How to display the first page alone first and two pages (back and front) then ?
Hi
I use acrobat 9 (beginner).
I have a document which should be displayed "as a book", ie two pages on the screen at the same time, the back of the first sheet and the front of the second one.
The problem I have is to manage to display the cover sheet as a single page (alone) and then to have the dual page layout as described above.
How could I do that ?
Thanks for your help
Regards
Fanch
Hi Bernd
Thanks a lot.
Similar Messages
-
How can I display the first and last name using a paramater as employee ID?
Hi SAP,
I have a parameter that is called {? Employee ID}. What I want to do is display the first and last name based on the employee ID value entered in {? Employee ID} in the page header of the report. Right now, when I put the following formula in the page header only some pages get the right result while other pages dont....
if table.employeeid = {? Employee ID} then
table.firstname" "table.lastname
It appears as though if the first record in the details section on the beginning of each page happens to be the employee under {? Employee ID} then it prints it correctly, if it isn't I get a null value in the page header.
Anyone have any ideas?
ZHi Try this,
Whileprintingrecords;
if ={?EmpID} then
Also check the option "Default values for null" in the formula editor.
Regards,
Vinay -
How to view the first and the last frame of a clip or a selected range in the time line?
How to view the first and the last frame of a clip directly or in a selected range in the time line ? Up arrow and down arrow keys changes only between the first frame of the consecutive clips. Even ; and ' does the same. I mean what is the shortcut keys for first to last and last to first frame of a clip? Help please.
SELECT PurOrderNum,
OrderDate
FROM
SELECT PurOrderNum,
OrderDate,
MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'
)t
WHERE OrderDate = MaxDate
OR OrderDate = MinDate
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How to show the First and Last name of the user instead of user name
Gurus,
We have the full email id of the user as the portal user name. Right now we are using the "Item Attributes - Current User" to show the user name. We don't want to show this anymore. We would like to show the First and Last name of the user on the Portal page. How can i do this. Please post a reply if you have some idea about it.
Thanks
Raj
---------I believe this is possible using the security APIs. See http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/PLSQL/DOC/PLDOC_9026/INDEX.HTML and look for person_info (Returns user information, given a user name)
under wwsec_api
Suggest posting any follow-up questions to the Security forum - http://forums.oracle.com/forums/forum.jsp?forum=6 -
How to get the first and the last record of every month within a time range in sql
I am trying to get the first record and the last record of each and every month in a given date range using sql. I have a sample code
where i have just selected everything within the date range now i have to extract the first and the last records of each and every month.
SELECT PurOrderNum,
OrderDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'SELECT PurOrderNum,
OrderDate
FROM
SELECT PurOrderNum,
OrderDate,
MAX(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MaxDate,
MIN(OrderDate) OVER (PARTITION BY DATEDIFF(mm,0,OrderDate)) AS MinDate
FROM Purchasing.PurOrder
WHERE OrderDate >= '2013-02-28'
AND OrderDate <= '2014-12-29'
)t
WHERE OrderDate = MaxDate
OR OrderDate = MinDate
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
How to get the first and second quarter from CRT
Dear Freinds,
I have one scenario , the Functional SPEC says Read the payroll results and from the CRT get all the 4 quaters
for the wage type /5UH and sum them and then pass on the to field in the main strucutre.
Iam using the FM HR_GET_PAYROLL_RESULTS
CALL FUNCTION 'HR_GET_PAYROLL_RESULTS'
EXPORTING
pernr = fp_v_pernr
permo = fp_v_permo
pabrj = fp_v_pabrj
pabrp = fp_v_pabrp
actual = 'A'
TABLES
result_tab = i_payresult
EXCEPTIONS
no_results = 1
error_in_currency_conversion = 2
t500l_entry_not_found = 3
period_mismatch_error = 4
t549q_entry_not_found = 5
internal_error = 6
wrong_structure_of_result_tab = 7
OTHERS = 8.
Iam collecting all the Actual Result (current result) values
on the selection screen iam passing for month april (04 2008)
so this falls in the second quater .
the internal table i_payresult is picking up only the second quater (01-04-2008 to 30/04/2008 ) ,but since on the selection screen iam pasing as other period (04 2008) the internal table i_payresult returing from the FM (HR_GET_PAYROLL_RESULTS) only picks the second quater,
could any one let meknow how i can pick up the first quarter as well and add the first and second quater to mee the requirement .
Please help me in this regard
Thanks & regards
maduriHi Manoj,
Thank you for giving me idea for going further regarding this problem , so my final question for this is
as per FS they said they are going to enter the payroll
area and the other selection as 04 2008
In order to achieve the first quarter , because 04 2008 means they are going to enter for the second quarter , the payroll results will come only for second quarter and not for the first quater , if they want to sum all the two quarters then they shouldnt pass on the selection screen the dates as 04 2008, instead they has to pas
01 01 2008 to 30 06 2008 , as there is no point in they passing as 04 2008 as we are going to consider from 01 2008 to 062008 . Please correst me if am correct regarding the dates passing on teh selection screen
or if the user enters on theslection screen still enter 04 2008 and will be able to acheive the first quarter ??
Please answer me this point before i can change the logic of the code and tell to my FO regarding this point.
thanks & regards
Madhuri -
How to display the HTML pages in RRC/RQM dashboard using OpenSocial gadget
Hi,
I have a requirement as below:
1. I have couple of HTML pages which are hosted in the sharepoint site and I would like to display the HTML pages
2. I would like to have an OpenSocial gadget in the RRC/RQM dashboard that will display the HTML pages which are hosted in my sharepoint site.
Could you please suggest the best approach to create an OpenSocial gadget in the IBM's RRC/RQM dashboard whcih will display html contents of another URL ?
Thanks.
Knowledge is power.Hi Manoj,
As I understand, you would like to display SharePoint page in another platform.
Since the you are involving third party platform, you might still need to contact their support engineer about how to render other pages.
From SharePoint side, by default, SharePoint won't let end user to display site page to other platform, you could add "<WebPartPages:AllowFraming runat="server"/>" in master page or single page layout. So that SharePoint ASP.Net
page could be displayed on other platform.
Here I'm talking about ASP.Net page, since HTML page in SharePoint cannot be displayed in browser as I tested, it will be downloaded directly. So I'd suggest you use ASP.Net page as workaround.
https://social.msdn.microsoft.com/Forums/office/en-US/c8755a6b-f33a-43ed-97d9-8f03c336aa1d/how-to-display-sharepoint-url-in-iframe-in-aspnet-page?forum=sharepointdevelopment
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
How to get the first and last record
Hai All
I have table called T1 and there are more than 8 lakhs records and i have a column called Timestamp so i need to get the first record value and time stampvalue and last record and time stamp value so that i can conclude that For Example
form 13 june to 15 june data are here
Kind Regards
SrikkanthMSomething like this can also indicate the first and last rows as you query...
SQL> select empno, ename, hiredate
2 ,case row_number() over (order by hiredate)
3 when 1 then 'First Row'
4 when count(*) over () then 'Last Row'
5 end as flag
6 from emp;
EMPNO ENAME HIREDATE FLAG
7369 SMITH 17/12/1980 00:00:00 First Row
7499 ALLEN 20/02/1981 00:00:00
7521 WARD 22/02/1981 00:00:00
7566 JONES 02/04/1981 00:00:00
7698 BLAKE 01/05/1981 00:00:00
7782 CLARK 09/06/1981 00:00:00
7844 TURNER 08/09/1981 00:00:00
7654 MARTIN 28/09/1981 00:00:00
7839 KING 17/11/1981 00:00:00
7900 JAMES 03/12/1981 00:00:00
7902 FORD 03/12/1981 00:00:00
7934 MILLER 23/01/1982 00:00:00
7788 SCOTT 19/04/1987 00:00:00
7876 ADAMS 23/05/1987 00:00:00 Last Row
14 rows selected.
SQL> -
How to display the first node in a nested folder?
If my navigation structure has nested folders and the first page node is in a nested folder. Is it possible to have user click the outer folder and the first node displayed in the content area?
Hi there,
please refer to the document "Installing Patch 4 for Enterprise Portal 6.0 SP2" (EP6SP2Patch4_install_v5.pdf) to be found on Service Marketplace; there: "6.3 Navigation Enhancements", there: "6.3.2 Default Entry for Folder" & "6.3.4 DTN: Clicking Folder Name Launches First Node".
This should answer your question if you think about nesting with one level (I don't think it works over more levels, imagin Folder A only with subfolders, for instance Folder AA with a page AAA under it. Clicking on A will not open AAA, I think, even if this is the first "displayable" element; but I didn't check it out).
Hope it helps
Detlev -
How to compare the first and last characters of strings?
lets say we have a name column with values;
c1
Antu Anamentu
Steven Smith
Since A=A and U=U for the first value we need a TRUE and FALSE for the second value SQL. Is this possible to do with REGEXP functions on 10gR2.
Thank you.Hi Frank,
Just minor correction: REGEXP_LIKE (Name1, '^(.).*(.) \1.*\2$') ;
Explanation: ^(.) =>^ specifies the next char is first char
. dot specifies single character
() defines group which can be backrferenced
.* => Any number of characters as we want only first and last character
(.) => (.)space The space signifies that we want to remember last char of first word or char before space
\1 => It recalls first group which we saved for backreference using (.)
.* => Any number of chars
\2 => It recalls first group which we saved for backreference using (.)
$ => It specifies the char before this is last charHope it clarifies :)
SQL> WITH t AS
SELECT 'Antu Anamentu' Name1 FROM DUAL UNION ALL
SELECT 'Steven Smith' Name1 FROM DUAL
SELECT Name1
FROM t
WHERE REGEXP_LIKE (Name1, '^(.).*(.) \1.*\2$') ;
NAME1
Antu Anamentu -
How we claculate the first and last date of the month
hi,
I have a requirement, if i have the any date of a month like today date 02/13/2008. So i want the first date of this month and the last date of this month.
Is there any FM for this..or if you have nay prorgam pls send to me.
thanks.Hi Vipin,
Try
HR_JP_MONTH_BEGIN_END_DATE FM will return both first day and last day
LAST_DAY_OF_MONTHS for getting last day of month.
Reward if helpful.
Regards,
Mandeep -
Hi,
Please help on how to achive the subjected... ThanksHi,
You have to explain your problem clearly with as much details as possible including the version of the SQL you are using so that everyone here can understand. From the title of your post it looks like that you want to change the color of the data series
marker (the dot in the picture above) in a SSRS chart.
If I have understood you correctly then here is how you can do it.
1. Select the data series properties. Select and right click on the line in the chart in design mode. Then click on "Series Properties" and go to the properties tab for "Markers". Under "Marker Color" drop down select the expression
and set the expression as shown in the picture. Replace "Field!Qty.Value" with appropriate field and the criteria for the upper and lower bound you want with their respective color.
2. You can see in the snapshot below that the color of January Month has changed to Red since the qty value is less than 300 as set in the expression above.
--sIbu -
How to display the color of time period and the legend in Calendar view?
Hi,
Sorry to disturb you guys with a quite simple question.
I want to do a calendar view to display the period of absence for the portal user. I've setup the iView but it displays neither the color of time period nor the legend.
The problem is:
1) If I test with <i>static legend</i> (that is, I input the time period directly in the form instead of using data service),
a) I could only define <b>one</b> time period, because it's impossible to map the <i>out</i> port of calendar to <i>in</i> port of form on defining the event as 'goto'.
b) I can't see the color displayd while deploying although there is just one time period! Neither the legend. I' ve given the label and color of the legend and assigned the action as default in design board. Why it doesn't work?
2) If I test with <i>dynamic legend</i> following the chapter "<i>Display Date on a Calendar</i>" in the <i>Modeler's Guide</i> of VC;
I assigned @RECORDNR to 'ID legend field', and used BAPI_ABSENCE_GETLIST as dynamic legend data service to edit the legend, and assigned the color for every ID. But neither color nor legend could kindly appear. What's the problem? Is there any error in the edit of entry list of the legend?
Please help me! Thanks!!!Is there any advice?
I'll greatly appreciate your help! -
How to display the rows in to columns and columns into rows?
DES:- I know by using pivot and unpivot you can convert rows into columns and columns into rows but i don't know how to write the syntax?
Hi,
Besides the places Martin mentioned above, there are many examples in the forum FAQ:
https://community.oracle.com/message/9362005#9362005
For an example of both PIVOT and UNPIVOT in the same query, see
http://forums.oracle.com/forums/thread.jspa?threadID=920854&tstart=0 -
How to display the descriptions of a "question" and "answers" in the LMS?
Hello, evevyone,
I am new comer in Captivate 5.
In order to analysis the result of "Learner response", we need known the “Question” and “Answer” description of each Quiz in a SCORM player.
Does Captivate return these information back to LMS?
For example :
I have created a quiz with one question.
Do you have a dog? ------->Question description
(A)Yes ----->Learner response
(B)No
After complete the quiz on LMS, Captivate will return the "Do you have a dog?" and "(A)Yes" back to LMS ?Dear RodWard,
I am trying anohter LMS named SCORM Cloud.
The question description does not return to LMS.
You can see the Message Log:
cmi.interactions.3
cmi.interactions.3.id: 1272
cmi.interactions.3.type: LongFillIn
cmi.interactions.3.timestamp: 2011-09-29T21:01:43
cmi.interactions.3.correct_responses.0.pattern: aa
cmi.interactions.3.weighting: 10
cmi.interactions.3.learner_response: aa
cmi.interactions.3.result: correct
cmi.interactions.3.latency: 0000:00:02
cmi.interactions.3.description: <--------------No description
I am sure that Captivate will not return the question description.....
Am I right?
Maybe you are looking for
-
Issue with Japanese characters in files/filenames in terminal.
I recently downloaded a zip file with Japanese characters in the archive and in the files within the archive. The name of the archive is "[批量下载]パノプティコン労働歌 第一等.zip" The characters are properly displayed in firefox, chrome, and other applications, but
-
Location of pictures on Hard Drive
I have been having some issues when syncing iPod with computer. No pictures are transfered. In the process of fixing the issue, I came to the realization that pictures that I had erased from iPhoto are still in the hard drive! and also that those tha
-
HI community. I bought a Zen V MP# player. I lost my installer cd, and then I can't connect my player to a PC. I have win XP SP2, I downloaded everything, Mediasourse, play for sure, nothing works. When I connect the player, my windows says MTP devic
-
I just upgraded to the latest version of Presentation Director on a T61 and now I get the following message when I try to start the program: "Presentation Director detected the Lenovo USB Port Replicator with video. Please push the button on the fro
-
Business Event Imparts with Skills (GAP UPDATE)
Dear Experts, If the Business Event Imparts with Skill; does skill gets automatically updated once course attended by an employee? If <b>YES</b> please explain what is required to be done to achieve this. Thanks in advance for all your efforts & I