How to display the Previous years

Hi
  CJE0 - 12KST1A costs:budget/actual/commt/rem.plan/assd
How to display the previous years budget in above mentioned report. at present the report is showing only cumulative value of previous years,2009 and 2010.....
My requirement is from 2005 to 2009 i want display the value in this report, please through some light on this.
Thanks
S.Murali

Hi
But i want check the previous years budget for some number of projects not one by one, because the number of project are more.
The above mentioned solution is for one by one i can check the pervious years budget. But my requirement is collective.
Thanks
S.Murali

Similar Messages

  • How to calculate the previous year YTD balance in profit & loss statement

    Dear all,
    I would like to seek for advice on how to calculate the previous year YTD (Year to date) balance in profit & loss statement
    For example, if I enter May 2009, the YTD value should be a sum up of value from Jan to May.
    I have tried the current year YTD could be set in column selection dimension "financial period"
    FACT PER( Code = YearFirst(@Per):@Per )  Order By PER.Code Descending
    Then, I tried the previous year YTD in another column using
    FACT PER( Code = YearFirst(@Per-12):@Per-12 )  Order By PER.Code Descending
    But it failed -> Abnormally display three column, while the financial period I enter 200903 in parameter @Per
    Would anyone kindly help me on that?
    Regards,
    Simon Chiu

    Dear Jim,
    Thanks for your reply.
    However, the problems still cannot be solved.
    My expected output is 1 column listing the YTD value from previous year.
    I have tried two times using both the Code = YTD(@Per-12) and Code = YearFirst(@Per)-12:@Per respectively. However, the Excel display various column.
    I am using Financial Period 200903. In the last three column, it display the data in Financial Period 200901, 200902 and 200903 respectively.
    For the current year, the YTD is correct and show 1 column listing the sum of account in the Financial Period 200901, 200902 and 200903
    Would you kindly advice the code setting and how to set? Also, how I can access the syntax builder?
    Regards,
    Simon Chiu

  • How to define the Previous Year Up to Date in BI 7?

    Dear Expert,
    I have got a BI 7 report requirement which needs to restricted a key figure with Previous Year Up to date.
    I have found a time variable as Current Year Up to Date but not able to find the one for Previous Year Up to Date.
    Is it possible that I can use it as below to restrict the Key Figure:
      ZMP_CTYD (Current Year To Date) -1   (current year to date with the off set set to -1)?
    If this is not a right way, could you let me know what is the correct way to restrict the Key Figure for Previous Year Up to Date?
    Further information about the requirement:
    I need to get the difference between current year up to date and previous year up to date for a key figure.
    For example, to get the difference between the  amout related to the preiod between Jan 1, 2008 and May 22, 2008 and the amount related to the period between Jan 1, 2007 and May 22, 2007.
    Thank you very much!
    Arthur

    Hi,
    YTD and CTD are different. One is all the way till year end and the other one is through current period. One way of doing this is to define your restricted KF definition. You can use the existing Variable that you already have and insert / restrict posting period from 'time dimension"  1 - 16, in most cases there are 16 period, or 1 to "latest period" depending on what you have. The key here is your " POSTING PERIOD" restriction
    Hope this helps
    assign points if helpful

  • How to populate the data or details of only the present year and the previous year with respect to the given RATNG?

    Hi All,
    I have created a form with 5 blocks (namely ENQACMHDR, ENQACMDTL, ENQACEHDR, ENQACEDTL, ENQACSPEC), where i have 8 push buttons (namely ENTER_QUERY, EXEC_QUERY, CLEAR, FIRST, NEXT, PREVIOUS, LAST & EXIT).
    This form is created just for viewing purpose only. So after I execute, all the blocks have been blocked against insert & update.
    I query on 2 fields that is 'ENQNO' and 'RATNG' (Both the fields belong to the block ENQACMDTL).
    When I click on 'EXEC_QUERY' directly, all the data of all the years populates.
    But the user wanted the data to be populated from only the present year and the previous year.
    So , on 'WHERE Clause' of the property_palette of 'ENQACMDTL' block , I put in the following condition:
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    PROPERTY PALETTE (ENQACMDTL block)
    WHERE Clause
    SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR( ADD_MONTHS(SYSDATE,-12) , 'YYYY') OR SUBSTR(ENQACMDTL.ENQNO, 1,4)=TO_CHAR(SYSDATE, 'YYYY')
    Now the data of only the present year and the previous year is being populated. Its ok with the field of 'ENQNO'.
    The problem is when i query on field 'RATNG' . 'RATNG' is a Text_item with Number of Items displayed=5. (5 rows)
    The following are 2 columns of a Table (Name=ENQACMDTL) in Database.
    ENQNO
    RATNG
    2013900054
    500KC2
    2013900047
    800KC4
    2013520018
    750KC6
    2012900037
    1000KC2
    2012520109
    500KC2
    2012140019
    750KC6
    2011540036
    500KC2
    2011100030
    1000KC2
    2006100007
    90KD8
    2006750014
    750KC6
    2006900072
    500KC2
    The first 4 numbers of 'ENQNO' denotes the year. There are more than a lakhs of records.
    So when i query on the field 'RATNG',
    Example:For RATNG=500KC2;
    I click on ENTER_QUERY, On the field of 'RATNG' , i put in the value 500KC2 and click on  EXEC_QUERY; Details with respect to 500KC2 is displayed as well as all the other unwanted RATNG like 750KC6, 1000KC2 (which belongs to the ENQNO of the present year and the previous year) also gets displayed.
    I want details of only RATNG (500KC2) to be displayed, but only of the present year and the previous year, that is 2013900054, 2012520109 (ENQNO).
    Other than 500KC2 RATNG, no other RATNG must be displayed.
    The RATNG=500KC2 is also present for ENQNO=2011540036 , 2006900072. But I dont want these to be displayed.
    I want only the data or details of the present year and the previous year to be displayed or populated with respect to the given RATNG.
    Can You Help me or tell me what do i do for this?
    Hope I'm clear with my question!!
    If my question is not clear, let me know plz.
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle forms 6i.

    On key-exeqry you have to program.  Delete all other trigger codings for checking your condition.
    It dint work on key-exeqry.
    I tried key-exeqry on form trigger, block (enqacmdtl) and also on field(:enqacmdtl.enqno) , but none of them worked.
    It did not display the message.
    I have a 'PUSH-BUTTON:EXEC_QUERY.
    For EXEC_QUERY, Trigger : WHEN_BUTTON_PRESSED;
    I added the following code:
    if to_number(substr(:enqacmdtl.enqno,1,4))<to_number(to_char(add_months(sysdate,-12),'YYYY')) then
         message('The Rating is not present for the present year and the previous year');message(' ',no_acknowledge);
         raise form_trigger_failure;
    else
         execute_query;
    end if;
    It is working fine and the message is being displayed.
    But again I have a new problem and that is;
    On the field :enqacmdtl.enqno, when i enter the '2013%' and press 'EXEC_QUERY', it works fine.
    but when i enter '2006%' and press 'EXEC_QUERY', it shows the following error
    FRM-50016: Legal characters are 0-9 - +E. It does not display the message also.
    but when i enter the complete number, '2006580002', then it works fine , that is it displays the message (The Rating is not present for the present year and the previous year).
    The problem is because of '%', only when i put in the restricted data (which does not satisfy where condition).
    How do i solve this?
    Thank You Priyasagi.

  • I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

    I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

    Login to the app store with YOUR ID. You can't use the app store without an Apple ID. If there are apps on the phone that were purchased with the original owners ID, you do NOT own them. The owner had no legal right to give them to you and they are permanently tied to the ID that was used to purchase them.
    ...i was also allowed to purchase an apple network id for this phone...
    I have absolutely NO IDEA what you mean by that. You can not "purchase an apple network id".

  • How can I view my phone calendar for the previous year via my laptop?

    I have to extract appointments for tax purposes and as this is my first smart phone (Samsung Galazy S3), I have no clue if this is possible or where to look? I thought when my phone did its back up it backed up everything...now I'm guessing just my contacts?
    PLEASE HELP! TIME SENSITIVE!

        Help is here, sbsue! Lets see if we can figure this out. Which calendar are you using? Is it the one on your S3? If so, did you back up by going in settings > accounts > Gmail accounts and sync? If the calendar was synced, log on google.com/calendar to view the previous year. Let us know which calendar was used so that we can better assist.
    Thank you,
    LenaA_VZW
    Follow us on Twitter @VZWSupport

  • Posting of depreciation in the previous year 2008

    Hi All,
    My client wants to capitalize some expencess in the previous year as assets, and they would like to caliculate depreciation from 01.01.2008 to 31.12.2008, finally they would like to carryforward those amounts to fiscal year 2009.  My client is following jan-dec as fianancial year.
    The assets involved are product licences and will need to be set up  under asset  numbers 99009 onwards. The amounts to be capitalised in 2008 are as follows:
    XYZ               u20AC12,456.89
    As a full years depreciation of 10% of the total costs was taken for 2008, the capitalisation date should be set at 01/01/2008 to allow the figures to be calculated correctly and the correct npv to be carried forward to 2009.
    Please let me know how to do this activity?
    Thanks in advance
    Regards,
    Prasad

    Go to TCode: OAAQ,
    Open Fiscal Year 2008 and post the entries capitalization entry through JV in 2008. Now run AFAB for repeat run for 12th period.
    Howeve above will change the closing balance of 2008 which may be audited and approved.

  • How to set the fiscal year period as default in variables

    Hi All,
    How to set the fiscal year period as default it shoud take previous period when the report is executed.
    And also I need to do the same changes in reporting agent.
    Could you please any one help me.
    Points will be given.
    Thanks!
    Best regards,
    Ajay.

    Hi Ajay,
    Create a customer exit variable.Write the code in the include 'zxrsru01' using system date.
    take the system date from the system date variable and using that you can get the current fiscal year period.use this value and using string commands, you can get period.
    subtract 1 from this value.Using this you can get the previous fiscal period..
    Please let us know, if you need the coding part
    Hope it helps
    Thanks,
    Teja

  • Depreciation - Post in the Previous Year

    Hi,
    I am trying to post the depreciation for Jan 2010, but the system is giving the error that I need to post in the preious year first.
    However when i am trying to post the depreciation for the previous year, its giving the error that previous year is closed. Can anybody help me how to resolve this issue. Thanks.
    Regards,
    S.Sumana.

    Hello Sumana,
    I have encountered similar issue in one of my clients. What you need to do to remedy the situation is that you need to open the Asset fiscal year in OAAQ and then post depreciation month wise till the current year start. For posting depreciation you also need to open the old accounting period but if there were no asset postings in previuos years then you do not have that risk of anything getting posted in books(which are already closed) in those prior fiscal years. This was from books point of view you maintain status quo.
    Close the previous asset years and posting years once you are done with depreciation posting for a particular year.
    After you come upto date you can run the depreciation normally in current year.
    Regards,
    Vijay

  • Avoid the browser cache display the previous version of my flash website

    I frequently update my website. But customers do not see immediately the changes as the cache displays the previous version.
    How do I avoid this? Any advice is highly appreciated.

    Hi, this is a bit of a wrong forum since your problem doesn't pertain to AS per se, but for what it's worth I'm gonna tell you how i deal with the browser caching and it helped me (both SWF and JavaScript caches). I always use the Dreamweaver site and after I'm done compiling the SWF file I suply "Upload" the file to the testing/remote server. Hope that helps.

  • How to display the data from database(MS access) to a textbox

    anyone know ?

    how to display the data from database(MS access) to a
    textboxThe reply hasn't changed over these years. Read the tuutorial on how to fetch the data. You can display it anywhere you feel like. :)
    http://java.sun.com/docs/books/tutorial/jdbc/

  • User wants to see the previous year's W-2 forms, while he is accessing the present year W-2 form

    Hi Folks ,
    I need your expertise in resolving the issue,
    Requirement: User wants to see the previous year’s W-2 forms, while he is accessing the present year W-2 form (2011, 2012 and 2013 years)
    Need to get the information whether we could able to get the previous year’s W-2 forms using standard functionality? Or we should use the customize functionality
    If we want to use the custom functionality , please let us know how to do it ?
    Thanks and Regards ,
    Deepak

    you can use the Features UTREL and UTRES
    Read complete configuration & guide document
    W-2 Online User Guide - ERP Human Capital Management - SCN Wiki
    Configuring Online W-2 - Online W-2 - SAP Library

  • NO ANSWER YET. How do I delete previous years from my Calendar?

    I use the Calendar as a diary & have deetails from 2005.  How do I delete previous years?
    Solved!
    Go to Solution.

    I spent some time looking through my calendar and couldn't find any option/way to delete a whole year's entries and appointments. My suggestion is to make sure to constantly update your calendar as things occur that way you won't have to delete the events one by one. I could be wrong and there could be some special/hidden setting I don't know about to delete a whole year's entries.
    C41vin Tirr311
    O.O -_-
    -Look through the posts before posting a new question.
    -Kudo people who posted something you found helpful.

  • In sap scripts how to display the driver program

    Hi,
        I Want to know the sap scripts How to display the output to driver program

    Hi,
    Go to NACE Transaction.
    Select application for ex: if sales V1.
    Click on output types.
    Select the output type for ex : BA00
    Double click on Processing routines.
    There you can find the Driver Program name and Script/smart form name.
    Reward if useful.
    Thanks,
    Raju

  • How to display the sort value in the selection screen in the report title

    Dear All,
    How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
    Good day,
    Thanks and regards
    Arun S

    Hi Arun,
    Try this.
    1, Set one dynamic parameter,
    2, Drag and drop that parameter into  your report title.
    3, Pass the value(sort value) dynamically from your application,
    4, Cheers..
    Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then  set the data source from CR designer. and darg and drop that data column into the report.
    Hope this will work,
    Regards,
    Salah
    Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

Maybe you are looking for

  • HT4061 I downloaded  IOS7 on My Iphone5 and put in a 4 digit lock code for find my phone but My phone wont Accept it. It wont let me restore/backup.

    I put in My IMEI code and ICLOUD tells me THAT THE product has been replaced. I am doing This to TRY TO ACTIVATE MY IPHONE5 AS it wont Accept My 4 digit code after downloading IOS7 So My phone in disabaled, wont let me backup,restore kos FIND MY PHON

  • Can't upload more than one photo to facebook

    Hallo, I am new to this, so I apologise if I am doing things wrong. I have a Z2 which is fully up to date and oterhwise doing fine, however for the last week or so I have discovered that I can no longer upload more than one picture from my album to f

  • Can't connect to apex homepage

    hi there, Downloaded Oracle Database Express Edition but I'm unable to connect to the home page via browser using http://localhost:8080/apex. When I perform the following commands: SQL> conn / as sysdba SQL> select status from v$instance; I get: STAT

  • Solaris- sudo not found

    While configuring the solaris resource adapter on IDM 7,i m getting the following error Test connection failed for resource(s): Solaris: sudo: not found\n I went thru the forum but could not figure where to put the following: /usr/local/bin/sudo inst

  • Trade promotion and agreement relationship

    Hi friends, I am trying to find a table which stores the link between trade promotion and agreement. I checked CGPL_PROJECT,CGPL_MKTPL_TPATTR and CGPL_MKTPL_ATTR already but didn't find entry for agreements. If you know the table, please let me know.