How to display smartform table content in condition basis

Hi experts
     In smartform, can i display the content of table in a condition basis.
     For example am displaying 4 rows in a page.
     If the rows exists more than 4, remaining rows i want to display in next page.
     Is it possible, if so, how to do, pls anyone help me on this.
Thanks in advance.
Regards
Rajaram

hi,
use the command which is present in the flowlogic.
In that tick the Go to new page check box and write the page no. into the i/o bos besides it and write the condition whatever it is.
thanks
Dharmishta

Similar Messages

How to display smartforms table lines useing different background colour

Hi all:
How to display smartforms table lines useing different background colour .
for example:
line1:green
line2:red
line3:green
line4:red
line5:green
line6:red
line7:green
line8:red
Any help is highly appreciated!!
启明星

Hi,
Create a two lines one for header and second for data in the table.
1)In table painter we can find the pencil mark.
2)select the pencil mark
3)now select the line which you need to shade
4) now select the shading colour in the table painter and the provide the resolution up to 100% and select table pattrn for that line.
5) Now you can use this for the header now only the header gets shaded and the remaining gets unshaded.
reward points if useful
Thanks and Regards,
Nishant

How to display internal table content to table control

hi experts
 I am very new to dialog programming
 I have the Internal table in a report program containing data that needs to be displayed in table control.
 Can you explain in step by step.
 Thanks in advance.
Regards
Rajaram

Hi Raja
Dialog-driven programs, or any program started using a transaction code, are known as SAP transactions, or just transactions. The term "transaction" is used in several different contexts in the IT world. In OLTP (Online Transaction Processing), where several users are working in one system in dialog mode, the term "transaction" stands for a user request. In conjunction with database updates, it means a change in state in the database.
Programs with type M can only be started using a transaction code, in which an initial screen is defined. Programs with type 1 can be started either using a transaction code, or by entering the program name in one of the transactions SE38 or SA38. Screens call dialog modules in the associated ABAP program from their flow logic. Type M programs serve principally as containers for dialog modules, and are therefore known as module pools. Type 1 programs, or function modules can also switch to dialog mode by calling screens using the CALL SCREEN statement. The program code of the corresponding executable program or function pool must then contain the corresponding dialog modules.
Programs that are partially or wholly dialog-driven cannot be executed in the background. They are therefore sometimes referred to as dialog programs.
Transaction code
The transaction code starts a screen sequence. You create transaction codes in the Repository Browser in the ABAP Workbench or using Transaction SE93. A transaction code is linked to an ABAP program and an initial screen. As well as using a transaction code, you can start a screen sequence from any ABAP program using the CALL SCREEN statement.
Screens
Each dialog in an SAP system is controlled by one or more screens. These screens consist of a screen mask and its flow logic. Since the flow logic influences the program flow, screens are sometimes referred to as "dynamic programs". You create screens using the Screen Painter in the ABAP Workbench. Each screen belongs to an ABAP program.
The screen has a layout that determines the positions of input/output fields and other graphical elements such as checkboxes and radio buttons. The flow logic consists of two parts:
Process Before Output (PBO). This defines the processing that takes place before the screen is displayed.
Process After Input (PAI). This defines the processing that takes place after the user has chosen a function on the screen.
All of the screens that you call within an ABAP program must belong to that program. The screens belonging to a program are numbered. For each screen, the system stores the number of the screen which is normally displayed next. This screen sequence can be either linear or cyclic. From within a screen chain, you can even call another screen chain and, after processing it, return to the original chain. You can also override the statically-defined next screen from within the dialog modules of the ABAP program.
GUI status
Each screen has a GUI status. This controls the menu bars, standard toolbar, and application toolbar, with which the user can choose functions in the application. Like screens, GUI statuses are independent components of an ABAP program. You create them in the ABAP Workbench using the Menu Painter.
ABAP Program
Each screen and GUI status in the R/3 System belongs to one ABAP program. The ABAP program contains the dialog modules that are called by the screen flow logic, and also process the user input from the GUI status. ABAP programs that use screens are also known as dialog programs. In a module pool (type M program); the first processing block to be called is always a dialog module. However, you can also use screens in other ABAP programs, such as executable programs or function modules. The first processing block is then called differently; for example, by the runtime environment or a procedure call. The screen sequence is then started using the CALL SCREEN statement.
Dialog modules are split into PBO modules and PAI modules. Dialog modules called in the PBO event are used to prepare the screen, for example by setting context-specific field contents or by suppressing fields from the display that are not needed. Dialog modules called in the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
Passing Data Between ABAP Programs and Screens
How are fields from ABAP programs displayed on the screen? And how is user input on the screen passed back to the ABAP program? Unlike in list programming, you cannot write field data to the screen using the WRITE statement. Instead, the system transfers the data by comparing the names of screen fields with the names of the ABAP fields in the program. If it finds a pair of matching names, the data is transferred between the screen and the ABAP program. This happens immediately before and immediately after displaying the screen.

Field Attributes
For all screen fields of a dialog screen, field attributes are defined in the Screen Painter. If a field name in the screen corresponds to the name of an ABAP Dictionary field, the system automatically establishes a reference between these two fields. Thus, a large number of field attributes for the screen are automatically copied from the ABAP Dictionary. The field attributes together with data element and domain of the assigned Dictionary field form the basis for the standard functions the screen executes in a dialog (automatic format check for screen fields, automatic value range check, online help, and so on).
Error Dialogs
Another task of the screen processor is to conduct error dialogs. Checking the input data is carried out either automatically using check tables of the ABAP Dictionary or by the ABAP program itself. The screen processor includes the error message into the received screen and returns the screen to the user. The message may be context-sensitive, that is, the system replaces placeholders in the message text with current field contents. In addition, only fields whose contents is related to the error and for which a correction may solve the error can accept input. See also Messages on Screens.

Data Consistency
To keep data consistent within complex applications, ABAP offers techniques for optimizing database updates that operate independent of the underlying database and correspond to the special requests of dialog programming. See also Programming Database Updates.
TRANSACTION CODES
MENU PAINTER : SE 41.
SCREEN PAINTER : SE 51 .
BOTH : SE 80 .
 ONLY EXISTING PROGRAMS CAN BE VIEWED IN SE 41 , SO USE SE 38 .
CONCEPT :
STEPS :
1. GIVE TRANSACTION CODE SE 38 , CREATE A REPORT NAMED
" ZVRPRDIALOGTEST2 " . SAVE , CHECK , ACTIVATE IT .
2. THEN GIVE CODE SE 51. GIVE SAME PROGRAM NAME AS SE38 .
GIVE SCREEN NUMBER , PRESS CREATE .
3. GIVE SHORT DESCRIPTION . THEN CLICK ELEMENT LIST .
4. THE SCREEN COMES , TYPE " OKCODE " .
5. CLICK FLOW LOGIC , THE SCREEN COMES .
6. one screen will come.
7. SAVE . CHECK , ACTIVATE .
8. CLICK LAYOUT . SCREN PAINTER SCREEN COMES .
9. PRESS " F6 " . TYPE TABLE NAME , PRESS ENTER . THE SCREEN COMES .
10 . TO SELECT THE DESIRED FIELDS , CLICK THE " TO SELECT " AREA IN
EACH ROW , PRESS ENTER .
11 . AFTER CLICKING , PRESS ENTER .
12. THE FINAL SELECTION WIL COME
13 . GIVE THE NESSARY BUTTONS IN THE SCREEN PAINTER .
14 . DOUBLE CLICK IN EACH BUTTON GIVE LABLE , FUNCTION CODE .
15 . THE FINAL SCREEN WIL COME
16 . SAVE . CHECK .ACTIVATE. TO CHECK SCREEN PRESS F8.
17 . TO WRITE CODING : PRESS FLOW LOGIG .
18 . THE SCREEN COMES .
19 . DOUBLE CLICK FIRST EVENT ( MODULE STATUS _ 3000 ).
20 . PBO MODULE WINDOW COMES , PRESS TICK MARK .
21 . EDITOR COMES . SAVE .
TYPING PROGRAM IN THE EDITOR
Steps :
THE EDITOR WILL BE AS SHOWN ABOVE , NOW TYPE THE FOLLOWING CODE .
NOTE :
BEFORE TYPING CODE : TAKE COMMENTS FROM , THEN TYPE LIKE :
SET PF_STATUS ' PRSTATUS '
SET TITLEBAR 'PRTITLE' .
*& Module STATUS_3000 OUTPUT
* text
TABLES : ZVTIKFS.
DATA BEGIN OF INT_TAB OCCURS 0.
INCLUDE STRUCTURE ZVTIKFS.
DATA END OF INT_TAB.
DATA OKCODE LIKE SY-UCOMM.
DATA INDEX TYPE I VALUE 1.
* MODULE STATUS_3000 OUTPUT *
MODULE STATUS_3000 OUTPUT.
SET PF-STATUS 'PRSTATUS'. "COMMENTS TOOK
SET TITLEBAR 'PRTITLE1'. " COMMENTS TOOK
SELECT * FROM ZVTIKFS INTO TABLE INT_TAB.
READ TABLE INT_TAB INDEX INDEX.
ZVTIKFS-NAME = INT_TAB-NAME.
ZVTIKFS-ADDRESS = INT_TAB-ADDRESS.
ZVTIKFS-PHONE = INT_TAB-PHONE.
ZVTIKFS-AREA = INT_TAB-AREA.
ENDMODULE. " STATUS_3000 OUTPUT
*& Module USER_COMMAND_3000 INPUT
* text
MODULE USER_COMMAND_3000 INPUT.
CASE OKCODE.
WHEN 'INS'.
INSERT ZVTIKFS.
WHEN 'DEL'.
DELETE ZVTIKFS.
WHEN 'PRE'.
INDEX = INDEX - 1.
IF INDEX < 1.
INDEX = 1.
ENDIF.
WHEN 'NEX'.
INDEX = INDEX + 1.
IF INDEX > SY-DBCNT.
INDEX = SY-DBCNT.
ENDIF.
WHEN 'EXI'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_3000 INPUT
NEXT :
SAVE , CHECK , ACTIVATE .
TO COME TO DESIGN MENU
STEPS :
1 . TRANSACTION CODE : SE 80 . OBJECT NAVIGATOR WINDOW COMES .
NOTE : IF YOUR REOORT DOSENOT COME DO THE FOLLOWING PROCESS
Vey useful link:http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Other links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb2d40358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/10/e7dbde82ba11d295a40000e8353423/content.htm
For Screens
http://help.sap.com/saphelp_47x200/helpdata/en/e4/2adbef449911d1949c0000e8353423/content.htm
Screen elements
http://help.sap.com/saphelp_47x200/helpdata/en/47/e07f5f2b9911d2954f0000e8353423/content.htm
Processing Screens
http://help.sap.com/saphelp_47x200/helpdata/en/47/e07f682b9911d2954f0000e8353423/content.htm
Complex Screen elements
http://help.sap.com/saphelp_47x200/helpdata/en/fd/02da2a61d811d295750000e8353423/content.htm
DIALOG Programming
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://sap.mis.cmich.edu/sap-abap/abap09/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://sap.mis.cmich.edu/abap-00/
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com
http://www.sapgenie.com/abap/example_code.htm
http://help.sap.com/saphelp_47x200/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/dialog_programming.html
http://www.sapbrain.com/TUTORIALS/default.html
http://www.sappoint.com/abap/spmp.pdf
http://sappoint.com/abap.html
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/code/archives.asp?i=10&t=450&a=t
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/abap/
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://www.sappoint.com/faq/faqdiapr.pdf
http://www.allsaplinks.com/dialog_programming.html
Reward all helpfull answers
Regards
Pavan

How to display a table control in a report

hi
how to display a table control in a report

create a screen in your report.
Call that screen in your report.
While designing your screen, use Table control creation wizard to create table control on that screen.
http://www.planetsap.com/online_pgm_main_page.htm

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130. "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for "ASSIGN FFeld+o(l) TO " '
 TO SY-TITLE.
 Declaration of variables **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8) TYPE F VALUE '1022333'. "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2) TYPE N. "Here slack bytes are (DW border)
 "necessary
 "If you like computing error, please uncomment the above
DATA: FFELDX(8) TYPE F VALUE '7777777'.
DATA: FFELDA(8) TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
 Main Section *******************
 SKIP.
 WRITE: /5 'Example 1 **** inadmissible ASSIGN ***' COLOR 6.
 WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
 ULINE.
 SKIP 2.
 SKIP.
ASSIGN FFELD8+8(8) TO <FS1>. "<-- Assigning of variable FFELDX !!
 BREAK-POINT.
 WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
 COLOR 3.
 WRITE: /5 'Example 2'.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of FFELDX :', FFELDX.
 ULINE. SKIP 2.
 SKIP.
ASSIGN FFELD8+16(8) TO <FS1>. "<-- Assiging a few FFELDA to <FS1>
 BREAK-POINT.
 WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
 COLOR 3.
 WRITE: /5 'Example 3'.
 WRITE: /10 'Content of FFELDA :', FFELDA.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of FFELDA :', FFELDA.
 ULINE. SKIP 2.
BREAK-POINT.
 DO 4 TIMES.
 ASSIGN FFELD8+OFFX(LENX) TO <FS1>. "Zuordnung auf OFFX zu <FS1>
 WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
 COLOR 5.
 WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
 PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
 WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
 ULINE. SKIP 2.
 ADD 8 TO OFFX.
 ENDDO.
 Subroutines *******************
 Display of data fields and field symbols *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD 111 TO <FS1>. "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
 Determination of field properties (only for information) *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display the same content in the two different main windows?

Hi experts,
How to display the same content in the two different main windows?
Thanks in advance.
sarath

Hi
Sorry but you can't have two main windows in sapscripts.
Regards
Gregory

How to display all tables residing in my database

i'm using 10g express edition.
i'm developing a .net application using oracle
i want display table infomation in a datagrid
for that i need to select tables fromthe database using the interface given by them
in that i found server name field.....what it actually means?
also how to create a new database in 10g and how to display all tables residing in the database?
pls help me
thanking u
chaitanya

user11359516 wrote:
i want display table infomation in a datagrid
select owner||'.'||table_name owner_table_name
from all_tables
user11359516 wrote:in that i found server name field.....what it actually means?i'm not sute what you mean by server name field? if you refer to table column name see this code below:
select owner||'.'||table_name||'.'||column_name table_column_name,
       decode(data_type,'VARCHAR',data_type||'('||to_char(data_length)||')',
                        'VARCHAR2',data_type||'('||to_char(data_length)||')',
                        'NUMBER',decode(data_scale,0,data_type||'('||to_char(data_precision)||')',
                                                  null,data_type,
                                                  data_type||'('||to_char(data_precision)||','||to_char(data_scale)||')'),
                        data_type) type,
                        nullable
from all_tab_cols
order by table_name, column_id

How to display multiple tables from database using netbeans swing gui

plz reply asap on how to display multiple tables from database using netbeans swing gui into the same project

Layered Pane with JTables or you can easily to it with a little scripting and HTML.
plzzzzzzzzzzzzzzzzz, do not use SMS speak when posting.

How to extract HTML table contents

Does someone know how to extract HTML table contents? I want to download a html file which contains table from internet and extract the table contents. Finally, insert the table contents into database.

To do this you have to user a Parser to parse your html file and retrieve the information you want.
Please have a look at the following classes:
HTMLEditorKit.ParserCallback
ParserDelegator()
Here is an example which retrives the FRAMSET src of an html file. The purpose here is to find if the html file describes a multi-frame page or not. If so it add the frame src name to a Vector
HTMLEditorKit.ParserCallback callback =
new HTMLEditorKit.ParserCallback() {                      public void handleSimpleTag(HTML.Tag t,      MutableAttributeSet a, int pos)
     if (t.equals(HTML.Tag.FRAME))
{                                          Logger.debug(this, "Frame tag found in "+f.getURL());                     Enumeration e = a.getAttributeNames();
while (e.hasMoreElements())
                         Object name = e.nextElement();
                         if (name.toString().equals("src"))
                              Object ob = a.getAttribute(name);
                              Logger.debug("found an src "+ob);
                              currentFrameSrc.add(new String(ob.toString()));
               Reader reader = new FileReader(aFile);
                    new ParserDelegator().parse(reader, callback, false);
It's not clean but I hope it will help :-)
Stephane

How to display multi tables side-by-side

Hi All,
I need some help on BI Publisher layout.
I'd like to display two tables side-by-side in one page.
Though I can put the tables correctly in Template Builder,
the tables are joined into one table in generated Report(Preview).
- Template Builder
+[Page1]+---------------------------------------------- +
| |
| [Table1] [Table2] |
| ------------------ ------------------ |
| |EMPNO | |DNAME | |
| ------------------ ------------------ |
| | <EMPNO> | | <DNAME> | |
| ------------------ ------------------ |
| |
- Report Preview
+[Page1]+---------------------------------------------- +
| |
| [Table1] |
| ------------------ |
| |EMPNO | |
| ------------------ |
| | 1234| |
| | 2345| |
| | 3456| |
| | 4567| |
| | :| |
| | :| |
| ------------------ |
| |DNAME | |
| ------------------ |
| | ACCOUNTING| |
| | RESEARCH| |
| | SALES| |
| | OPERATIONS| |
| ------------------ |
| |
Does anyone know how to display two tables side-by-side in the
same page?
Thanks in advance.

Thanks for your quick reply.
I can display side-by-side layout as I had expected!
Thanks.

How to upright center the data of the smartforms' table content?

Hello,experts,
I find that smartforms 's format can make the table 's data level-centered ,how to make it upright centered?
pls help me out.thanks

in fact ,I have such a problem:I write a print program with smartforms ,and use A4 paper to print ,the result is good ,but when changed to stylus printer ,some line can not display.
I changed the width of the table from CM to MM.,1CM=10MM.
the col line that can not printed at fist now can be printed .so I wonder if I make the data of the table content upright centered ,whether it will be ok:I hope this measure can make the row line that can not printed out previously can be printed out .
so can you give me some solution .I will be appreciate.

How to display smartform output?

Hi,
Can anybody give me some hint on how to display a smartform output containing tables and texts in a bsp?? I have searched the forum but since I am new to bsp,I am not finding a caompact solution by following which I can get the idea. Please help..

Hi,
Check this link [Smartform PDF output in BSP|Smartform PDF output in BSP;
Hope this helps you.
Regards,
Rajani

How to display top Position Level using conditions / Exception Aggregation

Hello,
I have the following problem where I need to list out the row with the highest POSITION LEVEL (with reference to BUSINESS PARTNER). I have tried out all possibilities including Conditions and Exception Aggregation (MAX) but nothing seems to work. Conditions work to an extent i.e. it shows the top position level but unfortunately for the entire query result i.e. only one row is displayed in the result (the first row to satisfy the condition) instead of all the rows for each Business Partner. POSITION LEVEL is a KEY FIGURE value. It also exists as a CHARACTERISTIC under a diferent name in the cube. How can I solve this? Pls help.
This is how the report looks at present...
First Name     Last Name     Business Partner Nr.     Date of Birth     Postalcode     City     Position Level
Testfallini     Enzweiler     3000000020     21.10.1990     63674     New York     1
Tamara     Dimmer     3000179274     10.09.1987     54689     Chicago     2
Tamara     Dimmer     3000179274     10.09.1987     54689     Chicago     1
Tamara     Dimmer     3000179274     10.09.1987     54689     Chicago     1
Thu-Ha     Tran     3000069951     25.12.1988     93047     Atlanta     2
Thu-Ha     Tran     3000069951     25.12.1988     93047     Atlanta     1
This is how the report looks when I use conditions...
First Name     Last Name     Business Partner Nr.     Date of Birth     Postalcode     City     Position Level
Tamara     Dimmer     3000179274     10.09.1987     54689     Chicago     2
This is how the report should look...
First Name     Last Name     Business Partner Nr.     Date of Birth     Postalcode     City     Position Level
Testfallini     Enzweiler     3000000020     21.10.1990     63674     New York     1
Tamara     Dimmer     3000179274     10.09.1987     54689     Chicago     2
Thu-Ha     Tran     3000069951     25.12.1988     93047     Atlanta     2
Thanks in advance,
SD

Hi Sebastian,
I thought you need to display all the records with the highest position level at top. But now I realize your requirement.
It should only display only the maximum position level for each level.
You can try using the Condition for the position level KF, with Top N operator and value = '1'
And then go to char assignement tab in the exception and select Most Detail Chars along Rows/Individual Chars. and combinations for the required combination of Chars.
[List Condition for All Characteristics in Drilldown Independent|http://help.sap.com/saphelp_nw04/helpdata/en/86/dfc405ab60524ea0d3e89db15fb2e7/content.htm]
[Defining Conditions |http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/frameset.htm]
Hope this helps....
Rgs,
Ravikanth.

How To display a table that resides in the database via JFrame.

Hi,
I need to display the contents that present in the table that resides in my database.
Scenario:
Im having Main frame window, in that im having a button, while clicking that button a new JFrame should be opened & it should display all the rows & cols of dat table that resides in my DB.
I have no prob in opening a new JFrame during a button click, but i dont knw how to display table in the table format.
I tried JTable but i dont know how to pass the data into the JTable.
Kindly help me out!!!

JTable relies on a TableModel to deliver data. You have several ways of providing this data:
- Read it into either a Vector of Vectors (list of rows containing list of columns) or an Object[][] and create the JTable while passing the data.
- Create a javax.swing.table.DefaultTableModel, pass it to the JTable as a model, configure it and call addRow() in order to add rows.
- Create a custom table model class; see javax.swing.table.AbstractTableModel for a convenient base class

How to display a table data on Screen having a Table control

Hi ,
I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this regard.

Hi Gayatri,
After creating table control do the following steps.
1. In the flow logic section write the following code:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
LOOP AT I_LIKP WITH CONTROL LIKP_DATA CURSOR LIKP_DATA-CURRENT_LINE.
MODULE ASSIGN_DATA.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200.
LOOP AT I_LIKP.
ENDLOOP.
I_LIKP is the internal table which is used to display table data in the table control.
2. In Process Before Output, in the module STATUS_0200 write the following code:
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
In Process After Input, in the module USER_COMMAND_0200 write the following code:
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
In Process Before Output and in the module ASSIGN_DATA which is there inside the loop write the following code:
MOVE-CORRESPONDING I_LIKP TO LIKP.
So, Totally your flow logic code should be like this.
TABLES: LIKP, LIPS.
DATA: BEGIN OF I_LIKP OCCURS 0,
       VBELN LIKE LIKP-VBELN,
       ERNAM LIKE LIKP-ERNAM,
       ERZET LIKE LIKP-ERZET,
       ERDAT LIKE LIKP-ERDAT,
       MARK TYPE C VALUE 'X',
      END OF I_LIKP,
      BEGIN OF I_LIPS OCCURS 0,
       VBELN LIKE LIPS-VBELN,
       POSNR LIKE LIPS-POSNR,
       WERKS LIKE LIPS-WERKS,
       LGORT LIKE LIPS-LGORT,
      END OF I_LIPS,
      FILL TYPE I.
CONTROLS: LIKP_DATA TYPE TABLEVIEW USING SCREEN 200,
          LIPS_DATA TYPE TABLEVIEW USING SCREEN 300.
DATA: COLS LIKE LINE OF LIKP_DATA-COLS.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'LIKP'.
   SELECT VBELN
          ERNAM
          ERZET
          ERDAT
          FROM LIKP
          INTO TABLE I_LIKP
          WHERE VBELN = LIKP-VBELN.
   IF I_LIKP[] IS INITIAL.
     CALL SCREEN 200.
   ENDIF.
WHEN 'EXIT'.
   LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module assign_data OUTPUT
      text
MODULE ASSIGN_DATA OUTPUT.
MOVE-CORRESPONDING I_LIKP TO LIKP.
ENDMODULE.                 " assign_data OUTPUT
*&      Module STATUS_0200 OUTPUT
      text
MODULE STATUS_0200 OUTPUT.
DESCRIBE TABLE I_LIKP LINES FILL.
LIKP_DATA-LINES = FILL.
ENDMODULE.                 " STATUS_0200 OUTPUT
*&      Module USER_COMMAND_0200 INPUT
      text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
   WHEN 'LIPS'.
    READ TABLE I_LIKP WITH KEY MARK = 'X'.
    SELECT VBELN
           POSNR
           WERKS
           LGORT
           FROM LIPS
           INTO TABLE I_LIPS
           WHERE VBELN = I_LIKP-VBELN.
    IF SY-SUBRC = 0.
     CALL SCREEN 200.
    ENDIF.
   WHEN 'BACK'.
    SET SCREEN 200.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0200 INPUT
Save and Activate the program along with the screen in which you have included table control.
Hope this will help you.
Regards
Haritha.

How to display smartform table content in condition basis

Similar Messages

Maybe you are looking for