How to Display the SAVE  file name dialogue in Forms 6i

Dear All,
Just like we use Get_file_Name to display the MS Open file dialogue..
how do we display the SAVE file dialogue in forms..??
whats the function name???
regards,
Sidhant

hello friend,
u can use webutill lib to open/save dialog box
also must refer this link,
Re: How To Call Save As Dialog?
Regards
Chandan

Similar Messages

  • How to display the actual code name on the table of the uix file?

    I have established entity object:Schoolinfo,and a view object SchoolinfoView,and registered in the application module.and I drag and drop to a uix file the Datacontrol and it works well,i can see the schoolinfo table's contents.The problem is:in schoolinfo there is an attribute schooltype code,like 1,and referenced to another table:CodeDict in the database, and I want to display the actual code name when displaying the table on the uix file,like "middle school", not just the code 1.How can I do?

    This is more of BC4J question.
    The data that is displayed (View) is a SQL query. You should be able to change the SQL query represented by the view object appropriately to get the desired output. You can see more information on view objects from Jdev help to get more information on it.
    Thanks
    Vijay V
    Team UIX

  • How to display the HTML File Titles instead of File Names

    Hello All,
    I want to display the HTML file titles instead of File names in the Search Results. I've tried to give this command in the 'Visible Properties' in the 'SearchResourceRenderer' as:-
    Visible Properties: rnd:displayTitle
    However this is not working for me. If anyone has an idea of what to pass here or any other alternative to display the Titles.
    Regards
    Vaib

    Summary of steps:
    1) Standard Layout Set used: SearchResultLayoutSet
    2) Create a new layout set using ADVANCED COPY
    3) Change properties as you require
    4) Next modify the search OTH file to reflect this newly created Layout Set (under KM > root > etc > oth > search.oth edit xml file property rndLaoutSet from SearchResultLayoutSet to MyCustomSearchResultLayoutSet)
    5) Check in the document to complete the editing process if Edit Locally is used!
    6) Lastly, activate the OTH file by –
    •     Setting Debugging settings via Debugging Settings
    •     Performing a normal search
    •     Clicking Rendering information and then following link OTH Overview click on Reload
    7) Reload above reloads the OTH file and performing search again will yield the desired result
    8) To turn off the Rendering Information link remove the user id from Debugging Settings.
    Cheers
    Ankit

  • How to Edit the Title (file name) on forms 10g Screen.

    Hi ,
    How can one edit the Title ,and <(file name)> on forms 10g Screen ....
    I tried editing through the forms module preperty palette , but could n't change the Title, or file name on forms menu screen ...
    I guess , the entries are made through some other means...
    Please let me know on how to do this .
    Need a quicker reply ..
    Thanks in Advance
    Sanu

    using the below code too not getting me the new names entered by me ... still the old title names are comingWhat do you mean by new nemes? It will return you the actual file name which is saved in phycical location and form name will return you the module name which displays when you open forms in builder.
    Or you mean something else then its better to provide any example..like what is happening actually with you.
    -Ammad

  • How to set the default file name for upload

    Hi All,
    I have the following BSP app for a file upload of a csv file. I want the page when displayed show the default file name to be loaded as c:\db1\currentPM.csv
    What changes do I need to make to get the default file name in the BSP app.
    Thanks
    Karen
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content id               = "content"
                   design           = "classicdesign2002design2003"
                   controlRendering = "sap"
                   rtlAutoSwitch    = "true" >
      <htmlb:page title="File Upload " >
        <htmlb:form method       = "post"
                    encodingType = "multipart/form-data">
              <htmlb:textView text   = "File:"
                              design = "STANDARD" />
              <htmlb:fileUpload id          = "uploadID"
                                onUpload    = "UploadFile"
                                upload_text ="Upload"/>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    On Input Processing
    event handler for checking and processing user input and
    for defining navigation
    DATA: EVENT TYPE REF TO IF_HTMLB_DATA,
          DATA TYPE REF TO CL_HTMLB_FILEUPLOAD,
          LV_OUTPUT_LENGTH TYPE I,
          LV_TEXT_BUFFER TYPE STRING,
          FILE_NAME TYPE STRING,
          FILE_PATH TYPE STRING ,
          INTERN TYPE TABLE OF  ZALSMEX_TABLINE.
    DATA: LT_BINARY_TAB TYPE TABLE OF SDOKCNTBIN .
    TYPES: BEGIN OF TY_TAB,
           FIELD1(2) TYPE C,
           FIELD2(2) TYPE C,
           FIELD3(2) TYPE C,
           FIELD4(2) TYPE C,
           FIELD5(2) TYPE C,
           END OF TY_TAB.
    DATA:  WA_TAB TYPE TY_TAB,
           IT_TAB TYPE TABLE OF TY_TAB.
    TYPES: BEGIN OF TY_LINE,
              LINE(255) TYPE C,
           END OF TY_LINE.
    DATA:  WA_LINE TYPE TY_LINE,
           IT_LINE TYPE TABLE OF TY_LINE.
    EVENT = CL_HTMLB_MANAGER=>GET_EVENT_EX( REQUEST ).
    IF EVENT IS NOT INITIAL AND EVENT->EVENT_NAME = HTMLB_EVENTS=>FILEUPLOAD.
      DATA ?= CL_HTMLB_MANAGER=>GET_DATA( REQUEST = RUNTIME->SERVER->REQUEST NAME = 'fileUpload' ID = 'uploadID' ).
      FILE_NAME = DATA->FILE_NAME.
      FILE_PATH = FILE_NAME.
      IF DATA IS NOT INITIAL.
        CALL FUNCTION'SCMS_XSTRING_TO_BINARY'
         EXPORTING BUFFER = DATA->FILE_CONTENT
         IMPORTING OUTPUT_LENGTH = LV_OUTPUT_LENGTH
         TABLES BINARY_TAB = LT_BINARY_TAB .
        CALL FUNCTION'SCMS_BINARY_TO_STRING'
        EXPORTING INPUT_LENGTH = LV_OUTPUT_LENGTH
         IMPORTING TEXT_BUFFER = LV_TEXT_BUFFER
         TABLES
         BINARY_TAB = LT_BINARY_TAB.
        IF SY-SUBRC = 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
        SPLIT LV_TEXT_BUFFER AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO TABLE IT_LINE.
        IF SY-SUBRC = 0.
          LOOP AT IT_LINE INTO WA_LINE.
           SPLIT WA_LINE AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
            split wa_line at ','
            INTO WA_TAB-FIELD1 WA_TAB-FIELD2 WA_TAB-FIELD3 WA_TAB-FIELD4 WA_TAB-FIELD5.
            append wa_tab to it_tab.
          ENDLOOP.
        ENDIF.
      ENDIF.
    ENDIF.

    Also, I missed another point.
    In the folder c:\dbdata I have a number of CSV files on the user frontend. I would like the BSP application to get the list of files in the folder and process them one after the other. How can I get the list of files on the folder in the user PC and how to process them one after the other.
    I want the form to display only the default folder and once I press on upload it must process all files and display the status of processing on the same page.
    Please kindly share ideas how I can implement this app.
    Thanks
    Karen

  • Urgent, SOS for help: How to show the pdf file name at the right bottow of the page?

    I want to show the pdf file name at the right bottow of the page for filing purpose, anybody knows anything?
    I know it can be showed at the left bottom through adobe printer, but i need it to be at the right bottom.
    thanks.

    The result is a UIWebView that displays a blank page. No errors occur in the UIWebView delegate method. The thing is that data has the correct length, in bytes, for the PDF I am trying to display, and I also get the pdf file in Library/Application Support/iPhone Simulator/4.3.2/Applications/ Does anyone have an idea as to what might be going wrong here or how I can better debug this problem?

  • How to print the report file name and path and the last mod date

    Good morning,
    I am trying to print on the footer of the report the report file name and path as well as the report last modification date.
    Anyone would know how I can do that? I have checked the doc but found nothing.
    Thks. Philippe.

    Did you ever determine how to print report name and report last mod date?
    Thanks

  • How to retreive the dynamic file name in the AAE configuration?

    Hi Guys,
    I have configured File to File with the integrated configuration and in the mapping i need to retreive the file name dynamically and i am unable to retreive it from the run time in AAE configuration. I am able to retreive with the normal configuration where integration engine is the run time.
    I am using the code as below.  Is it possible to retreive the file name dynamically in the AAE configuration? any help or suggestions would be appreciated.
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName;
    Thanks,
    Srini

    Hello Srinivas,
    Brief Solution:
    1. Using dynamic configuration, set the attribute value of payload dynamically to ASMA
    2. Using AF module, write the value of ASMA in a variable
    3. Using the variable substitution, set the receiver file name schema
    Plz go through the below link:
    http://wiki.sdn.sap.com/wiki/display/XI/CombiningthreedifferentaspectsofPIinoneshot
    Thanks,
    Satya Kumar

  • How to chante the PDF File Name in Broadcasting

    Hi Team,
         Could you help me?, I am in a project where the customer need  the Following requirement with the PDF File Name in the Broadcasting:
    I am configuring one distribution Job in Broadcasting configuration Tab this Job need send a report via E-Mail in  PDF Format, but the customer requirement is that the file name is sent with the description name and not with the technical name from report.
    Then, some of you know "How change the name to the PDF File that is sent in the Distribution Jobs, I need the Description name, because actually the E-mail send the PDF File with the Technical Name, and the user does not want in that way".
    Thank you very much.
    Leslie Denise.

    Hi,
        Thank you for your answer, but that parameter i added in the content of the email. But I need change the name from the file not to add the description in the subject or in the content.
    And if there are somebody to know if is possible to change the name from the PDF File I will apreciate your comments and answers.
    But Thank you so much for your answer voodi.
    Regards
    Leslie Denise.

  • How to change the RPD file name without deploying on EM

    Is there a way to change the RPD file name so it doesn't have BI0002 or BI0003 on the end of it? I can delete my BI0002 file and point the NQSConfig.ini file to my new FileName.rpd but when the BI services restart the BI0002 file reappears in the repository directory and the NQSConfig file changes to reflect this. It's like the only way you can change this is in the Enterprise Manager, but that always adds the suffix to the file.
    Any suggestions?
    Here's what the docs say:
    When you upload a repository, it is copied to the local repository directory for each Oracle BI Server component, located at:
    ORACLE_INSTANCE\bifoundation\OracleBIServerComponent\coreapplication_obisn\repository
    If you have published the repository in shared mode, then the repository is also copied to the shared network location.
    After the repository is uploaded, it is given a version number suffix (for example, SampleApp_bi001.rpd). This version number is incremented each time that the repository is uploaded. To revert to a previous version, you must re-upload the specific version of the repository to use.
    Note that you can delete older versions from the repository directory or shared network directory to reclaim disk space.
    What does that mean? I have to use an old rpd file in order to get rid of the suffix?

    Hi,
    It can be changed, although I do not no exactly how. You have to take a look at the MBeans which are used to deploy a new repository. The suffixed is used to insure you do not overwrite an existing RPD
    Cheers,
    Daan Bakboord
    http://obibb.wordpress.com

  • How to specify the download file name??

    Hi guys~~~
    I have servlet which can generate a *.pdf file,I found if I didn't setContentType="application/pdf",I can download it!!But the download file name is my servlet file name.If I want to change the download file name,How do I do????
    thanx a lot!!!Best regard!

    Thanx for ur help...But I encounter a new charllenge now...
    I use a javascript(window.open("/myservlet")) to open the download file servlet.
    Everything is okay.But when I finish downloading the file which window I opened cant close itself automatically.
    I am really not understand the header parameter of the HTML header,could someone give me something about this??
    Thanx again!!!!

  • Mail to File - how to read the attachment file name from the subject.

    I need to use the SHeaderSUBJECT's value in the receiver file adapter's variable substitution.
    This is a Mail to File scenario without design part where the attachment file name comes in the subject of the mail.
    I see the below in the dynamicconfiguration section. How can i retrive the value from dynamicconfiguration section to the filename.
    <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    <SAP:Record namespace="http://sap.com/xi/XI/System/Mail" name="SHeaderSUBJECT">PlainAttachment.txt</SAP:Record>
    </SAP:DynamicConfiguration>
    Points will be rewarded.

    Try to use sthg like this in a UDF :
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().getStreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create(“http://sap.com/xi/XI/System/Mail”,“SHeaderSUBJECT”);
    String value = conf.get(key);
    or in a JAVA mapping :
    DynamicConfiguration dynConf = (DynamicConfiguration) param.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey dynKey = DynamicConfigurationKey.create((“http://sap.com/xi/XI/System/Mail”,“SHeaderSUBJECT”);
    String keyValue = dynConf.get(dynKey);
    param is the map object from the execute() method of your mapping ...
    Hope this helps
    Chris
    Edited by: Christophe PFERTZEL on Apr 23, 2008 11:34 AM

  • InfoPath 2013: How to find the current file name?

    Hello,
    Is there any way to find the file name in the rule formulas when an existing xml file in a sharepoint form library is being edited in InfoPath? I am looking for a function that returns the current file name that is being edited.
    Thank you,

    Hi,
    According to your post, my understanding is that you want to get the current file name in the InfoPath form.
    Here is a similar thread for you to take a look at:
    http://social.technet.microsoft.com/Forums/en-US/a24f01d5-744c-4b75-b30d-3295311ab054/how-do-i-find-the-file-name-of-the-currently-open-infopath-form?forum=sharepointcustomizationlegacy
    Best Regards
    Dennis Guo
    TechNet Community Support

  • How to see the whole file names in finder column view?

    Hi guys,
    I like to use finder in column view. However, most of the times, the file names get trunked and I have to redim the column to see the whole names. Other day, without wanting to, I must have pressed some key combination, and the column got redim automatically, so I could read the whole file names. So, my question is if does anybody know how to achieve this?

    I don't know what "redim" means, but if you double-click the column separator, it becomes wide enough for the longest name. If you Option-double-click it, all columns become wide enough for the longest name in each column.

  • How to display the attached file of DMS in WEB Dynpro

    Hello everybody! I have to work with DMS documents on the portal. Do You know, how display the attached files of DMS document in WEB Dynpro?
    Pavel Truhlář

    Hi Pavel,
    By using the below F.M we can display DMS Document.
    CALL FUNCTION 'CVAPI_DOC_VIEW'
      EXPORTING
        PF_DOKAR               = 'ZAP'
        PF_DOKNR               = LS_DMS_TABLE-DOKNR
        PF_DOKVR               = '00'
        PF_DOKTL               = '000'
       PF_HOSTNAME            = 'DEFAULT'
       PF_APPL_START          = ' '
       PF_GET_URL             = 'X'
    IMPORTING
       PFX_URL                 = V_URL
    EXCEPTIONS
       ERROR                  = 1
       NOT_FOUND              = 2
       NO_AUTH                = 3
       NO_ORIGINAL            = 4
       OTHERS                 = 5.
    After getting the V_URL Create External Window.
      LO_API_COMPONENT  = WD_THIS->WD_GET_API( ).
      LO_WINDOW_MANAGER = LO_API_COMPONENT->GET_WINDOW_MANAGER( ).
      LO_WINDOW         = LO_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW(
                    URL = LW_URL ).
    BR,
    Jack.

Maybe you are looking for