM. According to the note, it is possible to display the rule explanation screen with claim expert mode. Would you like to provide how it can be done to me? It will be highly appreciated.

Just a remark: this is an excellent note - I'm wondering wether this is linked from SAP Application help.
Best Regards,
Tobias

How to display properly the SM59 RFC Trace

Similar Messages

Maybe you are looking for