How to display table grid in PDF - RH10
I've created a new table style but the grids inside the table aren't showing when I generated a PDF file. I can't seem to find the setup to show the grids from the Styles settings below. I clicked Format > Boarders and Shading but there's no settings to make the grids visible.
Here's the actual PDF result:
I wanted the grids inside to display so the rows and columns have division lines.
Is there a way to resolve this? Thanks in advance.
I don't know why VJ has suggested copying and pasting as it is not necessary. Once you have created a table style you can insert it into other topics directly. VJ's link is to a RoboHelp 8 topic whereas you are using 10 where things are different.
Also adding tables is not your problem. As I understand it you have the tables in your topics, it's just that in PDF the borders are not showing, correct?
First generate to Word and see if the borders appear in the same way as in the topic.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge
Similar Messages
-
How to display Table in Interactive PDF with WD-ABAP
hi All,
I have to display a tablewith 4 rows in Interactive PDF form, and i am using WD ABAP.
These are the steps i have followed.
1. I have created a table line for the required table
2. Dragged the table line from data view to body page.
3. Wrapped the table in subform ,and made it to type "Flowable".
4. Unchecked the check box saying repeat row for each data item for table and for the header row.
Now when i preview it works fine and display 4 rows, but when the same PDF is called through Web Dynpro component, it shows an error that related to SOM Expression of that line type.
Any idea how to get rid of this error..??
If somebody could also let me know if the steps followed to display the table are correct...??
All replies will be appreciated.Solved it myself, changes the cardinality to 1:N of the context node
-
How to display two grids in same screen using SALV Method
Hi Freinds,
Please let me know how to display two grids in same screen using SALV Method.
Thank you
Regards,
SDVUsing the same concept as described in How to dispaly Three Internal Table Data (One below another) in ALV OOPS .
All you need to add is passing your new containers as r_container parementer of factory method.
"1st one
cl_salv_table=>factory(
EXPORTING
R_CONTAINER = g_top_container
"2nd one
cl_salv_table=>factory(
EXPORTING
R_CONTAINER = g_bottom_container
Regards
Marcin -
How to display table in editable mode
hi all,
I have displayed data using table wizard.Now i want to perform insert and delete row operations in table.but its displaying table in non-editable mode.
can anyone tell me, what should i do to display it in editable mode.
Thanks.Hi Swati,
Please refer the link,
How to display Table Control in Active mode
Regards,
Hema.
Reward points if it is useful. -
How to add Table element in PDF form in Webdynpro
Hello Everybody,
I am developing one application in Webdynpro using PDF form in it. I wantable control in PDF form. I read somewhere that we can add table control in PDF form. But i didnt find how to add the same. So if anybody knows then please help me.
Thanx in advance...
BhavikHi All,
Please follow these steps to create tables in adobe interactive forms.
Lets us take this example. We want to display employee information. The following fields are the one that we are going to display:
1. employeenumber
2. First name
3. last name.
First insert a "interactive form UI element" in the view. Create a value node and bind it to the data source of the UI element.
Create a subnode called "Employee".
Create 3 value attributes to display the 3 values.
Open the form designer. Insert a subform. change its type to "flow content"(default is position content) and in the next drop down, choose the value as type "table".
insert one more subform into this subform. change its type to "flow content" and from the dropdown, choose the value as "table row" and in the tab "binding", click the checkbox "min" and have its value as 1.
now drag the elements from the data hierarchy into the second subform.
save the form in the designer.
go to the view implementation and populate the nodes with the value. if this is within a loop, the content of the second subform is repeated giving the user a "table".
I hope the steps are clear.
Regards,
Chander -
How to display table in smartforms
hai
I want to display the output in table.. how to set table.. I tried with the display framed framed patterns but its not working.. is that right method?? pls give suggestionHi
Yes,you can display the contents of the output using tables.
Refer these links:
Tables in Smartforms
drawing a table in smartforms.
passing tables in smartforms
Drawing table in smartforms
Creating Tables in Smartforms
Regards,
Sravanthi -
How to display the data in PDF format
hi all,
i will give input in my selection screen and i will execute my report then it has to display data in PDF file in some directory (like c or d directory). i refered existingthreads . most of then saying using spool req we can download pdf file i.e. not my requirement. my requirement is when i click on execute button it has to display the data in pdf file with headings.
Anybody can send me the sample code please.
thanks,
maheedharHi Easwar,
i am sending my code. in this one records is splitting into 2 records.
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
vbeln type vbak-vbeln,
ERDAT type vbak-erdat,
ERZET type vbak-erzet,
ERNAM type vbak-ernam,
ANGDT type vbak-angdt,
BNDDT type vbak-bnddt,
AUDAT type vbak-audat,
VBTYP type vbak-vbtyp,
TRVOG type vbak-trvog,
AUART type vbak-auart,
AUGRU type vbak-augru,
GWLDT type vbak-gwldt,
SUBMI type vbak-submi,
LIFSK type vbak-lifsk,
FAKSK type vbak-faksk,
NETWR type vbak-netwr,
WAERK type vbak-waerk,
VKORG type vbak-vkorg,
end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
arcpar TYPE arc_params,
lay TYPE pri_params-paart,
lines TYPE pri_params-linct,
rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
'Date','Document Date','SD document category','Transaction group','Sales Document Type',
'Order reason'.
start-OF-SELECTION.
select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
FAKSK NETWR WAERK VKORG from vbak
into table itab
where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = dest
no_dialog = 'X'
immediately = ' '
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
no_dialog = 'X'
list_name = name
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
itab-ERDAT,
itab-ERZET,
itab-ERNAM,
itab-ANGDT,
itab-BNDDT,
itab-AUDAT,
itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spono
no_dialog = 'X'
TABLES
pdf = i_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
thanks,
maheedhar -
How to display employee photo in pdf through WebDynpro OR ABAP print Progr?
hi,
I have uploaded employee photos using TCODE OAOH. Now all the employee photos are stored in Archive link.
Now my requirement is i have get the employee photo and display it in PDF using PDF forms and webdynpro OR using ABAP print program.
I am able to get the employee photo from SAP archive link using ABAP code. After this i have to upload this to MIME reository. From MIME repository i have to display it in PDF forms from WEbDynpro.
I tried with ABAP print program, directly calling the PDF form in program and display the employee data with Employee Photo. With my program i am able to see only employee data. But it's not displaying employee Photo.
Plz any helps to display employee photo in PDF forms using either webdynpro OR ABAP printprogram.
If ur reply is related to WebDynpro, pla tel me how to upload photo to MIME repository From Archive Link.
Since all the employee photos are uploaded into Archive link using Tcode OAOH. From this i have to get the employee photo and upload it to MIME repository and i have to display it in PDF forms.
Any help are appreciated.......
Regards,
Shankar.Hi Sankar,
1)You can use the program BSP_UPDATE_MIMEREPOS to upload the photos in the mime repository.
2)Use the following code to get the content from your mime and set the content to your interactive UI element as Xstring format.
data:
mime_repository type ref to if_mr_api,
content type xstring,
url type string value '/SAP/BC/BSP/SAP/myBSPapplication/rajkumar.jpg' .
mime_repository = cl_mime_repository_api=>get_api( ).
call method mime_repository->get
exporting
i_url = url
importing
e_content = content.
wd_context->set_attribute( name = 'DATAS' value = content ).
Thanks,
Rajkumar.S -
How to display table in jsp pages
hi all ,
i want to diaplay the table in jsp page...ie,if i click on some option then i need to get the table in jsp page
wiil u plz help me
thanks in advance
chintuhi all..
i didnt ask how to design table in jsp...i am asking how to diaplay the table with data already stored in database...i just want to retrive the values in table and display in jsp.....
thanks in advance...
chintu -
How to display clear screenshots in PDF when default Acrobat page resolution is 110 ppi?
I want screenshots captured on my 96 ppi screen to display clearly in the PDF. But the Acrobat default page resolution display is configured to 110 ppi, not to the system setting of 96 ppi.
1) Why is the Acrobat default display 110 ppi and not 96 ppi?
2) If all Adobe Acrobat and Reader users open PDFs with the default Acrobat setting, how should screenshots taken on a 96 ppi screen be resized to display clearly?
ThanksThe concept of matching pixels in a bitmap photo to the user's display doesn't exist in PDF. Pages have physical dimensions, not pixel values, so they will always end up being resampled.
-
How to display table range navigation bar at the bottom of the tr table i
Hello,
While I am using trinidad, I have to face a critical issue. Can I display table range navigation bar at the bottom of the <tr table> in Trinidad? and remove the range dropdown list, only show the "previous" and "next" link? The project is critical on the UI, this problem is very small but has to be fixed? Does anyone have any ideas?Difficult to do? No.
<ul id="bottom-nav"><li><a hef="whatever.php">whatever</a></li><li class="last"><a hef="whatever2.php">whatever2</a></li></ul>
With this CSS -
ul#bottom-nav {
list-style-type:none;
overflow:hidden;
width:70%;
margin:0 auto;
ul#bottom-nav li {
float:left;
padding-right:10px;
border-right:1px solid #FFF;
ul#bottom-nav li.last {
border:none;
ul#bottom-nav a {
/* your styles here */ -
How to display table data without using ALV and table element.
Hi,
Its possible to display table data without using ALV and table element.
Every time i am fetching data based on (customer,status) fields and displaying these data in my output using alv
(every time i am fetching single row data ),
But problem is alv occupying more space in the output , i want to display data part only i dont want field names,
settings and header data etc..things.
Give solution to display data part..
Regards,
Rakhi.Hi,
Does you mean that you need ALV without default Function Toolbar...? If this is the case, the easy solution would have been to use Table Element rather. But, if you need to use ALV only without Function Toolbar, you can do away with that as well.
In that case, after calling GET_MODEL, you need to add few more lines of codes to achieve your goal. Those lines are --
DATA LV_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
LV_VALUE = LO_INTERFACECONTROLLER->GET_MODEL(
* Standard Filter Function setting to FALSE
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_COMPLEX_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_COMPLEX_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_FILTER_FILTERLINE_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_DISPLAY_SETTINGS_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_VIEW_LIST_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_SORT_HEADERCLICK_ALLOWED( ABAP_FALSE ).
LV_VALUE->IF_SALV_WD_STD_FUNCTIONS~SET_HIERARCHY_ALLOWED( ABAP_FALSE ).
* Standard Filter Function setting to FALSE Ends
Here as you can easily notice that LV_VALUE is instantiated on CL_SALV_WD_CONFIG_TABLE. Now, using this LV_VALUE, you set standard functions as False to dis-allow their display.
Hope this answers your query.
Thanks.
Kumar Saurav. -
How to display the data in PDF format : problem is splitting into 2 lines
Hi ,
I developed one report which downloads the data into PDF format and saved in C drive but my problem is
in my program : Line size of the report is 255 in PDF it is splitting into 2 lines. it has to show in a single line. how to do it. how to reduce the width of the output? i am sending my code below. anybody can suggest me how to do it. if possible please send me the code.
my code:
report zmaheedhar.
maheedhar-start
TABLES : vbak.
parameters : p_vbeln type vbak-vbeln.
data : begin of itab occurs 0,
vbeln type vbak-vbeln,
ERDAT type vbak-erdat,
ERZET type vbak-erzet,
ERNAM type vbak-ernam,
ANGDT type vbak-angdt,
BNDDT type vbak-bnddt,
AUDAT type vbak-audat,
VBTYP type vbak-vbtyp,
TRVOG type vbak-trvog,
AUART type vbak-auart,
AUGRU type vbak-augru,
GWLDT type vbak-gwldt,
SUBMI type vbak-submi,
LIFSK type vbak-lifsk,
FAKSK type vbak-faksk,
NETWR type vbak-netwr,
WAERK type vbak-waerk,
VKORG type vbak-vkorg,
end of itab.
maheedhar-end
DATA: pripar TYPE pri_params,
arcpar TYPE arc_params,
lay TYPE pri_params-paart,
lines TYPE pri_params-linct,
rows TYPE pri_params-linsz.
DATA: val(1), val1(1).
*---> Local Printer Name defined in SAP, Change NHREMOTE to your local printer
DATA: dest TYPE pri_params-pdest VALUE 'ZNUL'.
DATA: name TYPE pri_params-plist VALUE 'Testing'.
DATA: i_pdf TYPE STANDARD TABLE OF tline.
DATA: spono TYPE tsp01-rqident.
maheedhar-start
top-of-page.
write: 'Sales Document' , 'C Date', 'Entry time', 'Created By','Quotation date',
'Date','Document Date','SD document category','Transaction group','Sales Document Type',
'Order reason'.
start-OF-SELECTION.
select vbeln ERDAT ERZET ERNAM ANGDT BNDDT AUDAT
VBTYP TRVOG AUART AUGRU GWLDT SUBMI LIFSK
FAKSK NETWR WAERK VKORG from vbak
into table itab
where vbeln = p_vbeln.
maheedhar-end
--- Retreive local printer details
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = dest
no_dialog = 'X'
immediately = ' '
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*-- Set Spool printer details w.r.t local printer
pripar-prdsn = 'DSN'.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = arcpar
in_parameters = pripar
no_dialog = 'X'
list_name = name
IMPORTING
out_archive_parameters = arcpar
out_parameters = pripar
valid = val
valid_for_spool_creation = val1
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
IF sy-subrc EQ 0.
---> Triggers the spool creation in the sense all the write statements from hereon will be written to spool instead of screen
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS pripar
ARCHIVE PARAMETERS arcpar
NO DIALOG.
ELSE.
WRITE:/ 'Unable to create spool'.
ENDIF.
*--- Output statements
*WRITE:/ 'First Line', 'mahee','lklk','kikik','lokiuj','fffff','kijuyh','fgfgfgfg','gtgtgtgtgtgtgtgtggggggggggggggggggggggggggggggg'.
*WRITE:/ 'Second Line'.
LOOP at itab.
write: itab-vbeln,
itab-ERDAT,
itab-ERZET,
itab-ERNAM,
itab-ANGDT,
itab-BNDDT,
itab-AUDAT,
itab-VBTYP.
ENDLOOP.
"---> Close spool
NEW-PAGE PRINT OFF.
spono = sy-spono.
Convert ABAP Spool to PDF
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spono
no_dialog = 'X'
TABLES
pdf = i_pdf
EXCEPTIONS
err_no_abap_spooljob = 1
err_no_spooljob = 2
err_no_permission = 3
err_conv_not_possible = 4
err_bad_destdevice = 5
user_cancelled = 6
err_spoolerror = 7
err_temseerror = 8
err_btcjob_open_failed = 9
err_btcjob_submit_failed = 10
err_btcjob_close_failed = 11
OTHERS = 12.
Download PDF contents to presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\test.pdf'
filetype = 'BIN'
TABLES
data_tab = i_pdf
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
OTHERS = 22.
thanks,
maheedharhi tripat,
actual problem is what u said it is decreased the wiidht of the output.
now the output is:
Sales Document C Date Entry time Created By Quotation date Date Document Date
SD document category Transaction group Sales Document Type Order reason
62741 07/29/1996 11:54:38 DARLENE 00/00/0000 00/00/0000 07/29/1996 C
actual output is:
output should come in a single line. it is splitting into 2 lines.
thanks,
maheedhar -
Hi all.... how to display tables dynamically in a JSP page
im trying to display the list of tables in MYSQL datbase into a JSP.... i have a database name link on the page.... once i click on that the list of tables should be listed dynamically in the page as a link...Also is it possible to click on each table link and go to see the table details ...if so how.... please some one help me ...its very urgent........
im trying to display the list of tables in MYSQL
datbase into a JSP.... i have a database name link on
the page.... once i click on that the list of tables
should be listed dynamically in the page as a
link...Also is it possible to click on each table
link and go to see the table details ...if so how....DatabaseMetaData has a method (look in the documentation) to get the list of tables. It also has methods to get information on specific database objects
please some one help me ...its very urgent........It's even urgent that you look in the documentation. -
How to display ALV grid in a graphical display??
Hello All,
I want to display the ALV grid output in graphical format. I did not see any particular Function code or event in ALV for graphs. Hence I designed a PF status myself. But when I use the Function module "Graph_2D", it gives me an error.
Can you guys suggest which is the best Function module to display the ALV output in graphical format?
Regards,
Abhishek
P.S: Points will be awarded to the answers which will solve the issueThis piece of code is giving graphical output , u can check it in ur machine.
REPORT ZSKC_GRAPH.
data : begin of itab occurs 0,
day type i,
val type i,
end of itab.
start-of-selection.
do 5 times.
clear itab.
itab-day = sy-index.
itab-val = sy-index + ( sy-index * sy-index ).
append itab.
enddo.
CALL FUNCTION 'GRAPH_2D'
TABLES
DATA = itab
EXCEPTIONS
GUI_REFUSE_GRAPHIC = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* Give some message.
ENDIF.
You just pass ur internal table to this Function module - Do you need to display column captions etc ?? In that case you will have to use GRAPH_MATRIX_2D.
Maybe you are looking for
-
Adobe flash player keeps crashing (/questions/962745)
Just crashes every week, not daily, just weekly and I re-install it....started about 3 months ago.
-
Security level with RFC?
How much is the data secured when sent through RFC? Is the RFC using any security protocol like https? If we want to introduce the custom security to the RFC how to do that? Thanks in advance. Sounder
-
I lost my MAC password and was advised to use the "MAC" install disc. With the "install disc" installed, I initiate the program and it asks for my "password" to continue. What do I do now since I am unable to offer the correct password. Sure would
-
Hi, While i create a report with grid display with oops ALV using custom container, its giving short dump.. DUMP: CNTL ERROR ouccured..
-
We have a small network of eMacs logging on to a PowerMac G5 using Directory Access. The clients are 10.4.4 and the server is 10.4.4. Everything works perfectly. We are trying to set up Group Preferences. We have multiple user accounts some of which