How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

Similar Messages

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How to display 2 lines in the same column header of jTable?

Please could you help me to display 2 character lines in the same column header of a JTable?
And how to make a fusion between to cells?
Thank you very much

In Swing, most components will accept text in the html format
http://java.sun.com/docs/books/tutorial/uiswing/components/html.html
You can then use <br> tags to make your header text multiline

How to load this value into the master data display attribute

Hi ,
Please share me the knowldege how to load this kind of data into master data display attribtes ..
Raj + Ravi Ltd (PCG: 13592)
While loading this data ,i got the error message stating that '+' should not be part of the attributes and () should not be part of the attribute ..but i need all the information as it is available in the example data .
Do i need to maintain RSKC Settings else some other things required ..
Please guide me ..
Regards,
Raj

HI,
Maintain these symbols in RSKC and try to reload the data....

How to display null values in the graphs, when i select a date range?

Hi,
Can you please help me in achieving the below requirement:
We have a date promt, i have selected the date range from 12-Oct-2009 to 15-Oct-2009 and clicked on the go button.
In the above date range, data is only availabe on 14-Oct-2009. here the requirement is to display as all the records (12th, 13th , 14th & 15th) in the bar graph.
Currently the graph view is displaying the data only for 14-Oct-2009 in the bar graph.
If data is not available it should display in the bar graph as empty for that particular dates.
Help is highly apprieciated.
Thanks in Advance.

Check out [this post|http://obiee101.blogspot.com/2009/04/obiee-showing-zero-in-bargraph.html].

How to display Zero values in the chart

Hi,
In BO design studio 1.3 we are using bar chart and line chart for one of the dashboard. we have enabled the data labels and data is also displaying in the chart, but for certain criteria the data is itself zero in the database. In such scenario chart is not showing zero as the data label and it is simply blank. Is there any way to display the values even though it is zero?
Thank You,
Palani.

Hi - I don't see a way to do that; if you want that in the future I recommend posting something on Idea Place - ideas.sap.com

How to display field values in long text of messages....

Hi,
Currently iam doing an userexit. In that i want to display error messages. and if we click on message it will display the long text. My question is i want to display field values in the long text. Under the long text's &system_response& i want to display a field value.
Regards
chinna

Hi Chinna,
Within short and long texts, you can use placeholders, which can be replaced with the content of data objects using the MESSAGE statement. A maximum of four character-type placeholders are permitted; they are indicated by #&i# in short texts, and by #&Vi&# in long texts, where i = [1, 4]. If #&# itself is to be displayed as part of the text, it must be specified as #&&# in short texts and as "&" in long texts.
To add some detail on how to create variables in Long text, you have to go to 'commands' and in symbol option provide the variables like
&V1& &V2& and so on.
Hope this helps you.
revert for further clarification.
<b>Alwyas reward Points to useful suggestions.</b>
Regards,
Vikas
Message was edited by:
Vikas Taneja

How to dispay the text values of the info objects in my transformations

Hi
Can any one say how to do a lookup for a text table. For example for a particular customer number i need to get the customer name from the text table.In the same way i need to display the text values of the info objects in my transformations. It would be great if any one could send me the code.
Thanks
R

Thanks for the immediate reply Anshul, Actually i am having the fields of short description and long description in my text table, my requirement is to display only the long description data in the text table. So it would be great if you could get me the solution.
Thanks
R

How can i do to see the master and text values of the Key figure 0UNIT

Hi gurus,
How can i do to see the master and text values of the Key figure 0UNIT, please step by step, i m in the key figure 0UNIT but i want to see if the UNIT for example BX = BOX, something like this is that i want to check, thanks!

If you look at the unit tables, you will see the values and texts. It's in SPRO, not in RSA1. My access is limited on my system here, but the documentation says to go to t-code CUNI. I believe in that tcode you can look at all of the unit equivalencies and what each unit's text is ..... like an ea means each; KG = Kilogram; etc...
I am on an 3.x system, so in SPRO I go to BW CIG=>General Settings=>Check units of measurement.
Brian

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

How to display filter values in analyzer

Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,

It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it.

How to display negative values in a screen field of a screen

Hi All,
Please let me know how to display negative values in a screen field of a screen.
thanks

Hi Kishore,
You can do this method. In the screen , create a text field of CHAR instead fo creating an INT4 field.
I have created a field of CHAR of name say TEXT.
In the main program,
declare a variable of the same name ie. TEXT.
data: TEXT(5) TYPE C.
In PBO, just assign the negative values.
It will work.Since there is automatic conversion between character and integer data types, it will work for positive values as well.
Regards,
Sylendra.

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to show colmn value in the legend in ssrs Chart?

How to display Legend values in my ssrs Report like below
I want the values like below.
SuccesCount-2000
FailCount-100
No status-150
Can U pls help me for this
ThanX!

I will found the soluction for this ,
Go to Chart Area ->Series Properties->Left Side you have noticed Legend->There you need to add expression in the
fx
i.e ="SuccessCount" & " "& Fields!SuccessCount.value
so you finally get the out put like below
o/p :SuccessCount 2000

How to display text value in the header data (Header text) of credit memo

Similar Messages

Maybe you are looking for