How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

Similar Messages

How to get the value of a variable in group footer in the report footer also

I have a placed a formula as below at the group footer and the report footer. The data is grouped on the basis of duedays which is again formula and the value in that is appearing correctly.
Whilereadingrecords;
Global Numbervar CNTONE;
Numbervar P := P+1;
IF P = 1 AND {@DUEDAYS} = 0
THEN CNTONE := {spSUPPLIERSOA;1.INVOICEBAL}
ELSE IF P>1 AND {@DUEDAYS} = 0
THEN CNTONE := CNTONE + {spSUPPLIERSOA;1.INVOICEBAL}
At the group footer I get the value correctly for CNTONE but when I place the formula in Report footer I get the value for CNTONE as 0.
Please do let me know how I could get the same value in the report footer also.
Regards
Sreejith J

Hi Abhilash;
When I give the statement whileprintingrecords then my above formula sums up only the first record and the last record of the group and when I give whilereadingrecords it adds up all the data in the group correctly.
The formula that you mentioned for the report footer had worked out and it is showing my result correctly.
I did not put up the reset formula on the group footer because as the group changes I had used another variable in another formula for example for the second group I used
Whilereadingrecords;
Global Numbervar CNTTWO;
Numbervar Q := Q+1;
IF Q = 1 AND {@DUEDAYS} = 30
THEN CNTTWO := {spSUPPLIERSOA;1.INVOICEBAL}
ELSE IF Q>1 AND {@DUEDAYS} = 30
THEN CNTTWO := CNTTWO + {spSUPPLIERSOA;1.INVOICEBAL}
I have set up total 5 such formulas as the number of groups that will be formed is 5. I have put up these formulas on the group footer and suppressed it as I dont want to get it displayed.
The as you suggested the solution for Report Footer I did that and getting the result correctly.
I dont know I may be following a longer procedure
Take Care
Sreejith J

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

How to display filter values in analyzer

Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,

It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it.

How to display negative values in a screen field of a screen

Hi All,
Please let me know how to display negative values in a screen field of a screen.
thanks

Hi Kishore,
You can do this method. In the screen , create a text field of CHAR instead fo creating an INT4 field.
I have created a field of CHAR of name say TEXT.
In the main program,
declare a variable of the same name ie. TEXT.
data: TEXT(5) TYPE C.
In PBO, just assign the negative values.
It will work.Since there is automatic conversion between character and integer data types, it will work for positive values as well.
Regards,
Sylendra.

How to display field value in header text?

Hi Experts,
In va03, the client wants some number in the header text which is stored in vbak. Please tell me:
1. Which method should I use in BADI?
2. How to display in header text?
Regards
Mani

Hi Kiran,
Thanks for the prompt reply. How can I display some hard code like 'Test' in the header text in va03.
Text name = 0000001252
Language = EN
Text ID = Z001
Text object = VBBK
READ_TEXT is used to get the values from the header text, but how to set the values?
Regards
Mani

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else on top of it.

On some pages the text from more than one paragraph stack up on top of each other, like writing something then writing something else over the top of it. Some pages will run text and pictures together, like a car rear-ending another or a train pile up. Other pages will cut an image or text short, i.e. it will display a portion of the top of the image or text but not the rest. This happens on Amazon for example, the section where it says "Customers who looked at this also looked at" will allow only a certain amount of the upper portion of the description immediately below the picture of the product but below that section everything is fine until I get to another section displaying more products and their descriptions and then it cuts the bottom portions off again. I've noticed this behavior mostly in the sections with product photos, the text sections seem okay. YouTube also displays this behavior. It's even doing it on this page right now. Below this box I can read "The more information you can provide the better chance your question will be answered " , but directly below that in the next sentence I can see the start of it with "Troublshootin" and the "Automatically Add" in a green field covering the "g". The next clear text is "A window will open in the top corner. Click Allow, and then click Install. If the automated way doesn't work, try these manual steps." I tried turning of pre-fetching, clearing history, cookies, and cache, scanning for malware with Avast and Windows Defender all to no avail. It began when I upgraded from dial up to DSL via AT&T Uverse. I have a Motorola NVG510 modem. The modem was replaced an hour ago along with new dedicated lines and DSL/Phone splitter from the box by an AT&T technician to make sure my incoming lines were up to par. He ran a connection test and verified everything is up to standards. IE does not display this behavior. I am running Firefox20.0.1 and all previous versions have acted the same way since I upgraded to DSL about 3 months ago.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Is it possible to vary the colours of bars on a bar chart on the same axis?

Is it possible to vary the colours of bars on a bar chart on the same axis (I would like every cell value below 7 to be in red and above 7 to appear in green)?

Thank you for picking up on my question. I have subsequently found a conversation thread which gave me a solution. I found that I needed to create additional rows to accomodate values above or below the level that required a different colour and then use a stacked bar chart. The following shows what I needed to create. Apologies for wasting your time, but I only found the relevant conversation after posting my question.

How to display(binding) values in the table from more than one node?

Hi,
I have two nodes (TRIPS & AMOUNTS)in the context. How to bind these values into the table control?
When i bind second one, first one is getting replaced.

Hi Mog,
Of course it is possible to create a table from attributes of more than one node, and in some cases this is still necessary, but you have to do this the hard (manual) way.
If you have a table control, have a look at the properties and the elements belonging to it.
First of all, there is the property "dataSource", which binds to a multiple node (let's name it TableRootNode). This means that for each element of THIS node, one row is created. In each row the data of exactly one element of this TableRootNode is displayed.
Then you have columns in this table. Inside of the columns there is a header and an editor. The editor is the interesting part.
Normally the primary property of this editor is bound to an attribute of the TableRootNode. Then everything works as expected. If it binds to an attribute of a subnode (SUB) of TableRootNode, then in row i the data of the subnode of the i-th element of TableRootNode is displayed. There is no need for SUB to be a multiple node, but it must not be a singleton.
If you bind a property of the editor to an attribute, which does not lie in the subtree of TableRootNode, then you will see the same value in each row.
Now it depends on the structure of your context. Take the node, which is relevant for the change in each row (I assume it is TRIPS) and bind the table to the node as you are used to. Then for each additional column, you have to create a new column in the tree, create a new header element with a title and a new editor (e.g. textview or inputfield) and then bind the right property of the editor to the corresponding attribute in node AMOUNTS).
If these 2 nodes do not have parent-child-relationship, the tip to create a new node, which consists of the attributes of both nodes is the only solution.
Ciao, Regina

How I can display the values in one row when they come from the same colum

This query
SELECT
sorints_ints_code
FROM
saturn.sorints a,
connman.cc_adm_prospect_master
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = prospect_pidm
give me the results of
ZA
ZB
ZC
I want to use this query in a cursor to update a column in another table, the problem is that I need to update the table concatenating the values ZA,ZB,ZC
I have 24 different codes stored in the column sorints_ints_code, so I don’t want to use 24 different cursors and I don’t to use cross reference, It is there any way that I DON’T know to display the data like this za,zb,zc without using cross reference, I don’t want to use the table 24 times…
Like THIS, this is only for two values…
SELECT
a.sorints_ints_code,
b. sorints_ints_code
FROM
saturn.sorints a,
saturn.sorints b
connman.cc_adm_prospect_master
WHERE
a.sorints_ints_code = ‘ZA’
AND a.sorints_ints_code = ‘ZB’
and a.sorints_pidm = prospect_pidm
and b.sorints_pidm = prospect_pidm
REMEMBER, I have 24 different values
I am trying to write a procedure like this;
Someone suggest this v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
BUT IT IS NOT WORKING!!!
PROCEDURE prospect_coach_interest_upd
p_prospect_term_code IN srbrecr.srbrecr_term_code%TYPE,
p_prospect_admin_err_code OUT VARCHAR2,
p_ora_err_code OUT NUMBER,
p_ora_err_msg OUT VARCHAR2
) IS
v_out_path VARCHAR2(40) := '/home/connman/student';
v_out_file VARCHAR2(40) := 'cc_adm_prospect_'||p_prospect_term_code||'_'||TO_CHAR(SYSDATE,'YYYYMMDDHH');
v_file_handle UTL_FILE.FILE_TYPE;
v_pidm NUMBER;
v_int_code1 varchar2(30);
v_int_code2 varchar2(2);
v_int_code3 varchar2(2);
CURSOR cur_pidms IS
SELECT prospect_pidm
FROM connman.cc_adm_prospect_master
WHERE prospect_term_code = p_prospect_term_code
FOR UPDATE;
CURSOR interest_coach_cur is
SELECT
sorints_ints_code
FROM
saturn.sorints
WHERE
sorints_ints_code like 'Z%'
and sorints_pidm = v_pidm ;
interest_coach_rec interest_coach_cur%ROWTYPE;
BEGIN
UTL_FILE.FCLOSE_ALL;
v_file_handle := UTL_FILE.FOPEN (v_out_path, v_out_file, 'a');
UTL_FILE.PUT_LINE (v_file_handle,
CHR (10) || TO_CHAR (SYSDATE, 'DD-MON-YYYY HH:MI:SS')
UTL_FILE.PUT_LINE (v_file_handle, 'Entering the Admin Name procedure.');
--- BEGIN
FOR rec_pidms IN cur_pidms
LOOP
EXIT WHEN cur_pidms%NOTFOUND;
v_pidm := rec_pidms.PROSPECT_pidm;
v_int_code1 := v_int_code1||interest_coach_rec.sorints_ints_code;
IF interest_coach_cur%ISOPEN
THEN
CLOSE interest_coach_cur;
END IF;
OPEN interest_coach_cur;
FETCH interest_coach_cur
INTO interest_coach_rec;
IF interest_coach_cur%FOUND
THEN
UPDATE
connman.cc_adm_prospect_master
SET
PROSPECT_COACH_INTEREST = interest_coach_rec.sorints_ints_code
WHERE CURRENT OF cur_pidms;
END IF;
END LOOP;
COMMIT;
p_prospect_admin_err_code := '0';
UTL_FILE.put_line (v_file_handle, 'Successful Completion.');
EXCEPTION
WHEN OTHERS
THEN
p_prospect_admin_err_code := '1';
p_ora_err_msg := SUBSTR (SQLERRM, 1, 2000);
p_ora_err_code := SQLCODE;
END; -- prospect_coach_interest_upd;

Search in the forum or web you will find many solutions
Return multi-row result as one comma-delimited row
http://www.oracle-developer.net/display.php?id=412

How to display text value in the header data (Header text) of credit memo

Hi...
I need to display the text value of the text field in the header text of the header data in credit memo.
The text values are stored in a ztable and i need to display it based on the billing document stored in vbrk (zfield) that was inserted during the creation of credit request..
Appreciate your help on how to do this...
Thansk and will surely reward the points..
Kanthi..

Hi kanthi ,
Read the value from Z Table and during the creation of cedit memo check out for some exit where u the value from The zTABLE AND use function module SAVE_TEXT with object and id in the header text .
Please award if useful.

How to display Base values (AFS Grid) in the Report

Hi Friends,
We ar using AFS, in that we have Grid value like 0003A34
(8 chars: first 4 chars colour (0003), A represents Cup, 34 represents size of the Material), in that we can able to store the Base values like for International or US,
and for size 34 equivalent to 70 like wise.
In our reports we are using ALV grids, and showing the existing grid value like 0003A34, but we need to show Base value list like INTL or US etc, based on the region / area, the report should show the equivalent grid value like 0003A70 etc.
Please help me how to do this.
Thanks
Shankar

Dear Shankar;
I think you will be able to achieve what you try to do using grid conversion in AFS. Base Grid values can be converted to other values based on the customer, vendor or material depending on your requirement. This need to be configured in IMG and then the ID must be assigned in the Vendor or the Material Master as per the requirement.
This is somewhat complex config. Please contact me if you need any more clarifications ([email protected])
Azwath Mohammad
http://www.sapafs.net

How to display Zero values in the chart

Hi,
In BO design studio 1.3 we are using bar chart and line chart for one of the dashboard. we have enabled the data labels and data is also displaying in the chart, but for certain criteria the data is itself zero in the database. In such scenario chart is not showing zero as the data label and it is simply blank. Is there any way to display the values even though it is zero?
Thank You,
Palani.

Hi - I don't see a way to do that; if you want that in the future I recommend posting something on Idea Place - ideas.sap.com

How to display field value only once in REUSE_ALV_GRID_DISPLAY

hi experts,
               i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve it

Hi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
    carrid   TYPE sflight-carrid,      " Carrier Id
    connid   TYPE sflight-connid,      " Connection No
    fldate   TYPE sflight-fldate,      " Flight date
    seatsmax TYPE sflight-seatsmax,    " Maximum seats
    seatsocc TYPE sflight-seatsocc,    " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
   STANDARD TABLE
         OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
         LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight.            " Getting data for display
PERFORM create_field_cat.            " Create field catalog
PERFORM alv_display.
*&      Form create_field_cat
      Subroutine to create field catalog
      There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING   'Carrier Id'    'CARRID'   '2'.
PERFORM fill_fieldcat USING   'Connection No' 'CONNID'   '1'.
PERFORM fill_fieldcat USING   'Flight Date'   'FLDATE'   '3'.
PERFORM fill_fieldcat USING   'Maxm.Seats'    'SEATSMAX' '4'.
PERFORM fill_fieldcat USING   'Seats Occ'     'SEATSOCC' '5'.
ENDFORM.                                    "create_field_cat
*&      Form fill_fieldcat
      Subroutine to fill data to field column
     -->p_seltext      Column label
     -->p_fieldname    Fieldname of database table
     -->p_col_pos      Column position
FORM fill_fieldcat USING
                    p_seltext    LIKE fs_fieldcat-seltext_m
                    p_fieldname LIKE fs_fieldcat-fieldname
                    p_col_pos    LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos    = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM.                    " fill_fieldcat
*&      Form get_data_sflight
      Subroutine to fetch data from database table
      There is no interface parameter
FORM get_data_sflight .
SELECT carrid
         connid
         fldate
         seatsmax
         seatsocc
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid IN s_carrid.
ENDFORM.                    " get_data_sflight
*&      Form alv_display
      Subroutine for ALV display
      There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      it_fieldcat   = t_fieldcat
    TABLES
      t_outtab      = t_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " alv_display
End of code

How to display the value of a column in a chart at the top of each column

Similar Messages

Maybe you are looking for