How to display the index of current desktop when enable multiple spaces

I was using 10.6 before and used to using Spaces and puts applications into different desktops.
Now I'm using 10.8 and I know that the Spaces has been integrated into Mission Control.
The problem is, I can see the current desktop on the top bar in 10.6, but in 10.8 I cannot see it so I usually forget where I am.
Does anyone know how to display the index of current desktop?

Does anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie

Similar Messages

How to display the details of particular order when click on button in sapui5

Hi Experts,
How to display the details of particular order when click on button in sapui5?
I Have a requirement that is i want display all the list of orders coming from backend as shown in image below
then in that i have a button when i press the button it need to display the details of particular order as shown in image below
Please help me .
Thanks & Regards
chitti

Does anyone know how to display the index of current desktop?
Brute force - - I have written the number of the Desktop directly onto the wallpaper picture I am using for each Desktop (easy to do with Preview).
All Desktops are using different wallpaper photos, so they are easily recognized by the color scheme, and in the upper left corner is the number.
Regards
Léonie

How to display the username and current date in OAF page Footer region

Hi,
I need to display the username and Current-Date in footer region.If anybody knows the procedure then please share with me.
Thanks
Divya Agarwal

Hi,
Read this Thread:--
You have to capture the UserName and Date in the Process Request Method of page Controller and invoke a method which will subsequently get and set the value in some attribute.
String userName = pageContext.getUserName();
How to populate Current Date and Time in OAF page through CO
Thanks
--Anil

How to display the index generated by TREX?

We have a need to display the indexes generate by TREX for SM7.0 KM and EP7.0 KM.
Please help tell how to do it?
Thanks a lot!

Hi Ashley jo,
Well, the above would not help in OS level.
The Design is, TREX always stores the indexed pointers to the actual data in it's database rather OS level.
But at OS level, you can find details about how TREX has been configured and managed.
The typical path would be <Drive>:\usr\sap\<SID>\TRX<Instance number>\<Host name>
In this path, you find all *.ini files which contains the configuration details apart from regular 'work', 'log', 'trace' directories.
Regards
Sekhar

How to display the time length of video (current time/ total time) ?

Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.

Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
     at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
     at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
     at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
          AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
                                                        // technique
          48000.0F,// sampleRate the number of samples per second
          16, // sampleSizeInBits the number of bits in each sample
          2, // channels the number of channels (1 for mono, 2 for
                        // stereo, and so on)
          4, // frameSize the number of bytes in each frame
          48000.0F,// frameRate the number of frames per second
          false); // bigEndian indicates whether the data for a single
                        // sample is stored in big-endian byte order
                        // (false means little-endian)Can you please suggest where I am going wrong ?

How to display the current date in the prompt value.

Hi,
How to display the current date in the prompt value. When the user runs the query he want the current date to be displayed in the prompt value and he should also be able to change the date if required ...... I am using web Intellegency BO XI3.0.
Thanks,
Shakthi.

Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari

How to search the indexes in 11g Enterprise Manager Console

Hi,
After setting the Indexes using Java Embedding for a process, can you please tell me how to search the indexes in 11g Enterprise Manager Console for the particular process.In 10g BPEL Console we have the option of searching the Instances based on Indexes we already set at process level which is inbuilt in 10g. I need the same in 11g .
Thanks,
Sagar.

Hi Sagar,
You can define composite sensors in your composite.
Then you will get fields in enterprise manager of that composite instance.(the sensors you have defined will be displayed here)
You can enter the values based on what you want to search the instance. :)
Regards
PavanKumar.M

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display the page no in script

HI,
Can any one tell how to display the page no's as follows in Scripts.
current page/total no.of pages(ex:1/10)

Hi,
For Smartforms:
Just insert fields: &SFSY-PAGE& and &SFSY-FORMPAGES&.
Page: &SFSY-PAGE& of &SFSY-FORMPAGES&
For Sapscript:
Just add: &PAGE& and &SAPSCRIPT-FORMPAGES&
Page: &PAGE& of &SAPSCRIPT-FORMPAGES&
Regards,
Edited by: Jatra Riwayanto on Jun 4, 2008 9:33 AM
Edited by: Jatra Riwayanto on Jun 4, 2008 9:34 AM

How to display records based on current month and last month???

i have a query that want to display the data for current month and last month. when i try to view the reports, all the data/key figures is return all in 0.00.
i modify the variables for this current month and last month but still the results is the same. i could not see the data. any advise on how to modify the variables for this current month and last month? i am thinking my variables is wrong.
for the current month variable:
the type of variable is characteristic value, processing by customer exit, reference characteristic is calendar year/month.
thanks for all who are kind to help me here....

Hi,
If you install the variables from BC correctly and they are in active state, you can use them directly use them. check for this month the total values at info cube is ZERO or some value. as you told you are getting ZEROS for your input.and check the data at cube level based on your query design, apply all restrictions, fileters and see do you get any data at cube level and compare with report.

In sales stage combobox how to display the step of the process coach

On the business talk page, in sales stage combobox how to display the step of the process coach and can be selected, not only sale stage?
thank you.

For example, in salesprocess list, there are SystemSaleProcess, RenewalSalesProcess and DefaultSalesProcess.
And SystemSaleProcess includes grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstages.
And grasp of the situation, including needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps.
Now in deal page, the deal type selected SystemSaleProcess, the salesstage is grasp of the situation, the first proposal, estimate submitting, the second proposal 4 salesstage can be selected in the salesstage drop-down box.
But if want to choose more than salesstage, would like to choose needs confirmation, background of the case confirmed, current problem confirmation, schedule and estimate confirmations, current system configuration confirmation 5 steps in the salesstage drop-down box, then how to do it?
thank you.

How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem

Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!

Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to display the index of current desktop when enable multiple spaces

Similar Messages

Maybe you are looking for