How to display recordnumber for each row in cross tab?

Hi.. I am using Crystal Report XI,with the database Microsoft SQL Server. I have 2 questions regarding Cross Tab.1. How to limiting record per row and per column in Cross Tab? For example,at one page the report printing 20 records per row and 7 records per columns.2. I would like to display recordnumber for each row that printing in Cross tab. How crystal reports can handle this?Can anyone can help me out on this? Please kindly advise.AN

Dear Kathryn, I did used DisplayString as suggested by you. The result work fine until I add more data to this cross tab. I used this formula : global numbervar pager;recordnumber();pager := pager + 1; if pager > 0 then totext(pager - 1,0) The result come out in decending order for each row. SN Name 5 abc 4 def3 fig 2 klm 1 opq Is that anything wrong with my formula? Please kindly advise.-AN-

Similar Messages

How to display date for each packet in a Cisco ASA packet capture

Hello,
Quick question...On a Cisco ASA (v8.2) how does one show the date of each packet in a packet capture?
When performing a packet capture from CLI you can do a "show capture testcapture" command and you can see that the time is at the beginning of each packet but how does one view the date as well as the time for each packet? I know you can export the packet capture and it will show the date & time in wireshark but sometimes for just quick and dirty capture I'd like to view the capture from the CLI on the ASA itself without doing an export.
Sample capture below. Time is displayed but not the date of the packet capture. Issuing command "sh cap test detail" doesn't show the date either. I checked on an ASA running v9 and it also doesn't show the date in the packet capture.
ASA5505# sh cap test
   1: 08:51:56.112085 802.1Q vlan#12 P0 10.150.40.240.500 > x.x.x.x: udp 404
   2: 08:52:18.111871 802.1Q vlan#12 P0 10.150.40.240.29082 > x.x.x.x.53: udp 37
   3: 08:52:18.165366 802.1Q vlan#12 P0 y.y.y.y.53 > 10.150.40.240.29082: udp 53
   4: 08:52:32.129235 802.1Q vlan#12 P0 10.150.40.240.500 > x.x.x.x4.500: udp 404
   5: 08:52:37.111627 802.1Q vlan#12 P0 10.150.40.240.500 > x.x.x.x.500: udp 404
   6: 08:52:49.111490 802.1Q vlan#12 P0 10.150.40.240.500 > x.x.x.x.500: udp 404
Thanks for any help.
Joe

Hi,
I would suggest copying the capture from the ASA to some local host and opening the capture file with Wireshark to view the information
For example
copy /pcap capture:test tftp://x.x.x.x/test.pcap
This should copy the current data in the capture to the mentioned location with the mentioned filename.
I personally view the captures on the ASA CLI only if I am just confirming that some traffic comes to the firewall or when I am checking what happens to a TCP connection that can not be formed. Its a lot easier to go through bigger captures by copying them from the ASA and viewing them with an actual software meant for that purpose.
Hope this helps :)
- Jouni

Subtract sum of two columns in two different tables and display balance for each row

Hello Friends,
I have the below 5 tables
1. STUDENT (STUDENT_ID, NAME)
2. DEPARTMENT (DEPT_ID, NAME, CONTACT_PERSON, PHONE)
3. SECTION (SECTION_ID,SNAME,DEPT_ID,Acad_LEVEL,SHIFT,TIME,ROOM)
4. TUITION_BILL (Seq_No, STUDENT_ID, DEPT_ID, Acad_Level, SECTION_ID, SEMESTER, Acad_Year, BILL_DATE, GROSS_AMT_DUE)
5. TUITION_PAYMENT (Seq_No,RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)
I wrote the following query
SELECT T.Seq_No,T.STUDENT_ID,S.NAME As STUDENT_NAME,d.name As DEPT,T.Acad_Level,c.SNAME As SECTION,
T.SEMESTER,T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,
COALESCE(SUM(T.GROSS_AMT_DUE),0)-COALESCE(SUM(PAY.PAYMENT_AMT),0)- COALESCE(SUM(PAY.SCHOLARSHIP),0) As BALANCE
FROM TUITION_BILL T JOIN STUDENT S ON S.STUDENT_ID=T.STUDENT_ID join DEPARTMENT d on d.DEPT_ID=T.DEPT_ID
join SECTION c on c.SECTION_ID=T.SECTION_ID LEFT JOIN (SELECT DISTINCT STUDENT_ID,COALESCE(SUM(p.PAYMENT_AMT),0) As PAYMENT_AMT,
COALESCE(SUM(P.SCHOLARSHIP),0) As SCHOLARSHIP FROM TUITION_PAYMENT p GROUP BY p.STUDENT_ID) As PAY ON PAY.STUDENT_ID=T.STUDENT_ID
WHERE s.STUDENT_ID='138218' GROUP BY T.Seq_No,T.STUDENT_ID,S.NAME,d.NAME,T.[Acad_Level],c.SNAME,T.SEMESTER,
T.[Acad_Year],BILL_DATE,GROSS_AMT_DUE,PAYMENT_AMT,SCHOLARSHIP
The above query shows the below output
Seq_No
STUDENT_ID
STUDENT_NAME
DEPT
Acad_Level
SECTION
SEMESTER
Acad_Year
BILL_DATE
GROSS_AMT_DUE
BALANCE
1
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
One
2014-2015
1/10/2014
200
0
5638
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
Two
2014-2015
3/20/2015
200
0
There are two records in the TUITION_BILL table with different Semesters and bill dates for the specified student_id and there is only one record in the TUITION_PAYMENT table which is the semester one payment record. Semester two payment record
is not recorded yet and I want to display the balance like the following output instead of the above output.
Seq_No
STUDENT_ID
STUDENT_NAME
DEPT
Acad_Level
SECTION
SEMESTER
Acad_Year
BILL_DATE
GROSS_AMT_DUE
BALANCE
1
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
One
2014-2015
1/10/2014
200
0
5638
138218
Abdirahman Dhuh Gamadid
Agriculture and Veterinary
Year 2
2A
Two
2014-2015
3/20/2015
200
200
The above query is working fine but I'm facing only one problem with it which its showing 0 balance for both records instead of different balances like the above desired output.
Please help me in getting the desired result.
Any help would be appreciated.
Thanks in advance,
Mohamoud

Thanks a lot Pituach for your reply; below I posted the script for the database and table creation and inserting sample data into the tables.
CREATE
DATABASE TESTdb
GO
USE TESTdb
CREATE
TABLE [dbo].[STUDENT](
      [STUDENT_ID] [int]
NOT NULL,
      [NAME] [varchar](40)
NULL,
PRIMARY
KEY CLUSTERED
      [STUDENT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[DEPARTMENT](
      [DEPT_ID] [int]
IDENTITY(1,1)
NOT NULL,
      [NAME] [varchar](30)
NULL,
      [CONTACT_PERSON] [varchar](40)
NULL,
      [PHONE] [int]
NULL,
CONSTRAINT [PK__DEPARTME__512A59AC03317E3D]
PRIMARY KEY
CLUSTERED
      [DEPT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[SECTION](
      [SECTION_ID] [int]
IDENTITY(1,1)
NOT NULL,
      [SNAME] [varchar](40)
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](30)
NULL,
      [SHIFT] [varchar](20)
NULL,
      [TIME] [varchar](20)
NULL,
      [ROOM] [varchar](20)
NULL,
CONSTRAINT [PK__SECTION__92F8069507020F21]
PRIMARY KEY
CLUSTERED
      [SECTION_ID]
ASC,
      [DEPT_ID]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[TUITION_BILL](
      [Seq_No] [int]
IDENTITY(1,1)
NOT NULL,
      [STUDENT_ID] [int]
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](50)
NOT NULL,
      [SECTION_ID] [int]
NOT NULL,
      [SEMESTER] [varchar](50)
NOT NULL,
      [Acad_Year] [varchar](50)
NOT NULL,
      [BILL_DATE] [date]
NULL,
      [GROSS_AMT_DUE] [decimal](18, 2)
NULL,
CONSTRAINT [PK_TUITION_BILL]
PRIMARY KEY
CLUSTERED
      [STUDENT_ID]
ASC,
      [DEPT_ID]
ASC,
      [Acad_Level]
ASC,
      [SEMESTER]
ASC,
      [Acad_Year]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
CREATE
TABLE [dbo].[TUITION_PAYMENT](
      [Seq_No] [int]
IDENTITY(1,1)
NOT NULL,
      [RECEIPT_NO] [int]
NOT NULL,
      [STUDENT_ID] [int]
NOT NULL,
      [DEPT_ID] [int]
NOT NULL,
      [Acad_Level] [varchar](50)
NOT NULL,
      [SECTION_ID] [int]
NOT NULL,
      [SEMESTER] [varchar](50)
NOT NULL,
      [Acad_Year] [varchar](50)
NOT NULL,
      [SCHOLARSHIP] [decimal](18, 2)
NULL,
      [PAYMENT_DATE] [date]
NULL,
      [PAYMENT_AMT] [decimal](18, 2)
NULL,
      [REFERENCE] [varchar](50)
NULL,
      [REMARKS] [varchar](max)
NULL,
CONSTRAINT [PK_TUITION_PAYMENT]
PRIMARY KEY
CLUSTERED
      [Seq_No]
ASC
)WITH
(PAD_INDEX
= OFF,
STATISTICS_NORECOMPUTE
= OFF,
IGNORE_DUP_KEY =
OFF, ALLOW_ROW_LOCKS
= ON,
ALLOW_PAGE_LOCKS =
ON)
ON [PRIMARY]
ON [PRIMARY]
GO
SET
ANSI_PADDING OFF
GO
USE TESTdb
INSERT
INTO STUDENT(STUDENT_ID,NAME)VALUES(138218,'Abdirahman
Dhuh Gamadid')
INSERT
INTO DEPARTMENT(NAME,CONTACT_PERSON,PHONE)VALUES('Agriculture
and Veterinary','Mohamoud Abdilahi','065')
INSERT
INTO SECTION(SNAME,DEPT_ID,Acad_Level,SHIFT,[TIME],ROOM)VALUES('2A',1,'Year
2','Morning','8:00-10:00','Room 1')
INSERT
INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
VALUES(138218,1,'Year
2',1,'One','2014-2015','2014-09-10',200.00)
INSERT
INTO TUITION_BILL(STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,BILL_DATE,GROSS_AMT_DUE)
VALUES(138218,1,'Year
2',1,'Two','2014-2015','2015-01-10',200.00)
INSERT
INTO TUITION_PAYMENT(RECEIPT_NO,STUDENT_ID,DEPT_ID,Acad_Level,SECTION_ID,SEMESTER,Acad_Year,SCHOLARSHIP,
PAYMENT_DATE,PAYMENT_AMT,REFERENCE,REMARKS)VALUES(1,138218,1,'Year
2',1,'One','2014-2015',0.00,'2014-10-10',200.00,'N','N')

How to add a comment for each row on the output of a report?

I would like to add a comment (field) for each row on the output of report? This comment should to be saved as well. Is there a way i can do that?
Regards,
Ram

Hi Dimitri,
through the instead of trigger functionality i am able to update the view. This is view is based on different views which should be linked to a table (as you suggested) in which comments can be stored. Hower this table is empty and how to link this table with the view now? I face the following challenge.
View consists the following columns, for example
select name, sex, age from test_view
name sex age
John M 20
Anton M 30
Willy M 40
shirley F 38
sharon F 37
The report has the following output, for example
name sex age
John M 20
Anton M 30
Willy M 40
Shirley F 38
Sharon F 37
Now i would like to add comment through a button.
The report layout looks like
name sex age
John M 20 <add comment button>
After submitting the <add comment button> you can enter text which deals with John
text='John doesnot like me'
Finally the report display the comment as well
name sex age
John M 20 'John doesnot like me' <update/delete comment button>
Anton M 30 <add comment button>
Willy M 40 <add comment button>
Shirley F 38 <add comment button>
Sharon F 37 <add comment button>
After submitting the <update/delete button> you can change or delete the entered text.
I hope this example clears things up.
Regards,
Ram

Problem in displaying dynamic values in dropdown list for each row

I want to display dynamic values in a drop down list for each row, and these values depends on the column value in each row(ptaid), based on each ptaid i need to fetch values for drop down list. so how can i achieve this..
Thanks
Babu

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

How to process a block for each row in an internal table....

Hi experts....
In po approval workflow the scenario is like this.... for each po there may be more than one approver. approvers list i am maintaining in the ztable. list of approvers(no of approvers) is decided by the po value. I have collected these approvers into internal table. now i have to process a block ( approving or rejecting the po... )in the workflow for each row in the internal table.
how can i do this. based on the decision of the 1st approver approves the po then it should go to next approver in the internal table...otherwise end the workflow.....
Please help me......

i have created an internal table in the workflow container in which i am getting the list of approvers....
how can i loop the internal table in the workflow...?
how can i know the index of the loop in the workflow.....(will sy-index work here....? so that i can use loop until step in the main workflow to call the subworkflow..so that if sy-index is greater than no of entires in the itab then i can come out of the loop)

How do I save rows results and add them up for each row.

I have the following select statement that saves the results in result1, result 2 and result3 variables.. How do I include a total (result1 + result2 + result3) for each row?
select TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status, 'Estimator Notified'
,cc.end_date,NULL) - DECODE (cc.request_wflow_status,
'Estimator Notified',cc.start_date,NULL)))),1) result1
,TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status, 'Estimator Accepted'
,cc.end_date,NULL) -
DECODE (cc.request_wflow_status,'Estimator Accepted',cc.start_date,NULL)))),1) result2
,TRUNC(AVG( SUM ( (DECODE (cc.request_wflow_status,
'Install Complete',cc.end_date,NULL) -
DECODE (cc.request_wflow_status,'Install Complete',cc.start_date,NULL)))),1) result3
FROM cc_request_status cc
GROUP BY cc.request_id
Thanks,

select result1,result2,result3,nvl(result1,0) + nvl(result2,0) + nvl(result3,0) Total from ( ...your query...);

For each row of a table call a pl/sql function

Hi,
i have a search form in adf like this:
parameter1:___
parameter2:____
buttonSearch
Table with results
field1 field2 field3
row1 ------ --------- -------
row2 ------ --------- -------
row3 ------ --------- -------
The user inputs the parameters 1 and 2 then press buttonSearch and the query execute and returns rows 1 to 3.
What i need is for each row call pl/sql function and passed the parameter 1 and 2 and field 1 to 3 (plsql function recives 5 parameters (parameter1, parameter2, field1 , field2 and field3) )
my buttonSearch call a java class that execute ExecuteWithParamters method.
I create the call to my plsql function on Application module class and then export as a java interface.
So i have the function to use in the viewcontroller layer, but i don't know where to use it, and how to pass the paramters: the parameter 1 and 2 that user inputs and the row fields.....
any ideas....
thanks!!

Hi,
for this you need to call the PLSQL function upon table rendering, which means that you need a field in the table referencing a managed bean. In the managed bean you can use #{row} and resolve it using a ValueExpression. #{row} gives you access to the current rendered row (this is why you need to do it when the table renders) and thus allows you to call getAttribute(name) to get the values of field 1 - 3. The search field value you should get through the bindings reference (assuming the search form uses ADF). Then you create an operation binding for the executeWithParameters and call operationBindingName.getParamsMap().put(argname, argvalue); on it.
Frank
Ps.: I am concerned about the performance you get and wonder if it isn't possible to create a transient attribute that executes the function and displays the results. As I understand, the search parameters are only to filter the result set, which you still can do

Drop Down List in a table - different options for each row

How can i have a drop down list in a table with different options for each row?
My requirement is this.. I want to display, say employee dtails in a table, and one column is employee hobbies, whcih can have multiple values and each employee may have a different list of hobbies. So how can we populate the drop down for each row, with different options?

Hey. Uh, this probably isn't the answer you were looking for, but it sounds like you've got a problem with your database design there. Generally speaking, your tables shouldn't have multi-valued fields, in the relational model anyway (sql). Instead, you should look at adding a separate table like EMPLOYEE_HOBBIES. Then you have a foreign key using the employees primary key as the foreign key in the employee_hobbies table, see what I mean? I might have misunderstood your explanation though, I'm not sure.
Alternatively, you could just have hobbies as a big freeform varchar field, and don't bother to make people separate their hobbies into different fields (you'd have to abandon the drop-down listbox idea in this case). If there's no really important reason to make the distinction, then it's probably easier just to not do it.

Adding a check box control for each row of data in a DataModel

Hi all,
I need to add a checkbox control for each row of data on a DataModel object.
I have a "commandButton" at the bottom of DataModel, and whenever someone checks some of the rows on that list of rows,
I need to get the selected dataModel(fragment of the list) in my backing bean.
How do I achieve this functionality in JSF?
Thanks,
Meghasyam.

Hi all,
I need to add a checkbox control for each row of data
on a DataModel object.
I have a "commandButton" at the bottom of DataModel,
and whenever someone checks some of the rows on that
list of rows,
I need to get the selected dataModel(fragment of the
list) in my backing bean.
How do I achieve this functionality in JSF?
Thanks,
Meghasyam.You'll want to have a wrapper class as suggested above, which has a "selected" boolean in it. Then use the "binding" attribute of the h:selectBooleanCheckbox component to bind the checkbox to that property... Make the property public and specify the properties exact name in the binding... bindings do not append "get" to the EL.
Here is an example of what your table might look like... This code would display the list of names with a checkbox to the left of each name... When the check box is selected, the "selected" property of that wrapper class is set to true or false as needed. Then when the form is submitted, and you are inside your actionListener or action method call, you can look through your collection of wrapper classes asking each one if it was selected or not... Then do whatever you want with them... In this example, replace "myBackingBean" with the name of your backing bean, and "names" with the name of the method in your backing bean which returns the collection of wrapper classes... create a flag "public boolean selected" or similar in your wrapper class..
<h:dataTable id="namestable"
value="#{myBackingBean.names}"
var="aName">
<h:column>
<h:selectBooleanCheckbox binding="#{aName.selected}"/>
<h:outputText value="#{aName.nameText}"/>
</h:column>
</h:dataTable>
Let me know if that isn't clear enough and I'll see if I can find a better way to explain it...
-Garrett

Update button in sql report for each row can only get the report value

I have to added Update for each row of records like:
select a.*,'Update' button from (
select c.*,d.login from country c,champ d
where c.champ_id=d.champ_id(+)
order by c.name) a
then go to the report->edit button ->Column Link
I added some items P40_REGION, P40_CHAMPID,P40_ACTIVE,P40_CODE and assign the value like #region#,#active# ,#code# to these item, but when I click the update button in the report I found the values such as #region#,#active# ,#code# is the report value not the select list selected value(the region, active column are displayed as select list lov).
Can anyone tell me how to sort this knid of problem?
Thanks a lot!

Sorry, it doesn't work. I also tried apex_application.g_f01(i), but not everytime I can get the value or get the incorrect value. If you have time you can try to create it like what I have described. Our team use two days now but still can not sort this problem.

Get the Count for each row

I'm trying to get the count for each row to total count for each month
Something like this
Hardware | Jan
Monitors | 5
Processors | 137
Printers | 57
etc........
How can I write a query for this. I can get the Hardware column but don't know how to get the next column.

If you can provide more data like sample input DML statements it would have been wonderful..
Assuming is , you need a pivot. Here is an article on basic Pivot..
http://sqlsaga.com/sql-server/how-to-use-pivot-to-transform-rows-into-columns-in-sql-server/
something like this may be..
DECLARE @Input TABLE
Hardware VARCHAR(20),
[Date] VARCHAR(20)
INSERT INTO @Input VALUES('Monitor', '01/01/2014'), ('CPU', '01/01/2014'), ('Monitor', '01/03/2014')
, ('ABC', '01/01/2014'),('Monitor', '02/01/2014')
;WITH CTE AS
SELECT Hardware, LEFT(DATENAME(M, [Date]),3) AS [MonthName] FROM @Input
SELECT *
FROM
SELECT Hardware, [MonthName], COUNT(Hardware) AS Count FROM CTE GROUP BY Hardware, [MonthName]) a
PIVOT (MAX([Count]) FOR [MonthName] IN ([Jan], [Feb])) pvt
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

How to display value in two rows?

Hi,
There are two column value in db which will be displayed in on table cell.
How to display them in different row in the same cell?
thanks!
Beavey

Hi Saichand.V,
Thank you for your replay!
I try it, but the layout is not right.
I using the following method:
Using "Edit Formula" in table, then "Column Formula" is set as "CONCAT(CONCAT('Facility: ',PRO_M_FACILITY.ABBR_NAME), CONCAT('<>Department: ',PRO_M_DEPARTMENT.DEPARTMENT_NAME) )". I want to use "<>" to display "Department: XXXXXXX" in the second row, but it also does not work.
Regards,
Beavey
Edited by: Beavey on Dec 6, 2009 4:37 PM

Different values in a list box for each row of the table control...

Dear Experts,
Is it possible to populate different values for each row in a listbox inside a table control ?
Example,
Row 1 in the the table contains A, B & C
Row 2 in the same table contains C, D & E
If yes, How?
yes i am using
call function 'VRM_SET_VALUES'
    exporting
      id     = i_name
      values = i_list.
Thank you .
Message was edited by:
        Kokwei Wong
Message was edited by:
        Kokwei Wong

Hi Wong,
this is code example for listbox
TYPE-POOLS vrm .
DATA: lt_vrm_values TYPE TABLE OF vrm_value.
DATA: wa_vrm_values TYPE vrm_value.
PARAMETER p_list AS LISTBOX VISIBLE LENGTH 10.
INITIALIZATION.
wa_vrm_values-key = 'Key1'.
wa_vrm_values-text = 'Value1'.
APPEND wa_vrm_values TO lt_vrm_values.
wa_vrm_values-key = 'Key2'.
wa_vrm_values-text = 'Value2'.
APPEND wa_vrm_values TO lt_vrm_values.
wa_vrm_values-key = 'Key3'.
wa_vrm_values-text = 'Value3'.
APPEND wa_vrm_values TO lt_vrm_values.
AT SELECTION-SCREEN OUTPUT.
CALL FUNCTION 'VRM_SET_VALUES'
       EXPORTING
            id              = 'P_LIST'
            values          = lt_vrm_values
       EXCEPTIONS
            id_illegal_name = 1
            OTHERS          = 2.
IF sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
To fill it with data from DB, just do select in INITIALIZATION and put that values with same alghoritmus.
Manas M.
P.S.: This is very easy question, you should use search ...

How to get control on each row in advance table

hi, i have a advanced table with some data, in each row i have two radio buttons which i need to set depending on some column value in the row, i tried by following code
for(SoftCompVORowImpl row2 = (SoftCompVORowImpl)svo.first();row2!=null;row2=(SoftCompVORowImpl)svo.next())
if(row2.getAttribute("CommitEndDate")==null || row2.getAttribute("CommitEndDate").equals(""))
onetime.setSelected(true);
recurring.setSelected(false);
else
onetime.setSelected(false);
recurring.setSelected(true);
but this code is making set only one radio button (onetime), which ever i am making first true its getting selected, i need to know how to get control of each row....

Babu,
Basically you should use the decode function in your sql query itself and attach it with BC4J properties of radio buttons.In that case you don't have to worry about setting them declaratively !
--Mukul

How to display recordnumber for each row in cross tab?

Similar Messages

Maybe you are looking for