How to display the status message based on student marks..

Hi all,
i have student table that has columns mark1,mark2,mak3...
i want to display the student name,staus as pass or fail based on the marks.. in a single query..
if the student score above 30 in all the subject i should display the status as pass other wise fail ( note:- status is not a column in the table)
Thanks

select e.student_name
      ,e.mark1
      ,e.mark2
      ,e.mark3
      ,decode(pass.flag,'Y','PASS','FAIL') status
from   exam e
       , (select e2.student_id,'Y' flag
          from   exam e2
          where e2.mark1 > 30
          and    e2.mark2 > 30
          and    e2.mark3 > 30) pass
where e.student_id = pass.student_id (+);
STUDENT_NAME      MARK1      MARK2      MARK3 STATUS
CNAME                40         50         60 PASS
DNAME                60         70         80 PASS
ANAME                20         30         40 FAIL
BNAME                30         40         50 FAIL Edited by: JamesK on May 30, 2013 12:38 PM
Edited by: JamesK on May 30, 2013 12:40 PM

Similar Messages

How to display the eror message in the iView

Hi
I want to check the user input in the client side and display an error message in the iView instead of displaying the error message as an alert
it is ok when I tried to do it as an alert
alert('ERROR MESSAGE');
but the problem is how to display the error message as a text in the iView ...
I wrote the below code..
any one can see it and has any sugestion?
Thanks
=============
<%@ taglib uri="tagLib" prefix="hbj" %>
<%
String compid = "";
String message = "";
%>
<hbj:content id="MyContent">
<hbj:page title = "Selection Screen">
<hbj:form id = "myForm">
<br>
<br>
<br>
<center>
<H3>Benefits Statement </H3>
<H4>Selection Screen</H4>
<hbj:gridLayout
id="FSSLayout"
debugMode="False"
width="40%"
cellSpacing="5"
>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="1"
width="10%"
horizontalAlignment="LEFT"
style="WildStyle"
>
<hbj:label
id="label_inputPernr"
required="TRUE"
text="Personal Number:"
design="LABEL"
labelFor="inputPernr"
/>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="2"
width="40%"
horizontalAlignment="LEFT"
>
<hbj:inputField id = "inputPernr"
>
<%
compid=MyContent.getParamIdForComponent(inputPernr);
%>
</hbj:inputField>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="10"
columnIndex="1"
width="40%"
horizontalAlignment="CENTER"
colSpan="2"
>
<hbj:button id = "myButton" text="Submit.." design="EMPHASIZED"
tooltip="Click me to submit this form" onClick="ClickEvent" onClientClick="validRequired()">
</hbj:button>
</hbj:gridLayoutCell>
</hbj:gridLayout>
</center>
<p font="Arial" size=20><%= message%></p>
</hbj:form>
<SCRIPT LANGUAGE="Javascript">
function validRequired()
var myvar = document.getElementById('<%=compid%>').value;
var ivID='<%=componentRequest.getComponentContext().getContextName()%>';
if (myvar = " ")
message = "Enter Employee Number";
ivuRefresh(ivID);
htmlbevent.cancelSubmit=true;
</SCRIPT>
</hbj:page>
</hbj:content>

No problem, here is an example of some html code and javascript that you can adapt to your needs. You can display this standalone to see how it works.
I hope this helps
<html>
     <head>
          <script language="JavaScript">
               function validateForm(){
                    if(document.getElementById("nameField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Name";
                    else if(document.getElementById("ageField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Age";
                    else if(document.getElementById("idField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the id";
                    else
                         document.getElementById("errormessage").innerHTML = "";
          </script>
     </head>
     <body>
          <table border="0" cellpadding="0" cellspacing="0">
               <tr>
                 <td>Name</td>
                 <td><input type="input" id="nameField" name="nameField"></td>
               </tr>
               <tr>
                 <td>Age</td>
                 <td><input type="input" id="ageField" name="ageField"></td>
               </tr>
               <tr>
                 <td>Id</td>
                 <td><input type="input" id="idField" name="idField"></td>
               </tr>
               <tr><td><font color="red"><span id="errormessage"></span></font></td></tr>
               <tr><td><input type="button" name="validate" onClick="validateForm()" value="Click to validate"/></td></tr>
          </table>
     </body>
</html>

How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

How to display the status of a SubVI on the front panel?

Hi,
I am writing a program to control an instrument through a serial communication port. The control and communication functions are integrated in a SubVI and they work fine.
In the front panel of the main VI, I want to add some indicators to display the status of those controls in real time, such as using some LEDs to show whether the program is running in some loops of the SubVI, or use some indicators to show some variables in the SubVI.
I tried using global variables, but I can't make them work in real time (or maybe I didn't do it right). The values of the global variables are actually changing on the fly, but the indicators on the front panel wouldn't reflect those changes until the program return
ed from the SubVI.
Is there a way to do this in Labview 6.0.2?
Your earlist help is very much appreciated.
Best regards,
Hua

Hua,
I have attached an example in which a front panel boolean indicator is toggled in the subvi. Also, a front panel stop button is used to stop the loop execution in the subvi. References are passed to the subvi instead of the actual control values.
Without seeing your code I'm not sure what was going on with the globals, but you had to have a data dependency somewhere which was keeping the code from running until after the execution of the subvi. The code must be totally independent of the subvi in order to run. Also, in order for the update to work it would have to be operating in a loop.
Attachments:
Main.vi ‏13 KB
subvi.vi ‏20 KB

How to display the return message in popup window

Hi Experts,
In WDA i want to display the return message through popup window.
Regards,
M.Chella Meenal.

hi Chella Meenal ,
you can generate the popup using popup factory class also , look at the below sample code for displaying message in a popup , and you can do your own configurating like visible , enable the buttons you want ..
data:
    lr_component type ref to if_wd_component,
    ls_conf type wdr_popup_to_confirm,
    lt_texts     type string_table.
ls_conf-window_position = '1'.
ls_conf-button_1-text = 'OK'.
ls_conf-button_1-icon = 'ICON_OKAY'.
ls_conf-button_1-enabled = 'X'.
ls_conf-button_1-visible = CL_WD_UIELEMENT=>E_VISIBLE-VISIBLE.
ls_conf-button_2-visible = CL_WD_UIELEMENT=>E_VISIBLE-NONE.
ls_conf-button_cancel-visible = CL_WD_UIELEMENT=>E_VISIBLE-NONE.
lr_component = wd_comp_controller->wd_get_api( ).
append 'some text' to lt_texts.
cl_wd_popup_factory=>popup_to_confirm(
      component        = lr_component
      text             = lt_texts
      CONFIGURATION    = ls_conf
      window_title     = 'some title' ).
Regards
Chinnaiya P

How to display the Output messages on LabVIEW

Hi,
I'm building a simple user interface on LabVIEW and I have the following question:
- TestStand has an Output Tab where I display some messages using Engine.OutputMessage; How can I do the same thing on my UI?
I've attached a printscreen of my TestStand sequence as an example of what I want do do on LabVIEW.
I apreciate all the help.
Thanks in advance.
Regards,
Daniel Coelho
Daniel Coelho
VISToolkit - http://www.vistoolkit.com - Your Real Virtual Instrument Solution
Controlar - Electronica Industrial e Sistemas, Lda
Attachments:
TS PrintScreen.JPG ‏137 KB

Sorry, from your post in the LabVIEW board I did not understand that it was the Output message that you were looking for.
I thought you wanted the results from your test steps displayed on the user interface.
It is the “Output Panel” in the sequence editor that displays your output message, but I do not know if there is default Output panel activeX indicator for user interface that the TestStand engine would update automatically like it does the execution view.
Maybe someone else knows
As also pointed out, the UI messages is your other option.
The Output Message event number is 40
http://zone.ni.com/devzone/cda/epd/p/id/3879
UIMsg_OutputMessages–(Value: 40) TestStand sends this message at periodic intervals when it holds references to output messages that calls to the OutputMessage.Post method queue. TestStand transfers the queued messages to an OutputMessages collection attached to the UIMessage.ActiveXData property for this event. An application that processes output messages should copy the output message references from the collection in UIMessage.ActiveXData to its own private OutputMessages collection by passing its private collection to the OutputMessages.CopyMessagesToCollection method. An application calls the Engine.NewOutputMessages method to create a private OutputMessage collection. TestStand generates this event only if the Engine.OutputMessagesEnabled property is True. Because there can be more than one handler for this event, the application should not modify the OutputMessages collection the UIMessage.ActiveXData property holds.
Omar
Message Edited by OmarGator on 10-09-2008 10:12 AM

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

How to display the information message in the end in BDC

Dear All,
I have been submitting a BDC for FB01, in a dialog program of mine.
The BDC gets executed successfully but it does not display the 'Documnet No....generated' information message in the end.
I have even written the following code in the BDC, after call transaction, to accomplish this, by assigning the value of genno (variable) to sy-msgv1, but it's not working.
call transaction 'FB01' using bdcdata1 mode 'E'.
message id sy-msgid type sy-msgty number sy-msgno
        with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
genno = sy-msgv1.

Hi,
try this its easy .
create an internal table e_report for sucess with the fields you want to display .like the same for F_tab for failure .
so finally u will be having the success record in e_report and the failure in f_itab.
call transaction 'FB09' using bdcdata MODE 'N' MESSAGES INTO IT_ERROR.
IF sy-subrc eq 0.
E_report-status = 'Sucessfully Updated'.
e_report-belnr = itab-belnr.
e_report-year = fiscalyear.
APPEND E_report.
else .
   F_tab = itab.
   F_tab-year = fiscalyear.
   F_tab-status = 'FAILED'.
   APPEND F_tab.
finally print this
sort e_report by belnr ascending.
LOOP AT E_report.
    at FIRST .
       WRITE:/'**********SUCCESSFUL RECORDS ARE **********'.
       FORMAT COLOR 6.
       WRITE:/ 'Document Numer',20 'Year',35'Status',54 ''.
    ENDAT.
    FORMAT COLOR 3.
    write:/ E_report-belnr,20 E_report-year ,35 E_report-status.
    FORMAT COLOR OFF.
   at LAST.
     write:/ 'Total No.Of Successful Records:',sy-tabix.
     FORMAT COLOR OFF.
   ENDAT.
   RESERVE 20 LINES.
ENDLOOP.
IF F_tab is initial.
       FORMAT COLOR 1.
       WRITE:/ ' NO Errored Files'.
       FORMAT COLOR OFF.
ENDIF.
WRITE:/ SY-ULINE.
new-PAGE.   " to display in a new page
sort f_tab by belnr ascending.
LOOP AT F_tab.
    at FIRST .
       WRITE:/'**********FAILED RECORDS ARE **********'.
       FORMAT COLOR 6.
       WRITE:/ 'Document Numer',20 'Year',35'Status',54 ''.
    ENDAT.
       FORMAT COLOR 5.
       WRITE:/ f_tab-belnr ,20 F_tab-year, 35 F_tab-status.
    at LAST.
     write:/ 'Total No.Of Failed Records:',sy-tabix.
    ENDAT.
ENDLOOP.
ENDIF.
if they want to display in the excel sheet pass the internal table to the F.M.
plz motivate me.
by rewards.
thanks
vinoth

How to display the o/p based on i/p in mpp

Hi frnds,
IN MPP,
use 2 tables ztest1, ztest2
Input fields :repno, plant, date, material (but date is get from user others are get from ztest1 table)
in ztest1some records is their(es repno=100 etc,)
Giver the repno then press "ENTER" button display the plant , material and then modify the material with date ,
Press 'modify button' save into ztest2.
How can i archieve,help me.
Thanks in advance.

Hi kumar,
1. create 2 internal table based on u r ZTABLE. in top include. and define work area also WA.
2. create a screen like 1000 and in screen create a table grid using table wizard and refer u r internal table .
3. create a pushbutton name modify.
4. then in PAI module write following code.
CASE SY-UCOMM.
WHEN 'MODIFY''.
LOOP AT ITAB1.
MOVE-CORRESPONDING ITAB1 TO WA.
INSERT INTO ZTABLE VALUES WA.
COMMIT WORK.
ENDLOOP.
ENDCASE.
i think u get some idea using this code.
regards,
Abhilash

How to display the status of script sent via fax?

Hi Experts,
I am beginner in ABAP....I am sending a script(complaint) via fax to the user who posts the complaints. But is there any way that I can display whether the fax was succesfully sent/failed.
The applications is a module pool program which in turn call an executable program where we have the logic for the form to be sent via fax.The report of this fax is saved in the SAP outbox but we want to display it to the user as well.
Thanks in advance.....

Hua,
I have attached an example in which a front panel boolean indicator is toggled in the subvi. Also, a front panel stop button is used to stop the loop execution in the subvi. References are passed to the subvi instead of the actual control values.
Without seeing your code I'm not sure what was going on with the globals, but you had to have a data dependency somewhere which was keeping the code from running until after the execution of the subvi. The code must be totally independent of the subvi in order to run. Also, in order for the update to work it would have to be operating in a loop.
Attachments:
Main.vi ‏13 KB
subvi.vi ‏20 KB

How to get the error message from a AWS code to display on the portal

I implemented IAuthProvider, it works, within the code when authentication fails, I threw AccessDeniedException(customMessage) but when the login fails, the login screen always display the "You could not be logged in to the portal." error message, how can I get it to display the custom message? Am I throwing the wrong exception?
TIA.

Simpler? Uhm as far I know there doesn't exist any magic and you have just to write one or two lines of Javascript code yourself. Is that hard?

Error Message Displaying the status Bar not like popup message

Hi all,
My Requirement is while creating invoice if pricing conditons is repeted , system should thorough the error message like (uplicate Condition Types Are Not Possible in the status Bar but Im getting poup Error message So I want to display the same message in the status Bar.
Please Help me any one.
Regards,
Prathap

I dont want to Display the popup, I want to Display in Status Bar as a Error Message.
Like this .
If I put message type 'E' its Displaying popup message , MESSAGE ' Duplicate Condition Types Are Not Possible.' TYPE 'E'.
If I Put messge type 'I' its Displaying in Status Bar .
Regards,
Prathap
Edited by: giri prathap on Sep 13, 2011 12:35 PM

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display the file status in the status bar?

Hi all,
Can anyone tell me how to display the file status in the status bar?
The file status can consists: the type of the file, the size of the file etc..
thanx alot..

    class StatusBar extends JComponent {
          JLabel l = new JLabel("ready");
        public StatusBar() {
              super();
              setLayout(new BoxLayout(this, BoxLayout.X_AXIS));
              add(l);
          public void setText( String prompt ) {
               l.setText(prompt);
               setVisible( true );
        public void paint(Graphics g) {
              super.paint(g);
    }

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display the status message based on student marks..

Similar Messages

Maybe you are looking for