How to display the first node in a nested folder?

If my navigation structure has nested folders and the first page node is in a nested folder. Is it possible to have user click the outer folder and the first node displayed in the content area?

Hi there,
please refer to the document "Installing Patch 4 for Enterprise Portal 6.0 SP2" (EP6SP2Patch4_install_v5.pdf) to be found on Service Marketplace; there: "6.3 Navigation Enhancements", there: "6.3.2 Default Entry for Folder" & "6.3.4 DTN: Clicking Folder Name Launches First Node".
This should answer your question if you think about nesting with one level (I don't think it works over more levels, imagin Folder A only with subfolders, for instance Folder AA with a page AAA under it. Clicking on A will not open AAA, I think, even if this is the first "displayable" element; but I didn't check it out).
Hope it helps
Detlev

Similar Messages

How to display the first page alone first and two pages (back and front) then ?

Hi
I use acrobat 9 (beginner).
I have a document which should be displayed "as a book", ie two pages on the screen at the same time, the back of the first sheet and the front of the second one.
The problem I have is to manage to display the cover sheet as a single page (alone) and then to have the dual page layout as described above.
How could I do that ?
Thanks for your help
Regards
Fanch

Hi Bernd
Thanks a lot.

How to display the Hierarchy Node Level in BEx

Hi Folks,
In my report I have a Hierarchy. I have to display the Node level of the Hierarchy in the output.
For Eg:
If I have BB under AA root node then in the output it should display Level 1 for AA and Level 2 for BB.
Thanks in Advance.
Regards,
Srikanth N

I don't think it is possble to display the hierarchy level in the report itself.
However, if you go to properties of the characteristic where you have the hierarchy defined, there you can expand the hierarchy to a pre-defined level...I guess you know that.
AT

How to display the tree nodes distinctivly.

Hay all,
Frnds , i am facing a problem. I have created a tree whose each node consisted of a checkbox and a label. For that i have used DefaultMutableTreeNodes for tree nodes and a TreeCellRenderer. Is there any method or way to display some nodes distinctively(may be in different color or something else). Plz tell me soon its very urgent.

Hi Jürgen,
See http://help.sap.com/saphelp_nw04/helpdata/en/44/6aaf92f5a23672e10000000a114a6b/frameset.htm
Only Worksets and Roles are not described, anyhow, doing a bit research via decompiling or just by searching on SDN will bring you the needed extra info; just as an example for roles access: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401
Hope it helps
Detlev

How to display the image which in KM folder using url iview

Hi Friends
How to display the image, which is under KM folder structur using the url iview.
i trying using url iview url as \document\testfolder\abc.jpg as url for the iview.
but its now working .. so please help me how to slove this problem
If is not the correct way then please suggest me best way to achive this.
Thanks
Mukesh

Hi Mukesh,
I think this may work,
1, Create a HTML Layout.
    You can put your image wherever u want with HTML Codes.
    Check this, [Article|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3915a890-0201-0010-4981-ad7b18146f81] & [Help|http://help.sap.com/saphelp_nw04/helpdata/en/cc/00c93e9b2c3d67e10000000a114084/frameset.htm]
    With this, u can use the standard KM commands also.
2, U need to use KM Navigation iView for this rather than KM Doc iView.
3, In the Nav iView, u can use &rndLayoutSet=nameOfUrHTMLLayout to force the view with this new layout.
Regards
BP

How do I grab the first node

I have this XML..
<node Kids="5" label="1105 Media">
<node Kids="0" label="101 Communications"/>
<node Kids="0" label="1105 Government Information
Group"/>
<node Kids="0" label="CPM Group"/>
<node Kids="0" label="FTP Online"/>
<node Kids="0" label="Stevens Publishing"/>
</node>
How do I grab the first node?
<node Kids="5" label="1105 Media">

Lots of ways to do it and here is one way
myXml is your xml with the node values.
var x1 : XMLList = myXml.children();
var x2 : Object = x1[0];

How can I display the first and last name using a paramater as employee ID?

Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
Z

Hi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay

How to display a Hierarchy node for level 2 without parent and description

Hi,
How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

Hi,
I dont think this would be feasible to display in different columns.
-Vikram

How to display the results in order by based on search value

Hi All,
how to display the results in the below order.
CREATE TABLE TEST( SONGID NUMBER, TITLE   VARCHAR2(200))
INSERT INTO TEST(SONGID,TITLE) VALUES (10,'AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (11,'CICCONE, MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (12,'DALLIN, MADONNA LOUISE/STOCK');
INSERT INTO TEST(SONGID,TITLE) VALUES (13,'MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (14,'MADONNA (A)/ AHMADZAI, MIRWAIS (C)');
INSERT INTO TEST(SONGID,TITLE) VALUES (15,'MADONNA (CA)');
INSERT INTO TEST(SONGID,TITLE) VALUES (16,'MIRWAIS AHMADZAI, MADONNA');
INSERT INTO TEST(SONGID,TITLE) VALUES (17,'MIRWAIS (CA)/ MADONNA (CA),AHMADZAI');
INSERT INTO TEST(SONGID,TITLE) VALUES (18,'MADONNA (CA),CICCONE');
SELECT *FROM TEST WHERE INSTR (TITLE, 'MADONNA') > 0
output:
SONGID     TITLE
10     AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)
11     CICCONE, MADONNA (CA)
12     DALLIN, MADONNA LOUISE/STOCK
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
16     MIRWAIS AHMADZAI, MADONNA
17     MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
18     MADONNA (CA),CICCONE
Expected output :
13     MADONNA
14     MADONNA (A)/ AHMADZAI, MIRWAIS (C)
15     MADONNA (CA)
18     MADONNA (CA),CICCONE
...if user searches with 'MADONNA' , I have to display the results like title starts with 'MADONNA' first then rest of the records.
Please let me know is it possible to display the results in that order.
Regards,
Rajasekhar

This may be a bit more accurate:
SQL> SELECT *
2 FROM   TEST
3 WHERE INSTR (TITLE, 'MADONNA') > 0
4 ORDER BY INSTR (TITLE, 'MADONNA')
5           ,TITLE
6 ;
              SONGID TITLE
                  13 MADONNA
                  14 MADONNA (A)/ AHMADZAI, MIRWAIS (C)
                  15 MADONNA (CA)
                  18 MADONNA (CA),CICCONE
                  12 DALLIN, MADONNA LOUISE/STOCK
                  11 CICCONE, MADONNA (CA)
                  17 MIRWAIS (CA)/ MADONNA (CA),AHMADZAI
                  16 MIRWAIS AHMADZAI, MADONNA
                  10 AHMADZAI, MIRWAIS (CA)/ MADONNA (CA)

How to show the first page and then rest will be created in background

Dear Friends,
I am suffering from some seriouse issue of slow opening of report....
I am using vs2005 and asp.net 2.0 and crXI R2 sp4,
using oledb for getting data from ms sql server 2005.
Now my one report called accounts ledger
when i execute the report query it takes 1.03 mins for 515000 records..no issue with it ,
when i execute the report from report desginer for 515000 records its taking 26 mins . It is generating all
32000 pages.
Now same report i run from my web based erp application it takes 30mins to execute 32000 pages now
this is too much time it is taking and now our client is fedup of ussss..
So is there any way that we can show First page at the earliest and rest of the pages willl be getting created in background? is it possible ?
We have to give them the solution as sson as possible...
can anyone suggest the diff ways to get out of this problem .......
Please ur co operation will be appriciated....
thansk

Hi Mithun,
Here are a few points related to performance issue. These might be helpful.
The performance of a report is related to:
External factors:
1. The amount of time the database server takes to process the SQL query.
( Crystal Reports send the SQL query to the database, the database process it, and returns the data set to Crystal Reports. )
2. Network traffics.
3. Local computer processor speed.
( When Crystal Reports receives the data set, it generates a temp file to further filter the data when necessary, as well as to group, sort, process formulas, ... )
4. The number of records returned
( If a SQL query returns a large number of records, it will take longer to format and display than if was returning a smaller data set.)
Report design:
1. Where is the Record Selection evaluated?
Ensure your Record Selection Formula can be translated in SQL, so the data can be filter down on the server, otherwise the filtering will be done in a temp file on the local machine which will be much slower.
They have many functions that cannot be translated in SQL because they may not have a standard SQL for it.
For example, control structure like IF THEN ELSE cannot be translated into SQL. It will always be evaluated
in Crystal Reports. But if you use an IF THEN ELSE on a parameter, it will convert the result of the condition to
SQL, but as soon as uses database fileds in the conditions it will not be translated in SQL.
2. How many subreports the report contains and in section section they are located.
Minimise the number of subreports used, or avoid using subreports if possible because
subreports are reports within a report, and if you have a subreport in a details section, and the report returns 100
records, the subreport will be evaluated 100 times, so it will query the database 100 times. It is often the biggest
factor why a report takes a long time to preview.
3. How many records will be returned to the report.
Large number of records will slow down the preview of the reports. Ensure you only returns the necessary data on the report, by creating a Record Selection Formula, or basing your report off a Stored Procedure, or a Command Object that only returns the desired data set.
4. Do you use the special field "Page N of M", or "TotalPageCount"
When the special field "Page N of M" or "TotalPageCount" is used on a report, it will have to generate each page
of the report before it displays the first page, therfore it will take more time to display the first page of the report.
If you want to improve the speed of a report, remove the special field "Page N of M" or "Total Page Count" or formula that uses the function "TotalPageCount". If those aren't use when you view a report it only format the page requested. It won't format the whole report.
5. Link tables on indexed fields whenever possible.
6. Remove unused tables, unused formulas, unused running totals from the report.
7. Suppress unnecessary sections.
8. For summaries, use conditional formulas instead of running totals when possible.
9. Whenever possible, limit records through selection, not suppression.
10. Use SQL expressions to convert fields to be used in record selection instead of using formula functions.
For example, if you need to concatenate 2 fields together, instead of doing it in a formula, you can create a SQL Expression Field. It will concatenate the fields on the database server, instead of doing in Crystal Reports.
SQL Expression Fields are added to the SELECT clause of the SQL Query send to the database.
11. Using one command as the datasource can be faster if you returns only the desired data set. It can be faster if the SQL query written only return the desired data.
12. Perform grouping on server
This is only relevant if you only need to return the summary to your report but not the details. It will be faster as less data will be returned to the reports.
Regards,
Shweta

Grid installation: root.sh failed on the first node on Solaris cluster 4.1

Hi all,
I'm trying to install the Grid (11.2.0.3.0) on the 2 node-clusters (OSC 4.1).
When I run the root.sh on the first node, I got the out put as follow:
xha239080-root-5.11# root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
ORACLE_OWNER= oracle
ORACLE_HOME= /Grid/CRShome
Enter the full pathname of the local bin directory: [/usr/local/bin]:
/usr/local/bin is read only. Continue without copy (y/n) or retry (r)? [y]:
Warning: /usr/local/bin is read only. No files will be copied.
Creating /var/opt/oracle/oratab file...
Entries will be added to the /var/opt/oracle/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Using configuration parameter file: /Grid/CRShome/crs/install/crsconfig_params
Creating trace directory
User ignored Prerequisites during installation
OLR initialization - successful
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding Clusterware entries to inittab
CRS-2672: Attempting to start 'ora.mdnsd' on 'xha239080'
CRS-2676: Start of 'ora.mdnsd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'xha239080'
CRS-2676: Start of 'ora.gpnpd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2676: Start of 'ora.cssd' on 'xha239080' succeeded
ASM created and started successfully.
Disk Group DATA created successfully.
clscfg: -install mode specified
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
CRS-4256: Updating the profile
Successful addition of voting disk 9cdb938773bc4f16bf332edac499fd06.
Successful addition of voting disk 842907db11f74f59bf65247138d6e8f5.
Successful addition of voting disk 748852d2a5c84f72bfcd50d60f65654d.
Successfully replaced voting disk group with +DATA.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
## STATE File Universal Id File Name Disk group
1. ONLINE 9cdb938773bc4f16bf332edac499fd06 (/dev/did/rdsk/d10s6) [DATA]
2. ONLINE 842907db11f74f59bf65247138d6e8f5 (/dev/did/rdsk/d8s6) [DATA]
3. ONLINE 748852d2a5c84f72bfcd50d60f65654d (/dev/did/rdsk/d9s6) [DATA]
Located 3 voting disk(s).
Start of resource "ora.cssd" failed
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'xha239080'
CRS-2672: Attempting to start 'ora.gipcd' on 'xha239080'
CRS-2676: Start of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-2676: Start of 'ora.gipcd' on 'xha239080' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'xha239080'
CRS-2672: Attempting to start 'ora.diskmon' on 'xha239080'
CRS-2676: Start of 'ora.diskmon' on 'xha239080' succeeded
CRS-2674: Start of 'ora.cssd' on 'xha239080' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'xha239080'
CRS-2681: Clean of 'ora.cssd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'xha239080'
CRS-2677: Stop of 'ora.gipcd' on 'xha239080' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'xha239080'
CRS-2677: Stop of 'ora.cssdmonitor' on 'xha239080' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
Failed to start Oracle Grid Infrastructure stack
Failed to start Cluster Synchorinisation Service in clustered mode at /Grid/CRShome/crs/install/crsconfig_lib.pm line 1211.
/Grid/CRShome/perl/bin/perl -I/Grid/CRShome/perl/lib -I/Grid/CRShome/crs/install /Grid/CRShome/crs/install/rootcrs.pl execution failed
xha239080-root-5.11# history
checking the ocssd.log, I see some thing as follow:
2013-09-16 18:46:24.238: [    CSSD][1]clssscmain: Starting CSS daemon, version 11.2.0.3.0, in (clustered) mode with uniqueness value 1379371584
2013-09-16 18:46:24.239: [    CSSD][1]clssscmain: Environment is production
2013-09-16 18:46:24.239: [    CSSD][1]clssscmain: Core file size limit extended
2013-09-16 18:46:24.248: [    CSSD][1]clssscmain: GIPCHA down 1
2013-09-16 18:46:24.249: [    CSSD][1]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
2013-09-16 18:46:24.250: [    CSSD][1]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
2013-09-16 18:46:24.250: [    CSSD][1]clssscExtendLimits: The current soft limit for locked memory is 4294967293, hard limit is 4294967293
2013-09-16 18:46:24.250: [    CSSD][1]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
2013-09-16 18:46:24.250: [    CSSD][1]clssscSetPrivEnv: Setting priority to 4
2013-09-16 18:46:24.253: [    CSSD][1]clssscSetPrivEnv: unable to set priority to 4
2013-09-16 18:46:24.253: [    CSSD][1]SLOS: cat=-2, opn=scls_mem_lockdown, dep=11, loc=mlockall
unable to lock memory
2013-09-16 18:46:24.253: [    CSSD][1](:CSSSC00011:)clssscExit: A fatal error occurred during initialization
Do anyone have any idea what going on and how can I fix it ?

Hi,
solaris has several issues with DISM, e.g.:
Solaris 10 and Solaris 11 Shared Memory Locking May Fail (Doc ID 1590151.1)
Sounds like Solaris Cluster has a similar bug. A "workaround" is to reboot the (cluster) zone, that "fixes" the mlock error. This bug was introduced with updates in september, atleast to our environment (Solaris 11.1). Prior i did not have the issue and now i have to restart the entire zone, whenever i stop crs.
With 11.2.0.3 the root.sh script can be rerun without prior cleaning up, so you should be able to continue installation at that point after the reboot. After the root.sh completes some configuration assistants need to be run, to complete the installation. You need to execute this manually as you wipe your oui session
Kind Regards
Thomas

How to display the content of a BLOB column in a ADF/BC pages ?

How to display the content of a BLOB column in a ADF/BC pages ?
There is some image in database table blog column. And we want to display image on the screeen.
There is some example about upload and dowload blog columns.
(steve not yet document example page etc...)
But We want to display blog picture in a image component...
is there any basic way to do it ?
Thanks a lot...

Ali,
You could just download the sample app... but... here is the servlet code from the demo (look at it just for technique - you'll obviously have to change it for your needs)...
John
package oracle.fodemo.storefront.servlet;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.servlet.*;
import javax.servlet.http.*;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import oracle.jbo.domain.DBSequence;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ViewObjectImpl;
public class ImageServlet
extends HttpServlet
private static final String CONTENT_TYPE =
    "image/jpg; charset=windows-1252";
public void init(ServletConfig config)
    throws ServletException
    super.init(config);
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType(CONTENT_TYPE);
    response.setContentType(CONTENT_TYPE);
    String detailProductId = request.getParameter("detail");
    String thumbnailProductId = request.getParameter("thumbnail");
    boolean thumbnail = true;
    String productId = null;
    OutputStream os = response.getOutputStream();
    String amDef = "oracle.fodemo.storefront.store.service.StoreServiceAM";
    String config = "StoreServiceAMLocal";
    ApplicationModule am =
      Configuration.createRootApplicationModule(amDef, config);
    ViewObjectImpl vo =
      (ViewObjectImpl) am.findViewObject("ProductImages"); // get view object (the same as used in the table)
    if (detailProductId != null)
      productId = detailProductId;
      thumbnail = false;
    else
      productId = thumbnailProductId;
    vo.defineNamedWhereClauseParam("paramThumbnail", null, null);
    vo.defineNamedWhereClauseParam("paramProductId", null, null);
    vo.setWhereClause("DEFAULT_VIEW_FLAG = :paramThumbnail AND PRODUCT_ID = :paramProductId");
    vo.setNamedWhereClauseParam("paramThumbnail", (thumbnail? "Y": "N"));
    vo.setNamedWhereClauseParam("paramProductId", productId);
    vo.executeQuery();
    Row product = vo.first();
    BlobDomain image = (BlobDomain) product.getAttribute("Image");
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[10 * 1024];
    int nread;
    while ((nread = is.read(buffer)) != -1)
      os.write(buffer, 0, nread);
    os.close();
    vo.setWhereClause(null);
    vo.removeNamedWhereClauseParam("paramProductId");
    vo.removeNamedWhereClauseParam("paramThumbnail");
    Configuration.releaseRootApplicationModule(am, false);
}

UITextView doesn't display the first part of the text

I am having a trouble with UITextView.
When a text view is loaded for the first time after my app is launched (the text view is created and text is filled from saved data), the text view displays from the first letter of the text.
But once the text view becomes first responder, then disappers by pressing back button on a navigation bar, and come back to the text view again by using a control on the previous view (a button for instance), the text view always displays the last part of the text.
This happens after the text view becomes first responder. What is changed before and after the text view becomes first responder? And how can I avoid this to display the first letter in the text view always when it appears?
I tried resignFirstResponder, selectedRange, and scrollRangeToVisible: in viewWill/DidAppear/Disappear but all of them didn't work.

Thank you iPhil_good, but it didn't work ...
And RickMaddy, I don't know how to post image but as it is UITextView, I use text to explain.
There are two views, home view and text view, and UITextView is in the text view. The first time the UITextView appears (slides in from the home view), it looks like:
Test[1] Test[2] Test[3] Test[4]
Test[5] Test[6] Test[7] Test[8]
Test[9] Test[10] Test[11] Test[12]
Suppose the text starts at Test[1] and ends at Test[200], and just the first 50 are visible within the size of the UITextView.
Once I tap on the UITextView, keyboard appears and UITextView becomes first responder (editable). Then I go back to the home view using back button on the navigation bar.
Then again I move back to the text view from the home view,. This time it looks like:
Test[189] Test[190] Test[191] Test[192]
Test[193] Test[194] Test[195] Test[196]
Test[197] Test[198] Test[199] Test[200]
I would like to display the text from Test[1] whenever the view appears. If the UITextView hasn't become first responder, this doesn't happen and the text starts from Test[1] when it appears. But once the UITextView becomes first responder, the UITextView always displays Test[200] at the bottom of the view when it appears.
I am not sure but it looks as though some internal state of UITextView changes when it becomes first responder, but isn't reset even after it resigns first responder.

How to display the Form output in multiple languages ? ------ Urgent

How to display the Form output in multiple languages ? -
Urgent

Hi,
Do u mean the Form output in 2-3 languages ...like form output will be having english russian etc...
for the above case , what u have to do ...
first have to get the transalations for all the fields
say for example : if the english word is PO Number , then u have to get the transalation text for PO Number :
after this , what u have to is ,,, Log on to SAP with russian language , then in the form o/p u have to paste that russian test ( translation text ) ...
do like this for all the components in the form .
Reward Points if it is Useful.
Thanks,
Manjunath MS

How to include the first row of detail in every xquery transformed xml?

I am dealing with a XML file,where i need to publish to different BS.
First node will be a common node node which contains vital info,second node goes to one BS and third goes to another BS.
*<header></header>*
*<details></details> (they are unbounded, but the first detail tag which comes in the input file is a mandatory tag in such a way that it needs to be included in every transformed message)*
*<trailer></trailer>*
We need to apply x query transformation on it in such a way:
*</header></header>*
*<1st detail></1st detail>*
*<detail></detail> (2nd row of detail in input file)* -------------------------> Goes to BS1
*<trailer></trailer>..*
*<header></header>*
*<1st detail></1st detail>*
*<detail></detail> (3rd row of detail in input file)* ----------------------------->Goes to BS2
*<trailer></trailer>*..
And so on.
Now, the problem is how to include the first row( *1st detail* ) of detail in every xquery transformed xml?

are you looping of this input with a for each?
/yourdata/details[1] should return always the first detail element.
or before the for each do an assing of this first detail element to "generic_details_var"
and use this var in every looping iteration (in an assign or as input for xquery)

How to display the first node in a nested folder?

Similar Messages

Maybe you are looking for