How to display the Hierarchy Node Level in BEx

Hi Folks,
In my report I have a Hierarchy. I have to display the Node level of the Hierarchy in the output.
For Eg:
         If I have BB under AA root node then in the output it should display Level 1 for AA and Level 2 for BB.
Thanks in Advance.
Regards,
Srikanth N

I don't think it is possble to display the hierarchy level in the report itself.
However, if you go to properties of the characteristic where you have the hierarchy defined, there you can expand the hierarchy to a pre-defined level...I guess you know that.
AT

Similar Messages

  • How to display the value of  level axis in a scattered graph

    hi All,
    I have created a scatterd graph and i am able to show the X-axis and Y-axis values as tool tip. my requirement is to display the value of level axis also within the tool tip.
    please help me to configure the value of level axis as tooltip.
    thanks in advance

    Hi,
    Thanks for the reply. i was able to configure the tool tip for X and Y axis, but i was not able to shoe the third or level axis value in the tool tip.
    please help me in configuring the third or level axis value in tool tip.
    thanks in advance.

  • How to display a Hierarchy node for level 2 without parent and description

    Hi,
    How to display a node at level two at the query the first node is CLASS where hierarchy is maintained and the second node is
    subclass where hierarchy is not maintained, Now I want to display the subclass in the row where it has to display its child node in one column & text in the other.

    Hi,
    I dont think this would be feasible to display in different columns.
    -Vikram

  • How to display the first node in a nested folder?

    If my navigation structure has nested folders and the first page node is in a nested folder. Is it possible to have user click the outer folder and the first node displayed in the content area?

    Hi there,
    please refer to the document "Installing Patch 4 for Enterprise Portal 6.0 SP2" (EP6SP2Patch4_install_v5.pdf) to be found on Service Marketplace; there: "6.3 Navigation Enhancements", there: "6.3.2 Default Entry for Folder" & "6.3.4 DTN: Clicking Folder Name Launches First Node".
    This should answer your question if you think about nesting with one level (I don't think it works over more levels, imagin Folder A only with subfolders, for instance Folder AA with a page AAA under it. Clicking on A will not open AAA, I think, even if this is the first "displayable" element; but I didn't check it out).
    Hope it helps
    Detlev

  • How to display the tree nodes distinctivly.

    Hay all,
    Frnds , i am facing a problem. I have created a tree whose each node consisted of a checkbox and a label. For that i have used DefaultMutableTreeNodes for tree nodes and a TreeCellRenderer. Is there any method or way to display some nodes distinctively(may be in different color or something else). Plz tell me soon its very urgent.

    Hi Jürgen,
    See http://help.sap.com/saphelp_nw04/helpdata/en/44/6aaf92f5a23672e10000000a114a6b/frameset.htm
    Only Worksets and Roles are not described, anyhow, doing a bit research via decompiling or just by searching on SDN will bring you the needed extra info; just as an example for roles access: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401
    Hope it helps
    Detlev

  • How to display the Hierarchy of a TestStand architecture similar to using the LabVIEW "show VI Hierarchy"?

    I and my customers have used the Tools -> Sequence File Documentation feature, but having utilized the VI Hierarchy as an architecting tool for large projects, our expectations exceed the present Sequence File Documentation abilities. A more graphical, branching like view would be very helpful.

    You suggestion is appreciated and has been added to the suggestion list for potential features of future TestStand versions.

  • Display of Hierarchy Nodes as Medium Text in Web Report

    Hello everyone,
    Does anybody know how to display the hierarchy nodes as medium text instead of short text (default) in web report?
    I know it is possible to change the display setting directly (by right clicking on hierarchy node > properties) from the web report.
    However, I would love to know if there is any other way to change the settings such as through Query designer or Hierarchy maintenance in SAP GUI so that users do not need to change the display settings every time they view the web report.
    Your help is kindly appreciated.

    Thank you Shabar for you quick reply.
    What if a Hierarchy is created under an InfoObject? How can I change the Text view of each name of the Hierarchy nodes?
    In Query Designer, I tried to change the Text View to Long but it only affects the text of the InfoObject but not the Hierarchy nodes.
    I tried the 2nd suggestion too.  I only can find the BEx description for the InfoObject but not the Hierarchy nodes.
    It would be great if anyone could tell me how to do so.
    Thanks in advance.

  • How to expand the hierarchy column automatically when delivery reports by a

    Hi Experts,
    In OBIEE 11.1.1.6.0,how to expand the hierarchy column automatically when delivery reports by agent?
    For example:
    In SampleLite RPD, when we drag "Time Hierarchy" and Sales column into the report , and sent it by agent ,it will only display "Total" sales, not show all level value,such as Year,Month,Day.So how to expand the hierarchy column automatically when delivery reports by agent?
    If we expand all levels and save them, it will be ok, however, when we add new data, it will be collpased automatically and not show the lowest level data, requiring Users or Developer to modify this report for expanding the hierarchy. We think it is very trouble, is there any good suggestion or method for achieving our requirement?

    958054 wrote:
    Hi Dpka,
    Is it any difference? I look at the result is same.
    Firstly, you said it is 'Add member of ',
    Now, you said it is 'Keep member of'
    Could you please tell me which options I must select ? Thanks very much.Here is some notes from the documentation to make a better sense of how those two options would work:
    •Selection steps — When you create selection steps, you can add a group or a calculated item in a step. Subsequent Keep Only or Remove steps might reference members that were included in the group or calculated item.
    ◦A group list is affected by members that are kept or removed in subsequent steps, but the group outline value remains the same. For example, suppose the MyNewYork group contains Albany and Buffalo and its value is 100. Suppose Albany is removed in a later step. The value of the MyNewYork group remains at 100, but Albany is no longer listed with the group.
    ◦A calculated item is not affected by members that are kept or removed in subsequent steps, because removals can affect the components of the formula.
    •Groups and calculated items — A step can include a group or calculated item. Groups and calculated items can be used only with Add steps; they cannot be used in Keep Only or Remove steps.

  • How to get the hierarchy in update rules

    i want to update the material hierarchy to the open hub data file
    i create a update rule(transformation)
    and i want to get the node name at the last level of the hierarchy tree above the material level
    how can i do this?

    no
    for example
    now we have maintain the hierarchy of material like this:
    026（level 1)
    -026/100（level 2)
    -026/200（level 2)
         |-026/20010（level 3)
         |---800501234（level 4)
    in this hierarchy tree,the material 800501234 is in the level 4
    and i want to get the last level hierarchy node above the material
    for 800501234,the hierarchy node is 026/20010
    so
    i want to export the data like this:
    hierarchy id      |        material
    026/20010        |        800501234
    how can i do this?
    Edited by: Yang Zelphar on Mar 25, 2009 5:03 AM
    Edited by: Yang Zelphar on Mar 25, 2009 5:04 AM

  • How to remove xmlns in node level

    Hi Experts!
    How to remove xmlns in node level in response xml file. I tried to use AF_Modules/XMLAnonymizerBean, but it did not work.
    Can you please help me out on this.
    I want to remvoe  xmlns tag in LEVICOM
    Eg:
    - <Addenda>
       - <LEVICOM xmlns="">
    Thanks,
    Hari

    Hi Expers!
    Please help me out on this. The below xslt mapping working only to remove xmlns prefix in xml file, if parent having only one child. This code is not working if parent having multiple childs.
    Eg:  <parent>
               <phild  xmlns="">
                 test1
                </phild>
            </parent>
    The above example working fine with below xslt mapping to remove xmlns tag.
    Second scenarion  not working
    Eg:  <parent>
              <child1  xmlns="">
                 test1
              </child1>
              <child2  xmlns="">
                  test2
               </child2>
            </parent>
    The above example is not working.
    Here is the code:
    You can remove the namespace prefixes using an XSLT mapping if they are causing problems with applications outside of XI.
    Try the following code:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
    xmlns="http://www.arconw.com/XI/XSLT_Library/XmlNamespacePrefixRemoval"
    version="1.0">
    <xsl:output method = "xml" />
    <xsl:template match="/">
    <xsl:apply-templates select="*" mode="remprefix"/>
    </xsl:template>
    <xsl:template match="*" mode="remprefix">
    <xsl:variable name="newname" select="local-name(.)"/>
    <xsl:element name="{$newname}" namespace ="{namespace-uri()}">
    <xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
    <xsl:apply-templates select="*" mode="remprefix"/>
    </xsl:element>
    </xsl:template>
    <xsl:template mode="copyall" match="@*|comment()|processing-instruction()|text()">
    <xsl:copy>
    <xsl:apply-templates mode="copyall" select="@*|comment()|processing-instruction()|text()"/>
    </xsl:copy>
    </xsl:template>
    </xsl:stylesheet>
    Thanks,
    Hari

  • How to display the result of  excutions(insert/update/delete rows)

    Hello.
    Does anyone know how to display the result of scenario executions just like a scenario executions tab of package (insert/update/delete rows) in other screen (in the intergated operating platform for operators using http)
    In additional, I also like to show the hierarchy of scenario in the same view.
    So, I need the query using the information of the ODI repository.
    If it is possible, I also like to have the decription of the tables in the ODI repository.
    Can anyone tell me how can I get the information of the counts of excution?
    Thanks in advance.

    Hi,
    You can get that information from the API getPrevStepLog. Does it work for you?
    Download the last API reference manual from:
    http://www.oracle.com/technology/products/oracle-data-integrator/10.1.3/htdocs/1013_support.html#docs

  • How to understand the hierarchy structure of 0PLANT io?

    how to understand the hierarchy structure of 0PLANT io ?
    i can understand the hierarchy structure of PRODUCT io,
    well, i hope someone could explain the hierarchy structure of 0PLANT io
    thanks.

    Hi
    You can use following hierarchy tables
    RSTHIERNODE - Texts of Non-Postable Hierarchy Nodes
    RSEHIERNODE - Master Data: Hierarchy Nodes that Cannot Be Posted To
    RSMHIERNODE - Master data: Hierarchy nodes that cannot be posted to
    RSHIEDIR - Hierarchy Catalog
    RSHIEDIRT - Hierarchy directory texts
    RSREQHIER - Data Request hierarchy
    RSROLEHIERARCHY - Role hierarchy
    In addition to these have a look at K table & I table for 0PLANT.
    K table - Hierarchy SID table
    I table - Hierarchy structure table
    Hope this will help..!!
    Thanks,
    Vikrant

  • In sap scripts how to display the driver program

    Hi,
        I Want to know the sap scripts How to display the output to driver program

    Hi,
    Go to NACE Transaction.
    Select application for ex: if sales V1.
    Click on output types.
    Select the output type for ex : BA00
    Double click on Processing routines.
    There you can find the Driver Program name and Script/smart form name.
    Reward if useful.
    Thanks,
    Raju

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

  • How to display the header data on different position in alv report

    hi all,
    how to display the header data on different position in alv report.
    for example ,
    customer                                                   name
      xxxx                                                         xxxx
                     vendor        name     street 
                      xxxx         xxxx      xxxxx
    pls   help me .

    hi
    as per my understanding you need to trnasfer header internal table data  to pdf..
    please check the following links for internal table to pdf..
    Convertion of Internal table data to PDF
    This link is related to ur issue
    Re: how to insert the calling of the FM: OTF to PDF
    Thanks

Maybe you are looking for