How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

Similar Messages

  • How to not display the error message ?

    hi everybody,
    I would like to know if it is possible to not display the error message in BO XI R2 when I try to refresh my reports ?
    (like "the query bla bla does not fetch any data...")
    Thanks for your help,
    Mario

    I've found this method to not display this error message but  the problem is that the prompt message when you refresh the report are not displayed:
    Has someone an idea ?
    Private Sub Document_BeforeRefresh(Cancel As Boolean)
    Application.Interactive = False
    End Sub
    Private Sub Document_AfterRefresh()
    Application.Interactive = True
    End Sub
    Edited by: Pascolo Mario on Oct 22, 2008 4:35 PM

  • How to populate the error message in OVS search popup

    Hi All
    We have the following requirement to display the error message in the OVS popup.
    currently we are opening an OVS popup on click of an action successfully.
    Currently we had put the error message in the ApplyResult() method, but error message was not displaying on the screen in the OVS popup itself & currently popup is being closed which should not happen
    Thanks
    Kalki Reddy

    Hi,
    Currently we had put the error message in the ApplyResult() method, but error message was not displaying on the screen in the OVS popup itself & currently popup is being closed which should not happen
    the OVS is not in our control its framework controlled. when applyResult method is called, framework automatically closes the pop up and shows the error messages in the main window( if any error is thrown in the apply result method) .
    Please give more details about ur requirement.
    regards,
    Akila

  • How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

    During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error?  I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data?  If any one could help me that would be of great help.. Thanks

    Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

  • How to customize the error messages in web analysis reports

    Does anyone know how to customize the error messages that web analysis shows ,
    I want to customize the below error message with a custom error message
    "Document does not exist or no authorization to open document.Error occurred while loading document"
    Does anyone know how to do this ?

    Rajesh,
    you may want to check these links
    How to the Change the Application Stopped Message
    How to Change the Dispatcher Running, No Server Connected Message
    http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
    Thanks
    Bala Duvvuri

  • TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    how to fix the error message itunes can't sync apps because it can't determine what apps are installed

    Hi,
    This may be Helpful 
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • How to get the Error message from hr_contact_rel_api.create_contact

    Hello All,
    I am using this API for creating a contact for an employee in R12.
    But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
    I dont find any out msg data variables for this API in order to check it for the Error.
    So, can any body help me how to get the ERROR Message for such APIs.
    Thanks inAdvance,
    Amarnadh Js

    user12243334 wrote:
    solved the issue on myselfIt would be nice if you could share the solution with us.
    Thanks,
    Hussein

  • Please help me how concatenate all the error messages and send it as out parameter value.

    Hi Experts,
    Please help me how concatenate all the error messages and send it as out parameter value.
    Thanks.

    Agree with Billy, exception handling is not something that is done by passing parameters around.
    PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine.  Avoid misuing PL/SQL by trying to implement some other way of handling them.

  • How to Customize the Error Message when a user enters a wrong password

    Hi Gurus
    Pls Help out me that
    How to Customize the Error Message when a user enters a  wrong password ?
    I need the Help to Customize the messege ?
    How  we can do
    Pls Tell me indetail

    Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
    The file you need is actually a portal .par file and can be found in the deployment/pcd directory.  The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time). 
    You need to copy this file to a local machine and unzip the contents.  The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar.  It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
    In this file you will find lines like:
    NUMERIC_REQUIRED=Invalid new password (must contain digits)
    You need to identify which texts you wish to modify and edit the text to the right of the equals sign.  Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension.  Then logon to the portal and upload the new par and you should see your new logon messages.
    Haydn

  • How to get the error message from a AWS code to display on the portal

    I implemented IAuthProvider, it works, within the code when authentication fails, I threw AccessDeniedException(customMessage) but when the login fails, the login screen always display the "You could not be logged in to the portal." error message, how can I get it to display the custom message? Am I throwing the wrong exception?
    TIA.

    Simpler? Uhm as far I know there doesn't exist any magic and you have just to write one or two lines of Javascript code yourself. Is that hard?

  • How to display an error message on screen?

    Hi experts,
    In screen painter, how to display an error message in the message area just below the screen?
    Thanks!

    hi wuyia,.
    Write like this;
    Message 'Process completed Successfuly' TYPE 'S'.
    Message 'Want to Overwrite Value' TYPE 'W'.
    Message 'Press enter to continue' TYPE 'I'.
    Message 'Invalid Input' TYPE 'E'.
    S - Success
    W - Warning
    I - Information
    E - Error
    You can adjust your GUI option to display the message in a Popup or in the status bar.
    Regards
    Karthik D

  • How to display the error message during the web dynpro application runtime

    hi,
        I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
        But when i do the same on server-2,there just show something like:
                500   Internal Server Error
                                    SAP NetWeaver Application Server 7.00/Java AS 7.00
                Failed to process request. Please contact your system administrator.
    but the server-1 will stop the j2ee engine. 
    how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
    Appreciate your inputs...
    (Note:server-1 and server-2 have same software version)
    Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

    The Sap-Notes 962319:
    1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
    If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
    If it is undefined, proceed with the next step.
    If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
    2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
    3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
    4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
    a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
    b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
    Always consider restarting the system after making changes on the settings.
    It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
    In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

  • How to find the error message populating for infotype 2001 iN pa30

    Hi ,
    I got a requirement that one of our end user a a error message is populating when he tries to enter the data in 2001 absences infotype.
    I check the documents ...it is written as a there is long back they modified the original T-code of 2001(report or userexit not sure) to allow only HR Department people , no one can enter the details apart from HR ,no-one else should be able to do that!!
    Now i need to find where the error message is getting .............i dont know what is the best approach,
    i debugged it(before savgin) but its too long to find......I put the break points for the user-exits available for the infotype(Total i found 16 Package PTIM) ......no user-exit is triggerring..i searching from morning....
    The main problem is  it is working fine for me.I am not getting error message...so unable to catch
    Please help me how to search...or need to search with 'AUTH ' field? if so in how many programs?
    or need to search using the 'MESSAGE' i just have the screen shot of the message..with the content how could i found that ??
    waiting for your valuable inputs....
    regards
    sas

    Hi Gautam,
    Thanks for reverting back, but my problem is i am not getting error message!!
    enduser is getting that!!
    Rgars
    sas

  • How to Handle the error message?

    Hi,
    Can any one help me in handling the error messages in application,
    In my application, I am having 2 buttons, one is display button, and the other is reset button. When we enter wrong inputs, it prompts an error message and again we I click on reset button the application goes back to its normal stage i.e. the error message will be disappears. These things will happen in the same page. I have tryed to know the any Id/Name of error message.
    So please help to handle error and skip that error then continue execute raming code.
    Thanks
    Buntty

    A few problems with this question that need clarification:
    You're using a GUI, but we have no way of knowing which one -- Swing? AWT? SWT? other?
    You ask how to fix your program flow and logic but don't show us the current state. Most of us can't read minds so a bit of code would be nice here.
    You mention "Page". What context is this in?
    A great resource that has helped me and will probably help you is an article entitled [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] . It will tell you how to formulate your questions so that the folks here will be better able to answer them. Good luck.

  • How to clear the error message?

    I use the <h:message> tag to show the error message, how can i clear the error message in jsf , is ajax4jsf can do so? thanks!

    The messages are request scoped. Why do you want to clear it anyway? Once no error is occured, then no message will be displayed.

Maybe you are looking for

  • Easy way to schedule a job to run for a set period?

    Is there an easy way to schedule (dbms_scheduler) a job to run for a set period -say, half an hour- and then to stop. Currently, I schedule a procedure to do the work (a bunch of inserts or updates, say) and the first line of that procedure assigns s

  • Error while making an epub from InDesign CS4

    I'm trying to make an epub from a book pallette in InDesign CS4. I get this error message: Could not find required entry in archive: OEBPS/\QBones%20cover%2015%20ePub%202.xhtml|\ so the document won't open in Stanza. Although it will in Adobe Digital

  • Web Service Call From Consumer Proxy in ABAP: Security Settings

    Hello All, Have a couple of questions: We are working on a scenario where we have to connect to a web service from ABAP. We have extracted the WSDL, and generated the client proxy, and configured a Logical Port. However, at the time of actual call, w

  • Performance tuning oracle 10G on Windows 2003

    Hi, At present we have 8GB physical RAM on Production server while the parameters sga_max_size = 1 GB and pga_aggregate_target = 629 MB are defined. When I hit transaction ST02 I observed that values for swaps are showing in red color for program, sc

  • Release the camera software goodies from z2 to z1

    Dear Sony z2 is amazing phone but its no different from z1 and z1s so please release all the camera feature and a good camera algorithm to take good quality low light pictures if u don't Sony will loose many customers i have seen some samples from z2