How To Display the directories of a System.
How To Display the directories of a System.
Hmm I think you need to be more specific. Do you mean like this:
File f = new File("c:/");
File[] fs = f.list();That lists all the files in that folder, then you can use the method isDirectory to check it. Mind you, you would have to go though every folder.
Similar Messages
-
How to display the time length of video (current time/ total time) ?
Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
// technique
48000.0F,// sampleRate the number of samples per second
16, // sampleSizeInBits the number of bits in each sample
2, // channels the number of channels (1 for mono, 2 for
// stereo, and so on)
4, // frameSize the number of bytes in each frame
48000.0F,// frameRate the number of frames per second
false); // bigEndian indicates whether the data for a single
// sample is stored in big-endian byte order
// (false means little-endian)Can you please suggest where I am going wrong ? -
How to display the JSP output in the same page....
im new to JSP..... can anyone tell me how to display the output of a particular JSP page in the same page itself...... if anyone could send a small sample code it will be very useful for me....
thanks in advance
regds
Krish......Hi Robert -
When you say you are writing a template-based Renderer, do you mean that you are creating a custom look and feel and replacing the header Renderer? If so, I'd recommend instead simply creating your own template (not template-based Renderer), and reference your template directly from your uiXML pages where you want to insert the timestamp.
You'll probably want to write a method data provider which calls System.currentTime(), convert the result to a date, and then use Java's date formatting capabilities (see java.text.format.DateFormat) to produce a user presentable String that you can return from your data provider.
For more info (and samples) on templates and data binding, see the "Templates and Data Binding" section of the "Includes and Templating in ADF UIX" help topic:
http://tinyurl.com/5b7bf
Andy -
In sales stage combobox how to display the step of the process coach
On the business talk page, in sales stage combobox how to display the step of the process coach and can be selected, not only sale stage?
thank you.For example, in salesprocess list, there are SystemSaleProcess, RenewalSalesProcess and DefaultSalesProcess.
And SystemSaleProcess includes grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstages.
And grasp of the situation, including needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps.
Now in deal page, the deal type selected SystemSaleProcess, the salesstage is grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstage can be selected in the salesstage drop-down box.
But if want to choose more than salesstage, would like to choose needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps in the salesstage drop-down box, then how to do it?
thank you. -
[help]How to display the subsets
I'd like to know how to display the subsets of the set that has
k elements.
For example,
if a set S={a,b,c},
then its subset is
{a},,{c},{a,b},{b,c},{a,c},{a,b,c},null}.
How do I code the above program in Java?
Any help??public class Subsets {
public static void main(String[] args) {
int k = Integer.parseInt(args[0]);
int sets = 1 << k;
for (int i = 0; i < sets; i++) {
if (i <= 0) {
System.out.print("{null}");
else {
StringBuffer buf = new StringBuffer();
int j = i; char c = 'a';
while (j > 0) {
if ((j & 1) > 0) buf.append(c);
j >>= 1; c++;
System.out.print("{" + buf + "}");
System.out.println();
} -
In sap scripts how to display the driver program
Hi,
I Want to know the sap scripts How to display the output to driver programHi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju -
How to display the sort value in the selection screen in the report title
Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun SHi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM -
How to display the header data on different position in alv report
hi all,
how to display the header data on different position in alv report.
for example ,
customer name
xxxx xxxx
vendor name street
xxxx xxxx xxxxx
pls help me .hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks -
HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS
HI,
HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back -
How to display the Buyer's signature in PO BI Publisher Report
Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance. -
How to display the results in order by based on search value
Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID TITLE
10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11 CICCONE, MADONNA (CA)
12 DALLIN, MADONNA LOUISE/STOCK
13 MADONNA
14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15 MADONNA (CA)
16 MIRWAIS AHMADZAI, MADONNA
17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18 MADONNA (CA),CICCONE
Expected output :
13 MADONNA
14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15 MADONNA (CA)
18 MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
RajasekharThis may be a bit more accurate:
SQL> SELECT *
2 FROM TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5 ,TITLE
6 ;
SONGID TITLE
13 MADONNA
14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15 MADONNA (CA)
18 MADONNA (CA),CICCONE
12 DALLIN, MADONNA LOUISE/STOCK
11 CICCONE, MADONNA (CA)
17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
16 MIRWAIS AHMADZAI, MADONNA
10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA) -
How to display the fields in ALV Output without using Field catalog?
How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_grid_title = 'REPORTING'
is_layout = gt_layout
it_fieldcat = lt_fieldcat[]
tables
t_outtab = itab. -
How to display the proxy settings for a specific group of servers in an OU ?
Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010] -
How to display the text as a Bold in the Text Element of a Smart Form
Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
(This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
Give the name of paragraph format in the editor.
P1 &WA_KNA1-KUNNR&
If it is CHARACTER FORMAT,
<C1> &WA_KNA1-KUNNR&
Thanks,
Nithya. -
How to display the time 00:00:00 as blank?
Dear Friends,
I have created a new field GDF_9000_CREATED_AT in the normal screen (dynpro), the format is TIMS, however, when there is no value for it, is always display like "00:00:00" on the screen.
So how to display the time 00:00:00 as blank in the normal screen (dynpro) when there is no value for it?
Thanks a lot!!In screen PBO module:
LOOP AT SCREEN.
if screen-name EQ 'my_time' AND my_time EQ time_zero.
screen-invisible = 'X'.
screen-active = 0.
MODIFY SCREEN.
endif.
ENDLOOP.
I don't try this, but i think is true...
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Edited by: Marco Modenese on May 7, 2009 10:36 AM
Maybe you are looking for
-
Reposearch: a tool for finding binary repos
Info page: http://xyne.archlinux.ca/info/reposearch After following this thread I got the idea to create a database for third-party binary repositories. I started by grabbing all of the binary repos listed on the Unofficial User Repositories wiki pag
-
How to automatically send report after it is created?
Hello, I am beginner and I would appreciate if someone could tell me general information. I found this tutorial how to save and access report. Storing and Accessing Reports in the Database In that tutorial report is saved onclick. Is there a way to a
-
Shared Calendar Invites Keep Repeating
Off the top, this is likely a rare situation, but with my setup, it happens often. We have three iCloud accounts that regularly invite each other to events through Calendar, however, these calendars are also shared (read-only) to each other. The sh
-
Connectivity issues with AE card after v4.2 update on 10.3.9
Teach me not to read up on updates before installing them, though I suppose I shouldn't have to....grr. Stupid lack of quality control. Anyway, I have a 1.25ghz PB running os 10.3.9, and my network was running just fine before I installed the update.
-
I upgraded from iPhone 3G to 4S a few days ago. When setting up the new 4S, I choose to restore my last 3G backup. It started by updating the OS to version 5.1 (9B179) then restored my apps and setting. Everything went well except that I realized I d