How to display the entire RSS article in Mail?

OK, this is what I really thought RSS in Mail was going to be... Since I only have access to email at work and no web browser, I had hoped to forward all those RSS feeds to my work inbox so I could then read the paper or whatever, while still looking like I'm at my desk doing work! Ha!
So, how can you get Mail RSS to display the entire article right in Mail so I can use the forward feature and forward all those articles that I want to my work email address?
Any ideas would be greatly appreciated!
This way I don't have to click on my web browser, "Email article", as they would already be in my mailbox ready to be forwarded!
Thanks.

RSS (http://www.rssboard.org/rss-specification) is an open format that allows users to aggregate content from different web-sites into a single "channel". The standard has very few "required fields" that boil down to:
title
brief description
link
The rest is optional, i.e. up to the publishing website to decide whether to make available or not. It is also important to know, that many RSS feeds refer to content that is protected by copyright and hence must be reproduced under the terms decided by the publisher.
Full text is not an optional field of RSS. Some websites may decide to use "brief description" to feed an entire piece of content, but that is not a standard behavior.
In other words: what You're looking for can not be achieved through RSS feeds. Getting back to Your original problem - no web access at work – I'm wondering: how come You get RSS feeds and can not read the web pages? RSS feeds are using the same protocol (HTTP) as web pages and unless there's a very sneaky firewall involved, Web browsing should not be a problem.

Similar Messages

How to display the entire application in two different languages in apex

Hi,
How to display the entire application in two different languages in apex...
For example i need to display each item in both English and Hindi..
To achieve this initially i have the select the language otherwise the item label alone ll be displayed in both languages ...
Anyhow how it ll be apex is it possible
Regards,
Pavan

Hi pars,
http://www.packtpub.com/sites/default/files/1346-chapter-6-creating-multilingual-apex-applications.pdf?utm_source=packtp…
In this link also i struck in
In page 10 of that document
The application is now ready to be translated. Everything is in place to run it in any language imaginable.To ca ll the application in another language, change the URL of your application to the following:
http://yourdomain:port/pls/apex/f?p=&APP_ID.:&PAGE_ID.:&SESSION_ID.:LANG:NO::FSP_LANGUAGE_PREFERENCE:nl
This example will call the chosen page in the application and show it in the Dutch language instead of in English. To select another language change the property nl at the end of the URL to your desired language code.
Thanks alot for ur suggestions.kindly provide more inputs..............

How to display the entire double number without the Exponent

I know this is silly, but please help.
myString ="45.5"
myBytes = Double.parseDouble(myString );
convertedBytes = (myBytes * 1048576.0);
System.out.println(myBytes + "MegaBytes = " + convertedBytes + "Bytes");
prints:
45.5MegaBytes = 4.7710208E7Bytes
How do I output:
45.5MegaBytes = 47710208.0Bytes

Thanks,
I think I am just going to go with
println((int)Math.floor(mydouble + 0.5d));Note:
- you shouldn't cast to an int, we never know (e.g. try with > 2048MB.)
- you could use round(mydouble) instead of (long)floor(mydouble + 0.5d) (both are equivalent, but the first one looks clearer IMHO.)

Is it possible to display the entire list in Background ?

Hi all,
I have alv report(Oops) , it is grid display and having more than 300 columns , when i execute that report in background i am getting only 132 columns and 65 lines per page, Is it possible to display the entire list , If it is possible then how we can do that? if it is not what is the reason? .
Thanks in Advance.

Hi,
If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
for more info ask ur basis person to create a new print formats in such cases.
Regards,
shiva.

How to display the image which in KM folder using url iview

Hi Friends
How to display the image, which is under KM folder structur using the url iview.
i trying using url iview url as \document\testfolder\abc.jpg as url for the iview.
but its now working .. so please help me how to slove this problem
If is not the correct way then please suggest me best way to achive this.
Thanks
Mukesh

Hi Mukesh,
I think this may work,
1, Create a HTML Layout.
    You can put your image wherever u want with HTML Codes.
    Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
    With this, u can use the standard KM commands also.
2, U need to use KM Navigation iView for this rather than KM Doc iView.
3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
Regards
BP

Display the entire path to the term in the field option programmatically

hi,
I am having hundreds of doc libs with a taxonomy column .now i want to change the property diaplay format:
Display the entire path to the term in the field option, programmatically.
can anyone pls help how to achieve this. i am thinking of writing a consoel appln which iterates through all the sub sites on my site collec and all doclibs and want to access this taxonomy columns and change this display format .
but i am stuck with whats the property responsible for this.
help is appreciated!

hi Benjamin,
Please try IsPathRendered Property of the taxonomy field. It is a Boolean field which related to display format of a taxonomy field.
FALSE - Display term label in the field
TRUE - Display entire path of the term in the field
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.taxonomy.taxonomyfield.ispathrendered(v=office.14).aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

TS1307 My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.

My email won't send as when it was set up an extra letter was accidentally inserted in the address. I need to know how to remove the entire email address and start a fresh.

Launch Mail.app, select Mail > Preferences... > Accounts and select the account you need to edit in the left column.
The receiving information will be displayed for the selected Account, with a pop-up selector for the Outgoing Mail Server (SMTP) toward the bottom. That selector shows which mail server will be used with this account; to send mail.
Click and hold on that selector, and scroll down (holding the mouse or trackpad clicked) to Edit Mail Server List... and you'll get a sheet dropping down with the mail servers listed.
Select the problematic mail server, and edit it using the Account Information and Advanced items on that sheet.

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the Buyer's signature in PO BI Publisher Report

Hi,
How to display the Buyer's signature dynamically in XMLP Purchase Order Report.
Please anybody help on this.Your help greatly appriciated.

Hi All once again
I was able to display the signature on XMLP AP Check Print Report by went through the follwoing Tim's blog http://blogs.oracle.com/xmlpublisher/2006/04/13#a12
But in Purchase Order report requirement is different. We need to display the Buyer's signature on XMLP PO Report. So, where is the best place to store the buyers signatures.(For example if we have 10 buyers with 10 signatures respectively then after approving the PO, we should display that particular buyer's signature in PO XML Publisher report).We observed that in byuers & User's form there is no attachment feature enabled.
This is an urgent requiremnt. Please help/guide/suggest to resolve this issue.
Thanks in advance.

How to display the results in order by based on search value

Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE   VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE
Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
Rajasekhar

This may be a bit more accurate:
SQL> SELECT *
2 FROM   TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5           ,TITLE
6 ;
              SONGID TITLE
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

How to display the fields in ALV Output without using Field catalog?

How to display the fields in ALV Output without using Field catalog?
Could you pls tell me the coding?
Akshitha.

Hi,
u mean without building field catalog. is it? I that case, we can use the FM REUSE_ALV_FIELDCATALOG_MERGE.
data: itab type table of mara.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = itab
CHANGING
ct_fieldcat = lt_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
*Pass that field catalog into the fillowing FM
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_grid_title            = 'REPORTING'
            is_layout              = gt_layout
            it_fieldcat             = lt_fieldcat[]
       tables
            t_outtab                = itab.

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

How to display the entire RSS article in Mail?

Similar Messages

Maybe you are looking for