How to display rounding value in sales order
hi
i maintained each and everthing functionality in pricing procedure but it is not showing value of condition type DIFF while creating sales order so can explain this
Hello Kamesh,
i maintained each and everthing functionality in pricing procedure
but it is not showing value of condition type DIFF while creating
sales order so can explain this
For the Rounding Condition Type "DIFF", the main controlling paramters are Requirement :-13(Rounding as perT001R), Alt Calculation Type :-16(Rounding the total) and Alt Base :-4(Net value + tax). Hope the table T001R(Rounding Rules for Company Code and Currency) has rounding entries for the combination of Company code and Currency.
Kindly carry an analysis based on these above points and post an update here.
Regards,
Sarthak
Similar Messages
-
How to Overrride ATP values during sales order creation
Hi all,
How i override ATP values during sales order creation.
The scenario is that we need to migrate open orders from an existing legacy system to SAP.
While migrating these orders, we need to make sure that dates on the schdule lines are same as they are in the old system. Hence we need to override ATP.
Any suggestion welcome..
Regards,Hi Kantur Shekar madhuri,
Would you confirm the whether in your schedule line category is activated for "Product Allocation" or not.
if not please activate and re run your scenario.
Regards
Arun -
How to display delivery status on sales order line
Hi,
We're on R12.1.3
We have a requirement to display delivery status on sales order lines in quick sales order form. Is there a standard configuration available to achieve this? if not available, what would be the best way of achieving this?
I mean using, Forms personalization or Event based Alert etc?
Thanks,
RamThis is already available in the additional line information..though..
If you still want that at line level to be displayed..maybe you need to customize the form...not sure how u can handle that logic
Mahendra -
How to get PERSON_RESP value? (Sales Order)
Hello experts,
I am extremely new to ABAP programming. I am learning BOL programming, creating BAdI's and all that stuff and to be honest I don't really get it.
First of all I would appreciate directions where I may find valuable information. How to determine which table do I need, what method is designed to do what thing.
Right now I am struggling with creating a BAdI (actually modifying the order_save one). I want to put into DESCRIPTION field the following values: CREATED_AT, CREATED_BY, current date (date-sylo) and PERSON_RESP. I wrote or actually copied from the Internet most of working code. Now my BAdI works almost what I wanted it to work except it doesn't put into description PERSON_RESP value, because I don't know where to find it. There is no PERSON_RESP value inside crmt_orderadm_h_wrk table.
I will be very grateful for any clues and advices.
Looking forward hearing from you.
Thank you in advancehi
Once deleted it is not possible to know the details of sales order.
for deleted sales orders and who deleted check table <b>"cdhdr" and "cdpos".</b>
goto se16 and try with the above tables
chages header and item respectively
regards -
How to pass condition values fom sales order to packing list
Hi!
I need to show price amounts on the packing list printout from VL03N based on the condition value from the sales order document. Can anyone suggest how this can be achieved?
Thanks!
CholenI think I have found a solution:
- select vbak-knumv from sales order of delivery then select the condition values from table konv where vbak-knumv = konv-knumv.
One can filter by kschl (condition type) if only particular amounts based on condition type need to show up. -
How to get xveda values in sales Order userexit MV45AFZZ
Hi guys,
Tables XVEDA and YVEDA has no entries in sales order userexit. Do you know how to get contract end dates of line items in sales order user exitUsed function module SD_VEDA_SELECT to solve the issue
-
Rounding Profile on Sales Orders
Hi Guys, I am trying to set up a rounding profile on sales order. I did a config and is working fine for PO but not for sales order. I have rounding permit option selected in item category in sales order too, I have rounding profile defined in sales and MRP 1 view in material master but its just not rounding up to the value i defined when i save the sales order, Does any body know why?? Can you help please! Thanks
create your static rounding profile and plant in OWD1
like:
Threshold value Round Value
1 5
6 10
11 20
21 30
31 40
assign the profile in the Sales Org data 1 in material master
enable rounding permitted in VOV7
Regards
Sidi -
How to transfer cost from old sales order (cancelled) to new sales order
Hi Gurus
I want to know, how to move cost from one sales order to another sales order.
SD created sales order before 1 month and there was production order behind this. Production was completed and all the cost was moved to sales order and also SD has raised invoice on customer. This transaction was completed.
The above order was rejected by customer due to some changes in the order. SD raised another sales order and production order was created to to additional work. Production transfered above stock (produce before on old production order) to new production order.
My problem is stock is now transfered to new production order but cost is still sitting on old sales order. How do I transfer cost from old sales order to new sales order. SD cancelled old invoice and raised new one with full value (old + new work) on new sales order. Now cost is on old sales order and revenue is on new sales order.
Please help.
ThanksHi
I have reverse the sales order settlement, PP order settlement to sales order and I have also done KB11N for transfering the cost to the new production order.
The only problem is I was unable to transfer labour hour confirmation as cost element used for this are not for transfering cost. If I will reverse the confirmation in PP order system will reverse material movement also which I don't want any more. Can you please tell me how to I reverse the Labour hours with out affecting goods movement?
Many thanks -
Pricing amount and condition value in sales order
Hi all,
I have noticed for a sales order we are not able to see condition type amount, condition value in sales order even though it shows net price finaly ofr a sales order. Not even able to select the condition lines.
To be specific not able to find value in field KBETR - amount column and KWERT - condition value column
When we go to sales order line item and select condition tab, do see value displayed in Amount and Condition column. Is there are specific reason it is doing visa vis in our production we see both values.
Advise what could be the reason value not getting displayed in Amount and Condition value column.
thanksIt is due to auth for specific columns we have solved the problem.
-
Hi All,
Any one know how the system set net value in sales order item? (VBAP-NETWR)
I mean, what kind of condition type will be considered in net value calculation.
Thank youHi,
In Sales Order net value (NETWR) is always value before tax, it means the condition type determined before tax condition will be considered in sales order Net Value.
In other words if conditon type have a category defined as D-Tax and Cond. class as D- Taxes, the value of this condition type will not be considered in Net value.
regards
Vivek.
Edited by: Vievk Vardhan on Jan 7, 2010 2:00 PM -
Hi,
How system pick the credit value in sales order.What are the different setting required for this?
Regards
PrabudhHi prabudh,
Creidt value is picked up from the sales order through the Pricing procedure.... While defining the pricing procedure we maintain the sub total "A" against the Total value. This value will get updated as the creidt value......
Regards
Harsh -
How can I use the field "Sales Order" on derivation?
Dear All.
This is about PA characteristic derivation.
I want to change the characteristic value "Sales Order (KAUFN)" by derivation.
But I cannot select the characteristic field on target field.
The field "Sales order(KAUFN)" doesn't exist there.
Why? How can I use the field "Sales Order" on derivation?
Y.C.BaeHi Bae,
in order to be able to choose fields KAUFN (for sales order) and KDPOS
(for sales order item) as target fields of derivation step 'enhancement'
you have to modify the coding of subroutine EXIT GET_ALLOWED_TARGETS
in program RKEDRCOPA like this:
NAME-IDENTIFIER = 'CO-PA'.
NAME-TABNAME = FIELDTAB_ENTRY-TABNAME.
NAME-FIELDNAME = FIELDTAB_ENTRY-FIELDNAME.
IF FIELDTAB_ENTRY-USGFL CA 'DUV'
BEGIN OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KAUFN'
OR FIELDTAB_ENTRY-FIELDNAME = 'KDPOS'
END OF INSERTION *****
OR FIELDTAB_ENTRY-FIELDNAME = 'KNDNR'
OR FIELDTAB_ENTRY-FIELDNAME = 'ARTNR'
Actually sales order number and sales order item shouldn't be changed
by derivation (therefore they are no valid target fields in standard)
but if you need to fill them within an enhancement this modification
will help you to define them as valid target fields. But this is just
the technical frame so far; the logic from which table you'd like to
derive the sales order number correctly depends on your implementation
of the enhancement! I just want to ask you to be rather careful with
the implementation of the exit so that the sales order number isn't
changed in cases that shouldn't be concerned.
Regards,
Abhisek -
How to display discount price amt in order confirmation page
hi,
I created a discount for site,who places any order will get a discount for that particular order ,How to display discount price amt in order confirmation page.suggest some points guys.Try displaying it as following , just put the jsp code for the if() statement i have put below.
This block loops through order level adjustments and displays the discounts for the one's associated with order promotions.
<dsp:droplet name="ForEach">
<dsp:param name="array" bean="ShoppingCart.current.priceInfo.adjustments" />
<dsp:param name="elementName" value="pricingAdjustment" />
<dsp:oparam name="output">
//displaying if discount was provided, associated with some order level promotion
if (pricingAdjustment.getPricingModel() != null && pricingAdjustment.getAdjustment() < 0) {
<dsp:valueof param="pricingAdjustment.totalAdjustment" />
</dsp:oparam>
</dsp:droplet> -
How to update pricing in open sale order
Hi all
in open sale order suppose my basic price has been changed .how Can i update all open sales order basic price in one shot.Dear Sachin,
Please follow the point as given below;
1. In VTFL for your item category maintain pricing type as B if it is delivery related billing and if it is order related billing VTFA maintain pricing type as B and one more thing maintained Billing Quantity as C if you using VTFA and Billing Quantity as D if you using VTFL.
2. Create the new condition records in VK11 for your new price ( Do not change the existing condition record in VK12) with proper validity dates
3. Use update button in billing the system will pick the new record by accessing VK11 in billing.
Try this, it will work.
Regards,
Bharat B -
How to change pricing Conditions in Sales order in change sales order bapi
Hi Experts,
How to change pricing Conditions in Sales order in change sales order bapi.
I have used the 2 function modules bapi-changesalesorder and sd salesdocument change, But it is creating the new record , instead of changing the existing one, Could please assist regarding the same
Thanks in Advance .
NLNHI NLN
I have just tried on my system and managed to overwrite the existing price by passing the following parameters.
<b>Import Paramters:</b>
SALESDOCUMENT - Sales Document Number
ORDER_HEADER_INX - UPDATEFLAG as <b>'U'</b>.
LOGIC_SWITCH - Import Structure - Pass 'X' to LOGIC_SWITCH-COND_HANDL.
<b>Tables:</b>
CONDITIONS_IN - ITM_NUMBER,
COND_COUNT, -> Condition counter same as KONV-ZAEHK generally it is <b>'01'</b>
COND_TYPE,
COND_VALUE,
CURRENCY.
CONDITIONS_INX - ITM_NUMBER,
COND_COUNT,
COND_TYPE,
UPDATEFLAG as <b>'U'</b>,
CURRENCY.
Hope i have clarified your query.
Kind Regards
Eswar
Maybe you are looking for
-
I can't install Desinger on my machine ,please help me
I want to install Designer, but I can't succeed either when install Oracle Designer 6i Release 4.5 or when install Oracle Designer 9i. I have installed Oracle9i Release 2 (9.2.0.1.0) standard edition for Windows NT on my machine. When I install Oracl
-
Adobe Acrobat Standard 9 won't pick up links in Word doc ...
That's it really, in a nutshell. My new Adobe Acrobat Standard 9 doesn't pick up the bookmarked and url links in my Word doc. As it's new, I'm wondering if it's just a settings problem? I'd be grateful for any help. I've been referred all over the pl
-
Lot not show in MMBE quality insspection
Dear expert i make planing for halb material against 04 origin and also active inspection 04 or lot will be generated against 101 movement type. Now lot will be show on QA32 but not shown in MMBE in Quality inspection its quantity show only unrestri
-
Update on Oracle-Realserver streaming
Hello Larry, Thank you very much for hints. Sorry for re-posting my recent reply, but it seems that it was hard to find it when it's so much down the thread. I guess I figured out how to use the ldd command. Here's what it gives: libclntsh.so.9.0 =>
-
FCP keeps giving up " warning dropped frames"
I'm working on a project 1024 x 576 and FCP just keeps giving up, I get the dropped frames box up. I've got a Dual 2.5 with 6.5 gig of ram, whats going on. I've also just defragmented the disks, I've turned off "unlimited RT" Any sugestions thanks An